I am having a problem with copying and pasting text into the Safari search bar.

For example, when I copy and paste "Organic Chemistry: A Short Course" it will change to Organic%20Chemistry:%20A%20Short%20Course"
It will then tell me it has failed to open page, even though my interenet is otherwise working.
How can I fix this?

What you tried worked for me. Try "Organic Chemistry - A Short Course" It took me to the same search result as what you are trying.

Similar Messages

Problem with copying and pasting text blocks in Fireworks CS5

Until recently when I copied and pasted a text block in Fireworks CS5, the block would retain all formatting applied to the copied text block, font, size, color, etc. Now, the pasted block reverts to some default setting. Oddly, if I copy multiple text blocks, the formatting is retained as expected, but not if I copy a single text block. I cannot find a preference that affects this, and I cannot figure out what might have changed. The current behaviour is definitely not desired, and is dramatically affecting my efficiency. Anyone experienced something similar or have any ideas how to correct this? Thanks.

Sure, thanks for replying so quickly. My workflow is simple. My problem is limited to copying and pasting within Fireworks. I typically select an entire block with the main selection arrow but I sometimes use this one too depending on the context. I usually just use the keyboard CTRL-C then CTRL-V to paste. Previously (and I have been using FW for years, it's always been the same) it would paste an identical text block directly over the top of the copied one, and it looked exactly the same, same font, same color, etc. Now, it pastes a new block in the center of the document and all the formatting has reverted to what I guess is the default, in this case Myriad Pro 12pt. The behavior is the same no matter which arrow I use to select the text block. I tried Edit>Copy and Edit>Paste, the effect was the same. The Duplicate function seems to work as desired, but I had never noticed or tried that command before reading your post. Using the keyboard to copy/paste is such an ingrained habit I'd much prefer to continue using it as I always have instead of trying to retrain myself. (I'm old, retraining is hard!)
(Selected block)
(pasted block)
Most often I copy and paste directly on the canvas, but occasionally will do it within the layers panel. Both now have the same undesired effect. I also tried creating a new document to see if it was a corruption in my current file, but the issue persisted to the new document as well.
Thanks.

How to copy and paste text into email without HTML gibberish

I've had trouble for some time now copying and pasting text into and out of yahoo emails. I can't just copy and paste text, I have to first transfer to Word for Mac and then paste into a yahoo email. Then I end up with what looks like three lines of HTML gibberish at the start of the pasted text each time. Isn't there a clean and direct way of copy and paste of text into and from emails in yahoo? No other email I work with has this problem, and the Safari browser doesn't give this same issue
== This happened ==
Every time Firefox opened
== some recent Firefox update, I think

I have to agree with bmalmquist. Need for Speed seems to work great on the Playbook. I didn't buy the Playbook to play games though. RIM needs to shift their focus from games to useful and productive apps. The apps I need to use are either missing very important features, or are just completely missing. It is somewhat disconcerting to see new apps appear in App World only to discover that the new apps are mostly games. I'm seeing lots of apps that would help me waste time, but very few that will actually help me be more productive.

Why can't you copy and paste text from the Dictionary widget?

I use this dictionary often, but I wish that I was able to copy and paste the text from it.

Just use the Dictionary application in the Applications folder. You will have no problem copying and pasting text from the full application. I just tried it and it works fine.

HT5569 Is there a way to store a wi-fi password on an iPad and then copy and paste it into the proper space when you want to connect to your password protected network? (the password is 31 random characters)

Is there a way to store a wi-fi password on an ipad and then copy and paste it into the proper space when you want to connect to your password proctected newwor? (the password is 31 random characters)

Yes, if both the Mac and iPad are setup using the same iCloud account, then any notes you enter on the Mac will be synced across to the iPad almost instantly.
Same occurs with the 1Password app I mentioned. If you have both the Mac and iPad versions of it, and setup either iCloud or Dropbox syncing, any passwords entered on the Mac will be synced to the app running on the iPad ready for copying and pasting. This would be the most secure method, but not the cheapest.

I have created two related books in Lightroom 5 (Volumes 1 and 2) but my balance of page numbers is off. So I'd like to take some pages out of one book (complete with images) and paste them into the other. Is this possible?

I have created two related Blurb books in Lightroom 5 (Volumes 1 and 2) but my balance of page numbers is off. So I'd like to take some pages out of one book (complete with images) and paste them into the other. Is this possible?

Can you zip up a few of your GoPro images, upload them to dropbox.com and post a share link, here, so others can experiment with them, or do you mean this issue is global to all camera models?

How can I copy and paste text into Word in Acrobat 9 Pro

How can I copy and paste text into Word from Acrobat 9 Pro?

You might find it easier to export the file to Word under File > Export > Word in Acrobat 9.

Cannot copy and paste text into Photoshop CS6

I am not able to copy and paste text from non-Adobe programs (like Keynote or Word) into Photoshop CS6. I get an error message reading "Could not complete the Paste Text command because the clipboard data is empty or invalid." I have tried shutting down Photoshop, shutting down other programs, re-starting my computer, adjusting my Preferences and asking Adobe for help by phone and chat. I am on a new iMac and have no third party plug-ins installed. Can anyone help?

Yesterday i update Yosemite and Adobe Photoshop CS6
i found error text message like you everytime when i used fontAwesome on Adobe Photoshop CS6 and then i found out to fix this problems Yeahh…
Try My Way to fix it out
-> copy The Text you want to use
-> paste your text (from your clipboard) To App TextEdit
-> then Copy again
-> back to Photoshop paste it on your document layout
-> Done

When I copy and paste text into Captivate 8, special characters disappear

I'm trying to copy and paste text from a PDF into Captivate 8. When I paste, all the accent marks disappear. (for example: ê shows up as e). I've tried pasting into other applications, and the special characters paste correctly, so it's a Captivate problem. Has anyone else had this issue? Is there a quick fix?
Thanks in advance!

Upgrade your browser to Firefox 8 and try
* getfirefox.com

I'm using firefox 3.6.12 and having problem with copy and pasting.Going on for about 2 weeks. Thanks.

When trying to copy and paste, i have a hard time with at least 9 attempts before it takes effect. Thais has been going on for about 2 weeks now. Everything seems to happen as it's suppose to until you go and try to paste.

Update; As of now, i am able to copy and paste. Steps i have taken to correct issues i had before.
- I installed browser again, but issue came up again.
-I uninstalled Google Chrome browser, it recently showed up in my task manger when i was not using the browser. AnVir Task Manger showed it being in use, so i stopped the processor and uninstalled Google Chrome.
'''From Zdnet;Google has shipped a new version of its Chrome web browser to fix at least 14 security vulnerabilities that expose users to malicious hacker attacks.'''
-I was using Iobit Toolbox Memory. For some reason, this seemed to be the cause of the problem. After uninstalling it, i am able to copy and paste with no more issues.
I'm no expert, but this has worked for me. Enjoy your weekend. :-)

Problems with copy and paste document size

Using Adobe illustrator I have been copying images from a .pdf and then pasting in photoshop having made an action script which does : -
>Make New document
preset clipboard
>Paste
with aa
as: smart object
center: center
Translate 0, cm , 0cm
>Save
As JPEG
Quality 12
Matte: none
In E:/my documents....
with copy
most of the time it works but occasionaly pasting into photoshop the clipboard size is wrong it makes it much much smaller,
even if i bypass using the script and copy from illustrator and in PS try Ctrl N and Ctrl V.
Sometimes also clipboard isnt even selectable it wants to use a specific document size.
The only way I can fix it is close down Ai and PS, launch Ai and PS, copy in Ai then in PS press Ctrl N for New, choosing clipboard, Ctrl V to paste enter to confirm, then it seems happy and I can then carry on using my Actions or manually pasting to my hearts content.
My question is what is causing it to have this quirk, how can I avoid it if possible or is there no avoiding it?

>> How can I have dreamweaver hold format with
different tabs and bullets
Generally a bad idea. Word's HTML formatting is notoriously
flawed. And,
HTML doesn't allow tabs. You probably need to take time to
learn (X)HTML &
CSS before going further. You seem to be headed for disaster
if you expect
to just grab text from Word and plop it into a web page with
good results.
Web pages are in an entirely different world than Word docs.
Walt
"sablowers" <[email protected]> wrote in
message
news:fn5ag2$mvv$[email protected]..
> Hi Everyone
>
> I am looking for some help when I copy and paste my word
document into
> dreamweaver it does not hold the format even through I
have paste full
> formatting selected. How can I have dreamweaver hold
format with different
> tabs
> and bullets
>
>
>

Problem with Copy and Paste in Edit

Today i cannot get Copy and Paste to operate. After highlighting a link in blue I cannot get the Copy to register. The link stays blue and does not respond to Copy click. I send links on Yahoo IM to friends of sites or Youtube videos. Thanx for the great help here!

I'm glad that is working again. Copy and Paste is such a fundamental operation, a computer is useless without it.
By the way have you had a look at Mac 101 Essentials? At the bottom of that page are further link. Just thought it might be useful to you as you are new to Apple Macs.
Happy computing.
regards roam

I use Acrobat to convert firefox pages to pdf and with firefox4 I need to be able to copy and pasted text from the pdf and no longer can.

With the prior version of Firefox I could convert web pages (financial data) to pdf for maintaining historical files. And then with the pdf, I was able to copy and paste the numbers into Excel. With Firefox4, I can convert to pdf with Acrobat but I cannot access the numbers for copying and pasting as text, only as a picture. While I prefer Firefox, I check to see if this problem recently started with the "other" company's web browser and did not have this problem. So, it is not Acrobat.

HI djlarp,
Try triple-clicking in the text that you want to select--it can sometimes be tricky to select text in a converted document. If that doesn't work, it could be that the PDF document was created from a scanned document, and OCR wasn't enabled when you converted the document. (However, OCR is enabled by default when you convert via the ExportPDF website.)
If you're unable to select text by triple-clicking, let us know. I would be happy to take a closer look at your files.
Best,
Sara

HT201269 itunes cannot see my iphone backup. I have a backup of the backup on an external HD, but even tech support cannot figure this one out. I copy and paste backups into the correct folder but itunes still does not see it. All I need are my contact

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Copy and Paste text into AEFX stopped working

I have succeeded in copying and pasting two paragraphs of text from Word Pad into AEFX. (ie two layers). I applied Typewriter FX and adjusted parameters , exported etc all fine.
Took a break and now I can not seem to get the Copy and Paste to work and I have another 8 layers to do.
Not exactly sure what I have done or changed to stop this Cut and Paste method from working. (And I do not wish to hand type in the test if possible - Pharmaceutical Mandatories)
Any ideas? Thanx.

To reassure you: You don't need to do anything to trigger these issues. ;-) They happen regularly, yet under lab conditions there seems no clear way to nail them down... Most of the time restarting the system and starting with a clean slate gives back the functionality.
Mylenium

I am having a problem with copying and pasting text into the Safari search bar.

Similar Messages

Maybe you are looking for