I am getting The disk you inserted was not readable by this computer

when I insert a store bought music CD. This does not happen with DVD's or
other discs that I have burned. I have an the original PIONEER DVD-RW DVR-104 in my computer. Just seems the drive will just not recognize any store
bought music cd's but will recognize DVD's and my other cd's that I have burned. I have already ordered a new drive pioneer 111-D and I am hoping
this will solve my problem. I would like to know whether this might be a software conflict or if it really is a hardware problem.

Go Figure-I used the combo mac os 4.8 update. Originally I updated to mac os 4.8 using the stand alone updater and now my dvd now recognizes music
CD's. I will from now on use only the combo updater and not the stand alone
updater.

Similar Messages

  • Audio CDs get "The disk you inserted was not readable by this computer"

    Hi All,
    This a near-duplicate of a message originally posted to the Snow Leopard forums.
    A couple months ago I upgraded to 10.6.4 from Leopard and configured a Boot Camp partition running Windows 7. Yesterday I discovered that whenever I put any audio CD, retail or burned, into the Macbook's drive I now get this message - "The disk you inserted was not readable by this computer" - with the options to ignore or eject. Disk Utility displays no unusual information, but a check of the system log on Console turned up this:
    Sep 8 11:05:21 Hard-Drive diskarbitrationd17: unable to probe /dev/disk1 (status code 0x00000047).
    Has anyone encountered this problem before? I suspect it's related to Boot Camp but not to the initial installation - CD reading worked fine right after the install. Note that this only affects CDs - Burned and retail DVDS read without any trouble.
    Michael
    P.S. The CDs tested include one just out of the shrink wrap, so please, no "have you checked your CDs they may be scratched" replies.

    Thanks, but no thanks. This is a software/hardware (driver?) issue, not a hardware issue alone. I kept a bootable backup copy of my 10.5.8 installation on an external drive, and a quick restart into that yields a desktop where CDs still load perfectly. I'm looking for power users with specific experience with this particular error and insights into what is causing it in 10.6.4.
    Message was edited by: mlach, who is tired from simultaneously troubleshooting this and an X11 error and has forgotten how to type.

  • Getting "The disk you inserted was not readable by this computer" when connecting by USB

    Any suggestions?

    I haven't experienced that, but I recommend you start with the usual maintenance procedures:
    First, startup using Safe Boot, which does some repairs while starting. Just restart normally after that finishes. (And try adding a printer after that):
    OS X: What is Safe Boot, Safe Mode?
    If that hasn't helped, try Resetting the Printing System:
    OS X Mavericks: Reset the printing system
    Then try adding the printer.

  • Why do i get the "the disk you inserted was not readable by this computer" error when I don't even have a disk inserted?

    Why do I keep getting "the disk you inserted was not readable by this computer" caution message when I don't have a disk inserted???

    Unfortunately, I saw this error for the first time this morning. It's on my wife's iMac running Lion, and it appeared when the machine locked up on a Software Update screen prompting her to run an update (I'm assuming this was the recent Security Update).
    After numerous failed attempts to force-quit or otherwise safely restart, she hit the power button, and when the machine came back up it failed to recognize the startup disk. I've since successfully restarted from several different (external) startup disks without incident, but each time I attempt to fix the internal drive via Disk Utility the disk shows only as "Media" and all the usual options to Repair or Verify the Disk are greyed out, leaving only the Erase Disk option.
    Are we totally hosed?

  • The disk you inserted was not readable by this computer.HELP

    Initialize... Ignore. Eject ...
    do not disconnect displayed on my ipod nano.
    **** fustrating. I plugged in my ipod nano to my pb g4 and switched on the pbg4 and then it went mental. Itunes is stll present but when I plug in the ipod nano using the USB I'm getting
    ' The disk you inserted was not readable by this computer.'
    All I'm getting is do not disconnect on the ipod. I've tried everything including a whole uninstall reboot , master reset etc etc. CAN YOU HELP???
    FUSTRATED .. many thanks !!!~

    This often happens when OS X thinks that the iPod hard drive is corrupted. You should click initialize, then when that process has finished, restore using the iPod updater.
    Alternatively, you could do a restore using disk utility, the restore via the updater.

  • Keep getting a "the disk you inserted was not readable by this computer" when I insert my printer cord into either USB port.  Recently installed a portable hard drive for back up purposes.  Related?

    Keep getting a "the disk you inserted was not readable by this computer" when I insert my printer cord into either USB port.  Recently installed a portable hard drive for back up purposes.  Related?

    Does your printer have a slot for an SD card?  Is there are card in the slot?  If so, the computer is trying to mount that card as an external device.  It might be corrupted so that it can't be read.

  • F this error message  "The disk you inserted was not readable by this computer" with 2 radio buttons "Ignore" or "reject"  It comes up every time I start my new printer. How do I get rid of it?

    When installing my new HP printer I received the following error message when I inserted  the software install disk: "The disk you inserted was not readable by this computer" with 2 radio buttons "Ignore" or "reject"  I was able to eject the disk but the message remains. Now every time I start up the printer this error message pops up on my computer.  I have since used the disk drive successfully for music CD's etc.  How can I get rid of this message?

    PRAM RESET
    Zap the PRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • My Sandisk cruzer thumb drive 4.0GB (which is very old, roughly 10 years and I'm not sure about the model) reads "The disk you inserted was not readable by this computer" when inserted in my Macbook pro 2010. How do I get it to work?

    My Macbook Pro 2010 with the latest OS does not open a particular Sandisk Cruzer 4.0GB (which is an old model, about 10 years) thumbdrive with the message "The disk you inserted was not readable by this computer". Will I be able to read it on my macbook?

    Is it readable in a Windows computer?  If not then you can try Disk Utility to repair the drive-- although that may be dangerous too.
    I haven't had this problem so I out of safe ideas.  There are ustilies out there.   I used the seach term "repair flash drive Mac OS X" to locate some of these.
    If the data is essential there are pay-for services to recover data looked the price was in the range $50 - $1000
    All the best.

  • WD external Hard Drive comes up with "The disk you inserted was not readable by this computer."

    So here lies the problem, when connecting my WD external HD to my MBP, I get the message The disk you inserted was not readable by this computer. and a further three options of initialize, ignore and eject. I have always hit ignore.
    When checking my files, the HD is not available in my finder window.
    I've gone into Disk Utilities. It is there to be highlighted. And I go to repair the disk, but each time the Repair button is greyed out.
    I've tried to use my data recovery software (rescue pro deluxe) but because the drive isn't showing up in that program, it isn't working.
    Are there any other options out there to get the files from that HD (I've just gotten back from 2 months of travel with a bunch of photos on that HD - so would like to get them back). Even if that means putting them onto a spare external HD.

    Thanks for your quick response. I had a look at your discussion... I tried it on a Windows machine and I thought that was compatible with ExFAT?
    Therefore I need to attempt to use my external hard drive with a machine that boasts OS X 10.6.5 or above and then it should work?
    Thanks

  • External HDD: "The disk you inserted was not readable by this computer"

    Hi,
    I have an external drive with important data on it (there is a backup, but there is also some non-backuped data as well...). I cannot access the external drive because I receive a "The disk you inserted was not readable by this computer" message connecting it. I was wondering, if you have some advice on how to get my data back?
    I have a WD Elements 2 TB (about 2 months old), I am using is with an iMac, latest Snow Leopard. The drive used to work all fine. Now, I receive a "The disk you inserted was not readable by this computer" every time I connect it. Same thing happens if connected to my MacBook Pro.
    What happened?: I was copying files to the external drive. I the middle of it, I received a message complaining I that assumedly ejected the drive by pulling the USB cable out instead of properly ejecting it software-side (I did not do this). The drive symbol was gone. Now, I plug the drive out an reconnected it. The drive symbol showed up again. I continued copying files on the drive, but after some 30 seconds, I received the same error message again. One more time, I disconnected and reconnected the drive - this time to another USB port. The drive showed up, but I was not able to copy files on it (I am using muCommander, it just kept showing 0kb progress). I restarted the Mac. Since then I am getting the "The disk you inserted was not readable by this computer." The drive symbol does not show up anymore.
    I was googling the problem: in one forum there was a suggestion to click "initialize drive" and than to "repair" in DiscUtility. I clicked initialize drive and the drive is shown in DiscUtility, but "repair" and "verify" are greyed out. I read more posts on it, one posts suggested NOT to click initialize because that means format in Mac OS language (btw: ***, why is it not called format).
    That is the situation at the moment. What is the best - if there is - way to get my data back? DiscWarrior?
    I very much appreciate your advice!
    Daniel

    "Initializing" a drive has been normal computer terminology for decades.  "Formatting" generally referred to the high-level preparation also called "erasing."  None of this is "Mac OS language."
    Disk Warrior will not likely fix the problem you have.  DW can repair a damaged directory, but your error suggests an even worse problem of directory corruption.  I suggest you try using DW if you have it.  Visit the Alsoft site to determine the limitations and usage of the version you have.  It may not be able to boot your computer depending upon what version of DW you have and how new your computer is.
    If you have no success with DW then see the following:
    Basics of File Recovery
    Files in Trash
    If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location.  OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
    If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone.  Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • External Drive: The Disk You Inserted Was Not Readable By This Computer

    I have a 2TB Western Digital external drive that I've been using for a year or two as my backup for my Aperture libraries.  Been working fine until now, I get the "The disk you inserted was not readable by this computer."  Clicking "Initialize" takes me to disk utility with no usable options.  Whatdoido?!
    Did my laptop just become illiterate?

    I had this exact issue with my external harddrive, I scrolled forums and did what they said and nothing, then I just happened to be in the app store and thought I would search for data recovery, a few came up and only a couple had ratings so I looked at Data Rescue 3, its £40 so I went ot their website for the trial version, downloaded and installed that, tried it and rescued a random file (limits obvioulsy on the trial verison) and it worked so paid the £40 and am currently saving all my files to another external harddrive.
    Try out the trial first and if it works on one file i reccomend the the full program!
    Good Luck!

  • "The disk you inserted was not readable by this computer" 10.9.3 - WD-500GB WD5000AADS

    Mac Book Pro
    MAC OS Extended(Journaled)
    Capacity:97GB
    Version-10.9.3
    Hello Mac Fam,
    I recently purchased a HD-Enclosure (Insignia 3.0 desktop hard disk enclosure),since my WD 500Gig Hard Drive broke(power cable broke). Before the Hard Drive broke, it worked perfectly on my Mac Book Pro (Read/Write). I was extremely excited when i purchased the HD Enclosure since i thought that it would work perfectly, like it did before. However, i keep getting the following message ""The disk you inserted was not readable by this computer". I haven't tried anything, since upon reading various post regarding this problem, i get bits of information but never the complete solution.I have many pictures/files/etc. that i refuse to lose. I know this can be fixed, just need a bit of help to get it done. Any feedback would be greatly appreciated. Merry Christmas to you all, and hopefully someone can help me out.
    -guS

    OK. for anyone who has had or is having this problem, I think I've found a solution, or a least one that worked for me:
    Select your start-up drive, do a Get info (Command-I)
    At the bottom where it says sharing and permissions, I had two items: System and Everyone. Both were set to Read. I unlocked using administrator password. I then reset the two items above to Read and Write. I then clicked on the little plus sign which brought up a dialog window. In that I selected Administrator and then set that to Read and Write.
    My audio CD's now mount as they always have for years! Very odd, and honestly I could not explain why this worked, but I figured it out myself, something that I now feel I owe my self a fine Belgian beer.
    Good luck

  • "The disk you inserted was not readable by this computer" error message

    Hello. I've had my iMac for a little over three months and I've encountered a strange problem. I play Warcraft III, and whenever I insert the disk into the drive, I get an error message saying "The disk you inserted was not readable by this computer" and it gives me the options to ignore or eject. I've gotten the same message with Starcraft as well. I also tried putting in the iPod Nano install disk with the same result. CD-Rs and Audio cds work smoothly though. I called Apple technical support and they told me to call 1-800-MY-APPLE to schedule an appointment with my local branch to bring it in. I just wanted to make sure no one on these forums can help me. All help is greatly appreciated. Thank you very much.
    iMac (Early 2006)   Mac OS X (10.4.6)  

    Steve, the original poster made clear he was on a core duo iMAC which ONLY runs OS X (discounting non Apple OSes of course!)
    Therefore there is no extension manager. But I guess he would thank you for trying to help anyway.

  • The disk you inserted was not readable By this computer (Error)

    Hi
    everytime in the last couple of days im inserting a bank Cd to my cd/dvd drive (MATSHITADVD-R UJ-85J) im getting the same error
    "the disk you inserted was not readable By this computer"
    it only happen when the disk is blank. all other disks work ok.
    haven't install any new software or hardware, but had some HDD problems.
    any suggestion what should i do?
    my system profile is:
    version 10.5.7
    Hardware Overview:
    Model Name: iMac
    Model Identifier: iMac7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 2 GB
    Bus Speed: 800 MHz
    Boot ROM Version: IM71.007A.B03
    SMC Version (system): 1.20f4
    Serial Number (system): W873226** <Edited by Host>

    first time posting so not sure this ended up in correct area...
    I had same issue except only repairing the permissions didn't solve anything for me. *_If you recently upgraded your iTunes to 8.2_* check your permissions for errors, fix the errors, then restart computer and if that doesn't fix it, then try one of the 3 solutions below as there is a *known burn issue with the recent 8.2 update!*
    My permission errors - permissions differ on ./Applications/iTunes.app/contents... etc, should be -rw-rw-r--, they are -rwxrwxr-x
    I called Apple Care and we figured out 3 work arounds til a fix is released.
    Solutions 1,2 are recommended by Apple Care. I used solutions 1 (easy) and then 3 (complicated).
    Option 3 is a pain and takes A LOT of time and HD space or external HD if you have tons of music, podcasts, audiobooks, etc, loaded into your iTunes.
    _*3 possible solutions:*_
    1. Use the Finder window already built in the mac (to burn onto blank cds) -
    Open Finder Window, go to File in the Menu Bar at top of computer, create a new Burn Folder, drag items to the folder and click on the burn icon inside the folder, insert blank disk when asked, add name, select burn speed, burn the cd.
    2. Use the app Burn 2.3U -
    Found at Apple.com in download section works like a Finder Window and converts audo files to MP3 automatically. (You can set up iTunes to do this as well)
    3. Install an older version of iTunes 8.0.2 (couldn't find 8.1 thru 8.1.051) -
    I found 8.0.2 at Apple.com, this process is complicated and you will need lots of HD space or external HD to do this because you'll want to back up your music library and you will need to delete version 8.2 BEFORE trying to install an older version. Otherwise stick with option 1 or 2 til a fix is released by Apple.
    I ruined 8 blank cd's that actually burned but then I got the error message "the disk you inserted was not readable by this computer (Error)" at end of burn cycle and sometimes early disk ejections. _*I had no problems before the iTunes update in the past 5 days.*_ Still can't read/play the 8 disks but the problem went away!
    I had burned 20 cds no problem last week with same media disks that were producing errors after doing the iTunes update, now after chosing to downgrade my iTunes I'm back to burning with no issues!
    8.2 has 2 versions 32bit or 64bit, one of them may be PC/Windows version only but not sure which one I upgraded to or if that's even a factor with the permission errors I had.
    Best wishes

  • The disk you inserted was not readable by this computer - Finalized video DVD

    Suddenly I have not been able to watch video DVD’s on my MacPro OS x 10.5.8 that I have recorded with my Panasonic DVR.  I am also not able to read some data DVDs.  I am able to read other data DVD’s and all the data CD’s I’ve tried.  My PowerBook G4 is able read and play all these disks including the video DVD’s recorded on my DVR.
    I use my DVR to record TV programs off the air and to transfer home movies from my camcorder to DVD.  I finalize the disk and then watch it later on my MacPro.  I also use the DVD as a way to get home movies into iMovie for editing.
    I’ve had no problems in the 3 years I’ve been doing this.  Now when I insert a video DVD recorded with my DVR I get the following message:
    “The disk you inserted was not readable by this computer”
    Before this happened I watched a commercially produced DVD movie on my MacPro for the first time.  I suspect this DVD changed something in my MacPro’s DVD player.
    Is there a way to get my MacPro back to the state where it will read a DVD video I have recorded on my DVR?  Is there a way to use Time Machine to revert back in time before the problem started?  I am using an external drive with Time Machine for backup.
    Thanks.  Bob

    I have a panasonic dvr pretty similar to yours, I hope (DMR EH55) and to transfer stuff to dvd, you have to change the drive over to dvd, put in the blank dvd, format it, then tick off the stuff you want copied, then choose high speed copy, then you have to wait, until the stuff gets copied, and the whole process finishes- dvd in the drive says formalized, this thing is necessary so that this dvd will play in dvd players, then you have to wait until it says it's done. if the dvd is not formalized, just copied and removed , then it will probably not play in dvd players. I've done what was mentioned before, and no problems, also check the brand of media you are using, and use a brush type dvd drive cleaner on your MacPro's DVD drive
    hopefully that helps

Maybe you are looking for