I am getting "no firewire ports found" error...

I freshy installed Snow Leopard 10.6.8 on a mid 2010 macbook pro. I did this after it had been upraded to Yosemite and the firewire port was not working. i have tried resetting pram and every other thing that has been suggested.
the closest discussion to my problem is thisAfter 10.6.2 update, 'No FireWire ports were found'
i do not have access to previous kext files to replace the ones on this machine now whcih fixed that users problems, has anyone else encountered this problem and know a fix? or has access to previous kext files?
the firewire port still sends power, as when i plug in an external it flashes for a split second and starts spinning up, it is just not recognized by the computer.
Mid 2010 Macbook Pro 7,1
2.4GHz Intel Core 2 Duo
4gb 1067 MHz DDR2

If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing. Use 2nd link if not near an Apple Store or aren’t in the US. Hardware Repair - Keeping Confidential Data Safe
Genius Bar Reservation US
Authorized Service Provider

Similar Messages

Quicktime gets a file not found error in running of set up. tried downloading twice

Quicktime gets a file not found error in running of set up. tried downloading twice

Hi Spex,
I can import the VI Logger task OK (from another PC running VI Logger 2.0), but I can't run the task. I've attached the file. The "1 channel" task runs OK. The "x-probe" task starts, takes 1 or 2 data points, then hangs for a few seconds, then pops up the "file not found" error. The data acquisition taks run OK, so I don't think they're the problem.
This file I've attached includes 2 good data tasks ("1 channel" and xprobe"), 1 good VI Logger task ("1 channel"), and my non-working VI Logger task ("x-probe", which works fine on the PC it was exported from).
I have also tried exporting the non-working VI Logger task on its own, and it still imports OK, but still doesn't run, and gives the same error.
Thanks,
Jake
Attachments:
configData1.zip ‏353 KB

I was stupid enough to try to update my iTunes, now I'm getting Entry Point not found error:

I was stupid enough to try to update my iTunes, I have troubles every single time i've tried to do this. In the past I've been able to fix it using the support forum, not this time. So now I'm getting Entry Point not found error:
The procedure entry point ADiAdID_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll
I've uninstalled, and reinstalled MULTIPLE times. Removed all apple related components, ran as administrator, repaier .net frame etc etc etc....
Still get this error when opening itunes. And after I close that error, I receive Error 7 - itunes was not installed correctly....please reinstall.
WHY is this ALWAYS such a pain? Andriod phone here I come...

See Troubleshooting issues with iTunes for Windows updates.
Try the repair tip in the third box first.
tt2

When i try to share a movie to idvd from imovie i get a file not found error

when i to share a movie from imovie to idvd i get a file not found error can anyone help?

Hey ninimac!
Here is an article that can help you troubleshoot this issue with burning DVDs in iDVD:
iDVD: Troubleshooting issues with burning discs
http://support.apple.com/kb/ht1583
Thanks for using the Apple Support Communities!
Cheers,
Braden

Integration Directory : getting 404 Page not found error while accessing In

Hello,
When i am trying to open the Interation Directory, it is showing me 404 Page not found Error.
Some Description
- Executing sxmb_ifr,
- From http://erpsys07:50300/rep/start/index.jsp,i am getting mentioned error when i am trying to access Integration Directory from URL.
erpsys07 -> Central SLD -> J2ee Port - 50100
erpsys07 -> PI system -> J2ee Port - 50300
When i am clicking on integration directory link, it is pointing to Central SLD J2ee Port (50100) instead of 50300, it is pointing to
http://erpsys07:50100/dir/start/sso/Directory.jsp instead of http://erpsys0750300/dir/start/sso/Directory.jsp.
Could some help me where to change and what to change?
Thanks,
V.SINGH

Have you checked port in Netweaver Administration?
See which port is mentioned there. (If you are using PI 7.1)
Check in SXMB_ADM transaction, and in your RFC Destination, where it is pointing.
Thanks,
Hetal
Edited by: hetal shah on Nov 24, 2009 4:49 PM

Getting 104 resource not found error, when deploying my first servlet

Hi,
I am new to servlets, and after doing little home work i have created a small servlet but i am i getting http 104 resource not found error.
steps i followed:
1) installed pre-configured version of tomcat from http://www.coreservlets.com/Apache-Tomcat-Tutorial/.
2)created new directory called ch1 under webapps, created WEB-INF under ch1
3)included web.xml, classes in WEB-INF directly
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_5.xsd"
version="2.5">
<servlet>
<servlet-name>Ch1servlet</servlet-name>
<servlet-class>Ch1servlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Ch1servlet</servlet-name>
<url-pattern>/servlet</url-pattern>
</servlet-mapping>
</web-app>
4) included .class file under classes folder from following Ch1servlet.java file, I have set class path to point to servlet-api.jar file and jsp-api.jar and compliled following java file to get .class file which is included in classes folder
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class Ch1servlet extends HttpServlet
public void doGet(HttpServletRequest request,HttpServletResponse response)throws IOException
response.setContentType("text/html");
PrintWriter out=response.getWriter();
java.util.Date today=new java.util.Date();
out.println("<html>"+
"<body>"+
"<h1 align=center>HF\'s Chapter1 Servlet</h1>"
+"<br>" + today + "</body>" + "</html>");
5) I am started tomcat server and when typed http://localhost( changed port from 8080 to 80), its giving tomcat page and not showing any error
6) When i typed http://localhost/ch1/servlet/Ch1servlet, its giving http 404 error
type Status report
message: /servlet/Ch1servlet
description: The requested resource (/servlet/Ch1servlet) is not available.
7) i have uncommented(it comes preconfigured) the invoker part in web.xml.
I have tried including servlet in an package and without package
I am not sure if its problem with server configuration orelse problem with my file placing.
Please let me know if you have any idea what went wrong.

I found this, unable to copy it, so i am typing it:
Feb11,2008 11:55:57 AM org.apache.catalina.core.AprLifecycleLIstener init
INFO: The Apache Tomcat Native Library which allows optimal performance in production environemnt was not found on the java.library.path:c:\program Files\Java\jdk1.6.0\bin;....
last line says
org.apache.cataline.startup.catalina start
INfo: Server startup in 657ms

JDeveloper 11.1.1.3 - "No view port found" error in ADF task-flow

Hi,
My customer uses JDeveloper 11.1.1.3.
They are developing jspx using ADF task-flow.
They see following errors in stdout log when the view in the page was changed.
But their application seems to work correctly after the errors.
Does anyone know how to solve these errors?
Or, does anyone know whether these errors affects ADF(or JSF) applications, or not?
If these errors don't affect to them, they will consider ignoring these messages for now.
<ControllerState><getViewPort> ADFc: No view port found with ID '6h7oee2m2_9'.
<ControllerState><getViewPort> ADFc: No view port found with ID '6h7oee2m2_9'.
<ControllerState><getViewPort> ADFc: No view port found with ID '6h7oee2m2_13'.
<ControllerState><getViewPort> ADFc: No view port found with ID '6h7oee2m2_13'.
<ControllerState><getViewPort> ADFc: No view port found with ID '6h7oee2m2_9'.
<ControllerState><getViewPort> ADFc: No view port found with ID '6h7oee2m2_9'.
Any pointers on this are appreciated.
-Noriyuki
Edited by: nori524 on 2011/01/13 0:01

Wes,
1) is documented at http://docs.oracle.com/cd/E35521_01/web.111230/e16181/af_reuse.htm#autoId21
2) and 3) I personally have not stumbled upon, but if you have a reproducible test case you should open an SR or make an entry in the ADFEMF issue tracker (http://java.net/jira/browse/ADFEMG side is currently down :()
Timo

Discovery Box service is getting Failed - Path not found error

Hi,
when i am starting the discovery box SAP services from management console it is getting failed. The trace error is
Starting WebService thread
SapSSLInit failed => https support disabled
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_00
Webservice thread started, listening on port 50013
IWDFVM2160\erpadm is starting R/3 System at 2008/03/17 12:39:39
SAP-R/3-Startup Program
Starting at 2008/03/17 12:39:39
Startup Profile: "D:\usr\sap\ERP\SYS\profile\START_SCS00_iwdfvm2160"
Starting Programs
*(828) CreateProcess(D:\usr\ERP\SYS\exe\uc\NTI386\sapcpe.EXE) failed(3). ERROR_PATH_NOT_FOUND: The system cannot find the path specified. *
(5016) CreateProcess: D:\usr\sap\ERP\SCS00\exe\msg_server.EXE pf=D:\usr\ERP\SYS\profile\ERP_SCS00_iwdfvm2160
(5024) CreateProcess: D:\usr\sap\ERP\SCS00\exe\enserver.EXE pf=D:\usr\ERP\SYS\profile\ERP_SCS00_iwdfvm2160
Here it shows the path "D:\usr\ERP\SYS\exe\uc\NTI386\sapcpe.EXE" and it should be " D:\usr\SAP\ERP\SYS\exe\uc\NTI386\sapcpe.EXE"
Please advice - how to change this
Thanks in advance
Regards
-Siva

Hi,
Please ensure that the navigational attribute is checked at the attribute level and also at the Infocube level and also check that correct mapping of this navigational attribute is done at the Multiprovider level.
Thanks,
Venkat

"No supported USB 3.0 ports found" - Error while using Kinect v2

I recently bought the Xbox One sensor and the Kinect adapter for Windows
for application development. I am using a Gigabyte 970a DS3P mobo with onboard USB 3.0 ports. Processor - AMD FX6300, RAM - 8GB, GPU - Nvdia GT730 2GB DDR3(Direct X11 compatible). When I am running the Kinect Configuration Verifier
Tool two things come in red.
First, it says - "No supported USB 3.0 ports found" even though I have connected the sensor to USB 3.0 ports.
Second it also says - "Insufficient depth frames received".(or insufficient frame rates, something like this)
Third - The sensor stays on for few seconds and goes off and comes back on. This happens all throughout.
Lastly - While running the SDK samples Audio Basics(anything related to audio) and Color Basics(anything related to Color camera) never work.
Kindly let me know what all changes I need to make in order to get full performance from my sensor. Also if this is related to a dedicated USB 3.0 Controller issue please explain how I can implement that in my present system.
Will using a USB 3.0 PCIe expansion card help? If yes then which brand/model that will be compatible with my mobo.
Note:- I don't connect to the internet while using my Kinect sensor and have no other devices on the second USB 3.0 port that I have.

yes, see the following links for more information on the issue you are having:
https://social.msdn.microsoft.com/Forums/en-US/20dbadae-dcee-406a-b66f-a182d76cea3b/troubleshooting-and-common-issues-guide?forum=kinectv2sdk
https://social.msdn.microsoft.com/Forums/en-US/bb379e8b-4258-40d6-92e4-56dd95d7b0bb/confirmed-list-of-usb-30-pcie-cardslaptopsconfigurations-which-work-for-kinect-v2-during?forum=kinectv2sdk
Carmine Sirignano - MSFT

Getting "QueueConnection" file not found error in IOS

Hi All,
Iam using SUP 2.1 ESD #1, in have tried the sample SUP101Sample in IOS, but it is showing the "QueueConnectionu201D file not found error. can anyone help to resolve this.
Thanks,
B.Ushasri

Can I ask what version of iOS you are using? Have you been able to compile youre code?
Thanks
Ian

After upgrading to v 3.6.3 I get a "node not found" error whenever I try to exeute a link found by Google. I am running wind 7 64-bit Home Premium. Yahoo works fine. Can anyone tell me what is happening?

I have recently installed 3.6.3 on a new machine running win 7 64-bit Home Premium. When I do a Google search and click on a link resulting from the search I get a "JavaScript Application Debug Error" followed buy a lengthy description (which I cannot copy to the clipboard). I cannot close the dialog box so the only solution is to close down Firefox and restart it. Any help gratefully appreciated!
== This happened ==
Every time Firefox opened

I have recently installed 3.6.3 on a new machine running win 7 64-bit Home Premium. When I do a Google search and click on a link resulting from the search I get a "JavaScript Application Debug Error" followed buy a lengthy description (which I cannot copy to the clipboard). I cannot close the dialog box so the only solution is to close down Firefox and restart it. Any help gratefully appreciated!
== This happened ==
Every time Firefox opened

Can I Get IEEE Firewire Ports?

Can I get this or somehow get it on a T500? Or somehow in a expansion?
I need 4 pin or 6 pin.
Thanks.

you can get a firewire PCMCIA or ExpressCard Expansion card for 20 USD or so.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Most search engines are not working, only Google Search works and I get 404 file not found error when clicking the links.

I have been trying virus killers, malware software from microsoft, I uninstalled Firefox and reinstalled it, I used the option to change all my options to the basic default installed options, I am able to search without problems using Internet Explorer on all search engines, Google Search engine works in firefox browser; but all the links give the 404 file not found error. Links from my Gmail account do not work either...giving me the 404 error. Firefox is much faster than Internet explorer however, this link problem makes me wonder if firefox is really any good.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

Keep getting VncViewer.class not found error when trying to use Windows 7

Greetings,
I have no issue accessing the OVM Manager 2.2 with OEL 5.4 x86_64 with the latest Java release from ULN. But when I use a Windows 7 client ( x86) with the Sun Java 6 Update 18 I get the following error when trying to access the Console of a VM Guest:
Java Plug-in 1.6.0_18
Using JRE version 1.6.0_18-b07 Java HotSpot(TM) Client VM
User home directory = C:\Users\deverej
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
load: class VncViewer.class not found.
java.lang.ClassNotFoundException: VncViewer.class
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed:http://141.144.112.202:8888/OVS/faces/app/VncViewer/class.class
     at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 7 more
Exception: java.lang.ClassNotFoundException: VncViewer.class
I am curious fi I should use only a specifc Java Engine with IE 7 or the latest Firefox browers.

Same issue to with Windows XP SP3 x86 with Java Runtime Enviornment 1.5.0_15
J2SE Enviornment 5.0 Update 15
Java 6 Update 17

Show Database Get "Object was not found"error

Hi there,
I have a weird situation here.
I created Data Guard Broker setup and show configuration return good result.
It is running for quite a while, and I can see if I switch log file on Primary, the Max Seq# is matched between Primary and Standby. Also do a lot of other test query all return good result.
But today when I happen to run Show Database command it says the DB object not found,
and there is no error in DRCxxx.log file.
Did I miss something? Any suggestions are appreciated.
===============Script===================
--Standby
mkdir log1/dgbroker
mkdir log1/dgbroker/XXXPRD2R
mkdir log2/dgbroker
mkdir log2/dgbroker/XXXPRD2R
--Primary
mkdir log1/dgbroker
mkdir log1/dgbroker/XXXPRD2
mkdir log2/dgbroker
mkdir log2/dgbroker/XXXPRD2
-- primary
alter system set dg_broker_config_file1='/oracle/log1/dgbroker/XXXPRD2/dg1XXXPRD2.dat' scope=both;
alter system set dg_broker_config_file2='/oracle/log2/dgbroker/XXXPRD2/dg2XXXPRD2.dat' scope=both;
-- standby
alter system set dg_broker_config_file1='/oracle/log1/dgbroker/XXXPRD2R/dg1XXXPRD2R.dat' scope=both;
alter system set dg_broker_config_file2='/oracle/log2/dgbroker/XXXPRD2R/dg2XXXPRD2R.dat' scope=both;
-- primary
alter system set dg_broker_start=true scope=both;
-- standby
alter system set dg_broker_start=true scope=both;
-- primary
dgmgrl /
create configuration 'dg_XXXPRD2' as primary database is 'XXXPRD2' connect identifier is 'XXXPRD2';
add database 'XXXPRD2R' as connect identifier is 'XXXPRD2R' maintained as physical;
enable configuration;
===============Script===================
DGMGRL> show configuration
Configuration - dg_XXXPRD2
Protection Mode: MaxAvailability
Databases:
XXXPRD2 - Primary database
XXXPRD2R - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
SUCCESS
DGMGRL> SHOW DATABASE XXXPRD2
Object "XXXPRD2" was not found
DGMGRL> show database XXXPRD2R
Object "XXXPRD2R" was not found
-----------------------------------------------

Hello;
What I have noticed is sometimes single quotes count and sometime they don't.
Try :
SHOW DATABASE 'XXXPRD2';
Test
Welcome to DGMGRL, type "help" for information.
Connected.
DGMGRL> show database standby
Object "standby" was not found
DGMGRL> show database 'standby';
Object "standby" was not found
DGMGRL> show database 'STANDBY';
Database - STANDBY
Role:            PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag:   (unknown)
Apply Lag:
Real Time Query: OFF
Instance(s):
    STANDBYSo getting the case matters too.
DGMGRL> SHOW DATABASE STANDBY;
Object "standby" was not found
DGMGRL> Best Regards
mseberg
Edited by: mseberg on Jan 18, 2013 2:21 PM

I am getting "no firewire ports found" error...

Similar Messages

Maybe you are looking for