I am getting this error message while accessing IT2002 Counting rule 2/01/001 does not exist Message no. 3H010

hi All,
I am getting this error message while accessing IT2002
Counting rule 2/01/001 does not exist
Message no. 3H010
Please guide ASAP
Regards,
Ayousef

Hi Ahmed,
Please go through the below mentioned thread.
scn.sap.com/thread/1187160
Regards,
Haranath

Similar Messages

[Solved] Error : The file or folder path /Probl?me 1 does not exist

Hello,
I encountered this error
The file or folder <path>/Probl?me 2 does not exist
while I was trying to open a directory already extracted from a zip file containing directories with special characters. In this case, it is a "è" that was misinterpreted as a "?".
I searched the forums and on google, the solutions proposed do not work for me. Although, I have to deal with these files written in french, I would like to have my locale in english (US), with a system wide support for special characters.
Attempt 1: Adding the option : iocharset=utf8 into the fstab, like this :
fstab :
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
/dev/fd0 /media/fl auto user,noauto 0 0
/dev/disk/by-uuid/24ba75ac-e52d-40eb-a599-83b394b500b2 /boot ext2 defaults 0 2
/dev/disk/by-uuid/c797f409-00bc-479a-b4d6-ab49943f644b / ext4 defaults 0 1
/dev/disk/by-uuid/668427a8-5f51-42bd-a316-fc7984bf5f4f /var ext4 defaults 0 2
/dev/sda7 swap swap defaults 0 0
/dev/disk/by-uuid/417cd1b7-8f06-414b-84d5-e8714d9646ab /home ext4 defaults 0 2
/dev/disk/by-uuid/ef9aa00e-0515-4d7b-aa23-8096e787250d /usr ext4 defaults 0 2
/dev/disk/by-uuid/17d401b7-2fc7-4d9f-8e17-657d86926d2e /tmp ext4 defaults,iocharset=utf8 0 0 <<<<<<<<<<<<<<
/dev/disk/by-uuid/71e543b6-e06c-4b0e-b1e3-3b491ff1fefe /var/cache/pacman/repos ext4 defaults 0 2
#/dev/sda12 /mnt/archive ext4 defaults 0 2
#.host:/ /mnt/hgfs vmhgfs defaults 0 0
This solution does not work, because after adding iocharset=utf8, in front or after a "defaults", after a reboot, while mounting the filesystem, there is the following error message:
Mounting Locale Filesystem :
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
$ dmesg | tail
phy0: Selected rate control algorithm 'iwl-agn-rs'
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda10): Unrecognized mount option "iocharset=utf8" or missing value <<<<<<<<<<<<<<
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
Adding 2104476k swap on /dev/sda7. Priority:-1 extents:1 across:2104476k
tg3 0000:07:00.0: irq 44 for MSI/MSI-X
Attempt 2: Changing all the locale features in KDE and in /etc/rc.conf as well.
$ vim /etc/rc.conf
LOCALE="fr_CA.utf8"
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
It is complicated to remove these directories. I had to use the inum to get precisely these directories before removing them.
$ ls -il
total 8
1577566 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 1
1577573 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 2
$ find . -inum 1577566 -exec rm -i {} \;
rm: impossible de supprimer « ./Probl\212me 1 »: est un dossier
Note that the hypothetical character 'è' is represented has a '\212', a 'È' if seen as a extended ASCII character.
These directories cannot be deleted this way :
$ rm -r Problème\ 1
rm: cannot remove `Problème 1': No such file or directory
or
$ rm -r ProblÈme\ 1
rm: cannot remove `ProblÈme 1': No such file or directory
What should I do to be make the operating system recognize those special character, and interpret them correctly ?
Last edited by ramboman (2011-01-29 21:45:50)

I found a working solution, but better solution are also welcome
I had to have fr_CA not only in utf8 but also in iso88591. I had to modify the /etc/rc.conf this way :
LOCALE="fr_CA" <<<<<<<<<<<<<<
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
To preserve the english US language system wide, I had to add the following line in the /etc/profile :
# Allow french special character while in en_US
export LANG=en_US
The character misinterpreted by a "?" is now seen :
as a "è" in dolphin
as a "?" in the console
It is now possible to access the folders.

Why i am getting this error:205 while downloading creative cloud

why i am getting this error:205 while downloading creative cloud?

Please check the points and steps below:
Computer should be on Home network.
Disable the firewall.
Reset internet explorer & disabled add ons.
Disable any Anti-Virus installed on the machine.
Try in Safe mode in case of Windows & root user for Mac.
-Ankit

HT201209 I bought my Apple iTunes & Apple AppStore Card's at Best Buy, but when I try to use them I get this error: The Gift Certificate or Prepaid Card code you entered has not Ben properly activated. What did I do wrong or did Best Buy not scan it right

I bought my Apple iTunes & Apple AppStore Card's at Best Buy, but when I try to use them I get this error: The Gift Certificate or Prepaid Card code you entered has not Ben properly activated. What did I do wrong or did Best Buy not scan it right! Real Geniuses in that store!

If so, then review the first link to see if you can troubleshoot your issue yourself. If that doesn't work, then contact iTunes Support via the second link below:
Invalid, inactive or illegible codes:
http://support.apple.com/kb/TS1292
Contact iTunes support here:
http://www.apple.com/support/itunes/contact/
Cheers,
GB

After I optimize my pdf I get this error "Cannot extract the embedded font 'FONT NAME' Some characters may not display or print correctly.

After I optimize my pdf I get this error "Cannot extract the embedded font 'FONT NAME' Some characters may not display or print correctly.

This Acrobat forum may be a better place to ask: https://forums.adobe.com/community/acrobat/creating__editing_%26_exporting_pdfs

Error: This application required an Xtra (ActiveX...) that either does not exist or failed

Hi All,
im having trouble few days now , i hope someone can give me a lead here.
i have a director mx file written in arabic, i open it in Director 11.5, the file behave strangely, very slow publishing process, very slow access to the xtra list.
after publishing (shockwave and html), i open the html, the preloaded start to run but i can see its not reaching 100%, after a while i get the error massage:
"This application required an Xtra (ActiveX...) that either does not exist or failed..." and firebox or IE crashes.
In the movie extra list (Modify menu) i can see all extras, and all have "download if needed", but in ActiveX the "download if needed" grays out. i have no idea why
things i try with no success:
uninstall and reinstall shockwave player
check the same file in another machine
exclude and include xtras in Publish Settings > Files
add activex.x32 from other places
Hope for good news
Win Xp sp3
Thanks
Shay

In the movie extra list (Modify menu) i can see all extras, and all have "download if needed", but in ActiveX the "download if needed" grays out. i have no idea why
Because AX controls aren't SW-safe. You will have to redesign your file to remove the ActiveX control if you want it to run in a browser.

Error PG008 - Infotype does not exist message

I created a custom HR infotype in our development client and tested it via PA30 and it works fine. Once transported over to the Test client I am getting a 'Infotype does not exist' message in PA30. I checked all of the transports and config and the only table where I can see a difference is in the T591A table. This infotype does not contain any subtypes and when I access this table in the Development client I get a 'no data for IT9013' message. When I try to access this table in the Test client I get the 'Infotype does not exist' message. Does anyone know what I may have missed or how I can correct this? Thanks!!

Please check your transport log in SE09 for any warnings or errors.
thanks.
JB

FTXP-error-Domain MWART fixed value does not exist- Message no. F4341

Hi,
I am trying to created a new record for a tax code, and i get this error
Domain MWART fixed value does not exist
Message no. F4341
I looked up OB40, and not sure how to fix this. Do you know how to check the tax codes? How to validate OB40?
Thanks.

Hello,
Please follow this procedure for the input tax codes which experience
the error F4341:
1) Go to SE16 and enter table T007A
2) Hit enter and in the next screen choose the following parameters
   and enter values that represent the tax code for input tax which are
   encountering the problem.
   KALSM (tax procedure)
   MWSKZ (tax code)
3) Click on the "execute" button.
4) Take special attention to column MWART which represents tax type.
   This should only have a value "V" to represent input tax (or "A" if
   output tax).
5) The cause of the error F4 341 is when this column does not contain
   any value or is blank. Which means that there is no defined tax type
   "A" or "V" maintained in customizing.
6) To correct this you should maintain the value again via FTXP for the
   corresponding tax codes and complete all the customizing settings
   relating to tax on sales and purchases thereunder. Afterwhich you
   should no longer experience the error message.
Regards,
REnan

Connection failed: SQLState:'01000' SQL Server Error:67 [Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). Connection failed: SQLState:'08001' SQL Server Error:17 [Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist o

Help,
setup a new sql server 2012 on a windows 2012r2 server to replace old sql server 2005 on an old windows server 2003 machine. When i test the ODBC connection locally on the server it works fine, however when i try to connect via windows 7 client machine
i get the following error:
Connection failed:
SQLState:'01000'
SQL Server Error:67
[Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen
(Connect()).
Connection failed:
SQLState:'08001'
SQL Server Error:17
[Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
I think it must be a permissions thing, I've turned off the firewall for now and still no difference, 've also made sure remote connection is enabled. I can connect to the other sql server in studio manager on the new machine however, i can't go do
the same in the old server, says:
cannot connect to hbfsqlpro1\hbfsqlpro1
Additonal information a network related or instance specifc error occured while establising a connection to SQL server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL server is configured to
allow remote connections. (provider:SQL Network Interfaces, error 26 - error locationg server/instance specified) (Microsoft SQL server)
the instance is def correct, as that is what i use to connect locally on the new machine and what it comes up on the studio manager on the new machine. STarting to pull my hair out somewhat, i'm sure it's something really simple!

Hello,
You are trying to connect to a named instance. Make sure the SQL Server Browser service is started on the SQL Server computer.
Make sure TCP/IP is enabled.
http://msdn.microsoft.com/en-us/library/ms191294(v=sql.110).aspx
Try to disable Windows Firewall or security software on both, SQL Server instance and client computer.
Test basic connectivity too. Try to ping from the client computer to the SQL Server computer.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Sales order stock does not exist Message no. M7184

Hello Gurus,
I am getting this error while creating post goods issue.
"Sales order stock 1000000276 000010 does not exist Message no. M7184"
When i do MMBE it shows :
Finished Store 2300 Unrestricted use 2000
We are using MTO and in MRP 3 we have strategy group 20.
What i suppose to do in order to do PGI without any issue. Means SO -> Delivery ->PGI
Regards

HI
check your process that means for MTO cases Stock will be assigned to sale order line item so try to assign the stock to sale order line item
Assign stock to Sale order line item :
Go to MB1B , use movement type 411 and special stock indicator E , enter plant and Storage location and assign the stock to that Sale order and line item number
Check and Revert
Regards,
Prasanna

Item 000010 does not exist Message no. V1331

Hi Experts
While creating third party sales order with Item Category "TAS", I am getting the error "Item 000010 does not exist
Message no. V1331" . What would be reason for it and also kindly help me with the solution for this.
Thanks and Regards
M.Dheerendar Jain

Hi,
Check the following OSS notes, if they're applicable:
127309      Error V1331 when you create sales orders
420093      Message V1331 with item entry in the sales order
1375071      Message V1 331 when you create subitems using IDocs
Regards,
Raghu.

Object does not exist : MESSAGE OL 826 - Production issue

R/3 release 4.6C
Transaction: FB03
Custom WF: Triggering events: FIPP-CREATE and FIPP-COMPLETED
When we try to post a document (journal) the workflow gets triggered and reaches the approver. The approver approves it and then it gets posted.
Here in this case, after the approval the workflow running into error with u201Cmessage OL 826 Object does not existu201D
When I click on the message I get this information
Object does not exist   :   Message no. OL 826
Diagnosis :   You tried to create an instance of the object type EMPLOYEET with the
                    key 1234520080603. No instance of this kind exists.
                PERNR u2013 12345
     Date      - 03.06.2008
I checked this using the FM P_EMPLOYEE_CHECKEXISTENCE and it is working fine there. This FM is used in EMPLOYEET object for existence check.
Initially I thought the problem was with document and the buffer but after checking u201Cdiagnosisu201D message, it confirms me that this is related to Employee.
This is happening only to one employee and all other have NO issues.
I have checked with HR team and they reckon everything is fine from their side.
Since this is in Prod I am unable to debug and test.
I was looking into the previous forums to find the solution but couldnu2019t find RIGHT one. Could you please suggest any solution for this ?
Your help greatly appreciated.
Sreethan
Edited by: SAP User on Jun 12, 2008 12:13 PM

Dear Mike/Martin,
        Could you please explain a bit about the authorization problem?
        PERNR    A, B, C, and D do the posting the docs through FB01 and PERNR X usually do the approvals. the problem is happening onlyl with PERNR A ... if the approver has the auth problem then it could be same issue with other... please correct me if I am wrong.
    As Martin suggested I have contacted HR team but they say .... they dont see anything different or changes for this EMP. The personal record is coming from the EVENT FIPP-CREATE or COMPLETED so there is no manual interaction.
Just guessing: if this is the problem for all the employees then what could be the reason ? guessing that in random it is happening to this emp. He has posted 6 docs....all of them have the same issue. I checked last 3 months records and I did see Couple of workflows in last 3 months with the same error.... so just thinking if this is the problem with all emp happens onlly ramdomly.
Thoughts ??
Thanks & Regards,
Sreethan

Error rendering element. Exception: ORA-00942: table or view does not exist

Guru,
We are maintaining 10 internal Database through OEM 10g and using seesded reports.
When we try to create simple custom reports against one of the Target database , its failing with following error message ,
Query : select * from v$database
Error rendering element.
Exception: ORA-00942: table or view does not exist
select * from dual & v$session working ( But query execution happeniing from Reposistory Database not from Target instance )
Note:
I have reviewed thred "getting ORA-00942 while running report in GC"
Please give some light .
Regards,
Raju

This is an EM related question so I would suggest you post in the appropriate space "Enterprise Manager" -- https://forums.oracle.com/community/developer/english/enterprise_management/enterprise_manager/enterprise_manager_6
You may also review (In Grid Control 10.2, Creating a Report to Query 'V$SESSION 'Fails: 'Error Rendering Element. Exception: ORA-00942 Table Or View Does Not Exist' (Doc ID 356755.1)) and implement the solution for v$database
Thanks,
Hussein

Parked document 1000 700010042 2010 does not exist, Message no. FP076

Hi,
There is one Document which is not on tax return but made a entry in a GL account (VAT).
When I display document from FB03 for fiscal year 2010 the transaction code FB03 is diverting to FBV3 and giving error message : "Parked document 1000 700010042 2010 does not exist" "Message no. FP076"
I also checked the tables "BSEG" & "BKPF" where this document is visible to me also I checked the GL line items from FBL3N for the VAT GL where this document is showing in line items report, but when i double clik to display this documents again am getting screen of FBV3 with the same error message.
can any one let me know what could be the problem? and how to resolve this issue?
Many thanks in advance.
Regards,
Abdul

Hi Venkata,
Thanks for the information....
Addition to the above information ... there are 3 line items are there in this document 1 - K (Vendor), 2 - S (GL).
The strange thing I can see is against 1st line item (K-Vendor) there is a clearing document updated.
So if there is a clearing document against vendor line that means this document is no more in parking ...
I am not sure why system is performing like this...
Can anyone help me on this ....
Thanks in advance.
Regards,
Abdul

Infotype 2001 Record 00000000 000000000000000000000000000 does not exist Message no. PG225

Hi,
I am trying to create a record in infotype 2001 but getting error
Record 00000000 000000000000000000000000000 does not exist
Message no. PG225
This error not come before. I have created many records for the last few months.
Please suggest how to resolve.
Regards,
Pathi

Hi Pathi,
I guess this is because of Activity Allocation and Cost Assignment. Plz check the Number range assignment:
PA05 for Number range assignment for additional time data
PT12 for HR document posting
Thanks'
Gautam

I am getting this error message while accessing IT2002 Counting rule 2/01/001 does not exist Message no. 3H010

Similar Messages

Maybe you are looking for