I am having a problem while upgrading my iTunes to 10.5.
I am having a problem while upgrading my iTunes to 10.5. I've been trying to use the 64-bit installer and have tried disabling my anti-virus software. In the end of the installing process, this error comes up:
Could not open thekey: HKEY_CLASSES_ROOT\Installer\Products\F65865963B6B0EB4ABB0F894B53E0233\SourceLis t\Media
I`ve already tried to change the permissions options in ``regedit``, but when I try to change them , it still complains about not having access to the key, it says ``You do not have permission to view the current permission settings for Media, but you can make permission changes``I click in ``Ok`` and when I tried to change the options, another error comes up:
``Unable to save permission changes on Media. Access is denied.``
Can anybody help?
Try drifting up to the SourceList key, mariana. If you are able to change permissions there, try to make the changes described in Marconato's post (except that you're doing it in SourceList rather than Media):
Re: Could not open key: UNKNOWN\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceList\Media. Verify that you have sufficient access to that key, or contact your support personnel.
(If we can't get to the permissions on the key directly, it seems that sometimes going up one level and using the "inherit from parent" setting can get the permissions in.)
Similar Messages
-
I'm having a problem while recording a video
'm having a problem while recording a video
When the memory card and the highest quality ..
Stop and is working
I recorded video works normally on the memory card.Nokia C5-00 5MP
-
Problems after upgrading to iTunes version 6
Hello,
I've been going through the threads a lot since I have had problems after upgrading to iTunes v. 6. It looks like a lot of people have had the same issues, and I have tried some things that were recommended. After I upgraded, iTunes would not open. I tried:
1. deleting sidb file
2. doing the msconfig thing suggested in discussion boards
3. going into safe mode and deleting 4 and 6 letter weird files in DOS - I found 3 that I deleted
iTunes worked after this -- then I bought a song and it said my computer was not authorized, after I authorized computer (that never happened before), iTunes worked for about 15 more minutes and then closed down abruptly. I haven't been able to open it since.
I also downloaded Spybot search & destroy and that did not find anything. I am using McAfee, and have scanned for viruses with McAfee and AdAware.
Now, when I restart my computer, a bunch of windows pop up with Chinese/Japanese looking characters and say that device (I think) was not found. I seem to be able to use everything except iTunes and Quicktime. When I open the Task Manager, iPodService.exe and iTunesHelper.exe and qttask.exe are there, but when I click on Quicktime or iTunes the file flashes in Task Manager and then disappears.
I'm not sure where to go from here.
Any help would be apppreciated -- I'd like to be able to open iTunes!Hello,
I used Nickroo's post:
I was able to get iTunes launched (with the help of Tech Support) in a very unsafe environment. I owe it to those who may need this after me. It will get you going, but you will be extremely vulnerable to internet virus assaults. Please do not use this approach, until you have exhausted every other available solution for your issue in the KB.
There are three Steps 1) Uninstall 2) Disble and 3) Reinstall.
UNISTALL Uninstall iTunes using Windows utility Add Remove Program available in Control Panel.
DISABLE Disable all third party System Services and Startup Items using using MSCONFIG utility as described in Service Document http://docs.info.apple.com/article.html?artnum=302538
RE-INSTALL Re-install iTunes6 + QT7. Launch it under the Selective Startup Option.
It worked ! You realize among other things at this point you have your Antivirus and Firewall disabled. When I started my computer in the Normal Startup Option, iTunes fails to work again. So I have ahead of me the long and ardous task of ruling out the service that is causing conflict with iTunes6. Then work with the software vendor to arrive at a solution.
This seems to have worked so far- I haven't started to go through ruling out what made iTunes not work; I also haven't tried to connect my iPod or burn a CD, so we'll see.
Windows XP -
Is anyone else having a problem buying episodes on itunes
is anyone else having a problem buying episodes on itunes
Apple is having server problems affecting App Store, iTunes, iCloud, etc…
Check the Apple Service Status(***) page… http://www.apple.com/support/systemstatus/ Wait for all systems to show green.
Here is what Apple's message says…
Multiple Store Services - All users are affected
Customers may be unable to make purchases from the App Store, iTunes Store,
iBooks Store, or Mac App Store.
iCloud Mail - All users were affected
Users may have been unable to access iCloud mail.
iCloud Account & Sign In - All users were affected
Users may have been unable to sign in.
This means no downloads, updates, iCloud and other issues. You may get pop-up windows asking you for password for iCloud, etc…
Try again after it's all green on status page. -
Just having a problem downloading the newest itunes. Everytime I click download it says thank you for downloading but it hasn't worked..?
Try it in a different browser?
-
I'm having a problem while syncing music from my iTunes and other stuffs into iPhone 4S.
I'm having a problem with my iTunes.
The Top 25 Most Played, Recently Added, Recently Played, etc were all missing after I'm syncing it from my iTunes into my iPhone 4S… Why's like that? What to do right now? Because after it's being synced. It's still not there.
Also, why the "Note", "Contacts" aren't syncing? cos I did click everything. Also I want to remove Bookmarks as well from my iPhone 4S.Guys, I've just found out that my Top 25 Most Played, Recently Added, Recently Played, etc were all disappeared already. Why's that? I've restore it from my iTunes like 2 weeks ago. I just wanna know why it's not on my iPhone and iPod touch 4th gen.?
-
Problem While Upgrading from ECC 5.0 to ECC 6.0
Hi Experts,
I am doing project on upgrading.
there is one program in ECC 5.0, and it is working fine in ECC 5.0
But while upgrading to ECC 6.0 it is giving syntax error.
below I am sending the code.
BEGIN OF lty_s_ekab_key, "1001282
konnr TYPE ekab-konnr,
ktpnr TYPE ekab-ktpnr,
ebeln TYPE ekab-ebeln,
ebelp TYPE ekab-ebelp,
END OF lty_s_ekab_key.
CLASS lcl_entity_ekab DEFINITION INHERITING FROM lcl_entity_any.
PUBLIC SECTION.
METHODS: constructor,
if_any_table_mm~read_line REDEFINITION,
if_any_table_mm~read_lines REDEFINITION.
PRIVATE SECTION.
METHODS prefetch
IMPORTING im_key TYPE lty_s_ekab_key
RETURNING value(re_t_ekab) TYPE lty_t_sorted_ekab.
ENDCLASS.
after checking the systax error , i and getting error like lty_s_ekab_key is unknow.
Plz help me to solve in this issue.
Thanks and Regards
Ganesh ReddyHi
In my ECC 6 the defination is like yours:
CLASS lcl_entity_ekab DEFINITION INHERITING FROM lcl_entity_any.
PUBLIC SECTION.
METHODS: constructor,
if_any_table_mm~read_line REDEFINITION,
if_any_table_mm~read_lines REDEFINITION.
PRIVATE SECTION.
METHODS prefetch
IMPORTING im_key TYPE lty_s_ekab_key
RETURNING value(re_t_ekab) TYPE lty_t_sorted_ekab.
ENDCLASS. "lcl_entity_ekab DEFINITION
So try to re-generate the navigation index
Max -
Connection problems after upgrade to iTunes 7
Hi
Yesterday I upgraded my iTunes to 7. Looks cool but I've been having various connectivity problems. Radio doesn't work "An error occured while contacting the radio tuning service. Check your Internet connection or try again later. "
Trying to get album artwork gives the message "iTunes could not connect to the iTunes Store. The network connection was refused. Make sure your network settings bla bla"
Anybody getting this?Hi
Yesterday I upgraded my iTunes to 7. Looks cool but
I've been having various connectivity problems. Radio
doesn't work "An error occured while contacting the
radio tuning service. Check your Internet connection
or try again later. "
Trying to get album artwork gives the message "iTunes
could not connect to the iTunes Store. The network
connection was refused. Make sure your network
settings bla bla"
Anybody getting this?
Had the same problem. I restarted and ran Applejack. Everything works fine now. -
Language problems after upgrade to itunes 7
HELP! I just upgraded to itunes 7 and now my itunes (NOT the store) is in a foreign language. I can't even work out what language it is?
BTW, I always have problems when I upgrade, but this is the worst yet.
Dell Inspiron 9300 Windows XPHi
Yesterday I upgraded my iTunes to 7. Looks cool but
I've been having various connectivity problems. Radio
doesn't work "An error occured while contacting the
radio tuning service. Check your Internet connection
or try again later. "
Trying to get album artwork gives the message "iTunes
could not connect to the iTunes Store. The network
connection was refused. Make sure your network
settings bla bla"
Anybody getting this?
Had the same problem. I restarted and ran Applejack. Everything works fine now. -
Apple TV problem after upgrading to iTunes 7.5
PROBLEM: After upgrading to 7.5, Apple TV no longer recognized iTunes and vice versa.
ATTEMPTED SOLUTIONS: Removed and reinstalled iTunes 7.5 from scratch. Reset @TV to Factory Defaults and reconfigured. Removed Apple TV from iTunes Preferences/Apple TV/Remove Apple TV.
iTunes no longer finds @TV, either in the Preferences/Apple TV pane, or in the Device List. Everything worked perfectly before the 7.5 upgrade. All other features and devices working fine. Have reviewed all postings and eliminated the possibility of firewall or port problems.
Suggestions welcome! Thanks.I have partially resolved the problem. Something with the 7.5 upgrade changed the network protocols being used by the Apple TV... switching to a wired network from end to end with a full shut down and reboot has the @TV back online... I am still working on trying to solve the wireless side of the equation.
-
Problems since upgrading to Itunes 6.0.1.3
Ever since upgrading to Itunes 6.0.1.3, songs will not update to my Ipod. Called Tech Support twice on this and they suggested: Uninstalling/reinstalling Itunes (done three times so far); Reformatting the Ipod back to factory default (done twice); disabling anti-virus. NONE of this has worked. Also found out that Apple Tech Support is VERY weak on Itunes support. Songs show in my Library, but will not update to Ipod. Any suggestions?
Ever since upgrading to Itunes 6.0.1.3, songs will
not update to my Ipod. Called Tech Support twice on
this and they suggested: Uninstalling/reinstalling
Itunes (done three times so far); Reformatting the
Ipod back to factory default (done twice); disabling
anti-virus. NONE of this has worked. Also found out
that Apple Tech Support is VERY weak on Itunes
support. Songs show in my Library, but will not
update to Ipod. Any suggestions?
Found my solution after spending 1 hour/10 min on phone. Tech referred me to article 93716 (removing Itunes, Empty Temp Directory). I still had the same issue (not all songs updating). I checked Windows Explorer and the files that were NOT updating were located in backup folder I had created at some point during the two-week troubleshooting process. When I moved these folders into the Itunes directory, EVERYTHING started working again (creating playlists, burning CD's, moving music to my Ipod).
I learned that even though Itunes shows everything in your Library broken down by playlist, purchased music, etc.--they could be ANYWHERE on your hard drive. However, to update the Ipod, it appears they need to be in the Itunes directory.
I'm not sure why all this broke in the first place, but here is a list of the articles that I followed:
Article #93698, #32222, 93716. I also learned that the Apple Tech Lady, although very nice, could NOT tell me anything about the directory structure of Itunes, where the songs should be, or much about Itunes in general. -
Sync problems after upgrade to iTunes 9
I've seen lots of posts on this but none that directly match my situation. Bought a few TV eps that required upgrade to iTunes v9 so I upgraded. Now only some of the shows will sync to my iPod. Following the sync I've noticed that it is now also removing TV shows that were previously on the iPod, and removing or not locating shows and videos within iTunes which have been there for awhile. These shows are still showing on the iPod though - the whole thing is a mess.
I have a Dell Inspiron 8600 with extra memory and a Seagate 320g external drive that hold iTunes. The iPod is a 32g classic.
Any hep would be appreciated.I have very similar symptoms after upgrade to iTunes 9.1. During sync of Calendars (or if Calendars disabled, during iPhone backup step), Outlook hangs & sync never completes. Outlook stays hung, and hangs again if I kill and restart, until I reboot. Hugely frustrating.
-
Problems while upgrading CE7.1 SP5 to SP6
Hello everyone,
for POC I installed a CE 7.1 Server. After installing it i tried to use the in the Composition Platform included VC. I've got errors as described in my other thread (here: Errors in VC after installation). Than I decided to upgrade the whole CE System. Hoping that the error may vanish. But I have problems upgrading the system. In fact the following packages throw errors. (Container ... is not active..):
sap.com/EP-MODELING
sap.com/EP-RUNTIME
sap.com/GP-CORE
sap.com/GP-PP
sap.com/UWLJWF
sap.com/VCBASE
sap.com/VCFREESTYLEKIT
sap.com/VCKITBI
In the case of GP-CORE the error is:
1. Client path '
skollsapmnt ransEPSinGPCORE06_0-20001929.SCA --> cafeugpexampletimeoff~def.sda'
Sdu info :name 'cafeugpexampletimeoffdef', vendor 'sap.com', location 'MAIN_APL71P06_C', version '2613643', software type ('J2EE', sub type ''), dependencies :[( name 'cafeugpmodel', vendor 'sap.com') ]
Deploy status is 'Aborted'
Description:'1. [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5006] Container SAP-EU-GP is not active at the moment and it is not possible to oncePerInstance sap.com/cafeugpexampletimeoff~def.'.
Now, if i look at the Application "cafeugpexampletimeoff~def" it has the status "Failed to start". If I now start the service "caf/eu/gp/model", and start the named application again it starts fine. But during the deployment of the package GP-CORE the server-instance is restarted and the service "caf/eu/gp/model" doesn't start again automaticaly. And because of this the corresponding application canno't be started and the deployment doesn't work.
Has anyone an idea how to fix this?Some additional Information:
Here are the errors according to the packages. If the package/application which is ment to be inactive IS active I wrote it behind the package name. The packages/applications which are not started can't start because of the in the post above descriped reason.
GP-CORE:
1. Client path '
skoll\sapmnt\trans\EPS\in\GPCORE06_0-20001929.SCA --> cafeugpexampletimeoff~def.sda'
Sdu info :name 'cafeugpexampletimeoffdef', vendor 'sap.com', location 'MAIN_APL71P06_C', version '2613643', software type ('J2EE', sub type ''), dependencies :[( name 'cafeugpmodel', vendor 'sap.com') ]
Deploy status is 'Aborted'
Description:'1. [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5006] Container SAP-EU-GP is not active at the moment and it is not possible to oncePerInstance sap.com/cafeugpexampletimeoff~def.'.
GP-PP:
1. Client path '
skoll\sapmnt\trans\EPS\in\GPPP06_0-20001928.SCA'
Sdu info :name 'GP-PP', vendor 'sap.com', location 'MAIN_APL71P06_C', version '1000.7.10.6.0.20080504004242'
Deploy status is 'Aborted'
Description:'1. Contains Aborted deployment component:
sdu id: sap.com_cafeugpcontentportal
sdu file path: D:\usr\sap\CE1\J00\j2ee\cluster\server0\.\temp\tcbldeploy_controller\archives\463\GPPP06_0-20001928_SCA1222775735062\DEPLOYARCHIVES\cafeugpcontentportal.sda
version status: HIGHER
deployment status: Aborted
description: 1. [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5006] Container SAP-EU-GP is not active at the moment and it is not possible to oncePerInstance sap.com/cafeugpcontentportal.'.
EP-MODELING: (The mentioned Application IS running)
1. Client path '
skoll\sapmnt\trans\EPS\in\EPMODELING06_0-10005152.SCA --> sap.com~portal.modeling.obn.ear'
Sdu info :name 'portal.modeling.obn', vendor 'sap.com', location 'SAP AG', version '7.1006.20080430151312.0000', software type ('J2EE', sub type ''), dependencies :[( name 'vc_ds_service', vendor 'sap.com') ]
Deploy status is 'Aborted'
Description:'1. [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5006] Container developmentserver is not active at the moment and it is not possible to oncePerInstance sap.com/portal.modeling.obn.'.
EP-RUNTIME:
1. Client path '
skoll\sapmnt\trans\EPS\in\EPRUNTIME06_0-10005153.SCA --> com.sap.portal.pcd.gparhiddencontent.sda'
Sdu info :name 'com.sap.portal.pcd.gparhiddencontent', vendor 'sap.com', location 'SAP AG', version '7.1006.20080505213746.0000', software type ('J2EE', sub type ''), dependencies :[( name 'com.sap.portal.pcd.transportapplication', vendor 'sap.com') ]
Deploy status is 'Aborted'
Description:'1. [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5006] Container SAP-EU-GP is not active at the moment and it is not possible to oncePerInstance sap.com/com.sap.portal.pcd.gparhiddencontent.'.
UWLJWF:
1. Client path '
skoll\sapmnt\trans\EPS\in\UWLJWF06_0-20001947.SCA --> com.sap.netweaver.bc.uwl.content.sda'
Sdu info :name 'com.sap.netweaver.bc.uwl.content', vendor 'sap.com', location 'SAP AG', version '7.1006.20080430151312.0000', software type ('J2EE', sub type ''), dependencies :[none]
Deploy status is 'Aborted'
Description:'1. [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5006] Container SAP-EU-GP is not active at the moment and it is not possible to oncePerInstance sap.com/com.sap.netweaver.bc.uwl.content.'.
VCBASE: (The mentioned Application IS running)
1. Client path '
skoll\sapmnt\trans\EPS\in\VCBASE06_0-20001958.SCA --> VisualComposerServerEar05.ear'
Sdu info :name 'VisualComposerServerEar05', vendor 'sap.com', location 'SAP AG', version '7.1006.20080523184435.0000', software type ('J2EE', sub type ''), dependencies :[( name 'vc_ds_service', vendor 'sap.com') , ( name 'com.sap.security.api.sda', vendor 'sap.com') , ( name 'visualcomposer_server_api', vendor 'sap.com') , ( name 'p4', vendor 'sap.com') ]
Deploy status is 'Aborted'
Description:'1. [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5006] Container developmentserver is not active at the moment and it is not possible to oncePerInstance sap.com/VisualComposerServerEar05.'.
VCFREESTYLEKIT: (The mentioned Application IS running)
1. Client path '
skoll\sapmnt\trans\EPS\in\VCFREESTYLEKIT06_0-10005160.SCA --> sap.com~com.sap.vc.wdrunprv.ear'
Sdu info :name 'com.sap.vc.wdrunprv', vendor 'sap.com', location 'SAP AG', version '7.1006.20080430145728.0000', software type ('J2EE', sub type ''), dependencies :[( name 'vc_ds_service', vendor 'sap.com') , ( name 'visualcomposer_server_api', vendor 'sap.com') ]
Deploy status is 'Aborted'
Description:'1. [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5006] Container developmentserver is not active at the moment and it is not possible to oncePerInstance sap.com/com.sap.vc.wdrunprv.'.
VCKITBI: (The mentioned Application IS running)
1. Client path '
skoll\sapmnt\trans\EPS\in\VCKITBI06_0-10005161.SCA --> bi~bikit.sda'
Sdu info :name 'bibikit', vendor 'sap.com', location 'MAIN_APL71P06_C', version '2660071', software type ('J2EE', sub type ''), dependencies :[( name 'com.sap.ip.bi.bases.bics.facade', vendor 'sap.com') , ( name 'tcblloggingapi', vendor 'sap.com') , ( name 'tcepbcconnectivityfwapi', vendor 'sap.com') , ( name 'com.sap.vc.common_sda', vendor 'sap.com') , ( name 'tcblexceptionlib', vendor 'sap.com') , ( name 'tcjeusermanagement~api', vendor 'sap.com') , ( name 'engine.j2ee14.facade', vendor 'sap.com') ]
Deploy status is 'Aborted'
Description:'1. [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5006] Container developmentserver is not active at the moment and it is not possible to oncePerInstance sap.com/bi~bikit.'. -
Hi all,
i want to upgrade signature on IDS, but IDS is on E3.
i know i have to use IPS-K9-7.0-2-E4.pkg to directly upgrade to E4.
my only concern, is there anything to take care of before doing this. or while doing this upgrade.
because this router is very important and i don't want to lose anything,
can you people share the information so that i can do this without getting into any problem.
and please note platform is IDSM-2
thanx
sh version
Application Partition:
Cisco Intrusion Prevention System, Version 6.2(1)E3
Host:
Realm Keys key1.0
Signature Definition:
Signature Update S479.0 2010-03-19
Virus Update V1.4 2007-03-02
OS Version: 2.4.30-IDS-smp-bigphys
Platform: WS-SVC-IDSM-2
Serial Number: +++++++++
Licensed, expires: 03-May-2011 UTC
Sensor up-time is 103 days.
Using 1407365120 out of 1983508480 bytes of available memory (70% usage)
application-data is using 37.4M out of 166.8M bytes of available disk space (24% usage)
boot is using 39.7M out of 68.6M bytes of available disk space (61% usage)
application-log is using 531.3M out of 2.8G bytes of available disk space (20% u sage)
MainApp E-2008_OCT_16_16_24 (Release) 2008-10-16T16:40:57-0500 Ru nning
AnalysisEngine E-2008_OCT_16_16_24 (Release) 2008-10-16T16:40:57-0500 Ru nning
CLI E-2008_OCT_16_16_24 (Release) 2008-10-16T16:40:57-0500
Upgrade History:
* IPS-sig-S467-req-E3 23:25:03 UTC Sun Feb 07 2010
IPS-sig-S479-req-E3.pkg 03:10:04 UTC Thu Jun 03 2010
Maintenance Partition Version 2.1(1)
Recovery Partition Version 1.1 - 6.2(1)E3
Host Certificate Valid from: 27-Jul-2010 to 27-Jul-2012Charanjit --
Before starting any upgrade work, I would suggest ALWAYS reading through the new version's release notes. They will provide any warnings, caveats, or special procedures that might be needed before doing the upgrade. Also, they will list out any basic requirements to use the new software. Release notes for 7.0(4)E4 can be found here:
http://www.cisco.com/en/US/docs/security/ips/7.0/release/notes/22789_01.html#wp1043779
That being said, it looks like you should have no problem upgrading directly to 7.0(4)E4 from your current version. From the link:
"The minimum required version for upgrading to 7.0(4)E4 is 5.1(6)E3 or later"
You shouldn't have to worry about the rest of the router chassis and modules, as the IDSM upgrades and reboots independently from the rest of the system. Just know that the upgrade can take a little while, so be patient while the module reboots and gets started up.
Of course, as with any upgrade, I would make new backups of all configurations and data before installation, just in case something unexpected occurs. -
Problems while upgrading to os x leopard
I have a power mac g5. It was having alot of problems with freezing or not turning on at all. I was told to upgrade to a newer version of os x and that would fix the problem. I was attempting to upgrade to os x leopard, but before it could start the install, it froze again. Now I cant get the computer to turn on at all. Any suggestions???
Hi Danielle,
Tough when it won't even start, foes the Poer light light up at all?
Might try this...
Resetting Cuda/PMU on Power Mac G5, Power Mac G4, Power Macintosh G3...
http://support.apple.com/kb/HT1939
How to reset the SMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005)…
http://support.apple.com/kb/HT1436?viewlocale=en_US
Maybe you are looking for
-
Single line item for multiple open items in app
we have three open items to vendor x 100001000010000 But we are paying to vendor only 10000100005000 At the time of entry system showing Vendor account 25000 To Bank account 20000 To Bank account 5000(
-
M58p 7479-RS2 Small Form Factor PC - Recommendations For Operating System
Hi I am having trouble working out which Operating System to get for this older computer (produced in 2008 I think). The closest model to it I can find, on Lenovo's web site is the M58p 7479-RS1. This shows several firmware updates and a BIOS update
-
Creating a MOVIL and TABLET version
Hi everybody, I am trying to create a movil and tablet version from my muse site, I have +tablet and +movil, I click on that buttons, then I click on copy from my desktop muse site then click in the first two boxes Nothing happens, I get just a blank
-
Disable "Finish Date" recalculation
In project server, we enable single entry mode and auto-approval for timesheet, suppose I have a task => Start on Oct 1, and Finish on Oct 10, Fixed Duration If the resource starts submitting actual hours on Oct 6, the Finish Date will move to Oct 15
-
Ipad mini