I am getting this error message, and don't know how to resolve it: 3D features require a minimum of

I just became a Photoshop CCmember today. I don't know what to do about this error message: 3D features require a minimum of 512MB of vRAM. Photoshop has detected less than that on your system. Updating the driver of your graphics card may resolve the issue.

What are your hardware specs? How much vRAM do you have? (Note: System RAM and Video RAM are two different things)

Similar Messages

I get the following error message and don't know how to correct it: Sync encountered an error while connecting: Unknown error, Please try again.

I get the following error message and don't know how to correct it: Sync encountered an error while connecting: Unknown error, Please try again.

There have been problems reported with Sync.
They are working on it, so please try again later when those problems are fixed.
*https://services.mozilla.com/status/
*http://twitter.com/#!/mozservices

When trying to stream video I am getting this error message "Firefox doesn't know how to open this address, because the protocol (st) isn't associated with any program." How do I fix this?

<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/782039]</blockquote><br>
When trying to stream video I am getting this error message "Firefox doesn't know how to open this address, because the protocol (st) isn't associated with any program." How do I fix this?

Protocol error usually indicates that the very leftmost part of the URL is not recognized.
So http://, ftp://, rtsp://, usually work.
ableton:// would need to be added by some software somewhere...
Can you get instructions from the vendor? Does these posts seem relevant:
[http://forum.ableton.com/viewtopic.php?f=32&t=112368 Ableton Forum • View topic - [dds] Bug with Fireforx browser and downloading project?]
[http://forum.ableton.com/viewtopic.php?f=32&t=109918 Ableton Forum • View topic - [gck] Problem downloading shared sets from Ableton server.].

I try to email or IM a link or comment on a website page and I get this error message: Firefox doesn't know how to open this address, because the protocol (ymsgr) isn't associated with any program.

Firefox doesn't know how to open this address, because the protocol (ymsgr) isn't associated with any program. I try to email or IM a link or info on a web page I get this error message. How can I send an email or IM?

Protocol error usually indicates that the very leftmost part of the URL is not recognized.
So http://, ftp://, rtsp://, usually work.
ableton:// would need to be added by some software somewhere...
Can you get instructions from the vendor? Does these posts seem relevant:
[http://forum.ableton.com/viewtopic.php?f=32&t=112368 Ableton Forum • View topic - [dds] Bug with Fireforx browser and downloading project?]
[http://forum.ableton.com/viewtopic.php?f=32&t=109918 Ableton Forum • View topic - [gck] Problem downloading shared sets from Ableton server.].

New PC with Windows 8.1 trying to sync phone but receive following error message and don't know how to fix: iPhone cannot be synced. You do not have enough access privileges for this operation.

In downloading iTunes onto my PC (Dell XPS 8700) with Windows 8.1 trying to sync my iPhone but receive keep receiving following error message and I just don't know how to fix: iPhone cannot be synced. You do not have enough access privileges for this operation.
I would greatly appreciate help with this matter.

See if the user tip helps: https://discussions.apple.com/docs/DOC-6562

Getting this error message Firefox doesn't know how to open this address, because the protocol (ableton) isn't associated with any program

Firefox doesn't know how to open this address, because the protocol (ableton) isn't associated with any program.
I keep getting this message even though the ableton software was installed and authorized

Protocol error usually indicates that the very leftmost part of the URL is not recognized.
So http://, ftp://, rtsp://, usually work.
ableton:// would need to be added by some software somewhere...
Can you get instructions from the vendor? Does these posts seem relevant:
[http://forum.ableton.com/viewtopic.php?f=32&t=112368 Ableton Forum • View topic - [dds] Bug with Fireforx browser and downloading project?]
[http://forum.ableton.com/viewtopic.php?f=32&t=109918 Ableton Forum • View topic - [gck] Problem downloading shared sets from Ableton server.].

HT3775 I recently upgraded my OS to Mountain Lion 10.8.2 and cannot open up .avi files now in Quicktime. I get this error message: The document "ANDREW_McD_MEDIA_VERSION.avi" could not be opened. A required codec isn't available.

I recently upgraded my OS to Mountain Lion 10.8.2 and cannot open up .avi files now in Quicktime. These same files opened up with no problem prior to my upgrade. Additionally, I had upgraded to the Pro version of Quicktime recently, but it appears I've retrograded back to the basic version, unexplainably.
I get this error message: The document “ANDREW_McD_MEDIA_VERSION.avi” could not be opened. A required codec isn't available.

Hi,
I had exactly the same problem & found the answer here https://discussions.apple.com/thread/3219982?start=0&tstart=0 . Download a program called Perian, very easy to download worked a treat. I wish all fixes were this easy - Debbie

I keep getting this error message and cannot back up my Mac Book Air to MacBook Air to Time Machine; "Air.sparsebundle" is already in use" how do I correct this?

I keep getting this error message and cannot back up my Mac Book Air to Time Machine; "Air.sparsebundle” is already in use" how do I correct this?

Restart the Time Capsule. Launch AirPort Utility and check for a firmware update.

I keep getting this error message and the spinning wheel on all websites, any fix? (Webpages are not responding, so loading cannot be stopped. Do you want to force reload this page and all pages in other tabs and windows?)

I keep getting this error message and the spinning wheel on all websites, any fix? (Webpages are not responding, so loading cannot be stopped. Do you want to force reload this page and all pages in other tabs and windows?)

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

Have Spotfy, Facebook App on home computer, trying to open on laptop and get this ERROR CODE: Firefox doesn't know how to open this address, because the protocol (spotify) isn't associated with any program. How can I fix?

I have used Spotfy Music App on Facebook on my home computer, now trying to use on laptop, and i get this ERROR CODE: Firefox doesn't know how to open this address, because the protocol (spotify) isn't associated with any program. How can I fix this? Thanks in advance for any help

Hi,
You may have to install the Spotify application on the laptop to get Spotify protocols recognized.

TS1368 I keep getting this error message and can't open the iTunes store. I've reinstalled iT a half dozen times with no results. "Registry settings used by the iT drivers for importing & burning CDs & DVDs are missing" reinstall iTunes

I can't open the iTunes store and keep getting this error message. "Registry settings used by the iT drivers for importing & burning CDs & DVDs are missing. Reinstall iTunes." I've reinstalled iT a half dozen times with no results.

You might have two different things going on at once here.
Starting with the registry settings message.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

TS1717 ATH.exe has stopped working. How do I stop getting this error message and fix the problem?

I keep getting the error message ATH.exe has stopped working. How do I fix the problem so I don't the error message anymore?

There is a problem that Apple needs to fix (ha ha.. there are many but I digress) with ATH hanging after an ios device has been removed from the USB slot.
Re-inserting the device creates a new ATH instance which has some kind of conflict with the existing (hung) instance.
The solution is to end the process using CTRL-Alt-DEL and under processes there will mostlikely be two (or more). Kill them both, re-insert your device and it should sync OK.
Apple - please fix this (and the firewall problem) immediately.

The instructiion at 0x5de7cfe3 referenced memory at 0x00000004. The memory could not be read. I keep getting this error message, and iTunes keeps opening automatically.

I upgraded to 10.5 last weekend, and since then my iTunes keeps popping open. I get the error message above, but sometimes the first "code" is different, the last time it was 0x6473cfe3 instead. So irritating....

Try updating your QuickTime Player to the most recent version. Does that clear up the launch errors in iTunes?

I keep getting this error message and Firefox won't start....Exc in ev handl: Error: Error setting property on NPObject!

Firefox won't start and this message keeps coming up....I uninstalled and reinstalled....but didn't help...
Exc in ev handl: Error: Error setting property on NPObject!

Disable "McAfee Site Advisor" extension which was just updated to 3.4.0, which probably took it out of the addons block list.
* "Ctrl+Shift+A" > find McAfee Site Advisor and use "Disable", and then restart Firefox.
* Do a Google Search no problem
* It seems that if you re-enable Site Advisor again, and restart Firefox you are okay. At least you know where to look if you get the error again or Google searches slow down.

Problem with uploading files to SharePoint 2013 in cloud using web services. Keep getting error message and don't know why.

Hello everyone. I am having trouble writing a utility that uses SharePoint web services to upload a file and metatag it. It keeps throwing the following error message:
"The request failed with the error message: -- <html><head><title>Object moved</title></head><body> <h2>Object moved to <a href="/_forms/default.aspx?ReturnUrl=%2fsites%2fgk%2f_vti_bin%2fcopy.asmx">here</a>.</h2>
</body></html> --."
Not sure why. I pass the file that I am going to upload to the subroutine and it is suppose to upload it to the appropriate library. I have burned several days on this problem and I am not sure what is going on. I would appreciate anyone that can point me in
the right direction. Below is the subroutine that I have that is causing the problem. Obviously, I have stripped the name from the example.
Thanks
Mike
******** <Begin snip of code> **********************
Public Shared Sub CreateNewDocumentWithCopyService(ByVal fileName As String)
Dim c As New copyservice.Copy
c.PreAuthenticate = True
c.Credentials = New System.Net.NetworkCredential("[email protected]", "mypassword")
c.Url = "https://x.sharepoint.com/sites/gk/_vti_bin/copy.asmx"
Dim myBinary As Byte() = System.IO.File.ReadAllBytes(fileName)
Dim destination As String = "https://x.sharepoint.com/sites/gk/Gatekeeper%20Reference/" & System.IO.Path.GetFileName(fileName)
Dim destinationUrl As String() = {destination}
Dim info1 As New copyservice.FieldInformation
info1.DisplayName = "Title"
info1.InternalName = "Title"
info1.Type = copyservice.FieldType.Text
info1.Value = "new title"
Dim info2 As New copyservice.FieldInformation
info2.DisplayName = "Modified By"
info2.InternalName = "Editor"
info2.Type = copyservice.FieldType.User
info2.Value = "-1;#servername\\testmoss"
Dim info As copyservice.FieldInformation() = {info1, info2}
Dim resultTest As New copyservice.CopyResult
Dim result As copyservice.CopyResult() = {resultTest}
Try
' When creating new content use the same URL in the SourceURI as in the Destination URL argument
c.CopyIntoItems(destination, destinationUrl, info, myBinary, result)
Catch ex As Exception
MsgBox(ex.Message)
End Try
End Sub
******** <End snip of code> **********************

Hi,
If you want to upload a file to a library in SharePoint 2013 online, I suggest you use Client Object Model or REST API.
The code snippets in the two threads below will be helpful:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/deac7cb7-c677-47b0-acdc-c56b32dfaac8/uploading-bigger-files-using-csom
http://stackoverflow.com/questions/17057074/how-to-download-upload-files-from-to-sharepoint-2013-using-csom
Uploading Files Using the REST API
http://blogs.msdn.com/b/uksharepoint/archive/2013/04/20/uploading-files-using-the-rest-api-and-client-side-techniques.aspx
You can handle the authentication with
SharePointOnlineCredentials object:
http://www.vrdmn.com/2013/01/authenticating-net-client-object-model.html
Best regards
Patrick Liang
TechNet Community Support

I am getting this error message, and don't know how to resolve it: 3D features require a minimum of

Similar Messages

Maybe you are looking for