I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?
I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?
The firewire port reads the dj software and I can hear music playing through the sound card when I plug my headphones into it but there is no signal to the hardware (my dj mixer).
I have reset the firewire by turning off my mac book pro for a few hours and can see the sound card device in the fire wire section after clicking on the apple icon on the top left corner of my mac.
My dj mixer works on another mac computer with the same soundcard and different firewire cable.
Hope someone can help
Thanks
Wayne
kmiddlet88,
yes, it could be due to nearly anything listed in your kernel extensions, startup items, launch daemons, launch agents, or user items above. Please check all of your installed third-party software to make sure that the versions which are installed on your MacBook Pro are compatible with Mavericks; uninstall every software package which isn’t Mavericks-compatible. After you’ve done that, boot into Safe mode, and see if you still get the beach ball of doom there. If it doesn’t appear there, restart normally and see if it appears then.
Similar Messages
-
I am using FCP 7.0.3 on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?
.. and by the way, the jump from FCP 6.0.3 to FCP 7.0 (or higher) isn't an "update" It's a full version "upgrade" that has to be done using the install discs (or disc images).
-DH -
I have tried to install Creative Cloud but I just get a blank white screen with a black Creative Cloud bar at the top. There are no options to choose 'Apps' etc. Can anyone help?
What happened yesterday may have been caused by the SOPA protest action that was joined by a lot of sites yesterday and such an action won't happen that often.
* http://en.wikipedia.org/wiki/Wikipedia:SOPA_initiative/Learn_more
*http://en.wikipedia.org/wiki/Wikipedia:Bypass_your_cache -
I am trying to upgrad the hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive. I can only get so far throughj the process where its about to start cloing when I get a message " error 254". Any idea what that means and how do I get around this issue so I can use my new hard drive? Thanks for your input.
VinceConnect the HDD to your MBP. Open Disk Utility>Erase and drag the HDD icon inrt the Name field. The format should be Mac OS Extended (Journaled). Click on the Erase button.
Then try the clone process again. You may use Disk Utility>Restore or a third party cloning application such as Carbon Copy Cloner or Super Duper.
Ciao. -
Hi there. just bought a TC, installation was succesfull, but time machine won't work. can't select Backup disk. get transferred to TC install again. Called Apple, 25 min. later no succes, have to call on monday again!!!! Can anyone help me? Thanks a lot.
See #Q1 in Using Time Machine with a Time Capsule.
If you have a problem, please tell us exactly what, and on which step there. -
I just bought my first MacBook Pro a few days ago. I can't seem to get my PC to see my MacBook Pro on the network. Can anyone help me get my PC to see my MacBook Pro on my network t?
Thanks,
AlexForgot Your Account Password
For Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and
OS X Lion- Apple ID can be used to reset your user account password. -
gmail on iphone was working fine until yesterday when it prompted me with the message "cannot get mail user name or password for gmail is incorrect", i have tried deleting the account and re-created a new account, same problem, can anyone help?
paulcb, you're a genius, it worked, thank you so much, you don't know how much stress you have taken off my shoulders, I am constantly on my email in my iphone everyday. Thanks a million, take care. Robert.
-
My 3G unlocked iPhone is not syncing mail or contacts from my mac book pro, using Lion. I am able to get a calendars and music, only. I get the message that I need to reset the password which I have done 3x's on the phone and on the Apple server.
Good to know that, but what can I do to get the mail and contacts downloaded from Icloud onto my Iphone? I am told that the password needs to be reset and I have erased and reset it 3x's already? Should I Restore All Settings or Restore Network Settings or will that result in a situation where I have to have it re-unlocked again? GRACIAS!
-
When I try to send an email I get the message rejected by the server because it does not allow relaying. I have sent mails for months with no problems but has started to be recoccuring. Can anyone help please as its pointless having email on my phone otherwise :-( as i have to wait till i log on at home to respond.
thanks
Alisonhttps://discussions.apple.com/message/16832350#16832350 follow the link user was having same problem. Solution was given.
-
Ok so I am sure I have everything set up correctly,
Logic has recognised and is using the mixer, I have sound coming through the headphones when I put in a drum sample onto audio track, no signal going in from audio using the first channel. Audio channel is set up with correct inputs & outputs. USB setting used on mixer......phantom tried on and off with the condenser mic I am using.....still no luck not even changing from mi to guitar. No signal when recording audio...... AAAHHH HELP! Racking my brains!
Thank you in advanceKudos to figuring it out yourself.
Yes, Logic is geared to the professional user, you will need to set up the program to your particular way of working, Logic was well developed for professional use long before Apple purchased it, it's not an Apple program per se. It's complex and offers a myriad number of choices so that it can be configured to many styles of working, there's often 3 or 4 ways to perform the same function.
Logic insists the user educate themselves... which is a good thing.
Here ya go!
http://documentation.apple.com/en/logicpro/
"Exploring Logic Pro" is a good one to start with.
Also in the main manual... "Setting Up Your System" -
I can't get a picture on my toshiba tv when I connect it to my Mac Book Pro using an HMDI cable
In 2010, we bought a MacBook Pro 7.1. We also bought an HDMI cable that connects directly to the MBP’s mini display port and to the HDMI port in the TV. The TV is a Toshiba. We made the connections and selected the correct ports and got nothing on the TV, except a “no signal” message. The Display window on the MBP recognized the Toshiba TV. We tried the same hookup with a different TV (Phillips) and we got video (no sound) on the TV with the same mini display port to HDMI cable. We borrowed a mini display port to VGA adapter with a VGA cable. The adapter also had a separate audio cable that connected to the TV’s audio port. That worked. We got both video and audio on the Toshiba (but the video was not HD). We connected my Kindle Fire HD to the Toshiba using an HDMI cable, and that worked. We got both video and audio on the Toshiba. So, we proved: - the mini display port works - I can get video from it to the Toshiba with a VGA adapter - the mini display port to HDMI cable works – I got video through it from the MBP to the Phillips - the HDMI port on the Toshiba works – I got video / sound from the Kindle and its HDMI cable What do I do to get video from the MBP to the Toshiba using the HDMI cable I have?
Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
Read the tv user manual. I have a Toshiba which has detailed instructions for tv to comp hookup. If necessary call Toshiba. Especially, if you are still under warranty w/them. -
The latest version of iTunes did not install properly on my Windows 7-64bit PC. I am getting the following error message: "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services."
I have tried the following troubleshooting steps without success:
Restart PC
Uninstall iTunes and attempt to reinstall
Verify that I am signed in as an administrator
Download and save iTunes64Setup file, right-click, and run as Administrator
Disable Norton antivirus software
Any suggestions would be greatly appreciated!Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
I cannot get this macbook pro to connect to ebay. Other apple computers in my house on same network will but this one will not. This one will connect to any other site, but not ebay. Thoiguhts?
Try using OpenDNS servers:
System Preferences>Network>Advanced>DNS.
Click on the + in the left side column and add the following:
208.67.222.222
208.67.220.220
Click OK, then click Apply
BTW one post is sufficient. Two clogs the servers. -
Mac Book Pro, Bad disk but I can't get the install DVD to work
I have a 13" macbook pro that started to have problems with different apps. They would crash immediately when you clicked on them. I ran disk utility repair permissions and everything was ok but when I went to verify the disk it reported that the drive was corrupt. I bought a new drive, installed the drive and inserted the Install DVD that came with the machine. After a few minutes I get a message "You need to restart your computer. Hold down the power button...." I tried using a Leopard install DVD and same problem. Originaly this machine came with SL but I figured since I am using a new disk (unformated I assume) that any OS install DVD would get me formatted and back to a point where I could connect with Time Machine and restore. I swapped out the RAM, HDD cable and DVD drive with another MPP with the same results. Any thoughts would be appreciated.
Thanks OrangeMarlin.
I have several MPP's. The one that is failing originaly came with SL. I don't have an SL disk so I attempted to use a Leopard to install a brand new disk drive. I would have thought that it didn't matter if it was SL or Leopard since it was a new disk (no reference of what was on it before). I could see an issue with compatability between a Intel OS on a G5 but SL vs Leopard on an Intel MPP should be OK. Thoughts?
The install DVD I am using "should" be the correct disk. I understand the sensitivity of using the disk that came with the machine. The reason I think this it is the ocrrect disk is it says 13" MPP and 10.6 for the OS which fits the description of what this machine had on it when it was purchased. I don't believe I have any other 13" machines with SL.
I also ran the diagnostics last eve. All passed.
I'm thinking of putting a working 10.5 disk from another machine into the failing machine and running Verify from the disk utility to see if I get the same error. If so, I would assume my disk controller is bad and need a new motherboard. -
HT204032 I have a mac book pro, and mountain lion software. How can i get power nap?
h
Macs that use Power Nap
The MacBook Air (Late 2010, Mid 2011, Mid 2012) and MacBook Pro (Retina, Mid 2012) running Mountain Lion can use Power Nap.
http://support.apple.com/kb/HT5394
Maybe you are looking for
-
Workcenter overload during MRP run
Dear All. Hi, While MRP run using MD01, if there is a overload in a workcenter, using lead time scheduling & capacity planning can we stop the propsed plan & change the plan accordingly in the same screen. Subbu.
-
Purchase Organisation field mandatory in ME21N
Dear All, Is it possible Purchase Organisation field is mandatory in PO(Me21N), i have checked in spro define screen layout at document level; wise but there is no Purchase organisation field. please guide me, Thanks Shital
-
Discontinued parts in BoM explosion reports
I am having difficulty with the BoM explosion reports (CS11-13, and CSP1-3), in that they seem to take no notice of discontinuation. In particular we have some assemblies which are discontinued, and replaced by alternative parts with a different sub
-
Same Measure from the Fact table to be calculated with 2 different logic.
Hi, I have a BookingsFact having a measure field as BookedWeight and Foreign keys PlantDimKey , DateDimKey, OrderItemDimKey In the Pivot table report the data(BookedWeight) for the Plants have to be grouped based on the below criteria: 1. If the Plan
-
Help with Powershell - moving files to folders based on date
I have spent about a week on this task, and I know I am nowhere near an expert on Powershell, I am running into a wall. Here is what I want to accomplish - I have a folder with 1000's of files going back three years. I want to write a PS script that