I am having a major problem saving with keynote 6.2.

I recently bought a new MacBook which came with Keynote 6.2 preinstalled. I can make and save presentations in it fine. But when I later go to open those presentations with the exact same Keynote program I make them in, I get an error message saying I need a newer version of Keynote to open those files. I've double checked and my version of Keynote is fully updated, so I don't know what newer version it could be talking about. Can anyone explain how it's even possible to save in a file format that the program can't open? At the very least does anyone know how to change the default file format for saving?

The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. OWC has also tested RAM sizes above Apples official limit.
Crucial
Other World Computing

Similar Messages

  • I am having a major problem connecting to FaceTime. Message reads "unable to connect, check network connections". Yet I am online with Manila, Safari etc. any suggestions.

    I am having a major problem connecting to FaceTime today.  Message reads "unable to connect, check network connections".  I am online, mail works, ex
    Tc.  This was not a a problem two days ago.  Any suggestions?

    Could be that the servers are overloaded today.

  • Major problem saving and printing documents on two computers

    This is a bizarre problem that seems to have been transferred from my old MDD to my new Mini when I migrated all my old data and it has me baffled. My apologies if this explanation seems long and complicated but I want to be pretty thorough.
    About a month ago I started experiencing a problem with printing. I noticed when printing a sheet of business cards that the page was getting compressed, for lack of a better word, vertically. This was very noticeable because the trim marks on the side of the page were not lining up with the perforations and each row of cards was getting progressively closer to the top as each row was printed. In other words, the first row of cards was okay but then the next row was a little too far "north", the next row a little more, the next row a little more, etc. The bottom of the page was not cut off, it was just squeezed up a bit but not enough that you could tell that the proportions were off. Now I see that many of my documents are like that no matter what application I've use to create them – Pages, Illustrator, Avery DesignPro. What's even worse, I've used Pages to create a sheet of business cards for a friend and Illustrator to make packaging labels and she's having the same problem printing the PDFs of the labels on a different computer. What this seems to tell me is that something has been corrupted and the computer is saving messed up files.
    So, about ten days ago I got a Mini and migrated my data using Migration Assistant. And the problem has now been transferred to the Mini. So I now have two Macs connected to two different HP printers that are both incapable of printing (and apparently saving) documents in the proper proportions.
    Now, a truly weird thing is that I printed a test sheet of business cards from the Mini on the printer connected to the MDD (via printer sharing) and it appeared that the document printed at the correct length. However, another document, a sheet of labels created in Illustrator, printed at the right length but one edge was slightly cropped off. Grrr.
    Anyway, as I said, until about a month ago everything worked fine so something got messed up at that time to cause this problem with saving and printing documents. I need to get this resolved for business reasons – I'm an aspiring designer – but the only thing I can think of doing is wiping out my Mini and reloading everything except my account settings from Time Machine unless someone has advice on what to do. Help! (And yes, I've checked to see that page scaling was always set at 100%.)

    Well, I've just about had it. I erased the disk, reinstalled the OS, Adobe CS4, and iWork. I did not use Migration Assistant this time to restore my settings but still my Mac prints documents in the wrong dimensions. Could this be a sudden HP problem? It seems to me some system setting somewhere is making my computer save and print documents in the wrong size. I now have a computer that is almost useless for designing. Lucky me.

  • Audio (and other) problems noted with Keynote version 4.0.1

    Since installing Keynote 4 and the 4.0.1 update, I have noted the following situations and/or problems:
    1) When doing a "save-as" the filename is appended with the suffix ".key" but when I subsequently "save" this file, the suffix disappears. The file seems to open and operate OK nonetheless, but this puzzles and somewhat concerns me that someday Keynote may not recognize the file. This happens whenever I "save" a slideshow after I have made any changes to it.
    2) When playing back a "soundtrack," the audio "glitches" frequently at slide transitions: this occurs repeatedly on my G5 desktop system but not on my MacBook Pro-17. The "glitches" always seem to occur at the same places in the track - which, of course, is also at the same slide transitions. (This problem has spawned several similar questions and threads in this forum.)
    3) Related to #2 above, the "glitches" also interrupt or corrupt the "recording" of that soundtrack, so that the synchronization is off when the slideshow is played back.
    4) If I want to have an audio track play under a series of slides, the only way I have found to accomplish this is to create a separate slideshow with the audio track running as a "soundtrack" and "record" the Builds and Transitions in sync with the audio. If I want to incorporate several of these shows together, I can create a "master" slideshow and Hyperlink each segment to the next. HOWEVER...
    5) When I "record" a "soundtrack" and "synchronize" the Builds and Transitions within the slideshow, everything plays back properly in sync ONLY when the slideshow is played as a stand-alone presentation (i.e. a cold start from the desktop). If I initiate playback of the slideshow via a Hyperlink from another presentation, the soundtrack plays but NONE of the synchronization works at all.
    6) The only way I have found to have an audio track "fade-in" or "fade-out" is to use off-line editing software to record these fades prior to importing the tracks into Keynote. The "Start Audio" Build function is simply a hard "cut" in, and the end of the track is a hard "cut" out.
    These problems are consistent and repeatable facts. Whether they are "bugs" in the software or "design shortcomings" is uncertain. Nonethtless ...
    At the risk of offending the moderators of this forum, I feel compelled to comment that these problems render the audio operations of Keynote less than satisfactory and should be addressed as soon as possible with another update to this visually stunning but audio-challenged application.

    Well Ron S, I re-confirmed why I prefer not to look to tech support for support.
    It seems to me that support's main function is to deflect any critical comments and push the blame back to the user.
    Frankly, I have better things to do with my time and money than try to help a multi-billion dollar enterprise learn about itself.
    So, for the benefit of you and the nearly 400 who have followed this thread, I offer you my latest and probably last attempt to have Apple acknowledge in some small way that "Houston, we have a problem".
    I expect this reply will result in this thread being yanked as well, since I'm expressing negative thoughts about Apple's product and wishing they would do better, which is a non-technical gasp of utter frustration and disappointment. Note that "product" is singular, defining Keynote. My other Apple products serve me loyally and superbly, which is why my huge disappointment with Keynote.
    So here is my correspondence with Tech Support. I've removed names except mine.
    I think it speaks for itself. They have notes from my conversations with them that I have current Apple computers, including a MacBookPro, not an old PowerBook, nevertheless, they have told me that the problem is mine because the fabulous hyper-performing Keynote software is choking my poor old machine (paraphrased muchly).:
    Hi (support),
    That's disappointing news, especially since this test was done on 3 machines: an old G4 400, a 2.0G Dual G5 and an Intel core duo MacBookPro which yielded identical results.
    It is not a hardware issue.
    I do not accept a brush-off that it is my hardware that is causing Keynote to be problematic.
    I will assume that Apple is not interested in addressing these issues in public and that Keynote is substandard software that is in need of re-authoring.
    Sorry to be so blunt, but Apple has set this tone with Keynote, and used its considerable reputation as a leading a/v technology innovator to imply that Keynote will deliver the excellence we Mac users have come to expect.
    I have been a loyal mac user since the SE series and have enjoyed success with the machines and software offered by Apple, and depend on them for my livelihood. I'm currently using FC Studio6 and know that Apple is capable of maintaining its high standards.
    However, Keynote fails to do that, instead behaving like a product that was invented in a teenager's basement and is in beta. I realize that it's not designed as a FCP level product, but it fails at the basic tasks that you advertise it will complete.
    A version 4 product should work as advertised. Keynote certainly does not.
    I'm deeply saddened that Apple seems to have become an iPod entertainment company, interested mainly in profits from entertainment rather than serious useful technology.
    On 2007-Oct-19, at 10:14 AM, (tech support) wrote:
    Hello Sir,
    Unfortunately, this does look like it's mostly a case of some of the new Keynote features slowing down the performance on the PowerBook.
    At this point, there isn't much else we can do in the way of troubleshooting.
    If you are not satisfied with the performance on the PowerBook, using the previous version of Keynote is probably his best option at this point.
    We will continue to research this issue, but at this point it's unlikely I'll be able to find additional suggestions for improving performance, as it looks like it is is reproducible and limited to older models.
    On Oct 16, 2007, at 11:27 PM, Ron Tucker wrote:
    Hi (support),
    Thanks for your recent followup calls. I'm directing a video shoot so am a bit preoccupied.
    Here are the tests I mentioned.
    These are as simple as it gets, and I think highlights the synchronization problem with Keynote.
    Test 1 is straightforward, and demonstrates that a single unedited recorded audio track will maintain mouse click synchronization.
    Test 2 is the same file, but with audio modifications applied to each slide in succession.
    This demonstrates a dramatic synchronization slippage.
    The visuals occur before the click (and audio) markers. Keynote seems to be create delay in audio at each "record and replace" point. This accumulates as the audio is revised in successive slides.
    These tests demonstrate that there is a fundamental flaw in how Keynote handles audio in its most basic application.
    This does not address the slim toolset available, such as lack of insert capability and other basic audio tools, which is a separate design issue, and I suppose subject to "request for enhancement" feedback.
    I've reluctantly abandoned Keynote for my project work at present until these basic issues are addressed and it can be demonstrated that Keynote can successfully execute its feature set.
    <TuckerKeynoteTest.zip>
    Message was edited by: Ron Tucker1

  • TS1702 I am having a major problem with a Z2 app. I have written to the three times and received no response. Is there somewhere to report this and at least get my money back?

    When Z2 did their first 5. Update, a message popped up saying you had to do the update. After doing so, another pop-up said to remove and reload the game. In doing so, all my progress/ purchases disappeared. I only updated on my iPad, not my iPhone, so the iPhone app is till on the "you have to install the update to play" status. I've written to Z2 three times with no response. I would at least expect a refund of the $ I have spent on the game.

    You bought an app but it did not work properly on your device. You can easily report problems with your iTunes Store purchases via the iTunes Store. Here is how:
    Launch iTunes > Choose Store > Sign in.
    Store > View My Account > Purchase History then Click the Report a Problem button.
    Fill out the form explaining the problem you are having.
    Submit the problem report and wait for a response from Apple, they usually respond within 24 hours.
    Notes:
    When Apple emails your invoice, there will be a link on the invoice. You may also click the “Report Problem” link next to the app that you are having issues with to report your problems.
    Problems with in-app purchases or free apps, report them here:http://www.apple.com/support/itunes/ww/
    Before reporting your issue, make sure that you followed these troubleshooting steps explained here.
    <Link Edited by Host>

  • Having a major problem with LabVIEW programming

    I have been a faithful supporter of National Instruments hardware and software since 1997. During that time I have worked in academic laboratories using NIDAQ boards and LabVIEW for basic and applied biomedical research. To date, all my work has revolved around using the amazing analytical capabilities of LabVIEW for on- and off-line processing of analog input signals. I have not been involved in the programming of multifunction input/output vis.
    Now I am at a point where I am ready to construct and design experiments that require what I suspect are some very basic multi-function DAQ capabilities.
    But I am having very little success after several weeks of concerted efforts. Each attempt is partially successful, but fails to address the exact components I need.
    For example, my most urgent need is to read an analog input channel set, and stream it to disk. I would like one channel to trigger a single TTL-like pulse based on a known, period signal. But, I absolutely need an accurate, user adjustable (not necessarily on the fly) delay from when the trigger is received to when the pulse is delivered. What I have so far is a combination AI-CO vi that outputs a perfect CO-driven pulse. It is phase-locked to the periodic signal, but I cannot adjust the delay; the 'inital delay' input to the CO channel does not reset when the trigger is set to 'retriggerable.'
    I would like to stay with hardware timing, but I'm not sure I need to. If I go the software timing route, I don't think I have the skill/ability to make a stable vi.
    I have extensively searched, used, modified, and tried almost all of the DAQmx example vis, and extensively searched the NI website and discussion forum. This has been very successful, and I have learned from these, and incorporated them into my vis.
    Specifics of my set-up are: PCI 6023E, Labview 7.0 express (Full), Nidaq 7.3.
    My question is this: is there an enthusiast, or NI guru that would be interested in corresponding with me to help me solve some of these problems? I am a resident physician with only a limited amount of time to construct a successful project. I absolutely know LabVIEW can do what I want, but clearly I can't make happen without some help. For an expert what has taken me several weeks can probably be optimized in a very short while.
    I am available to correspond by phone or email. If anyone is interested, I can post or email code. Thank you very much, matt ([email protected]).

    Dear Matt,
    Thank you again for contacting National Instruments.
    You are correct to notice the initial delay will not reset. It is not meant for that purpose. So I've been working on a workaround for you.
    I believe you'll need to implement a new counter. This counter will be triggered by your current trigger, counts down for a certain amount of time, and when it reaches the terminal count, outputs a pulse you can use to trigger the other counter.
    There are a few difficulties in making this work. The count down must be reset every time you trigger. Also, the count down must only occur for a finite amount of time, otherwise multiple triggers will be fired when the count reaches the terminal count. Therefore, creating a pause trigger to activate the
    first counter is the way to go.
    Using a pause trigger, the count down will occur whenever the trigger is high, and will cease to execute when the trigger goes low. If we put this count down mechanism in a continuous while loop so that it is reset every time the pause trigger executes, you will be able to specify an exact delay (due to specifying how long to count down).
    Then, we just use the counter internal output - that is set high whenever the terminal count is reached - as our second trigger to execute what you already have.
    I've included an example. In this example, it shows the idea behind what we're trying to do, but it isn't right yet. There is a conflict in routing I still have find a workaround for. I think if we route one of the counter outputs externally, and then back in, it may work. Both parts of this program work separately (for example, the triggering off the counter output, that you also set up, works correctly, and the countdown triggered off a different d
    igital pause trigger, also works correctly).
    Let me know if you have any further questions or if this does not resolve your issue.
    Thanks again and have a great day!
    Chad AE
    Applications Engineer - National Instruments
    Attachments:
    retriggerable_analog_input_with_delay.vi ‏189 KB

  • I am having a major problem with iMessage-

    Since upgrading to 7.02 about half my texts don't go out even with a robust wireless or LTE signal. I have checked the 'send as SMS' but in some cases the messages will simply lock up and not go no matter what. Happens almost all the time now- and en=ven some texts that show as sent never arrive. Never an issue with IOS 6- they would go as SMS if iMessage didnt work but this seems broken on 7

    Try this:
    1) Settings
    2) General
    3) Reset
    4) Reset Network Settings
    This will reestablish the link for the cellular connection and the cellular data as well as the saved WiFi connections will be reset.
    Also Check this:
    1) Settings
    2) Messaging
    3) Ensure iMessage is turned on (sometimes it will turn itself off for some reason)
    4) Press on Send & Receive
    5) Ensure that all emails you want to be reached at as well as your phone number are listed there
    Remember that iMessage requires a data connection so with out either cellular data or WiFi it will not work.
    Finally after those two steps if it still does not work check for an update under Settings>General>Software Update and if you're up to date you could try a soft reset by holding down the power and home but together until the phone turns off and the Apple logo appears.

  • I am having a major problem with swapfiles. Can anyone help

    I have had a recurring issue for a few months now with accumulating swapfiles. My system drive fills with these files (65 x 1.9gb, the latest) slowing down the system due to finite disk space and causing some maintenence to be carried out. I have up to now been able to get rid of them using the finder to delete the actual files after making them visible in the finder(using IceClean by MacDentro). I can also use Omni disk sweeper to see the space on the drive as well as Disk Inventory X. Now I cannot delete the files. They have conglomerated into a unknown space that cannot be grabbed and trashed nor physically deleted through the finder.
    I am using an SSD 120gb drive with a system size count of 42gb. Bar 5gb the rest is this ether space that wont go away. I have a feeling that this is going to need to terminal commands witch I do not have at my disposal. Can any please help? This is driving me mad. I have reset the PRAM numerous times but this is too lightweight.
    Hard core terminal shyte, Bring it on. Please
    regards
    Ken

    The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. OWC has also tested RAM sizes above Apples official limit.
    Crucial
    Other World Computing

  • Having a major problem with iTunes!!

    My nan decided to use my laptop as I got a new one and it was better than hers. My old iTunes library was on there and she deleted all the files and the content on both the library and the laptop. She then logged into her apple ID account through itunes but none of her tracks are coming up. She has recently bought songs from her phone using the same iTunes account and it's not coming up on the library. I told her that she could have deleted all her files as well as mine and recent purchases might not even be on there. I don't exactly know what she's done and I think she's completly messed up her account :/
    If anyone could help me out with this and whether you need more detail about this as its a bit conplicated and confusing. She doesn't know what she's deleted; she just deleted everything from all the files to make the computer "brand new". She obviously has never heard of a factory reset.
    Thanks and I hope you can help!
    because i am posting this through my account - the apple product i have selected has nothing to do with this question
    she is using a windows laptop not a macbook

    Hi saff.tropical,
    Happy Holidays!  Congratulations on the purchase of your new computer. It's nice of you to pass on your old computer to your nan.  If I'm understanding your question, your nan has an older Windows notebook computer, your newer Windows notebook computer, and an iPhone -- is that right?
    The first thing I would suggest is that she create a new User Account on the notebook computer you just gave to her.   Next, if she doesn't have a backup of her iTunes music library from her old computer, she should create one on an external drive.
    Finally, she can copy the music from the external drive to her "new" computer.
    I'll include some resources below that will explain this in a little more detail.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
    http://support.apple.com/en-us/HT203206
    Create a new user account
    By creating a new user account, you can determine if the issue affects a specific Windows user account or all accounts. Follow the steps below to create a new user account in Windows Vista or Windows 7:
    Choose Start > Control Panel.
    Open "Add or remove user accounts." (If you're using the Classic view in Windows Vista, open "User Accounts," and then open "Manage another account.")
    Select "Create a new account" and follow the instructions to set up the account.
    Once you create the new account, choose Start > Log Off.
    Log in to the new user account.
    How to move your iTunes library to a new computer - Apple Support
    http://support.apple.com/en-us/HT4527
    Before you begin
    Make a new backup of your iTunes library or update your existing backup before you move it. Even if you already have a backup of your iTunes library, this step makes sure you capture any changes and makes the process easier.
    Migration
    If you want to move your library to a new Mac, you can migrate your data from another Mac or a PC. If you are replacing your PC, you might be able to use Windows Easy Transfer. This option might be slower than other options, but it's more thorough.
    Use an external drive
    If you're using this method on a Mac:
    From the Finder menu, choose Preferences.
    Make sure that the boxes next to "External disks" and "Hard disks" are enabled.
    Part 1: Install iTunes
    Download and install the latest version of iTunes.
    Part 2: Move any new content
    If you’ve used iTunes on your new computer, move your media to a new folder. This will keep anything you added to your new computer separate from your old library. These files can be added back to your library in Part 4.
    Move your iTunes Media folder (Mac)
    Move your iTunes Media folder (Windows)
    Part 3: Copy the iTunes backup from your old computer
    To copy all of your media files, including the library file that holds all your playlists and other settings, to your new computer:
    Locate the following folder on your new computer.
    Mac: Choose Go > Home from the Finder menu bar. Double click the Music folder.
    Windows XP: Navigate to \Documents and Settings\username\My Documents\My Music\.
    Windows Vista: Navigate to \Users\username\Music\iTunes.
    Windows 7 and Windows 8: Navigate to \Users\username\My Music\iTunes.
    Drag the iTunes folder in this location onto the desktop.
    Mac: From the Music folder to the Desktop:
    Windows: From the My Music folder to the Desktop:
    Locate the external drive on your new computer:
    Mac: On the desktop.
    Windows: In My Computer or Computer.
    Double-click the external drive icon to open it.
    Drag the iTunes folder from your external drive to the Music folder (Mac) or My Music Folder (Windows) on your new computer. The transfer might take a while if you have a lot of content.
    Mac: From the external drive to the Music folder:
    Windows: From the external drive to the Music library:
    Open iTunes.
    You've now moved all of your music, playlists, and other information—including play counts and ratings—from your old computer to your new one.
    Part 4 (optional): Add back new content
    Copy the iTunes Media folder you created in Part 2 into the "Automatically Add to iTunes" folder inside the iTunes Media folder you copied in Part 3. iTunes will automatically import the content.
    Use iTunes in the Cloud
    If you don’t have a backup of your iTunes library and your old computer is unavailable, you can download past purchases made with your Apple ID through iTunes in the Cloud.
    If you have multiple Apple IDs, you might find it easier to transfer purchases from a device after authorizing your new computer with your Apple ID.
    If you previously subscribed to iTunes Match, you can turn on iTunes Match once your new computer is authorized.
    After you transfer your library
    If you plan to stop using your old computer, deauthorize it by choosing Store > Deauthorize This Computer from the iTunes menu bar.
    If you used iTunes on your old computer to back up your iOS device, back up your devices on your new computer or manually transfer the backups from your old computer. Learn more about creating and deleting iPhone, iPad, or iPod touch backups in iTunes.
    If you used iCloud with your old computer for syncing, set up iCloud on your new computer.
    If you will continue to use your old computer, recreate your iTunes library. This prevents an iOS device from seeing the old computer as the new one because of the old library files.
    Last Modified: Nov 10, 2014
    I hope this information helps ....
    - Judy

  • Dear Mozilla Tech Guru, I am having a major problem with my MOZILLA FIREFOX. For the last several days it has been crashing every 5 minutes or less. WHY???

    It starts out as soon as FIREFOX is opened with stating that FIREFOX is "non-responsive." This will happen every 30 seconds or so. Then it will get jammed in the non-responsive state or just plain crash.
    Is there anyone that can help me???

    We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
    #Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
    #Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste those IDs into the "Post a Reply" box.
    ''' Note:''' If a recent Report ID does not start with '''bp-''' click on it to submit the report.
    (Please don't take a screenshot of your crashes, just copy and paste the IDs. The below image is just an example of what your Firefox screen should look like.)
    ;[[Image:aboutcrashesFx29|width=500]]
    Thank you for your help!
    More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.

  • Having a strange problem saving work in PS CS4.

    Hello,
    Recently, work that I've saved in PS CS4, has not been visible in Bridge, although it can be seen in Explorer >My Pictures.
    I don't have any idea why this happens, but I believe it's related to a disastrous proble I'm having today with InDesign CS4 where I've lost 4 days of work which had been saved in the usual manner.
    This is a really serious problem because I don't know if anything I save now  will be retrievable.
    Please help. thanks for your consideration,
    George Masi

    what do you mean by "not vissible"? the thumbnail doesn't display properly? the files can't be opened?

  • Having a major problem in windows...maybe someone can help?

    I normally wouldn't ask a windows question here, but I don't know where to turn for this one.
    My Macbook is less than a month old, base model. I'm running Windows XP home. I keep getting a windows stop error, and can't for the life of me figure out why. I'm getting stop error 000000ea, which is "THREADSTUCK_IN_DEVICEDRIVER". I've tried all the standard stuff, reinstalling programs, operating systems, drivers...you name it. I've tried the latest drivers...older drivers...you name it. This is my second Macbook, and while my first one had some major issues, it wasn't doing this, and I'm not doing anything different. It hasn't acted funny in Leopard, but the fact that it's frequently doing it in Windows...which I kind of need to run...is quite worrysome. I'm told it's either a hardware problem, or a driver problem. Specifically this happens when I'm playing games, but I'm not running anything that would really push the system's limits. It's done it while not running games, though, so I'm not ready to blame that. I upgraded the RAM to 2gb of Corsair RAM, and have since ran a good number of RAM tests to make sure there isn't a problem with one of the sticks. That's grasping at straws, though, just assuming that since video ram is shared that maybe it could be connected. This is a brand new machine, and I'm barely past my 2 week exhange period...I really hope this isn't a hardware problem.

    Hi,
    That Windows stop code indicates that video hardware is being initialized, but never achieves a state of readiness, thus the thread executing the driver code never returns to the calling process.
    I looked on www.techbible.com, and they suggest a problem with the hardware is a probable cause. Of course, it could be due to an incorrect driver too. See if you can start Windows in safe mode or VGA mode. The older MacBooks have GMA-950 video, while newer MacBooks have X3100 video. Be sure you're installing the right driver. Be sure the MacBook EFI and SMC code is up to date too.
    I'm running Vista on a GMA-950 MacBook, and Vista pretty much detected all the Mac hardware, except for the iSight camera. Since XP is older, it definitely needs the Boot Camp driver disc for many hardware drivers.
    Bill
    Bill

  • Problem Saving with ME_GUI_PO_CUST

    Hello All,
    i've implemented badi ME_GUI_PO_CUST with ME_PROCESS_PO_CUST for a screen exit on PO's Tx. (ME21N, ME22N and ME23N), a have a problem when i'm in Tx. ME22N and change one of the customers fields and then save the PO.. when i click save button the system popups a windows saying that "NO CHANGES HAS BEEN MADE" hence the saving routines doesn't execute and the customers fields stays unchanged..
    In the method TRANSPORT_FROM_DYNP in badi ME_GUI_PO_CUST theres a field named "re_changed" this is supposed to be filled with 'X' when a change on the dynpro has been made, despite i've filled this parameter with 'X' (as the example for the badi says) the system doesn't save customer fields.
    Any ideas why this is happening??...
    Thanks in Advance

    Hi,
    Set a Break point in all the methods of badi ME_GUI_PO_CUST and see its behavior.
    I think you have to make re_changed always 'X' .
    Edited by: candy on Jul 4, 2008 10:04 AM

  • Help! Severe problem saving with an action

    I loaded an action I created in CS3 into CS5 to save a photo in 4 different locations at different sizes. I am using a Mac with OS X 10.5. The action works perfectly in CS3 (it didn't get corrupted), however when I use it in CS5, it doesn't ask if I want to replace an older file with the same name. Instead it writes the file with the same name plus a space, and the word "copy".
    This will not work since these photos are used by other programs to automatically appear on my web pages.
    I tried to fix the problem by creating a new action in CS5, and when I created the action, I made sure that the file name was already in the 4 locations, so that a dialog box would come up, asking whether or not I wanted to replace the older file. Then I ran the new action, and it worked fine, except it didn't ask whether or not I wanted to replace the older file with the same name.
    The dialog box comes up in CS3 when I apply the action there, but not in CS5.
    So neither the old action, nor the new action will ask me if I want to replace the older file when I am in CS5.

    Yes this is probably yet another symptom of - the fact that they seem to have messed with a lot of what I am, in my uneducated way, calling the "Saving and Opening interface" between OSX and Photoshop CS5. The interaction between Photoshop and the Operating System in respect of saving files to disk, clearly just hasn't been set up properly. There are delays and all kind of weirdness going on - making work slower than equivalent tasks in CS4.
    These kind of mistakes should certainly be corrected with updates.

  • Hooked up my external drive and having some major problems??

    So I put my info from my pc onto my new external drive and then plugged it in to my mac (usb) It reads it just fine and I can pull info off it . . .
    But, I cannot put anything on it (claims the drive is "read only") and I cannot delete anything off of it (I don't have the right permissions)
    So what is the problem here?
    I don't recall how i formatted the drive but i did do it with my PC. I am wondering if mac can't write to fat32 or ntfs or something like that.
    Any thoughts are appreciated. I am using a hitachi drive in an ADS 835 enclosure.
    By the way, where and how do you set "permissions"?
    Kal

    Sorry for being too late. You will not have any permission problems after reformat.
    I hope it works now... I am using an external 60 GB VFAT drive without a problem with my ibook.
    haris

Maybe you are looking for