I am having a problem sending photos by way of the share facility in iPhoto.  I have looked in accounts and i cloud is not listed as an option.  I removed MobileMe and reloaded it and that enabled me to send the photos but then the email didn't arrive

When I first tried to email photos from the share facility of iPhoto 9.2.3 I received a message something along the lines of server didn't recognise your id and password.  Read other peoples posts that suggested removing and reloading icloud in the iPhone account section.  No icloud in my accounts  just email and mobile me so I removed and reloaded mobile me.  After that I sent a test email to myself.  It arrived eventually but disappeared the instant I tried to open it.  Shut down my Macbook completely and then switched it on again with exactly the same results.  I am using OS X 10.7.4.  Can anyone tell me how to get icloud as an option for my iPhoto emails?  I use icloud for my normal emails.

I've resolved my problem now.  It wasn't iphoto: preferences:@ that I needed but iphoto:preferences:general where there is the option to choose email for sending photos.  Can't believe I missed that before.

Similar Messages

  • Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash, if possible.
    Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) 2>&- | wc -l | pbcopy
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
    The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • IPhoto opens but then the spinning rainbow wheel appears and I can't do anything. I have opend iPhoto with the Option key pressed and rebuilt the library and it still happens.  I want to at least access my photos and copy them to an external drive.

    iPhoto opens but then the spinning rainbow wheel appears and I can't do anything. I have opend iPhoto with the Option key pressed and rebuilt the library and it still happens.  I want to at least access my photos and copy them to an external drive. Anyone have ideas on how to get to them?

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    OT

  • I just upgraded my iphone 4s to ios 7 and now it will not connect to my hotel wifi, it asks to accept cookies and ive done that and it keeps asking that.

    I just upgraded my iphone 4s to ios 7 and now it will not connect to my hotel wifi, it asks to accept cookies and ive done that and it keeps asking that.

    Hi JokerzLaff,
    If you are having issues with your WiFi connection after updating to iOS7, you may find the following article helpful:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Regards,
    - Brenden

  • TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library  it says There was an error opening the database for the

    Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library  it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

    Try starting Aperture with the command and option keys held down.  You'll get 3 options.
    Try each, starting at the top, in order, checking after each to see if it fixes the issue.

  • When I plug my iPhone in to my computer, iTunes doesn't recognize it as a device.  I have deleted and re-downloaded iTunes twice which seems to fix the problem temporarily but then the next time, the device is not recognized.

    when I plug my iPhone in to my computer, iTunes doesn't recognize it as a device.  I have deleted and re-downloaded iTunes twice which seems to fix the problem temporarily but then the next time I plug my phone in, the device is not recognized.

    What happens if you go to iTunes > File > Devices, do you get the option to Sync iPhone?
    You could try a reinstall of iTunes. OS X Yosemite: Reinstall apps that came with your Mac

  • I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

    I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

    jpqcampos wrote:
    This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
    You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
    And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
    Here are the two tables, Data on the left and Summary on the right. Notes below.
    The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
    Data table:
    D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
    D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
    D3 (and filled down the rest of column D):   =AND(OR(B2,C2),NOT(OR(B3,C3)))
    The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
    Summary table:
    Column A contains labels for the age ranges to be counted.
    Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
    C2 (and filled right to column D, then both filled down to row 5):
        =COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
    Two changes from the previous example:
    COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
    The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
    See note below regarding my earlier formula.
    When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
    Close the reorganize pane, and the 'data entry form' is ready to use.
    To use, enter the age first, then check one of the boxes.
    As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
    Regards,
    Barry
    Note regarding formula in my earlier post:
    The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
    In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
    Fill down to E8.
    Ignore the instructions (in that post) following "Fill down to E8."
    B

  • HT204053 Is there a limit to the number of devices I can have on one account.  I have all two of my kids ipods, plus, mine, an ipad, and my iphone, and need to add one more.  I do this so that I have control over and can see what they are downloading.

    Is there a limit to the number of devices I can have on one account.  I have been putting my kids' ipods on my account so that I can manage their downloads, and control it.  Then I just create playlists for them specifically.  Now, adding another one for my youngest, but have no idea if there are limits. 

    Well the part about putting songs in the "iTUnes Music" folder I only brought up because it seemed you liked things very organized. You could use iTunes to so all the organizeing. Plus once you add something to the iTUnes library, if you change ANYTHING about it in windows explorer, like its name, change the name of the folder its in or move it to another folder, iTUnes "Looses Track" of it. Its not like other programs that "Watch" files and folders for changes outside its "iTUnes Music" folder
    But to have iTUnes auto search, you have to delete a hidden pref file. After doing this, when you open iTUnes again it will throw up a setup wizard, just like its the first time ever installing it. Its in this wizard where you get your ONLY chance to have iTUnes auto search and add files from the system. Just goto the link below and follow Scott P's steps
    http://discussions.apple.com/message.jspa?messageID=607357
    Also since your new to the ipod, you my want to check out the "iPod 101" section so you can learn the ropes of everything
    http://www.apple.com/support/ipod101/

  • Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is

    Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is plugged into itunes. Can't even restore it. I get Error 1415?

    Hi clarity,
    Welcome to Apple Support Communities.
    You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814
    Best,
    Jeremy

  • I can't reload photoshop elements 7 everything seems to go ok installing but then suddenly it says rolling back and try installing later ???

    I can't reload photoshop elements 7 everything seems to go ok installing but then suddenly it says rolling back and try installing later ???

    try resetting your phone by turning it off and back on again. Also, the server may still be slammed from all the activity, so it may take a little with to connect.

  • I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up

    I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

    I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

  • Why won't this song play even after I authorized the computer? It says that I need to authorize the computer, then I enter my username and password and it says the computer is already authorized. But then the song still won't play. What do I do?

    Why won't this song play even after I authorized the computer? It says that I need to authorize the computer, then I enter my username and password and it says the computer is already authorized. But then the song still won't play. What do I do?

    Use the Apple ID support -> http://www.apple.com/support/appleid/ - click through the contact information and select the iTunes, etc., hot button. You can have Apple call you or email them.
    Clinton

  • When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login. What should I do?

    I was having some problems with my mac, safari and itunes was freezing alot. I have to force shutdown and when I tried to start up again i get to the login page, type in my password and it starts to load, but then the screen turns blue for a few seconds and it goes back to the log in screen. What should I do?
    Please Help!!

    Somewhat similar problem:
    Put in the password, hit enter, the screen goes blue for half a second, then goes back to login screen and carries on logging in as usual.  Drives me mad.  It doesn't happen with a fresh Lion installation, nor if booted into safe mode.  On the machine in question it also happens to new user accounts.
    I've removed all login items, including Startup Items and Launch Demons (pun intended) and Agents, I've compared system login plists with a fresh Lion installation - can't see differences.  I've removed Little Snitch and PeerGuardian (no more third party kexts).
    @Carolyn: I've done disk maintenance with DiskUtility and fsck and even DiskWarrior, cleaned caches, etc. etc.
    Any ideas would be gratefully received.
    Sorry for trying to hijack the thread (as it's not about Lion), but it seemed dead anyway.

  • The screen on my macbook has malfunction. When I change the brightness to zero and return to the first level of brightness it works briefly but then the screen starts to flicker brightness and quickly extinguished.

    The screen on my macbook has malfunction. When I change the brightness to zero and return to the first level of brightness it works briefly but then the screen starts to flicker brightness and quickly extinguished. It seems to be a bad contact, it would not be normal for a quality product that should have, he has less than two years of use. Not because of the bad use or crash. Someone with the same problem or can help me? It's really a contact problem? I've done all the procedures recommended by the online support. Thanks.

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • Selection boxes in Barracuda Anti Spam and Virus Firewall do not appear in 7.0. They appeared in previous versions, and in IE.

    Selection boxes in Barracuda Anti Spam and Virus Firewall do not appear in 7.0. They appeared in previous versions, and in IE.

    FIXED!
    I reverted back to 3.6.23 and all works fine. From everything I can tell; number of problems submitted, breadth of issues, no access to versions 4, 5, 6 (rapid version turnover with no support), and now beta being released for 8, it seems FF is having the user base do all it's alpha/beta testing without consent. Being in product marketing myself, I probably would have lost a significant percentage of my customer base by now. When FF begins to support a new mainstream release, then I'll be interested again.

Maybe you are looking for