I am getting photshop file error while opening the project. I am using Adobe production premium CS6.
Hi,
I have try to open one comp file in After effects and i am getting an following error for linked PSD,
After that i have tried to open that PSD file in photoshop and i am getting an following error,
I am using Adobe production premium CS6. Could you please anyone faced this problem or provide some solution regarding this.
Thanks in advance :-)
I have the same suspicions as Szalam. This Photoshop file was probably made in the creative cloud version. You need to get one backsaved to CS6. The backsave shouldn't be a problem.
Similar Messages
-
Hi,
I have try to open one comp file in After effects and i am getting an following error for linked PSD,
After that i have tried to open that PSD file in photoshop and i am getting an following error,
I am using Adobe production premium CS6. Could you please anyone faced this problem or provide some solution regarding this.
Thanks in advance :-)The individual file has become corrupted somehow.
Happens often to users who work across a network, opening or saving a Photoshop image file to a server.
You're going to have to resort to your backup.
This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost. -
Getting a heap error while opening the BI Publisher Console login page
Hi,
I have installed BI Publisher 10.1.3.4.2 on OC4J on Windows 7 OS and getting the following error on opening the BI Publisher Login Console.
*2013-04-30 20:44:31.921 NOTIFICATION J2EE JSP-0008 Unable to dispatch JSP Page*
*: Exception:oracle.jsp.provider.JspCompileException: <H3>Errors compiling:C:\Ora*
Home_2\oc4j_bi\j2ee\home\application-deployments\xmlpserver\xmlpserver\persisten
ce\_pages\\_login.java</H3><pre>Could not create the Java virtual machine.
Error occurred during initialization of VM
Could not reserve enough space for object heap
*</pre>*
Thanks !set the JAVA_HOME environment variable to point to the same location where the JDK for OC4J standalone is located
-
Error while opening the projects in cProjects
Hi,
I am encountering a problem while opening the already created projects in cProjects. The error type is
The following error text was processed in the system DVR : Type conflict when calling a function module.
The error occurred on the application server and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_DPR_OBL_PROXY~LOAD_OBJECT_LINKS of program CL_DPR_OLR3_EASYDMS===========CP
Method: IF_CGPL_ASSIGNMENT_PERSISTENCY~FETCH of program CL_DPR_OBL_PERSISTENCY========CP
Method: LOAD of program CL_CGPL_ASSIGNMENTS===========CP
Method: LOAD of program CL_CGPL_PROJECTS==============CP
Method: LOAD of program CL_CGPL_ENTITIES==============CP
Method: LOAD_PROJECTS of program CL_DPR_APPL_OBJECT_MANAGER====CP
Method: LOAD_OBJECTS_OF_OBJECT_TYPE of program CL_DPR_BAPI_SERVICES==========CP
I request you all to help me out solve this issue if you know.
Regards
Nachimuthu RameshHi Vivek,
Thanks for responding to my question. I made changes as per your suggestion and now I am not getting the error message whatever I forwarded. But I am getting another error message 'You require authorization to display Project`. Pls help me out to solve this issue.
Thanking you
Regards,
N.Ramesh -
Facing the Error while opening the PDF Document generated by Adobe Forms
Hi,
I have created an Custom Adobe Form and calling this form through a Custom Program and generating the PDF and could able to download on to my desktop but when i am tyring to open it i m facing the below Error.
"There was an error opening this document. The file is damaged and could not be repaired" .
Please help me in this regard ASAP.
Please do find the attached error screen shot.
Thanks
SushilHi Naveen ,
Have done as per the link but still not opening
same error.
I have created a print program and from there want to generate pdf. But it is not working.
please find the below code : In this i am passing some tables to function module and output is formoutput of type fpformoutput.
Where do i need to do any changes if required.
data: lst_opparam type sfpoutputparams.
data: lst_docparam type sfpdocparams.
data: lfd_fname type funcname.
data: lrf_cx_root type ref to cx_root.
clear: lst_opparam, lst_docparam.
lst_opparam-getpdf = 'X'.
lst_opparam-preview = 'X'.
* lst_opparam-nodialog = 'X'.
call function 'FP_JOB_OPEN'
changing
ie_outputparams = lst_opparam
exceptions
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
others = 5
if sy-subrc <> 0.
* Implement suitable error handling here
endif.
try.
call function 'FP_FUNCTION_MODULE_NAME'
exporting
i_name = 'ZAFGLERC001'
importing
e_funcname = lfd_fname.
* E_INTERFACE_TYPE =
* EV_FUNCNAME_INBOUND =
catch cx_root into lrf_cx_root.
endtry.
lst_docparam-langu = 'EN'.
lst_docparam-country = 'IN'.
call function lfd_fname " '/1BCDWB/SM00000213'
exporting
/1bcdwb/docparams = lst_docparam
appl = 'EREC_ONBRD'
wa_ztbglerc049 = wa_ztbglerc049
wa_ztbglerc050 = wa_ztbglerc050
it_51 = it_51
wa_41 = wa_41
it_42 = it_42
wa_43 = wa_43
it_44 = it_44
it_45 = it_45
it_46 = it_46
it_47 = it_47
it_48 = it_48
importing
/1bcdwb/formoutput = formoutput
exceptions
usage_error = 1
system_error = 2
internal_error = 3
others = 4
if sy-subrc <> 0.
* Implement suitable error handling here
endif.
call function 'FP_JOB_CLOSE'
* IMPORTING
* E_RESULT =
exceptions
usage_error = 1
system_error = 2
internal_error = 3
others = 4
if sy-subrc <> 0.
* Implement suitable error handling here
endif. -
Hello All,
I am getting 'Out of memory' error while opening the file. I have tried several versions of Adobe 7.0,9.0,X1.
Also, it is creating issue to convert PDF into TIFF. Please provide the solution ASAP.I am using Adobe reader XI. When i open PDF it gives "OUT of memory" error after scrolling PDF gives another alert "Insufficient data for an image". after clicking both alerts it loads full data of PDF. It is not happening with all PDFs. couple of PDFs are facing this issue. Because of this error my software is not able to print these PDFS into TIFF. My OS in window7*64. I tried it on win2012R2 and XP. Same issue is generating there.
It has become critical issue for my production. -
Hi Techys,
can you give me the suugestions for below error in sharepoint 2010.
Error: "The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file.
User having the contribute permission.
as a admin i can open the document without any error.
user wants to open the document via online and VPN connection.
while the user seeing the document info the below error is indicationg .
Offline Copy, Work book is readonly Mode.
The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file which was upto date.
Many Thanks,
MadhuMake sure that the user is able to access workstream from the site collection through VPN. If the user is able to access already, try to download the file locally and see if the data is getting loaded and upload again.
--Cheers -
I have a WL 9.2.1 running on Sun solaris o/s .....it is failing to start thowing the following exception
<Mar 19, 2009 5:21:17 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.diagnostics.lifecycle.DiagnosticComponentLifecycleException: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was a
n error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:44)
at weblogic.diagnostics.lifecycle.DiagnosticFoundationService.start(DiagnosticFoundationService.java:107)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Caused by: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS0
00000.DAT"
at weblogic.store.io.file.Heap.open(Heap.java:166)
at weblogic.store.io.file.FileStoreIO.open(FileStoreIO.java:85)
at weblogic.store.internal.PersistentStoreImpl.open(PersistentStoreImpl.java:350)
at weblogic.store.PersistentStoreManager.createFileStore(PersistentStoreManager.java:202)
at weblogic.diagnostics.archive.DiagnosticStoreRepository.getStore(DiagnosticStoreRepository.java:61)
at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:42)
... 4 more
Caused by: java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
at weblogic.store.io.file.StoreDir.throwIOException(StoreDir.java:213)
at weblogic.store.io.file.StoreDir.open(StoreDir.java:103)
at weblogic.store.io.file.Heap.open(Heap.java:164)
... 9 more
Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11
at weblogic.store.io.file.direct.DirectIONative.open(Native Method)
at weblogic.store.io.file.direct.DirectFileChannel.<init>(DirectFileChannel.java:51)
at weblogic.store.io.file.direct.DirectIOManager.open(DirectIOManager.java:138)
at weblogic.store.io.file.StoreFile.openInternal(StoreFile.java:112)
at weblogic.store.io.file.StoreFile.open(StoreFile.java:142)
at weblogic.store.io.file.StoreDir.open(StoreDir.java:95)
... 10 more
i went ahead and checkd the file and the privs on the file they look correct -rw-r--r-- ...but when i just restart it ..it starts with no errors the next time......What could be the issue.....please help
Then only reason i could think of is the size of the file is 35MB now...is this the problem....if yes....is there a way to automaticaly rotate this file ....The root cause appears to be right in the stack trace:
Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11I think this indicates that either the file was either locked (because another instance of WebLogic had it opened), or that the file was unavailable for some reason. WebLogic locks files as a safety precaution to prevent misconfigured setups (multiple domains sharing the same directory and store name) from attempting to share the same file.
I don't think that this message necessarily means there is a file corruption.
As for rotation, the file store automatically adds new files as needed (I think its 1 file for every 2GB of data). The "diagnostics" file store is generated by the optional diagnostics feature, and I think that this feature has options for controlling the amount of stored data.
Tom -
Getting error while opening the workbook
Hi,
I am getting one error while opening the workbook.
Error: The Dependency "Join condition" is not found in EUL.
Basically, the workbook was working fine. But we droped some joins and recreated new joins. After this change, our worknbooks starts giving this error.
Please advice.
Where i can get the dependency information in EUL?
Thanks, rajeshThis has to be one of the most 'pain in the butt' errors you can get (well ... 0000 - normal successful completion is another).
Although I've seen this one for years, these days I'm finding many more examples that are happening to me with this (simply the environment I'm in) and in many cases, requires rebuilding the workbook again. For example, sometimes I put in the join that I think it's having a problem with, but the existing workbook simply won't run. Recreating the workbook exactly the same gets it to work properly. Maybe it's a 4.x thing (version I'm on these days) ... but just a warning that you may well have to rebuild.
Russ -
Error while opening the backup information fom Maxdb
Hello All,
I am getting the below error while opening the backup information from Maxdb.
Backup history file /sapdb/data/wrk/<sid>/dbm.knl corrected in line <xxxx> ; 2012-02-21 07:30:25 can not be convert in to a signed 32 bit integer value
The full line is as below from the dbm.knl file:
4F4337C5014C|LOG_000030571|SAVE WARM|2012-02-21 07:16:03|2012-02-21 07:20:49|2012-02-21 07:20:53|2012-02-21 07:21:04|2605155691|2605244F433A01014E|LOG_000030573|SAVE WARM|2012-02-21 07:26:09|2012-02-21 07:30:24|2012-02-21 07:30:25|2012-02-21 07:30:41|2605326357|2605411689| |<SID>_LOG | 85344| 0| 0| |
I am able to open and check this line in the file dbm.knl ; But, i am not getting why this error is occurring while opening the backup information from Maxdb. I am able to view the backup logs through LC10.
Currently i am getting this error and when i am click on cancel (or ok) getting the blank page. I am not able to view the backup logs form Maxdb.
Please give me some hint to resolve this.
Regards,
Nagendra.Hi,
Use below procedure
1. Go to /sapdb/SRD/data/wrk
2. cp -rp dbm_knl dbm_knl_OLD
3. vi +<Line in which the corruption occured> dbm.knl
see there must be a corruption in the given line and it will specified with a green color
delete that part and make the format as per the above line
4. save the file
5. execute the procedure again from Database studio or Database Manager
(Note: Make sure that you have taken the backup first of dbm.knl file Because any extra entry may cause another corruption)
(FYI : This file is only log file of successful backups and returns the return-code)
Regards,
Paramvirsinh Jetawat
SAP BASIS Consultant -
Error while opening the receipt entry form in AR module.
Error while opening the receipt entry form in AR module. We have created one new responsibility of Receivables for new operating unit . When we open the corresponding
forms , we are getting the error message as :
NO_DATA_FOUND
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-20002.
Kindly help in resolving.
We have ERP version of 11.5.10.2Please also see the following docs.
Transactions Workbench Error: Listing of ORA Errors [ID 1336495.1]
FRM-40735 ERROR OPENING LIFE EVENT REASONS FORM BENLEVRS [ID 1517593.1]
APP-AR-96996: The Defined Sales Representatives Have Incorrect Id'S [ID 437107.1]
ARXSUDRC Receipt Classes Errors With APP-AR-96994: Please Define Sales Representatives [ID 357454.1]
Thanks,
Hussein -
Error while opening the BO report
Dear Experts,
Am getting following error while opening the reports through Xcelsius.You cannot amke a connection to the BusinessObjects web service ( LO 02010)
Failed to get the document information. (LO 26315)
Some objects are no longer available in the universe .See your BO admin ( Error : WIS 00001)
Actually am the BO administrator , Yesterday I 've changed license key for Xcelsius and BO Enterprise...Hi ,
You can view the following URl ,which may be helpful for you.
Live office excel error
-Thanks, -
Error while opening the database.--urgent---pls help...
Hi,
Got the below error while opening the database.
Database version is :10.1.0.4.0
database is in noarchive log mode.
the database is coming in to no-mount state and mount state quite easily but not able to open the database.
Got the below error while opening the database.
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
Mon Sep 29 15:32:39 2008
Errors in file /xxx/udump/aaa_ora_18737.trc:
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
Mon Sep 29 15:32:41 2008
DEBUG: Replaying xcb 0xc0000000350c1c18, pmd 0xc0000000353b21f0 for failed op 8
Doing block recovery for file 2 block 9483
No block recovery was needed.
on Sep 29 15:34:01 2008
Errors in file /xxx/udump/aaa/bdump/aaa_pmon_18723.trc:
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
Mon Sep 29 15:34:04 2008
Errors in file /xxx/udump/aaa/bdump/aaa_pmon_18723.trc:
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
PMON: terminating instance due to error 472
Instance terminated by PMON, pid = 18723
Please help me....................Hi..
This ORA-600 refers to a mismatch has been detected between Redo records and rollback (Undo) records.Is better to lock a call with oracle support.Secondly, apply latest patch on the DB.
I had expereiced the same error, but my DB was in open mode, so i created a new undo tablespace and changed the undo_tablespace parameter and it worked.
Anand -
Error Message "Error while Opening the Document"
Hi Friends,
I have a problem while opening the SFP transaction and Clicking on the Layout Tab the SAP System is giving an error message saying "Error while Opening the Document".
I have tried testing on several systems like IDES, ERP, Retail systems. But it is giving me same error. Is this the problem with ADOBE LIVECYCLE DESIGNER?
And when I click on the Performance Assistant it has given me some information:
Error while opening document
Message no. SOFFICEINTEGRATION143
Diagnosis
An error occurred in the desktop application while opening a document.
Friends can you help me in solving this problem.
Thanking yoy in Advance
Pradeep GoliPradeep,
Maybe Live Cycle Designer has not been uninstalled correctly from your system. So goto the following lcaotions and remove the Designer folder if you find them:-
C:\Program Files\Adobe
C:\Documents and Settings\<your-username>\Application Data\Adobe\
Alternatively try installing Live Cycle Designer on some other machine in your network and see if you encounter the same error.
Similar thread for reference : Error - Adobe Live Cycle designer
Chintan -
Error while opening the application help
Hello,
We are trying to open the application help from the R/3. It is giving
us the follwoing error.
This is linked to the knowledge warehouse server 6.20.
Error:
SAP Internet Knowledge Server
The IKS cannot display the page you asked for.
Please contact the administrator if this problem persists.
Additional infomation:
RFC Error: System exception raised, connection closed (SIW_IKS_VAR_GET)
RfcRc: <3>, ErrorInfo:
The confuguration looks fine as per the note # 381266.
The help is working fine previously.
Thanks in advance.
Best regards,
Madhav.Hi Arun,
Error due to incorrect installation of life cycle designer.
check the below links for solution.. ( same issue ).
Error Message "Error while Opening the Document"
Error - Adobe Live Cycle designer
Regards
Srinivas
Maybe you are looking for
-
View requests result should open in new browser window
Hello ! I am new in OAF. And I am tired of looking forsolution... I have a requrement. In the "Request Monitor" page, requests result should open in a new window. It means that each user's click on "View request result" should open in a new browser w
-
Help for a watered MacBook Pro?
Hey everyone! So, last week, I spilled a pretty full glass of water on my 13-inch non-retina display MacBook pro. The screen stayed on for a little while on the word processing I was doing before it fizzled out. I took it to the Genius Bar, where the
-
Ipad2: Imovie was deleted, re-install doesn't show original created movies
My daughter had created a number of movies in iMovie on the iPad. Our first one was dropped and I took it to the Apple store and they replaced it (Thank You, Apple store Pioneer Square!!!!) When I plugged the new one in, it re-installed everything,
-
I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??
-
Java exception on "cache document" post to CRM from UCCX
We recently implemented a CRM which supports a method of 'call pop', where information is POST'ed from our UCCX application to an inbound point. It works perfectly. The problem we're seeing is that if that inbound point is unavailable, our applicatio