I am getting redirects on iPad air and iPad 2 whether using wifi or Cell services.

iPad Air
running 8.2
Model mfoo3ll/a
I did a search today for a local doctors website and phone number using google.
When I clicked on the site I was first directed to a "app" to buy ****.
I closed the window and opened a new window and typed in the URL directly and then got redirected to to other **** sites.
When I tried on the desktop computer, everything was fine and got to the website normally.
I then cleared all history, cookies and web data. Still the same redirect result going to the same website.
I did the above and shut down and restarted. Still the same thing.
I read about possible infected wireless routers where one of the tips was going to a different wireless network and see if it cleared up the issue. So I turned off the wifi and turned one the ATT cell service. Still same result.
I am looking for suggestion on what to do next.
Respectfully
AD

stedman1
I did see that article.
Did you see where I said I used the Cell Service not wifi? totally bypassed my wife router and its still doing weird sh_t
I am on ATT cell service and when I open Safari, instead of a blank window, it defaults to the BING website. This is totally bypassing the router and using cell service.
I did a reset as per jazcan, installed 8.3 and still No Joy.

Similar Messages

My iPad is stuck with a small blue screen saying iCloud Backup, this iPad hasn't been backed up in 4 weeks.Backups blah blah- Click OK. I can't get it off the screen and I can't use the iPad because of it. Can anyone out there help?

my iPad is stuck with a small blue screen saying iCloud Backup, this iPad hasn't been backed up in 4 weeks.Backups blah blah… Click OK. I can't get it off the screen and I can't use the iPad because of it. Can anyone out there help?

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

HT1752 I have an IMac OSX and a 2013 MacBook air and I want to use the screen on my IMac. I have connected the cable but I can't get the IMac screen to connect to my MacBook

I have an IMac OSX and a 2013 MacBook Air and I want to use the screen on my IMac. I have purchased the cable and connected, but the IMac will not connect to my MacBook. I have tried the Command/F2 but it does not work. Any help would be appreciated.

Target Display Mode 2009 & 2010 iMacs
Target Display Mode 2011 & Later iMacs
iMac- How to use your iMac as a Target Display Mode display
Target Display Mode- Frequently Asked Questions (FAQ)

Trying to setup my iPad - get message "This iPad cannot be used because Apple Mobile Device service is not started." What does this mean? I am unable to get any connection at all..

I'm trying to setup my new iPad2 - get message "This iPad cannot be used because Apple Mobile Device service is not started". What does this mean? I can't get anything up on my iPad. Frustrated!

Assuming that you are on a PC then there are intructions here for starting it http://support.apple.com/kb/TS1567 , and for a Mac http://support.apple.com/kb/HT1747

I updated to yosemite and now if someone is using imessage and sends a text message to my phone it doesn't show up on my phone but does on my computer. I don't want messages on my computer! How do I get this to go away and work like it used to?

I updated to yosemite and now if someone is using imessage and sends a text message to my phone it doesn't show up on my phone but does on my computer. I don't want messages on my computer! How do I get this to go away and work like it used to?

Follow the instructions under the heading "How to unlink a phone number" on this page.

How do I get rid of the red and white compass rose used with the rotation tool...from the document? I am using a iMac and Macbook Pro OS Mavericks. CS6 no CC

how do I get rid of the red and white compass rose used with the rotation tool...from the document? I am using a iMac and Macbook Pro OS Mavericks. CS6 no CC?
any help appreciated...thank you! V

I don’t think you can.

Every time I close my Macbook Air and then go to use it again. My wifi is not connected, I have to go to the network diagnostics and basically find my network and reconnect every time. Is there anything I can do to fix this?

Every time I close my Macbook Air and then go to use it again. My wifi is not connected, I have to go to the network diagnostics and basically find my network and reconnect every time. Is there anything I can do to fix this?

worksafe's link with the KeyChain fix is good.
This usually happens when KeyChain has two entries for the same WiFi network.
If repair did not work you can follow the manual steps:
Disconnect WiFi
Open KeyChain from Applications / Utilities and find your WiFi network entry(ies) and delete all of them.
Connect to your WiFi again.

HT1695 I have a iPad and am trying to use wifi. I am using a hotspot that requires a 6 character password. The iPad wants 8 characters.

I have a iPad 2 and am trying to use wifi for the first time. I am using a hotspot that requires a 6 character password. The iPad wants 8 characters.

First make sure you are connecting to the right network. The next thing to do would be to change the password for the WiFi network to 8 characters.

I downloaded the OS X on my air and I can't use my keyboard and it won't let me restart my computer because it says that the application assistant canceled the shut down, I don't know what to do

I downloaded the OS X on my air and I can't use my keyboard and it won't let me restart my computer because it says that the application assistant canceled the shut down, I don't know what to do

When all else fails (it sounds like it has) hold the power button for about 10 seconds. This shuts down the computer. Then tap it to restart. Since it sounds like the OS upgrade began but then failed to perform a restart you may find that the Install Mavericks file is still in the Applications folder and you can try again. Or you might find that you have to redownload. I don't think the installation is going to proceed as if the computer had successfully restarted but I could be wrong (and in this case gladly so for your sake.)

I get a message stating that this iphone cannot be used because Apple Mobile Service is not started

I get a message stating that this iphone cannot be used because Apple Mobile Service is not started

Windows XP
Close iTunes and disconnect the iPhone, iPad, or iPod touch.
Choose Start > Control Panel.
Inside the Control Panel, open Administrative Tools.
Open Services.
Select Apple Mobile Device and click Stop the service as shown below:
After the service has stopped, click Start the service.
After the Apple Mobile Device service has started again, open iTunes and connect the device.
Windows Vista or Windows 7
Close iTunes and disconnect the iPhone, iPad, or iPod touch.
Click the Windows Start button .
In the Start Search field type Services.
In the Programs section of the search results, Click "Services".
Select Apple Mobile Device and click Stop the service as shown below:
After the service has stopped, click Start the service.
After the Apple Mobile Device service has started again, open iTunes and connect the device.

Suddenly my ethernet and firewall are no longer connected. router is good...and can connect only using wifi...suggestions?

suddenly my ethernet and firewall are no longer connected. router is good...and can connect only using wifi...suggestions?

SOLUTION!
I've been suffering from this problem for a few months. I tried everything suggested by everyone, and then, today, I had a mad idea.
I used to work in a room in the house that's about 12 metres away from the router. It's on the next storey up and horizontally about 8 metres away. The problem started when I began to work in the same room as the router.
Today I became so frustrated that for some reason I walked into a room about 8 metres away on the same level - Guess what? I connected with no problem at all. Feeling full of joy I walked back to the room where the router is located - Dropped internet connection within a few minutes! Walked back to the the room that's 8 metres away and, hey presto! I have a connection. I now realise that the problem was that I moved too close to the router.
I can think of no logical explanation for my experience, but empirically it seems to work. Does anyone have the faintest idea of why this should be the case? In the absence of an answer I think I may have to start believing in fairies at the bottom of the garden - I'm just off to set a meal for them.
By the way, I don't know if it has any significance, but the router is a BT Infinity router that has replaced the incredibly unreliable Virgin Media cable connection

Hi i have an ipad 1 32gb and now i cant use wifi

Hi i have an ipad 1 32gb and i just updated it and now i cant use my wifi and i dont have a carrier and i dont want a carrier so can someone plz tell me *** is up with this i need the wifi i have restored ad reset eveything and i cant figure it out

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How to get multiple header lines dynamically and also data hierarchically using ALV

Hi experts,
My requirement is shown below.. I neet to compare prices of service RFQs. So i design as below..
I want to get RFQ number ,Vendor code and vendor name in ALV header and also other headings which static. I think dynamic table is the best way to load RFQ numbers to header.. But problem is i'm unable to load two lines dynamically using ALV.
CALL METHOD cl_alv_table_create=>create_dynamic_table
     EXPORTING
       i_style_table             = 'X'
       it_fieldcatalog           = gt_dyn_fcat
     IMPORTING
       ep_table                  = gt_dyn_table
     EXCEPTIONS
       generate_subpool_dir_full = 1
       OTHERS                    = 2.
I use this function and pass RFQ no and vendor code in two rows but it output gt_dyn_table in same row.. How to print them as given image???
Then in data I want to get service items and according to the external service number divide them to groups and get sub totals and also finally total of all sub categories to compare each RFQs price to compare.. There i think ALV hierarch can use. but not sure I can use with dynamic table(in header use it).
What is thee best way to get the output in my image..??
Thanks..
Pavi

Hi experts,
My requirement is shown below.. I neet to compare prices of service RFQs. So i design as below..
I want to get RFQ number ,Vendor code and vendor name in ALV header and also other headings which static. I think dynamic table is the best way to load RFQ numbers to header.. But problem is i'm unable to load two lines dynamically using ALV.
CALL METHOD cl_alv_table_create=>create_dynamic_table
     EXPORTING
       i_style_table             = 'X'
       it_fieldcatalog           = gt_dyn_fcat
     IMPORTING
       ep_table                  = gt_dyn_table
     EXCEPTIONS
       generate_subpool_dir_full = 1
       OTHERS                    = 2.
I use this function and pass RFQ no and vendor code in two rows but it output gt_dyn_table in same row.. How to print them as given image???
Then in data I want to get service items and according to the external service number divide them to groups and get sub totals and also finally total of all sub categories to compare each RFQs price to compare.. There i think ALV hierarch can use. but not sure I can use with dynamic table(in header use it).
What is thee best way to get the output in my image..??
Thanks..
Pavi

Set up new MacBook Air and can't connect to wifi

Setting up new MacBook Air and it won't connect to my wifi. I'm still in the setup mode and don't want to skip the apple id section and install at a later date. HELP, I can't seem to go back to the network page either to change if it was wrong.

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Best.

My laptop always gets a blue dump screen and I want to use HP recovery

I want to use the recovery manager. But I'm not sure on which should I use Microsoft System Restore or System Restore? What's the difference? Please help ASAP

Hi jarlihdnesJude,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you would like to know the difference between a Microsoft restore and an HP recovery. This document will explain the differences for you. Using Microsoft System Restore (Windows 8)
If you are running Windows 8 there is another option for you to consider. Refresh Your PC to Resolve Problems (Windows 8).
If you have any more questions or concerns, please feel free to reply.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

I am getting redirects on iPad air and iPad 2 whether using wifi or Cell services.

Similar Messages

Maybe you are looking for