I am having a problem dowloading a sample of a book on ibooks store

I am able to access the store and my library but when i tap on a book to sample nothing happens.

Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Similar Messages

I am having sound issues with Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmated. I can hear samples of audio books in the store section. Any ideas?

I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section. Any ideas? I have reset Safari. Website works fine on Firefox.

I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section. Any ideas? I have reset Safari. Website works fine on Firefox.

TS4068 why can't I open a sample of a book in ibooks on my Mac?

I downloaded a sample of a book from the iTunes store, but when I try to open in in iTunes, it wouldn't load. However, I can open in on my iPhone library without any problem. What am I doing wrong?

iBooks, as it says on each book page, can be read only on an iOS device. Apple has not yet provided a reader app for Mac OS X or Windows.
Regards.

I have windows on my mac and lost audio and can't connect to the internet.anyone else having this problem? Or have it installed at the apple store?

I have windows on my mac which was installed at the apple store. I have lost audio and cannot connect to the internet on the windows side. Mac is ok. apple genius and tech support can't help me and say I need to go to microsoft. In fact the tech support was unaware that windows was loaded on by the apple retail store. Has anyone else had this problem?I recently bought fusion thinking this would help bridge between the two( as told by the genius bar) but it didn't help.Any ideas?

hey mate i used to have the same problem and i got computers maintenance guys out to fix it in the end and all it was, was the router.. got a new one and it was all good after that! i think some routers just arent compatible for some reason or another.

Am having a problem locating autocad lt 2012 edition on mac app store. anyone had any success with this. all the websites state that it has been launched on mac app store last week

has anyone been able to purchase the autocad 2012 lt edition that apparently is available on mac app store. dont seem to be able to find it?

This article was posted on August 16th: http://blogs.wsj.com/digits/2011/08/16/autodesk-adopts-apple-app-store-for-mac-s oftware/
Perhaps this coming Tuesday.

Anyone else having problems downloading samples from the iBooks store?

A favorite author of mine tweeted to his fans that a free 80-page sample of his next book was available on the iBooks store: https://t.co/7ZfhpWYcfE
But when I get to the store and click 'Get Sample', nothing happens.
I can't seem to find any other discussion on this in the forums (perhaps I wasn't looking hard enough). Anyone else have this problem? Any ways around it? I don't get an error message, but my mouse pointer seems to "hang" for a second after clicking the button, as if something's about to happen. Nothing does.

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.

Anyone having Laging problems tonight with itunes store?

Anyone having Laging problems tonight with itunes store,I seem to be having some major laging problems,anmd when I click on a song to sample it needs to search URL,,allmost all the time as of tonight? anyone can or have any awnsers thanks..

its making me mad too
arghh i want new music =0

Problem with Color Sampler Points

I'm using PSCS4 on a Mac Pro, and recently upgraded to Snow Leopard 10.6.3 from Leopard 10.5.8.
I regularly use color sampler points in Photoshop when adjusting curves. I seem to be having problems getting a sampler point to show up in the info palette when shift-clicking with the eye-dropper tool, or directly using the color sampler tool. I've also tried shift-clicking from within the Threshold command, but the points I click just don't seem to take a sample and show up. I never had this problem before. I'm bringing RAW, sRGB and ARGB digital images into PS from Bridge, and have tried 8 and 16 bit.
After trying for awhile, sometimes it just suddenly starts working again. For instance, I was writing this post after not being able to get PS to take samples. Then I went back and forth between the internet and PS, and it started working all of a sudden. Very odd.
Anyone else seeing this? Am I doing something wrong? Any workarounds?
Thanks, Lou

Thanks, Mark. You may be right, and I will try it.
I have my workspace setup saved, but I presume it is lumped in with all the other preferences. Is there a way to "Export" my saved workspace setup from Photoshop, so after I trash my preferences, I can reimport at least my workspace? I didn't see the ability to do that, but it may be hiding somewhere. I like my current dual monitor setup and prefer not to have to 'redo' it from scratch.
Thanks,
Lou

Problem with intermittent sampling and writing to file(s)

I am describing the functionality that I am trying to achieve via the attached VI.
The VI opens with a sequence structure. In the first sequence step analog output voltages for 2 AO channels are set
The next sequence step consists of analog data acquisition
Custom linear scales for 3 input channels are specified, to convert input ‘volts’ to respective physical quantity being measured
The input voltage signal is with +/- 10V but the physical quantity (forces) are greater than 10N
The headers for the data files are created as strings
The acquisition is set for finite sample acquisition
The VI is set for periodic acquisition, wherein the data is acquired for specific time period given by ‘Sampling on’ and then ignored for time period specified by ‘Interval off’.
The VI is set to write instantaneous data to multiple files. Each time the While loop is executed the instantaneous data, number of samples read (sampling rate x Sampling on time), is written to a ‘.dat’ file.
Statistical operations on data collected for each While loop execution is performed. These values (average & st. dev) are then written to another file ‘*.sum’ with respective headers
The headers for the ‘*.sum’ file are written only for the first execution of the While loop
The VI is designed to run for a specific duration after which the execution of While loop is stopped
Certain safety features are incorporated to terminate the execution of the While loop if the ratio of measured quantities exceeds a preset limit.
In the last sequence the analog outputs are set to zero
I am having following problems with the execution of the VI:
The VI does not write instantaneous data to data files (*.dat)
The VI writes the averaged data for *.sum file for only the first execution of the While loop.
It also truncates the values to around 10.5 written in *.sum file. While implies that the custom scale is not working as intended.
I would really appreciate if you would tell me how to fix these bugs with the VI. I would really appreciate your help.
Have a happy holiday season.
Thanks,
Dinesh
Attachments:
VLBT_Sequence_AnalogIP_2.vi ‏437 KB

Lynn, he may actually not be to blame for the diagram size. It does not change if you "clean" it, which leads me to believe that this is what he did. But a very entertaining diagram it is. A true case study :-)
Now, the strange thing is that stuff like this remains in it:
As Lynn said, the reason why the file is updated only once is that there must be an error after the first acquisition completes. The only way to figure out which one it is (in order to avoid or correct it) is to debug your code in situ (using a probe on the error wires). It might be because you try to restart your acquisition within the loop (you probably should stop it first if you really want to restart it anyhow). I would put the start out of the while loop and try this way. The error might occur elsewhere though or for another reason...
Since you recreate your dat file at each iteration, the second giving you nothing because of an (unknown) error, will essentially erase your first successful iteration.
I don't understand the truncation statement.

Since downloading Mavericks last week my Mac is very slow. Anyone else having this problem? Any suggestion as to speeding things up?

Since dowloading Mavericks last week my Mac is very slow. Anyone else having this problem? any suggestions as to what to do to speed things up?

It will help people help you better if you post your iMac variant and Mac OSX version. Please do "About this Mac" from your Apple menu and, in the resulting window, click the "More Info" button. That will give this window:
The model is in the line I've indicated with the red arrow. Please also post the results for "Memory" and "Processor."
DO NOT post the serial number, however.

Having a problem with eBooks in my iTunes library.

As the title says, I'm having some problems with the iTunes library not reflecting what's actually on the disk.
I add the ebook and it seems to add ok. The file gets consolidated into /mymusic/books under the author correctly, but the book is missing from the library. The book is in ePub format, and seems to have the right file extension and shows up as a file of "ePub" type in windows explorer.
Any ideas? Is there a way to re-build the library or a portion of it?

Hi tony paine,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iCloud: Keeping the Junk folder consistent between iCloud Mail and OS X Mail
http://support.apple.com/kb/HT4911
Cheers,
- Judy

Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

I am having to routinely reset the Ipad 2 after the install of IS05 becuse of lock ups. Is anyone else having this problem?

I pad 2 is locking up on a regular basis. Is any one else having this problem. Also Safari doesnt seem to work as well as the old version.

Similar problem running a 27" iMac only it occurs in Excel and inDesign. Hit the cell with the curser and the worksheet moves over to the right 7 or 8 cells away. Have to curser back to the cell quite frequently. This issue make the machine unusable when working with those two aps. Today I did the ultimate and completely reloaded Yosemite and the problem is still there.

My iphone 4s voice dictation for text messages is not consistently working. Sometimes it works, other times after the dictation it just gives me a blank space. Anyone else having this problem?

My iphone 4s voice dictiation for text messages is not consistently working. I've had the phone since Thanksgiving and it always worked perfectly, but the last few weeks it's been hit or miss. Sometimes it works, sometimes it doesn't. Anyone else having this problem? I tried the hard reset but that hasn't fixed it.

I have the same problem since updating to IOS 8.3. Any app to which I want to send a new link via IMessage does not allow me to select a contact to send the IMessage to. Using a pre-existing thread does not have same problem.

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no ma

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no matter what work I have done, inc cropping they all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to yesterday, when this first started.
I recently changed computer to 64bit from 32bit, not sure if this causing the problem or not. Any help would be appreciated.

Robert,
Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals? Sorry, I can't quite follow you.
Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
Thanks.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I am having a problem dowloading a sample of a book on ibooks store

Similar Messages

Maybe you are looking for