I am getting ORA-02063 error while copying bulk data from DBLINK
Hi all ,
I am trying to copy data from DBlink ,whenever i am trying to pull more data ,The db link break down ,
I have try to put /*+ APPEND */ (Hint) in insert statement.Below is the insert code from my procedure
from where i am getting below error
"Error in copy_data_pkg-3113 ORA-03113: end-of-file on communication channel
ORA-02063: preceding line from TESTDBLINK"
Insert code:
INSERT /*+ APPEND */ INTO target_tab
select
col1,
col2,
col3,
col4,
col5,
o_time
FROM padmin.V_tab1@testdblink
where
trunc (sysmodtime) = trunc(sysdate)-1
and O_time >= al_time
and (CLEAR_TIME is null or CLEAR_TIME >= occur_time)
and (res_code is null or (UPPER(res_code) not LIKE '%TEST TT%' and UPPER(res_code) not LIKE '%TEST SITE%'))
and ((UPPER(BRIEF_DESC) not like '%TEST TT%' and UPPER(BRIEF_DESC) not LIKE '%TEST SITE%'))
and (o_time+(330/(24*60))) <= trunc(SYSDATE)-1/24/60/60
and catvar IN('POS')
and UPPER(action_var) not like '%SC_NET%' and UPPER(action) not like '%ROAM_NET%' and UPPER(action) not like '%PUP_NET%';
COMMIT ;
Please suggest me ,why i am getting this error.
Can you elaborate the thing... I don't think /*+ APPEND */ this is working for me ,still I am getting same error.
If you have any other suggestion,I would like to hear.
Should i not put commit after some 500 records inserted ? As i am putting commit once after whole data gets inserted.
Similar Messages
-
Error while retrieving bulk data from mdm in staging server
I am getting an error while retrieving bulk data from MDM. The error goes like this "NiRawReadError: An error occured when reading data from socket.".
Could anyone please suggest me about the possible cause of this error. Please reply soon.
Moderator message: network error, relation to ABAP development unclear, please search for available answers, check with system administrators, consult SAP service marketplace.
Edited by: Thomas Zloch on Nov 22, 2010 5:16 PMCan you elaborate the thing... I don't think /*+ APPEND */ this is working for me ,still I am getting same error.
If you have any other suggestion,I would like to hear.
Should i not put commit after some 500 records inserted ? As i am putting commit once after whole data gets inserted. -
No data Exists error while retrieving the data from a table
Hi Everyone!
I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding thisHi !
thanks for ur response...
I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake.... -
Error, while pushing the data from Oracle to MSSQL.
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.[email protected] wrote:
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.This is an error from SQL Server being passed back to Oracle so you can see the problem.
What it is saying is that you are trying to insert (or update) data to a database view and that view contains a column that is either a constant (literal) value or is derived (a calculation, formula or string concatenation etc.).
As such, you can't insert or update data on that column because it has nowhere to go on the database table(s) that underly the view. -
Getting ORA-01429 error while changing character set
When I am changing character set from WE8DEC to AL32UTF8, I am getting ORA-01429 error
SQL> ALTER DATABASE CHARACTER SET INTERNAL_USE AL32UTF8 ;
ALTER DATABASE CHARACTER SET INTERNAL_USE AL32UTF8
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01429: Index-Organized Table: no data segment to store overflow row-piecesChockalingam wrote:
I am using above steps as per oracle doc only.
http://docs.oracle.com/cd/B10500_01/server.920/a96529/ch10.htm
No, you are not.
- You are not using the correct version doc vs. Oracle server version. Try to find the same suggestion in the relevant doc.
- The doc you reference specifically says "... it can be used only under special circumstances. The ALTER DATABASE CHARACTER SET statement does not perform any data conversion, so it can be used +if and only if the new character set is a strict superset of the current character set+." (emphasis is mine)
You do not have a strict superset.
- Also the special clauses you have used are not documented - for a reason.
Please edit your posts above to remove the ill-advice (steps with internal use only clauses) that does not belong on a forum.
Edited by: orafad on Mar 16, 2012 9:47 PM -
ORA-27092 Error while executing any query from client
Hello
I am getting following error while executing any query from client remotly.
IAMDBA@TEST_OAT.ABCD > select userid from dual;
select userid from dual
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01116: error in opening database file 1
ORA-01110: data file 1: '/u01/prod/system/system01.dbf'
ORA-27092: size of file exceeds file size limit of the process
Additional information: 131071
Additional information: 286209
But while local connection,its working.hi,
ulimit command- Limit user resources
su - oracle
ulimit -n (this command will show you the current value for ulimit the default value is 1024)
to increase its value:---
ulimit -n <some value> ( this command will change value for current session only)
example
ulimit -n 101062
once done check the value as:--
ulimit -n( for verification)
search in google for more explanation or revert back to me for any suggestions.... :)
Edited by: varun4dba on Jan 31, 2011 4:09 PM -
Error while loading the data from PSA to Data Target
Hi to all,
I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document posted
Info IDoc 2 : Application document posted
Info IDoc 1 : Application document posted
Info IDoc 4 : Application document posted
Info IDoc 3 : Application document posted
Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
Update PSA ( 2462 Records posted ) : No errors
Transfer Rules ( 2462 -> 2462 Records ) : No errors
Update rules ( 2462 -> 2462 Records ) : No errors
Update ( 0 new / 0 changed ) : Errors occurred
Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
SaranHi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM -
Error While Testing the Data from RWB
Hi Gurus,
While testing the data from my RWB --> Component Monitoring -->IE -->Test Message
I am getting the error as explained below:
Error while sending Message -->RWB
No header Mapping Defined -->Trace
Moreover when i was assigning Inbound Interface in the Interface Determination its shows in the popup window NOObjects Found instead of showing the Inbound interfaces.
Any help on this please
Regards
SreeniHi ,
without completing your configuration how are you testing your interface??
1)you need to add your source and receiver interfaces in business service,select your business service then add your outbound interface in sender tab and add your inbound interface in receiver tab,if it is business system not required.
2) then check your interface/operation mapping done perfectly between source and target interfaces.
if you have above steps done perfectly then your interface will work.
if you still getting error search in sdn with error message you will find usefull tips..or post in sdn.
Regards,
Raj -
Error while retracting the data from BW system
Dear all,
while retracting the data from BW we are getting the below dump
"Inconsistent entry in table TKA07 (Plan Version Maintenance)",Request you to please help to solve the issue
Thanks,
JyotiJyoti,
Could you please explain in detail, were you using any standard retractor or custom?
is it erroring out in ECC system or BI? -
Error while loading the data from text file
Hi,
I got an error " Data Value Encountered before all Dimensions selected" while loading the data from the text file.
Can any one please suggest me the solution.Possible Solutions
Make sure that the data source is valid.
Is a member from each dimension specified correctly in the data source or rules file?
Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
Does the data source contain extra spaces or tabs?
Has the updated outline been saved? -
Getting "ORA-12514 error" while connecting first time
Hi,
Getting below error while connecting to the database first time.
ORA-12514: TNS:listener does not currently know of service requested in connect
apludc01dat25:e2cmpc1 > tnsping ora37_ap
TNS Ping Utility for Linux: Version 10.2.0.5.0 - Production on 26-MAR-2012 12:00:58
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
/grid/product/crs/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = apl11764clu01-scan-oravip.nat.bt.com)(PORT = 61901)) (CONNECT_DATA = (SERVICE_NAME = ORA37_ap))
OK (0 msec)
apludc01dat25:e2cmpc1 > sqlplus
SQL*Plus: Release 10.2.0.5.0 - Production on Mon Mar 26 12:00:15 2012
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Enter user-name: outln@ora37_ap
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Enter user-name:
apludc01dat25:e2cmpc1 > sqlplus
SQL*Plus: Release 10.2.0.5.0 - Production on Mon Mar 26 12:00:22 2012
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Enter user-name: outln@ora37_ap
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
SQL>
Please help me out to resolve this issue.
Thank you.
Regards,
DasarathHi,
We are getting this error while connecting remotely.
PFB output of listener status and services
apl11764a001:ORA37a > lsnrctl services LISTENER_ORA37
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 26-MAR-2012 12:18:06
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_ORA37)))
Services Summary...
Service "ORA37_ap" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:2 refused:0 state:ready
LOCAL SERVER
Service "ORA37_ap_XPT" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:2 refused:0 state:ready
LOCAL SERVER
Service "ORA37aXDB" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: apl11764a001, pid: 25970>
(ADDRESS=(PROTOCOL=tcp)(HOST=apl11764a001)(PORT=10862))
The command completed successfully
apl11764a001:ORA37a > lsnrctl status LISTENER_ORA37
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 26-MAR-2012 12:18:20
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_ORA37)))
STATUS of the LISTENER
Alias LISTENER_ORA37
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 26-MAR-2012 12:15:17
Uptime 0 days 0 hr. 3 min. 2 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /grid/product/crs/network/admin/listener.ora
Listener Log File /grid/product/crs/log/diag/tnslsnr/apl11764a001/listener_ora37/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER_ORA37)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.25.169.4)(PORT=62037)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.25.169.7)(PORT=62037)))
Services Summary...
Service "ORA37_ap" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Service "ORA37_ap_XPT" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Service "ORA37aXDB" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
The command completed successfully
Thank you.
Regards,
Dasarath -
Oracle 8i, Getting ORA-1501 error while creating new DB
Hi folks,
I am trying create a new database on an HP Machine (Details given below) but getting following error.
ORA-1501 - signalled during Create Database
LOGFILE 'G:\logfiles\logaf1.ora'
We actually have a custom application setup.exe to create new database.
Same setup when installed on a different low end machine works fine.
Before begining the setup in summary page it shows following information.
Block buffer count = -3 Bytes
Shared Pool Size = -41425 KBytes
Yes the values displayed are in negative.
Don't know if this is the reason for the ORA-1501 error.
Can anyone please suggest how to resolve this issue.
Machine configuration is as follows:
H/W details:
HP Server with RAID configuration
4, PIII CPU's
RAM: "4 GB"
S/W details
O.S:Windows 2000 Server with Service Pack-2
Oracle Version: 8i
Patch applied: Oracle8i Patch Set Version 8.1.7.3.0Try look to alert<SID>.log file for full error report (you could paste it here).
Also from alert log you could get real values for db_block_buffers and shared_pool_size parameters that used during instance startup. -
Get ORA-12560 error while accessing 11g database
Database version: 11.2.0.1.0
This is a development database running on CentOS. We had setup this database recently and everything has been fine. Today I noticed that when I connect to the database from remote, I get the following error -
ORA-12560: TNS:protocol adapter error
I'm able to get in to the database after logging in directly into the database server via putty. I have stopped & restarted the database, but with no help. I have checked the environment variables (ORACLE_HOME, ORACLE_SID) and they seem to be fine.
Can you please help on what might be the problem here? Is this something to do with some change in the OS firewall setting?
Edited by: museshad on Dec 20, 2012 12:44 PMlsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 20-DEC-2012 13:27:55
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 27-AUG-2012 16:50:42
Uptime 114 days 20 hr. 37 min. 13 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/xxxx/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xxxx)(PORT=1521)))
Services Summary...
Service "orcl.ENTERPRISENET.ORG" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.ENTERPRISENET.ORG" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
tnsnames.ora
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.ENTERPRISENET.ORG)
) -
Error while copying a page from one application to another application
Hi All
I am using Oracle Apex 4.0
I getting the error ORA-06502 Pl/Sql Numeric error character string buffer too small when i copying a page from one application to another application.
Thanks & Regards
Srikkanth.MI'm having the same issue. How did you solve this?
-
Error while copying Update rules from One Cube to other
I am getting the following error message while I was trying to copy an existing update rule from an existing InfoCube to a New InfoCube. Has anyone experienced this before? Please let me know how to resolve this.
Formula 3ZKQ....... (Object version M) could not be read.
The new and original cubes are custom cubes.
Thanks!Hi Vinod,
Check the update rules for the original cube. Are they active? It appears that they contain a formula...check this too.
Hope this helps...
Maybe you are looking for
-
Can multiple users authorize one computer on different windows login accounts? Several family members in our household have adobe IDs + library cards. When I connect my NOOK color to transfer an ebook within Adobe Digital Editions, it compares the em
-
IMac Flash install doesn't work
I have attempted to install Flash 14 on my iMac at least 10 times and without fail the install always fails and locks up my iMac every time the retrieving window comes up. My system has plenty of HD and memory so that can not be the issue and I have
-
Hi expert, I have a .doc file with some text inside. I want to put on the file other text from sap r/3. So, I think that I need a macro maked in visual basic, but I don't know it. Do you have some exemple to write this macro, to connect to sap from w
-
IPhone 4 sound issues (only out of one ear bud)
I've tried multiple headphones/ear buds and I can only hear music out of one side. This is obviously an iPhone 4 issues considering the headphones don't work on it but work on other stuff. Any ideas on how to get this fixed? I got this phone less tha
-
HT2506 "Find next" with a PDF document
I would like to use the "Find next string" of a PDF document with Preview. When i fill the search window, Preview does the search on the entire document, and shows the first occurence it has found. Thus, making me loose my current reading page. I ju