I am having a problem to install to OS X Mavericks

Hello,
I am having a problem to install to OS X Mavericks. Trying to install and it noe happing. Help me on this matter.
Thanks
NIC

Welcome to Apple Discussions
Help us help you. The more complete the description of your problem (what MBA you're using - there are many versions going back to '08, a full compete description, the text or a screen shot of any error messages) the more assistance we can provide, and, the sooner we can provide it..
"Trying to install and it noe happing. " doesn't give us much of a starting point.
Will it not download?
Will it not install? Are there any error messages?
It is a very large download - over wireless only it takes a very long time.

Similar Messages

  • Guys, good evenning! What is the most recently (or the best) iOS for the iphone 3G? Nowadays, i am using the 4.2.1 but i am having some problems to install apps from Apple Store because this iOS is not compatible with the apps. Thank You...

    Guys, good evening!
    What is the most recently (or the best) iOS for the iphone 3G?
    Nowadays, I'm using the 4.2.1, but I'm having some problems to install apps from Apple Store because this iOS is not compatible with the apps.
    Thank you very much...

    Thank You Niel!
    And if I install another version (eg 4.3), can I damage my iphone?
    This is the version required by the Apple Store when I try to install apps.
    For you understand better my problem, I'm not able to install simple apps like facebook and skype
    What do you advise me to do?
    Best regards,
    Jocemar

  • I am having mail problems after installing Mountain Lion

    The mail doesn't work properly and the cursor freezes up and I get the color wheel whenever I start typing and have to wait for it to catch up.  All this started after downloading the wonderful upgrade Mountain Lion.  Is there a way to go back.  I was happier then.

    Graciegirl,
    I habve exactly the same problem with my wireless Deskjet F4500. I have done the following with no results:
    Installed Mountain Lion update
    Printer cannot communicate wirelessly (blue light blinks)
    Uninstalled HP Software
    Reinstalled software using usb cable, otherwise printer not recognized.
    Software successfully installed
    Ran software update
    New HP Software installed 2.9
    Printer still connected with usb cable and is recognized in Printer preferences as idle
    Box checked to configure device for wireless network
    Directed to use usb cable to configure (it already is)
    clicked continue
    Hp Installer determines that computer is connected to a wireless network
    correct net name indicated
    wep password entered
    looking for network
    Get the following message:
    Device not connected
    To configure the network settings of the selected device, please connect it temporarily via usb. The device can be disconnected from the usb once the network setting are transferred
    click okay, but cannot continue because printer is already connected by usb.
    Ran wireless net test by pressing scan button
    No filtering FAILS
    I can print using USB cable
    Can anybody out there help Graciegirl and I?

  • Having syncing problems after installing iPhone OS 2.0 for the iPod Touch

    Ok, after finally installing the software on my iPod Touch 2nd Gen, I tried to sync it, and it only syncs my pix and apps. It will not sync my music nor videos. It read " an unknown error has occured. (error 13019).
    Has anyone else expericned this problem. It's starting to make me regret buying the upgrad software, specially since the iPhone and iTouch is basiclly the same thing. Donnt get me wrong it has the other features but I cant do the things that I orgianlly bought the Touch for.

    Yes, I didnt unclick anything and and everything stayed the same since before the upgrade. I tried everything. And still nothing works!!!!

  • Having a problem when install Virtual pc

    Hi
    I installed virtual pc at my MBA, but, when i tried to launch it, a message showed up, said:
    *The application Virtual pc quit unexpectly*
    *Mac OS X and other applications are not affected*
    *Click Relaunch to launch the application again. Click Report to see more details or send a report to Apple.*
    Clicked Relaunch, it didn't help, similar message showed up again
    Do anyone experince similar problem?
    And How can i solve it?
    Thanks a lot

    Hi
    Virtual PC will not run on Intel Macs, including the Macbook Air. You will need to use either the built-in Boot Camp, or one of the third-party solutions of Parallels Desktop for Mac or VMWare Fusion (all solutions require a full retail copy of Windows). You may also be able to use Crossover (does not require Windows) to run certain Windows apps.
    Matt

  • Problems re-installing Adobe Photoshop Elements 11

    Hello, I am having a problem re-installing my photoshop as you read above.
    I installed it on this computer in 2012. It worked very well, and I had no problems with it. Today I reset my computer, and it removed my photoshop, which I knew it was going get removed.
    So I put the disk in, and now nothing pops up but a screen that says install photos/videos, like the screen you get when you put in a USB memory from a camera. I already tried install.app, and nothing came up but a file folder that says Contents. Please help me with this issue, thank you. My laptop is Toshiba.

    Wrong forum, Oceawolf.  We don't do Elements here.
    You want the Elements forum here:
    Community: Photoshop Elements | Adobe Community

  • I have a problem when installing the Developer Suite

    Hello,
    I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.
    Please help me with this :(

    Hi user;
    I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.What is your OS? If you are linux-unix level you are making installation wiht same user of Oracle Db11g? Did you try to create new Oracle_home and set it before start installation?
    Regard
    Helios

  • Problem to install Visual Composer.

    Hi,
    I am having some problems to install this versions: NWVC60_0-20000504
    About my landscape:
    I am using two boxes machines: one of them where is installed MSSQL 2000 SP3, and the other one E.P 6.0 SP2 Patch 4 and IIS 5.0.
    I read Installation Guide 1.2 during the step 3.4 Installing Visual Composer Storyboard: I run setup.exe the system asked me:
    HOST NAME:
    DEFAULT TCP/IP PORT:
    AND DBNAME
    After entering of this paremeters appear a message saying:
    "Visual Composer Installation requires SQL200 SERVER indicate appropiate server"
    This is MSQLServer 2000 and I have installed SP3 (I don't understand this message).
    In order to proof this connection I have configured an ODBC connection and it worked fine. (I use the same database, user and password).
    Could you tell me what I am doing wrong ?
    Here, I have a doubt:
    Must I manualy create this D.B or the system create it ?  
    Thanks a lot,
    Patricio Garcia.

    Hi,
    You don't have to manually create the database, it is done by the installer. But the installer stops on your case when testing the DB version. Try running the following SQL phrase used by the installer:
    use master ;declare @dbversion varchar(150) ;select @dbversion = substring(@@version, 23,5);print '[Server version]'print  @dbversion
    It should result with the following:
    [Server version]
    2000
    It also writes it into a temp file in a temp dir which might have failed for some reason (full administrative rights when installing?).
    Regards,
    Yaniv.

  • Problem in installing any app

    Why I'm always having a problem in installing any app? They keep telling me retry on all apps while installing ...

    1. Settings>General>Date and Time>Set Automatically>On
    2. Make sure Time Zone is correct
    3. Reset iPad. Hold the Sleep and Home button down until you see the Apple Logo

  • Having a problem with my ipad... I tried to install ios and the ipad has frozen

    I am having a problem with my Ipad air.  tried to install ios and my ipad has frozen

    Click here and follow the instructions.
    (124611)

  • TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4)  I have done everything the troubleshooting article has said and it is still not working properly.

    'm having a problem with downloading and installing the new version of itunes for windows (11.1.4)  I have done everything the troubleshooting article has said and it is still not working properly.  I have even done a repair to see if that works and it has not.  Has anyone else found a new way to get it working?

    Try Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I am having a problem with Windows Fusion installed on a MacBook.

    I am having a problem with Windows Fusion installed on a MacBook OS 10.  When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
    I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
    I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
    Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
    Any help would be greatly appreciated.
    Thank you very much.

    HartEJ wrote:
    ...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
    If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them.

  • HT4623 After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source.  Anyone else having this problem, please advise on how to fix.

    After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source.  Anyone else having this problem, please advise on how to fix.

    IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

    hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
    iv unistalled flash, iv checked plug ins it just wont work,

    It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
    (If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
    * Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here:  http://kb2.adobe.com/cps/142/tn_14266.html  and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here:  http://kb2.adobe.com/cps/838/cpsid_83808.html
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
    After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
    When you have installed the latest version of Flash, relaunch Safari and test.
    If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
    click Check Now. Quit and relaunch your browser.
    You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
    Use the FULL installer for 12.0.0.44:  Flash Player 12 (Mac OS X)
    And the instructons are here: Snow Leopard Clean Install.pdf
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
    Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

  • Good Morning.  I'm having a problem using both my Photoshop elements and premiere programs.  I've installed the programs, redeemed my code and entered the serial numbers, and created the adobe log-in.  I am able to open up the organizer without problems,

    Good Morning.  I'm having a problem using both my Photoshop elements and premiere programs.  I've installed the programs, redeemed my code and entered the serial numbers, and created the adobe log-in.  I am able to open up the organizer without problems, but when I try to open up the photo editor (either by trying to open up the program from the main menu, or right-clicking on a photo in the organizer to edit in elements), the program asks me to sign in to adobe (which I can do and it doesn't give an an "incorrect password" or log-in ID error) then accept the terms and conditions.  When I click to accept the terms and conditions, nothing happens and the editor fails to open.  Everytime I click on the program, I get this same "loop" of signing in and accepting T&C's, but the program fails to open.  Any advice?

      Premiere Elements 10 is now 64 bit, but not PSE10.
    Take a look at your scratch disk set-up and if you have a spare volume, allocate that first before the C drive. Elements use scratch disks when it gets low on RAM.
    Click image to enlarge
    Turn off face recognition and the auto-analyzer to improve performance.
    When editing photos or videos check the task manager to see what background processes may be running and end them temporarily if not needed.

Maybe you are looking for