I am have a problem with ACLs and permissions

How come my Public folder that is shared and has some shared folders has certain users and groups with permissions, like (ACLs) workgroup, _spotlight, (POSIX) system, wheel, everyone, but when they are on a client machine, they say (POSIX) <username>, staff, everyone.
Basically I don't get why they don't carryover to the Client side. Is feature? or something that has to be enabled? that I am missing...? Any help would be great full.
Thanks
Laters...
Message was edited by: rezwits

are the charecter like this Ж З И Й - someone had comented about a similiar issue - contacted applecare and they said reinstall os...call apple care for
safety

Similar Messages

Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution?

Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution? (No jailbreak)
Most of the time the iphone cannot reach any network and when it can, there is no data transfer, I can only make calls and sms.

Skizofrenias wrote:
Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution? (No jailbreak)
Most of the time the iphone cannot reach any network and when it can, there is no data transfer, I can only make calls and sms.
iOS: Troubleshooting Wi-Fi networks and connections
iOS: Wi-Fi or Bluetooth settings grayed out or dim

Hi! Everyone, I have some problems with JOIN and Sub-query; Could you help me, Please?

Dear Sir/Madam
I'm a student who is interested in Oracle Database and
I have some problems with JOIN and Sub-query.
I hope so many of you could help me.
if i use JOIN without sub-query, may it be faster or not?
SELECT field1, field2 FROM tableA INNER JOIN tableB
if i use JOIN with sub-query, may it be faster or not?
SELECT field1,field2,field3 FROM tableA INNER JOIN (SELECT field1,field2 FROM tableB)
Thanks in advance!

Hi,
fac30d8e-74d3-42aa-b643-e30a3780e00f wrote:
Dear Sir/Madam
I'm a student who is interested in Oracle Database and
I have some problems with JOIN and Sub-query.
I hope so many of you could help me.
if i use JOIN without sub-query, may it be faster or not?
SELECT field1, field2 FROM tableA INNER JOIN tableB
if i use JOIN with sub-query, may it be faster or not?
SELECT field1,field2,field3 FROM tableA INNER JOIN (SELECT field1,field2 FROM tableB)
Thanks in advance!
As the others have said, the execution plan will give you a better idea about which is faster.
If you're trying to see how using (or not using) a sub-query affects performance, make the rest of the queries as similar as possible. For example, include field3 in both queries, or ignore field3 in both queries.
In this particular case, I guess the optimizer would do the same thing either way, but that's just a guess. I can't see your execution plans.
In general, simpler code is faster, and better in other ways, too. In this case
tableB
is simpler than
(SELECT field1, field2 FROM tableB)
Why do you want a sub-query in this example?

I have a problem with Java and an e-procurement system integrating

I use an e-procurement system at work and yesterday I could not get my parts list from the suppliers web site to display in our in-house eprocurment finance package.
There is not a problem with the finance package. There is not a problem with the suppliers web site. I have verified both of these by other colleagues being able to complete what I am trying to do.
The difference between my version of Firefox and my colleagues' is that I am on version 6.0.1 and they are on 6.0.
I have had problems with Java not displaying certain animations on the suppliers web site but, my colleague does not and I am suspicious that this is the problem. Can anyone verify this please and what can I do about it. My Java updates are up-to-date as of yesterday and are automatic.
Thanks.

I was quite amazed I never got a reply to this, in the past people here have been helpful. In any case I was finally able to enter this website on the exceptions list in the Java panel, and I believe it is okay now.

Strange Problems With Display and Permissions Since 10.5.1 update.

Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
Here is a screen shot of the line and dock problem.
Here is a screen shot of my "About This Mac.
If anyone could lend some light on this issue, I would greatly appreciate it.
Thanks
Jeff

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

I have had problems with slow and non-responding Internet using Safari.

While my Windows-based laptop and iPhone access the Internet fine, we are having difficulties with our iMac accessing the Internet and, if we do get on, it is extremely slow.

If you mean movies you have exported from iMovie HD, those can be imported easily. If you mean iMovie HD projects opening in iMovie '11, I don't see many people have much success with that.

Problems with access and permissions

Hi,
I installed the 10.5.3 update, well software update installed 10.5.3, and it managed to completely bugger up my system. I could not boot up, nor could i safe boot. A verbose boot revealed it was stuck in some form of loop, loading something, which then quit due to an error and it continued to try and load it. I resorted to reinstalling os x with an archive and install due to my external disk breaking i could not restore from a time machine back up. BAsically the install managed to go wrong, and i ended up having to reinstall again. When i finally got to my desktop none of my settings had been carried over and they were in a previous system folder. I fired up migration assistant to copy it over because of the access and permissions stopping me from doing it manually. Migration assistant told me i needed a huge amount of terabytes to perform the migration! So i tried to do it manually.
Basically all my stuff is in my home folder but none of it is set to my new user name, all the rights are set to _Unknown which is, im guessing, my old user account. Is there any way to mass set the access and permissions to my new account, including that of all the subfolders and contents?
Any help would be appreciated, im at the end of my tether here! This is the 3rd time ive had problems with a leopard upgrade. Why does software update always fail to perform an upgrade?

From your account, open /Applications/Utilities/Terminal, and copy the blue text in, and press enter (you'll have to provide your admin password, which you won't see. That's normal.)
sudo chown -R `id -u`:`id -g` ~
After that finishes, the prompt with Computername:~ username$ will come back, and you can quit Terminal.
To be sure, you should log out and log in again.
Good luck!

Since I have installed Lion my computer doesn't shut down properly and I have constant problems with LR and Photoshop. Any suggestions?

Since I have installed Lion my computer does not shut down properly. I sometimes cannot eject a flash drive or eject a disc and my LR and photoshop constantly crash. I ran all the updates. Any suggestions? I purchased the upgrade online so I dont have a disc to reinstall it.

If you have more than one user account, these instructions must be carried out as an administrator.
If you have an optical drive, make sure there is no disc in it.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged during the time something abnormal was happening. That time might be before or after the boot.
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. If the problem is a system crash or shutdown failure, post the messages from before the boot time, when the system was about to crash or was failing to shut down. In either case, please include the BOOT_TIME message at the beginning or the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

10.5.5 update problems with firewall and permissions

Hello, I have a small office (4 people) with one server that has both leopard server (standard install) and filemaker server installed on it. I'm hosting our website, running ical services, file sharing and Firewall. I avoided doing any updates because everything was working well and I didn't want it to get screwed up. Well our website was hacked into so I went ahead and ran the combined update and restarted. Everything booted up fine and is working with the exception of Filemaker Server database access and webdav access to our site folder.
The Filemaker access is a firewall issue but I'm not sure about how to proceed. In order to open the appropriate port it seems I need to use server admin (instead of server prefs) and run the firewall from there. If I allow the Filemaker server service for "Any" doesn't that leave me vulnerable from the outside? if so how would I go about allowing it only to the internal file services?
For the webdav services when using Dreamweaver to upload files to our server I receive a permissions error not allowing me to upload any files. I have repaired permissions and still get the same error. My question is 2 part:
Any ideas on what to do about the permissions?
Would it be more secure to turn off webdav and create a share point ( I am local ) for the site folder with "others" read only privileges and my web designer read and write privileges?
If I continue to use webdav should I secure the folder using realms and give "Everyone" browse only privileges and my web designer Browse and Read/wright privileges?
Thanks in advance
Steve

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Problem with trigger and entity in JHeadsart, JBO-25019

Hi to all,
I am using JDeveloper 10.1.2 and developing an application using ADF Business Components and JheadStart 10.1.2.27
I have a problem with trigger and entity in JHeadsart
I have 3 entity and 3 views
DsitTelephoneView based on DsitTelephone entity based on DSIT_TELEPHONE database table.
TelUoView based on TelUo entity based on TEL_UO database table.
NewAnnuaireView based on NewAnnuaire entity based on NEW_ANNUAIRE database view.
I am using JHS to create :
A JHS table-form based on DsitTelephoneView
A JHS table based on TelUoView
A JHS table based on NewAnnuaireView
LIB_POSTE is a :
DSIT_TELEPHONE column
TEL_UO column
NEW_ANNUAIRE column
NEW_ANNUAIRE database view is built from DSIT_TELEPHONE database table.
Lib_poste is an updatable attribut in TelUo entity, DsitTelephone entity, NewAnnuaire entity.
Lib_poste is upadated in JHS table based on TelUoView
I added a trigger on my database shema « IAN » to upadate LIB_POSTE in DSIT_TELEPHONE database table :
CREATE OR REPLACES TRIGGER “IAN”.TEL_UO_UPDATE_LIB_POSTE
AFTER INSERT OR UPDATE OFF lib_poste ONE IAN.TEL_UO
FOR EACH ROW
BEGIN
UPDATE DSIT_TELEPHONE T
SET t.lib_poste = :new.lib_poste
WHERE t.id_tel = :new.id_tel;
END;
When I change the lib_poste with the application :
- the lib_poste in DSIT_TELEPHONE database table is correctly updated by trigger.
- but in JHS table-form based on DsitTelephoneView the lib_poste is not updated. If I do a quicksearch it is updated.
- in JHS table based on NewAnnuaireView the lib_poste is not updated. if I do a quicksearch, I have an error:
oracle.jbo.RowAlreadyDeletedException: JBO-25019: The row of entity of the key oracle.jbo. Key [null 25588] is not found in NewAnnuaire.
25588 is the primary key off row in NEW_ANNUAIRE whose lib_poste was updated by the trigger.
It is as if it had lost the bond with the row in the entity.
Could you help me please ?
Regards
Laurent

The following example should help.
SQL> create sequence workorders_seq
2 start with 1
3 increment by 1
4 nocycle
5 nocache;
Sequence created.
SQL> create table workorders(workorder_id number,
2 description varchar2(30),
3   created_date date default sysdate);
Table created.
SQL> CREATE OR REPLACE TRIGGER TIMESTAMP_CREATED
2 BEFORE INSERT ON workorders
3 FOR EACH ROW
4 BEGIN
5 SELECT workorders_seq.nextval
6    INTO :new.workorder_id
7    FROM dual;
8 END;
9 /
Trigger created.
SQL> ALTER SESSION SET NLS_DATE_FORMAT = 'DD-MON-YYYY HH24:MI:SS';
Session altered.
SQL> insert into workorders(description) values('test1');
1 row created.
SQL> insert into workorders(description) values('test2');
1 row created.
SQL> select * from workorders;
WORKORDER_ID DESCRIPTION                    CREATED_DATE
           1 test1                          30-NOV-2004 15:30:34
           2 test2                          30-NOV-2004 15:30:42
2 rows selected.

Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

Problem with dreamweaver and Flash

Hi, maybe someone can help me, i have any problem with
dreamweaver and flash, i have a page and i have a menu and
sub-menu, and the same page i have a category en flash 550 x 700 (
photography and more... ) but when the menu to unfold
the menu to see under flash and it cant see ( sorry my
english is bad.... i hope you can understand me, and help me.. )
i dont now why always flash ever stay up, or first, and
another information under flash... this a problem... if you have
menus...
thanks.... have nice day.....

This is a drawback of using flash or any other active
content. By default, all active content including flash will
display over every other content and thats why your menu stays
under the flash movie. Some people make the flash background
transparent to show content under the flash movie, but that will
not work for menu items.
I would suggest that you make the menu such that it does not
overlap with the flash movie.

Problem with Facetime and my MacBookPro camera

Hello,
I've got a MacBookPro and I have a problem with Facetime and my front camera.
When I have a discussion with an iMac or an other MacBook the image received by the other person becomes fix.
To unfix it I have to put my finger on my camera and then everything is good until the next time, 4 to 10 seconds later I've got the problem again.
Perhaps somebody can help me.
My head on my screen is always good even when the bug appear on my correspondent's screen.
For information, the 2 mac have the same iOS version (OSX Lion) and Facetime version.

Hi Dave,
Edit: Well, I guess I was lost when I posted this. My answer was regarding a problem with OS X, not iOS. I'm going to leave the answer here in case someone else with a Facetime for Mac issue can benefit, because when you're searching for "Facetime AND Login", you could land in any discussion area. -Jerry
Keychain Access.app is in your Utilities folder in your Applications folder.
The path will be: Macintosh HD > Applications > Utilities > Keychain Access.app.
Keychain is where all your passwords are stored for those applications that you don't want to have to manually log into all the time.
It's a handy app to become familiar with, for instance if you want to look up a password or user name from the past.
Hope this helps you.
Jerry

Problem with connecting and syncing (quicktime.qts)

Hi,
I have a problem with connecting and syncing my Iphone to itunes.
iphone alone on PC -> uploading files (fotos) is possible
itunes starts normaly, if iphone is not conected.
if i connect iphone after starting itunes, or if i start itunes after connecting iphone i get an itunes-error with message:
AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
ModVer: 7.65.17.80 Offset: 00909a47
i test different things...
- used another USB-port
- used another PC
- used macbook of my wife instead PC
- deinstalled and new installed of itunes (older and newer versions) folow tutorials of apple
- use another USB-Cable...
I'm resigned, Please help me..
Tom

AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
In this context, that can sometimes indicate trouble with a content file on the phone (or Touch).
Do you have any podcasts stored on the iPhone at the moment? If so, if you delete them from the phone, can you connect to iTunes without the error?

I am have a problem with ACLs and permissions

Similar Messages

Maybe you are looking for