I am going to buy a GX60 - but have several questions!

Hello folks,
Im a huge fan of MSI products and have decided to upgrade from my CR630 to a GX60. But I am trying to find out what upgrades I can do with regard to storage/SSDs. I keep finding mixed information and I am struggling to clarify what I am buying. The model specifically I am looking at buying is the "GX60 3CC-296UK".
So:
1) Does this have two standard 2.5" SATA bays i.e. one standard 2.5" HDD and one 2.5" SSD? Because I have found one website that seems to think it has one standard HDD and two mSata slots.
2) I have found another website which claims that it can have one standard HDD and "up to 128Gb SSD". Why is it limited to 128Gb on a particular SATA channel? Or perhaps that some websites sell this with a 128Gb SSD pre installed!?!
and
3) Usually when a device has USB3.0, it also has SATA 3. Does this laptop take advantage of the 6gb/s of SATA 3 if I did put a SSD into it? I have found another website which seems to think the laptop is only SATA 2 i.e. 3gb/s.
For anyone who has taken the time to read this, thank you for your time and would greatly appreciate anyones thoughts if they are able to assist!
Regards,
Iain

Quote from: mockingbeard;109835
Well It arrived today and sadly I am a little disappointed.
First I have never used Windows 8 before, but couldn't even get into windows without being coerced into making an account with microsoft (not going to happen) and agreeing to terms and conditions with Norton Symantec (again, not going to happen).
So, within minutes - cheerio windows 8, hello windows 7 ultimate. So to BIOS we go! Before I could change boot priorities and what do I find...
HGST 1Tb - yeah not going to happen either.
I didn't spend all this just to be stuck with a deathstar in my laptop. It's like saving up for a BMW 5 series only to find a Renault engine.
I actually had a stopclock running for a laugh. It took 9 mins 23 seconds from opening the box to me removing the warranty sticker to rip that piece of S£%$ HDD out and replace it with a WD Black.
As for the RAM? Something generic would be nice, you know something I can buy another of. A specially made Kingston RAM module with a model number starting MSI - oh goody, so when I upgrade to 16gb I need to buy a whole new set just to get a matching pair.
MSI, I love you to bits - but this is testing my patience and better be bloody good once I get it going...
1) Get used to it. Windows will keep the windows login authentication (any hotmail.com account works btw) in windows 9 and up. It isn't going away. So have fun when windows 7 loses support in 2-3 years from now.
2) As for norton.. you could have just removed it, it is not tied to anything with MSI and really is just a standard free bloatware crap you get in any computer these days.
3) Hitachi has been purchased and fully owned by WD. Your WD Black is simply a HGST these days.
4) The MSI ram in it, is nothing more but a rebranded Kingston ValueRam, so any Valueram from kingston works as long as it uses the same specs as the laptop.
Also turn of Fast Boot in the Bios to allow the laptop to boot from the DVD, or simply press F11

Similar Messages

  • Today i am going to buy iphone 4s . i have some questions.

      i wanto to buy   IPhone 4S off contract from apple store , will they sell it to me?  is it a factory unlocked  iphone??  if i need any repairs in the future .what happens if i send it to repair , will they give me a AT&T phone ,   do i need to wait for the "factory" unlocked that is supossed to come in november ?  the last one ,
    when there is an update for the iphone, i want to update it. but my iphone is factory unlocked . and i was wondering if it will still be factory unlocked if i updated it?
    because i just heard .someone already bought a  free-contract iphone 4s at the apple store. you just need to CONNECT to itunes and then it said," congratulation your iphone has been unlocked"   is it true ?        can someone answer my question?       
    i am waiting for your question......................
    [ thank.]

    That is impossible since every iPhone sold in the USA until the November release will have some sort of sim card in it. What differs is whether you purchase subsidized or not. Once the item is purchased without any subsidy it is automatically unlocked. I've unlocked two so far just by plugging them into iTunes: "Congratulations, your iPhone has been unlocked".
    The unlocked packaging will be exactly the same but will have different SKU numbers and will not come with a sim card and will have an ejector tool.
    I just had some issues replacing my unlocked phone since it was malfunctioning. They replaced it with a locked unit & then came to the conclusion they are unable to unlock it. I had to return the phone and repurchase another for the unlock to work again. Come Novemeber they will have actual "unlocked" replacements.

  • I am looking to buy an imac but have some questions...

    Is it possible to use "windows only" software on any mac? I have some photo editing software that I use that is windows only.
    Thanks!
    Kari

    As Duane mentioned yes you can use Boot Camp which is part of Leopard to boot your machine to either Leopard or Windows. Again as Duane mentioned you will need a license of Windows to do it. By using Parallels or VM Ware's Fusion these allow you to run Windows inside of Leopard, again you need a license of Windows to install. Personally I use Fusion, the performance on my iMac is faster than my new new Windows notebook supplied from work. The main advantage of Parallels or Fusion is you don't need to turn off your machine and reboot into a different OS.
    Depending on the Windows software you are running you may find a Mac equivilant and rather than investing in Parallels or Fusion you can invest in that and run everything in Leopard's native enviorment.
    If you have a Apple store close by drop in and they can show you exactly what I've described.

  • Every time I try to update the 4s or 4 it is saying not enough storage. I am really hating this phone now because I am not going to buy storage. We have 5 iPhones on our account and now because of iCloud it does this.

    Every time I try to update the 4s or 4 it is saying not enough storage. I am really hating this phone now because I am not going to buy storage. We have 5 iPhones on our account and now because of iCloud it does this.

    your iCloud storage isnt part of your phone, that is a back up for your phone, you have to delete things on your phone, so I recommend backing up your photos to your computer or iCloud since im sure thats whats taking up all your storage, then delete the photos on your phone and then update your phone using iTunes on your computer.

  • Love App Tabs but have several that just show a white page as icon how do I get them to appear as a site logo?

    I love the new App Tabs but have several that when pinned just show a white page as the icon, so you have to mouse over them to figure out which one is which. Example is bankdirect.co.nz. Is there a way of getting the site logo to show up so you can see what is what at a glance but still have the nifty space saving size of the App Tab? Thanks!

    SergZak
    Thanks for that. I have to say that there were a couple of screens that appeared to show both the iPhone and iPad and it was the iPad that was showing the icon!
    It is not life threatening, I just thought that something had not installed as it should have.
    Demo
    Thanks for your comment.
    Cheers
    altv

  • Looking to buy but have some questions

    I'm currently using a Mac Mini and Frontrow, I'm hoping to replace this with the AppleTV but have a couple of questions I hope someone can help with.
    1) Can the screen saver display photos from iPhotos on the Apple TV, same
    way as a Mac does.
    2) I'm looking to export all my movies from EyeTV to the AppleTV format, all
    my movies have descriptions in them and I know these are exported to the
    AppleTV format. However does AppleTV show you this information when
    you browse your movies, I know Front row doesn't
    3) Can you just "copy" movies to the AppleTV or do they have to be synced,
    as I have a small drive on my Macbook, it would be great to just copy them
    over to the AppleTV and deleted them from my Macbook.
    A lot of questions I know but would really appreciate any help

    1) Can the screen saver display photos from iPhotos on the Apple TV, same
    way as a Mac does.
    Slightly differently, I'd say better.
    2) I'm looking to export all my movies from EyeTV to the AppleTV format, all
    my movies have descriptions in them and I know these are exported to the
    AppleTV format. However does AppleTV show you this information when
    you browse your movies, I know Front row doesn't
    The tv shows some fields on the tv screen, eyetv doesn't always put these descriptions where tv can best use them, however it isn't too difficult to move them around in get info.
    3) Can you just "copy" movies to the AppleTV or do they have to be synced,
    as I have a small drive on my Macbook, it would be great to just copy them
    over to the AppleTV and deleted them from my Macbook.
    No they have to be synced. You can use an external drive for your itunes library though.

  • Considering Lightroom, but have some questions

    Interested in taking my photography to a new level...currently have a Mac and two Cannon DSLRs. In the past I have used I photo for 'developing' however it is limiting. I have used Photoshop and even taken a class in it at a JC however I find that it is not intuitive for me and am looking for something different....Loved Illustrator when I used it many years ago doing graphic design work so not totally discouraged by Adobe products. Hear someone talking about Lightroom recently and wanted to find out a little more about it...my questions are as follows:
    What are people's impressions of Lightroom? More intuitive than Photo shop?
    More functionality than iPhoto?
    Does Lightroom work well on the Mac? I have never used any adobe products on the mac, assuming they are similar, but have to ask the question.
    Can you buy the software without using the cloud and paying monthly fees?
    Thanks!

    Most people love it, once they learn how it works. All editing is non-destructive and adjustments are saved to a database (catalog). You don’t save files as you do in Photoshop or iPhoto. The settings are saved automatically and applied on export.
    Lightroom is more like Aperture than iPhoto. But Apple has dropped support for both apps so it’s a good time to consider Lightroom. LR6 is expected very shortly and you can take a 30 day free trial.
    Yes works well on Mac OSX
    Lightroom is available for outright purchase if you prefer not to subscribe to the Photography Plan ( LR+ Photoshop $9.99pm without any upfront capital outlay) however LR Mobile functionality and synchronization with iPad/iPhone is only available with a subscription.

  • How do I adjust the size of the window so I can drop videos from other windows? I am trying to decide if I am going to buy this application but there are too many problems already.

    I am trying out the Premiere Elements but I am not sure I will want to continue to use it. First problem:
    How do I get the window to go to a smaller size? I click on the box on the upper right corner but it still covers the whole computer screen and I cannot grab it and move it either. What is going on? I have an HP computer.
    Thanks for any help out there.

    popsierose
    I am assuming that you are on Windows 7, 8, or 8.1 64 bit.
    Not sure if there is another way, but the way that works for me
    a. right click the computer taskbar, and click on Cascade Windows
    b. in the Premiere Elements Expert workspace, go the the bottom right edge of the workspace view, place the mouse cursor at that point until its tip has a diagonal icon, and then drag upward right to left diagonally to give some view of the desktop where I have the file for the drag and drop into Premiere Elements....then drag and drop the supported file into the Timeline or Project Assets or a drag and drop location.
    Please let us know if that worked for you.
    Thank you.
    ATR

  • I was going to buy an iPhone, but...

    Now I'm hearing all this stuff about TONS of problems, it's getting me a little worried about spending 400 dollars and not getting a stable phone.
    Almost every thread on this forum is about an issue with the phone.
    Does it really have all these problems?

    No one in this thread has jumped on the OP. A statement was made and a question asked which was "aptly" answered.
    This is not an open discussions forum for any and everything as one sees fit regardless the title. Per the ToU for these Discussions, a post should be a technical support question or a technical support answer with "constructive" feedback welcome which many people here without a clue about what "constructive" means or how to go about providing it.
    Since each and every post here is not read by a Discussions Host or Moderator or by any Apple employee, the more appropriate avenue for providing Apple "constructive" feedback or otherwise is via the Feedback link.
    Do you have a technical support answer or any answer for the OP that applies or just want to jump on those who volunteer their time here to help others?

  • Going to buy an airport and have a few quick questions

    I am looking to buy an airport. I want to buy it used to save a few $$.. So I was looking on ebay and saw one which said the following"
    "This is the Airport Extreme Base Station, a great wireless router from Apple. It is model A1143, which is the model just before the current gigabit release. It does have the "n" speed, and comes with the owners manual, original CD disk, and the acutal base station and power supply. The only difference between this model and the current one is that the network switch speeds are 10/100 instead of the gigabit."
    What does this mean that it is 10/100 not gigabit? When did apple change the model? Doe it make a difference?
    Also.... I have a an airport express. That is not N speed. Does this mean that my entire network will not be "N" because of the fact that my airport does not go as fast as N?

    Apple replaced the model you are looking at with the current model (that has a gigabit ethernet switch) at the end of last summer. You can read about the improvements made in layman's terms at:
    http://www.macworld.com/article/59923/2007/09/airportextreme.html
    Does it make a difference? Yes, but (a) mostly if the computers you are planning to cable to it also have gigabit ethernet interfaces and (b) you do a lot of data transfer between computers on your network. If your network is mostly used for internet access and printer sharing, you won't notice any difference at all since the older model was much faster than most people's internet connection anyway.
    If you set up an Airport Express with an "N" base station - yes - speeds will slow down to the "G" speed of the Airport Express.

  • Looking To Buy A MacBook Pro, But Have A Question

    Hello,
    I am looking to purchase a 17” MacBook Pro and was thinking about getting 8 GB of SDRAM on it. My question is would all of the ram be able to be utilized in the system or would it just use up to 4GB of SDRAM. I am wondering about this because this is still a 32 bit system, right?

    With Snow Leopard, it's fully 64-bit (with a couple of minor exceptions), so it will make use of all 8 GB of RAM, if you max out the RAM.

  • About to buy a Mac Pro, have quick question please.

    Hi all,
    I am going to more than likely buy a Mac Pro 2.66 tonight or tomorrow, but I was wondering something in regards to graphics cars if any one could assist me.
    I am planning to go with the ATI card and 2gigs of ram since I do some gaming on the side and plan to use bootcamp for that.
    My question is that if I buy the machine in retail store, they do not credit the stock GeForce card and just add the ATI card in, so if I go that rout can both the ATI and Nvidia card both reside in the machine at the same time and be used in SLI mode?
    EG: can I get the power of both cards or will I only be able to use the processing power of one card? If only one card then would I be better off configuring the machine online since they credit you the difference of the Nvidia card which saves roughly $150.00 off the order from doing it in a retail store?
    Any help would be greatly appreciated. I am not worried about the $150.00, it would almost be worth it to spend the extra since the shipping time on the online configuration may end up costing almost the same unless I want to wait a few weeks for the machine.
    Whats your thoughts on this? Is it worth it to buy in the store and use both cards or just buy online from apple and get the credit for the Nvidia card?
    Thanks in advance!

    can both the ATI and Nvidia card both reside in the machine at the same time and be used in SLI mode
    No… SLI requires two Nvidia SLI capable cards. In addition, SLI is not supported under Mac OS X although does work, apparently, under Windows and Boot Camp. ATi's comparable technology is CrossFire.
    would I be better off configuring the machine online since they credit you the difference of the Nvidia card which saves roughly $150.00 off the order from doing it in a retail store?
    Financially yes as the Nvidia card is ultimately useless to you. One consideration though is the CTO conditions of return, or lack there of, in case you receive a DOA. In the US, amongst other countries, CTo unit are not returnable even if they are DOA so you should check the terms of sale in the country store you would buy from.
    Whats your thoughts on this?
    I, like many others, bought CTOs from the Apple Store so I don't think it's such a bad way to go. It also means you won't have any pressing need to open your new Mac Pro right away.
    One thing you might want to consider though is to downgrade the standard 250GB hard drive to a 160GB drive and use the saving on a drive of your choosing. Apple tends to use OEM desktop drives that have unimpressive performance. The 160GB drive in my Mac Pro didn't even get turned on. It was a Seagate Barracuda 7200.9 if you're interested.

  • Buying iPod touch 2g - have 6 questions

    Tomorrow most likely. The 16gb. $280 ($20 off at Wal-Mart 8-)
    Don't really care about the rumored iPod Touch 3rd gen; as the 2nd gen will be able to download the 3.0 software. I wouldn't use the camera anyways as it would probably only be 4 megapixels or less, and I have a 8 megapixel digital camera.
    Well, here are my questions.
    1.) Since it is bluetooth compatible, will I be able to use my headset as a microphone to record college lectures? I would place the headset near the professor if he allows it. I know it doesn't have a built in mic.
    2.) Hard case reccomendations? I heard good things about the Tumi T-Tech case. Id like for it not to hamper any of the functions.
    3.) Im going to convert AVI movie files to MP4 movie files. There should be no hassle porting those to the Ipod right?
    4.) Will I be able to drag my Mp3 song files into the folder which contains the songs? Or do I have to use iTunes. I feel that it is easier this way when you download from other music purchase programs.
    5.) If Apple does announce the new iPod touch within the next month, does that mean it will be out on shelves? Or that the features have just been announced?
    6.) Finnaly, screen protectors. I heard that you really don't need one. It's not like I would ever put it in my pocket with keys. What do you think?
    THANKS for ANY help!

    just to add my opinions: (i think the above post covers 1-3)
    4.) as Nocturnal says, you have to use iTunes. the iPod touch doesn't have a disk mode like other ipods, so the 'drag and drop' method which worked before will not work.
    5.) thought you weren't that bothered about it? lol. i would imagine they'll announce it before it is released. that's usually what happens isn't it? educated guess, we're looking at early september (that's when the last two gens have come out) if there is to be a new release. put it this way, i upgraded to an 8GB touch from a 4GB nano, before they brought in the app store. if it was just down to my music and podcasts, 8GB would be plenty, but now i'm seriously starting to think i need that extra space! but i won't be buying just yet.
    6.) i didn't bother with one, messed up putting it on, so just gave in. over a year later and i don't regret it. the back is a bit scratched, but that doesn't worry me greatly. i use a silicon case from http://www.exspect.co.uk/, it's starting to look a bit ragged (edges are splitting a little), but it does the job perfectly adequately for what i want.
    hope you enjoy your ipod touch experience, it really is an amazing toy!
    Message was edited by: Anna Sandham

  • Considering Airport Express purchase, but have some questions...

    Hi people.
    As per title. I'm considering purchasing this in the near future, but although i understand how it works, i just have a few questions...
    1) The unit has a USB port correct? I have an external HD & DVD drive, scanner and printer aswell as my iPod dock running off a USB hub. In theory, i should be able to connect a USB device to the AE to get it to work wirelessly, yes? So would it be the same if i ran the USB hub off it? (USB hub has it's own power supply too).
    2) I have a 2008 Aluminium Intel Mac, all up-to-date. Am i correct in thinking all i need to buy is the AE? Obviously i have the correct equipment to connect to the internet, and the Mac does have airport.
    3) The unit won't be that far away from my Mac-how reliable are the connections? Do they suffer from much interference? And how secure is the connection?
    Any advice or experiences welcomed!
    Dan

    1) - The USB port on the AX is usually a printer only port but I don't see why it would not function with ANY other USB devices. I am using a Time Capsule as the main router with a 500 GB Seagate drive and 3 printers connected (and working!) and supporting 3 AX units. You will have to find connected printers and drives via the Sys Pref ->Network menu (Browse)
    2) - That should be OK. You get the advantage of having a router firewall between you and outside. FWIW, I just sold an Airport Extreme for just under $100 on the "Bay" about the price of a new AX. Lacks an audio out port tho' but supports a USB hub system and passes AirTunes
    #) - Security.... once you have set up your passwords properly (big words with U/L case, symbols and numbers) it should be pretty secure to casual evesdropping. RFI - use AP Grapher (free) to see traffic on adjacent channels and choose accordingly.
    Hope this makes some sort of sense.......

  • Interested in buying iPad. I have a question

    I tried searching but didn't really find any answers specifically to what I'm looking for. I'm just wondering if I buy an iPad online or directly from apple, if I were to encounter any issues with it could I exchange or return to an apple store? Or would I have to send it back to apple? Thanks for any help.

    If you buy from Apple online, you can take it to an Apple store or call Apple to get assistance. I normally purchase Applecare for all my portable devices, and found it a worthwhile purchase.

Maybe you are looking for

  • EC CS Consolidation - How can i set up Consolidation for Corporate Group

    I have a task to set up consolidation for a Corporate group that has only the corporate office running on SAP and the other 18  subsidiaries are on other systems . Within the 18 subsidiaries  there are 2 companies that are assoicates.The corporate gr

  • Ssrs 2008 grand totals of report

    In an SSRS 2008 report, I am placing a grand total amount in the report footer since I want the amount at the very end of the report. The problem is when the report is exported to PDF, the amount is a long ways from where the detail lines are located

  • Canon MP 600 Bluetooth printing...

    Hello, The Canon MP600 simply will not print via Blueooth for me. I can control the device in Printer Setup Utility via BT. I can print via USB as well. I simply cannot work out how to get the infernal thing to print via BT. I am certain I am missing

  • Changing a member name in Essbase

    In my ASO cube - I need to change both a level 0 and parent member name in EAS. Is it as easy as edit member properties and typing in the new name? Does the existing data follow? Also, does going from lower case to upper case create a similar change

  • Built-in SQL code...

    Hi all, Anyone knows where can I find those built-in SQL code blocks? Regards, Gustavo.