I am having a probelem with one website saying it is unsecure and untrusted.Other people are not getting same message.I have tried everything.

Hi there.
I am having constant problems when trying to connect to www.pretty green.com.When going to check out it is telling me that the site is unsognes,unsecure and doesn't use encryption.Other people are not seeing this message.
I have tried everything from reinstalling firefox to disabling ad ons etc.
The website also say it is secure.
Why will firefox not let me connect to it and why could it be showing as unsecure?
Than you.

Thank you for the updates. Since the server seems to be set up correctly, the '''sec_error_unknown_issuer''' could indicate that your connection to the server is being intercepted.
One common reason for this is that you use software like avast! 2015, Kaspersky, ESET, or BitDefender that has a feature of scanning your web traffic for threats. Firefox might not be set up to work with that software. If this is the case, when you view the site's certificate in the Add Exception dialog or in another browser, it usually will say it was issued by your security software provider.
Another possible reason is a hijacked connection or malware.
To try to sort this out, on the error page, do you see a section at the bottom which says "I understand the risks" with an Add Exception button? If so, click Add Exception and then click "View" to view the certificate. You don't need to actually add an exception, it's better that you don't, but this is a way to see the certificate.
If you check the "Issued by" section, what do you see there? I have attached what I see in Firefox 37 for comparison. Also, does the certificate path (chain of trust) on the Details tab look like the attached?
If you can't use Add Exception for this, you can click the padlock in the address bar in a different browser and use its certificate viewer.

Similar Messages

  • Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

    Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/

    Have you moved Pages from its installed location? Or just dragged a copy to your current system?
    It can't find some of its resources apparently.
    Peter

  • HT4623 My texts have stopped getting through to one of my contacts. I can phone him and I can receive his calls and messages. I am the only one of his contacts whose  texts are not getting through. We have both restarted our iphones but the problem contin

    My texts have stoipped getting through to one of my contacts. I can phone him and I can receive his calls and messages. I am the only one of his contacts whose  texts are not getting through. We have both restarted our iphones but the problem continues.

    Have you talked to your carrier (or your friend to his)?  Could be an issue at their end.

  • I need help with fp, i cannot get it to work. have tried everything

    i cannot get fp to work.  I have uninstalled and installed so many times.  I use IE9....it worked two months ago.

    thank you for your reply.  I am using Internet Exp. 9 and McAfee software.  It states it installs and when I open a video, receive message I need to upgrade.  I followed the directions for 32 bit vs 64 bit.   Adobe FP is under my programs????
    > Date: Thu, 8 Sep 2011 05:17:21 -0600
    From: [email protected]
    To: [email protected]
    Subject: I need help with fp, i cannot get it to work. have tried everything
    It won't work or just won't install?
    Which OS, browser(s), and anti-virus software are you using?
    If you're using the free Avira AntiVir(us) Personal software, then deactive the Webguard feature first before installing the Flash Player.
    >

  • Why is one slot saying 2.5gt/s and the other 5.0gt/s?

    Hello,
    I have a 2008 mac pro with 3.0 Ghz Harpertown processors. I thought these 2008 mac pros had two PCIe 2.0 slots, but yet according to my system profiler.. one slot is reporting at 5.0 and the other is 2.5 - what gives?
    ATI Radeon HD 4870:
    Name: ATY,MotmotParent
    Type: ATY,MotmotParent
    Driver Installed: No
    Bus: PCI
    Slot: Slot-1
    Vendor ID: 0x1002
    Device ID: 0xaa30
    Subsystem Vendor ID: 0x1682
    Subsystem ID: 0xaa30
    Revision ID: 0x0000
    Link Width: x16
    Link Speed: 2.5 GT/s
    ATI Radeon HD 2600:
    Name: ATY,Lamna
    Type: display
    Driver Installed: Yes
    Bus: PCI
    Slot: Slot-2
    Vendor ID: 0x1002
    Device ID: 0x9588
    Subsystem Vendor ID: 0x106b
    Subsystem ID: 0x00a6
    Revision ID: 0x0000
    Link Width: x16
    Link Speed: 5.0 GT/s
    Shouldn't both slot 1 and 2 be PCIe 2.0?? Why is one being reported as 1.1 and the other is being reported as 2.0? Is there something wrong with my PCIe slot?? I am saddened to hear this as I traded up my 2006 mac pro and now I see that i am not getting 2 x PCIe 2.0 slots as reported.

    DpArt,
    Are you sure that is what the problem is? When I get home from work tonite, I will try to swap the cards and see. Originally, my harpertown mac shipped with the ATI Radeon 2600 XT, a very mediocre card and its in slot 2 reporting 5.0, while the ATI Radeon 4870 is a 1GB slightly overclocked(applemacanix) flashed card and its in slot 1 reported as 2.5 which I am hoping that this is an oversight and not a mechanical failure or problem with my pcie slot.

  • How do I delete files  that  are no longer neede . I have tried everything that i know but no luck, when ever I write something in word and i,m finished with it  i click don't save , but when i open word ,guies what the file is still there , I have tried

    hello  I have tried everything to get rid of files  that I no longer need in word,  when I am finished with them  it asks do i want to save them i say no ,but when i open word again  the files are still in word ,I have tried to grag them to the trash can no luck, also went to finder to try there but no luck so what am I doing wrong it is very frustrating , as I no longer want these files kept in word  ????

    Which OS? Lion? If so, you're getting bit by the resume feature. Welcome to the iOS world of nonthinking, wherein the OS decides everything for you, whether or not that's what you want. Salient details described in http://www.apple.com/macosx/whats-new/features.html#resume   See these for steps to resolve: http://hints.macworld.com/article.php?story=20110918051930924 http://osxdaily.com/2011/08/01/turn-off-resume-per-app-in-mac-os-x-lion/ http://restoremenot.info/

  • When I select an address to a website from both email and/or other sites I frequently get the message, "Firefox can't establish a connection ... ."

    I have tried to discover a comon issue but the only thing I see is that it is getting worse. Web addresses that I used to be able to select will no longer connect. Various suggestions are given in the box like ... perhaps the website is busy, or ... there something missing from the address. None of the suggstions make sense and it is increasing in frequency, currently more than 50% of the time!

    Hello everyone.
    If this problem is just in Firefox and not in other browsers, it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.
    If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.
    If the problem also affects other browsers, it's either your network connection or some third party software (like a fireall/antivirus/security suite) that is causing the problem.

  • Trying to update from 4.2.6 iPhone 4 with iTunes 10.2.2.14 - getting error 3194. Have tried everything suggested in the forums. Nothing works. Desperate for ideas.

    For the past month I've been trying to update my iphone 4 (Verizon) from 4.2.6. I've got iTunes 10.2.2.14. My computer runs Windows XP.
    When I try to update, I get a 3194 error message. I've tried everything that's been suggested in the forums here to fix this problem, including even uninstalling my antivirus, not just disabling it. Nothing works. I've tried resolving it through Apple Care, to no avail. Can someone please help me resolve this? This is a stock phone, it has not been jailbroken or customized. If you've resolved this yourself successfully, please let me know what you did to fix things. I'm stuck!
    Thanks so much to anyone who can help with this intractable problem.

    Try updating the iPhone on another computer or in another user acconut.
    Apple has an article for specific error codes here -> http://support.apple.com/kb/TS3694
    This device is not eligible for the requested build: Also sometimes displayed as an error 3194. If you receive this error, update to the latest version of iTunes. If you do have the latest version of iTunes, this can occur when you attempt to restore using an older .ipsw file. Try restoring in a new user to ensure that iTunes downloads a new IPSW. 3rd party security software or router security settings can also cause this issue, to resolve please follow Troubleshooting security software issues. Downgrading to a previous version of iOS is not supported.
    WTH.

  • ALL websites coming up as an untrusted connection, on a networked system and the other computers are not experiencing this so not the actual connection

    My computer is suddenly not allowing any websites to connect. They all start with Untrusted Connection. It's EXTREMELY annoying. I just updated my Firefox version have restarted my computer twice. I have two other computers on my network in the office that do not have this problem, so I don't think it's my actual internet connection that's the problem - some setting must have been changed and I don't know what it was.

    Check the Date and Time on your system to be sure that they are correct.
    #If your system does not hold the Date/Time after being powered down and left off for a few minutes, the battery on your motherboard may need to be replaced. I replace mine about every 12 to 18 months to avoid such problems.
    #If the Date is incorrect on your system, it may fall outside of the "Issued On" and "Expires On" dates for the certificate.
    #To view the dates for the certificate(s) you should click on the Site Identity Button (colored icon on the left end of the Location/URL bar), then click "More Information", the Page Info window will open, click the Security Tab, then click View Certificate.
    *Set your Date/Time: http://www.computerhope.com/issues/ch000554.htm
    *Site Identity Button:
    **https://support.mozilla.com/en-US/kb/Site+Identity+Button
    **http://www.dria.org/wordpress/archives/2008/05/06/635/
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    **'''''Adobe Flash version 11 (aka Shockwave Flash) is scheduled to be released 09/21/2011'''''
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • I have 2 iPhone 4s currently.  On one of them the cameria icon shows in the botom left corner of the screen in the lessaging app but not on the other device.   How can I get it to display on the one that it does not show up?  I have tried everything I can

    I currently have 2 Iphone 4 s.  Both are unlocked vervion from Apple.  In the messaging app  the camera icon shows but it does not show on the other.  How can I get it to chow on both devices?  Thanks in advance for your help.
    Chet    [email protected]

    So after looking a bit closer i have noticed that when i have the phone plugged into the computer it shows the songs but when i dont have it plugged in and i go so the song icon on the bottom of the music menu screen it says i have no songs!

  • I have an unlocked iphone 3gs running ios 6.0 currently with straight talk. I was able to get all the functions working except mms.Do you think this issue will be resolved ? I really would like that option on my phone. I have tried everything.

    Can't get mms. to work have, tried everything I have found online.ST tells me it's Apples' problem Apple tells me it's STs' problem.Does anyone think this issue will be resolved ? My phone is an Apple unlocked 3gs running ios 6.0 on Straight Talk using atts' towers.

    I am having the same problem but cannot get anything but the actual phone to work.  I have a unlocked 3GS running 6.0 (what was I thinking?).  No data whatsoever, no texting, no visual voicemail.  I simply cannot access the APN settings.  I have tried sim swap, I have tried APN changers.  I have been on the phone with ST tech support for hours and hours.  I have tried to get the answers from a "genius".  I am stuck and looking at Android devices, but would really like to keep using the iphone with Straight Talk.

  • I have an older version of Firefox 3.6.6 I believe I am having an issue with one of the websites I sign into. Is there any way to update to the newest version

    I have an older version of Firefox 3.6.6 I believe I am having an issue with one of the websites I sign into. Is there any way to update to the newest version. Without losing all my bookmarks and saved pass words?

    Hello johngervais, the latest firefox version is 26.0 (today 4 Jan 2014).
    note that [https://support.mozilla.org/en-US/kb/firefox-no-longer-works-some-versions-windows-xp Firefox no longer works with some versions of Windows XP], if you have '''xp with sp2 and above''' you can update to latest version, see : [http://www.mozilla.org/en-US/firefox/26.0/system-requirements/ Firefox 26 System Requirements]
    if you are able to update to latest version then see : [https://support.mozilla.org/en-US/kb/common-questions-after-upgrading-firefox-36 Common questions after upgrading from Firefox 3.6]
    see also : [https://support.mozilla.org/en-US/kb/firefox-just-updated-why-it-asking-me-update-again Firefox just updated - why is it asking me to update again?]
    Don't worry you won't losing bookmarks and passwords after update firefox.
    thank you

  • Hi. I am having an issue with music on my Ipod. It would probably be easier to explain my specific issue: I have songs by Band of Horses from Cease to Begin. When viewing my albums through cover flow, it shows Cease To Begin as two separate albums, one wi

    Hi. I am having an issue with music on my IPod. It would probably be easier to explain my specific issue: I have songs by Band of Horses from Cease to Begin. When viewing my albums through cover flow, it shows Cease To Begin as two separate albums, one with only Islands on the Coast, and the other having Islands on the Coast with 3 other songs. If I delete the album with only one song from my IPod, it deletes the song from the other "album" as well. If I go to "All Songs" by Band of Horses, it only shows one Islands on the Coast, so it is not a duplicate issue. Also, in Itunes, it only shows one album. I just recently updated to iOS5 on my 4th Gen IPod Touch, if that helps.

        Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • Just installed Lion and the Magic TrackPad and I am having a problem with one click commands.  I have to hit the pad fairly hard with one finger to get it to accept the command.  Is this normal, is there another way that I am suppose to execute commands?

    Just installed Lion and the Magic TrackPad and I am having a problem with one click commands.  I have to hit the pad fairly hard with one finger to get it to accept the command.  Is this normal, is there another way that I am suppose to execute commands?

    No you just need to turn on Tap to Click. Go into System Preferences - Trackpad and click the Point to Click tab and select the first box which will say Tap to Click and you should be in business.

  • I am having the  problem . it says it shouldnt take more than 3 minutes then i get this message Could not activate iphone. i have taken the sim card out and put it back in even then its of no use. if any one out there can help us it would be very nice

    i am having the  problem in my 3gs iphone. it says it shouldnt take more than 3 minutes then i get this message Could not activate iphone.
    i have taken the sim card out and put it back in even then its of no use.
    if any one out there can help us it would be very nice of them. thank you for your time.

    I can not get to iPhone screen, so no way to get to Settings. That is the problem. When I connect phone to iTunes I get screen asking to insert SIN card. On the phone I'm getting Cinfigure screen asking Launguage , Country or Region, Wi-Fi, ( I can connect to my home wi-fi), and last screen "Activating your iPhone". After two minutes of waiting IM getting message: Your iPhone could not be activated because the activation server in temporary unavailable. try connecting to iTunes or try later or contat apple.com/support.
    Like I mention, I went to Bell as well Rogers store and tried to insert active SIM card with no results.
    Yes, my friend unlock the phone to use with Rogers but I don't know where

Maybe you are looking for

  • Audio will not play in timeline

    After editing my transcoded canon c100 .mts files in FCPX, suddenly the audio stops playing in the timeline. Project preferences are on "stereo", source media is set to "all", not just video. Clips will play fine in browser. The audio has come back a

  • JTable move row

    Hi, JTable offers the possibility to move columns via dnd. Is there a possibility to do the same with rows?

  • Best practice for Recruitment

    Hi Guys, My client is located in 500 places, all over the India. The operational head of each client place will recruit the employee as & when requires & send ESI, PF enrollment forms to the Head Office. Now they are asking me,  what SAP Best Practic

  • ActiveDirectory - SAP IDM integration in Identity Life cycle Management

    Hi Experts In our landscape SAP HCM is supposed to be  the  leading data source and SAP IDM takes identity information from SAP HCM.  From SAP IDM it will provision into Active directory and other third party systems, Sap systems. Here are the questi

  • Bhold-flowing user's Manager attribute to BHOLD core

    Hi, I have a requirement to flow all user's manager value into bhold core.This is for setting up attribute based attestation.The problem with manager is "it is a reference type attribute in both AD and metaverse", so i need to create a reference attr