I am having a strange problem starting up

im not sure if this is the correct category for this sort of problem...but anyway. Often when i start up my computor, there is a strange repetitive clicking sound, and my computer ceases to start up. this also happens at random times while i am using my computor; it is not only at startup. the whole computor seems to freeze, except the cursor cam move...but it is only a spinning wheel.
im fairly sure this is a hardware issue as opposed to a software issue because of the clicking sound, though i am not positive. the sound seems to be coming from my internal disks.
i have already tried switching power cords, repairing the disk and repairing the disk permissions, and i have reinstalled OS 10.3 onto an alternate disk. i have also attempted the command-s thing at start up to do the fsck -fy command, but none of these things helped. another bit of info- when i did the command-s and the clicking started, the computer said something like the 'data control device is blocking the bus'.
does anyone have suggestions? anything would be much appreciated.
G-4 Mac OS X (10.3)

Phoenix314,
As previously posted, backup as much as you can ASAP!
If you have access to another Firewire enabled Mac, you can use Firwire Target Disk Mode, to do a complete system backup, or to try to salvage as much critical data as possible.
Once your data is secure, you could try an Erase & Install, zeroing all data, but if the HD is shot, it probably won't do any good.
ali b

Similar Messages

I am having a strange problems on the Data entry Forms

A form that has been used since 2005 in an old version of HFM 3.51 was migrated to SYstem 11.1.2.1 in January of 2012 and has been working since then. Suddenly we start having some strange problems. Our response time has been very slow and I am wondering if there were some problems in any of the services. Maybe a service did not start properly related to the WEB forms.
We entered a number in one of the cell to be: 348336349 as soon as we hit enter, the number was formatted to 348,336,349 but when I submit the number it came back as 3. I tried it several times and it did not work, I checked the scaling and that was set blank. One of my user tried it and it did not work. I tried looking into the Preferences and my screen froze. In the meantime one of my user was able to enter the number and was able to refresh it as well. Then she enter another number on a different cell and the same problem occurred it seemed as if it truncated all the digits except for the left most digit, we are unable to figure out how to resolve this issue. The number entereed in the cell is 826,251,218 it stores 8 and loses the rest of the 8 digits. I right click and checlk the properties and it says that it has stored 8 instead of 826,251,218.
Following is the DEF script. Does anyone has any ideas, I am wondering if I have to restart the services..
ReportType=WebForm
ReportLabel=Aging_Receivables
ReportDescription=Aging Receivables
Instructions=Please make sure you set up your point of view (POV) appropriately. Business Unit (BU): AG, CE and Other_BU. Brand: Case, NH and Other_Brand.
BackgroundPOV=S#Actual.Y#2011.P#Jan.w#YTD.V#<Entity Currency>.I#[ICP None].C2#SERVICED.C3#GL_INPUT.C4#Input
SelectablePOVList=S{[Hierarchy]}.Y{[Hierarchy]}.P{[Third Generation]}.E{[Hierarchy]}.C1{[Base]}.C2{[Hierarchy]}.C3{[Base]}.C4{GL.[Hierarchy]}
C1=A#Current
C2=A#0_To_30
C3=A#Total_Current
C4=A#31_To_60
C5=A#61_To_90
C6=A#91_To_120
C7=A#121 Plus
C8=A#Total_Past_Due
C9=A#Total_Aging_Rec
C10=A#Current_OffBook
C11=A#Past_Due_OffBook
C12=A#T_Aging_Rec_OffBook
C13=A#Total_MP_Aging_Rec
C14=A#Aging_Rec_Diff
R1=C1#_Retail
R2=C1#_Wholesale_Tot
R3=C1#_Wholesale
R4=C1#_Wholesale_Natl
R5=C1#_Wholesale_Othr
R6=C1#_Credit_Card
R7=C1#_Specialized_Lending
R8=C1#_Marine
R9=C1#_Soris
R10=C1#_Other
R11=C1#_Material
R12=C1#Sup_Product
FormInputBoxLength=23
PrintNumRowsPerPage=33
PrintNumDataColsPerPage=8
ShowLabels=False
ShowDescriptions=True
SuppressColHeaderRepeats=False
Edited by: user8267293 on Aug 8, 2012 12:41 PM
Edited by: user8267293 on Aug 8, 2012 12:43 PM

Hi,
Did you find a way to solve your problem ? We have exactly the same for one application and we are using the same version of HFM : 11.1.2.1.
This problem is only about webforms. We can correctly input data through Data Grids or Client 32.
Thank you in advance for your answer.

Anyone else having this strange problem?

my brother bought this ipod mini a little over two years ago. my parents gave him a video one for his birthday and he gave me the mini. it would work perfectly, with no problems, until now. when i try turning it on, all it shows on the screen is the apple logo. and it flashes on and off. then the logo completely disappears forever, unless i press a button. then it comes back and does the same thing over. i tried to reset it but that doesnt respond at all. also if i connect it to the computer, it says charging and shows the battery halfway charged but thats it, it doesnt move from that. any help would be appreciated.
Windows XP

I am having a similar problem. I reset my i pod and connected it to my computer, but there was no response. The computer didnt show the i pod, and my music was never transfered back as it would be usually when you reset the i pod. after forgetting about it for a few days I tried to disconnect the i pod, [it had been charging, with a half full battery icon on the screen for two days] and it immediatly showed the apple, and then a battery exhaustion icon and the screen went blank. I am contemplating getting a new i pod altogether.

I am having a strange problem with the awesome bar

The awesome bar/location bar is no longer as awesome as it used to be. When I start typing in an address it seems like it no longer checks through my history and gives a list of possible matches but just gives the stem of an address. For example, if I type in 'goo' it will complete this to 'google.com' if I then append this with an '/a' it will complete this to 'google.com/analytics' but that's as good as it gets, as I say, no list from the history or bookmarks.
I've checked the options and also about:config and all the settings are as they should be, as far as I can tell (and I certainly hadn't changed any of them when it started misbehaving). I've also disabled all extensions and plug-ins.
It's driving my slightly bonkers because I quite often use sites with long addresses and can't remember each of the components of each address. I'd switch to using Chrome but I also use Firebug a fair bit so don't really want to do this.

Hi cowtan, <br/>Sorry you are having problems with the awesome bar.
I imagine the new behaviour may be reversed by changing some pref but I have not looked that up.
Regardless of the new behaviour you seem to have some fault as my awesomebar still gives bookmarked items.
As a troubleshooting step try adding an asterisk in the awesomebar (as first character or anywhere) that should then filter the results in the dropdown list to bookmarked only items, does that work ?
* see [[Search your bookmarks, history and tabs with the Awesome Bar#w_changing-results-on-the-fly]]_changing-results-on-the-fly
You possibly have some extension interfering with the awesome bar, try Firefox in safe mode (but do NOT* at this stage try the Reset Firefox option)
<nowiki>*</nowiki>'''edit''' - personal opinion, if a user; such as you; is knowledgeable enough to use ''about.config'' the easy solution of ''FirefoxReset ''is probably not the best route, as it can have unwanted side effects that are avoidable.
* [[Troubleshoot Firefox issues using Safe Mode]]
Do your bookmarked items appear in safe mode ?
<u>Try a new Profile.</u><br/>The best method for troubleshooting this will be to set up a new Firefox profile, you can then: experiment, troubleshoot, alter settings or extensions installed in that profile without changing and potentially damaging your current profile.
* http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
I suggest to prevent unexpected problems you
* use a sensible name such as test 2012 for the profile name
* ensure an empty folder is used & do not then rename or delete the new profile (instead add or delete shortcuts to it)
* also see http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Having a strange problem with Drop Shadows in Ai CS5

Hi there Adobe experts!
I have tried eveything... this is my first post here, but it's my only hope. I have a project where I apply drop shadows to linked images to give a sense of depth. A few days ago, the drop shadows just stopped feathering. It doesn't matter what the blur is set to, its just one colour. Transparency still applies. Here's the kicker...I can open files with applied drop shadows to them and they look fine. But if I try to edit that existing shadow, even by 0.0001 of a pt, it will lose its feathering.
I've deleted the AiPrefs file, and played with just about every setting in document raster effects settings. I have no clue what would cause this.
Oh, and whatever the issue is, it starts in my computer, and then attaches to the files... I sent the ai file to a friend, and when he tried to add drop shadows, they screwed up on his machine too. But it isn't the file. I've attached a brand new (and CMYK, just to see if that would make a difference...) file of a sphere showing the problem. Even with the blur super high, the shadow remains flat and monochromatic.
Any geniuses seen this before or have a remote clue how to solve this one?
Thanks in advance,
Luke

All my ram is tripple channel DDR3, same clock speeds, but some is 2GB and some is 4GB.
I just pulled the 2GB sticks (which I had in originally) and left in the 4GB sticks (the ones I recently purchased) and the problem goes away. It's quite odd, I've never had a problem like this before with any other application. I know it's not the best thing in the world to have different types of RAM installed, but my motherboard supports it and I've never had a problem doing it before.
I would be interested to see if this problem is reproducable in the OP's senario, or if this problem can be reproduced by others.
Conclusion: the 2GB sticks work on their own, and the 4GB sticks work on their own. I definitly would not call this a hardware problem, it's an adobe problem and they need to fix their software.

Having a strange problem saving work in PS CS4.

Hello,
Recently, work that I've saved in PS CS4, has not been visible in Bridge, although it can be seen in Explorer >My Pictures.
I don't have any idea why this happens, but I believe it's related to a disastrous proble I'm having today with InDesign CS4 where I've lost 4 days of work which had been saved in the usual manner.
This is a really serious problem because I don't know if anything I save now will be retrievable.
Please help. thanks for your consideration,
George Masi

what do you mean by "not vissible"? the thumbnail doesn't display properly? the files can't be opened?

Having a strange problem with LOCALE.

Hey im trying to run emelfm2 but when im trying to start this message comes up and it have showing up while using other apps to. Maybe it says what to do but i don't get it :(
Last edited by Afnaf (2010-02-11 20:45:39)

Now i have read http://bbs.archlinux.org/viewtopic.php?id=82940 and done what was said there, and it still isnt working, does'nt anyone have any idea?

Having a strange problem. When streaming music and or music videos to my Apple TV from my Mac sometimes the Apple TV seems to loose the stream and the only way I can get it going again is to turn off home share on my Mac and then turn it on again.

I do not have this problem when streaming music/music videos from my IPAD or my Iphone

The speed is probably due to your network, it is quite indirect for mirror/AP.
For the audio, you cannot split audio and video so the audio will play where the video does.
Jules

I'm having a strange problem with itunes Match (as do many apparently)

In several instances, I have individual songs within an album that has been matched that are showing as ineligible. How to fix? I have two Apple IDs authorized on my computer (my wife's and mine) but that shouldn't explain individual songs that have been purchased as a part of an album not being eligible. All my software is updated. Fairly irritated by this and have been doing the usual solutions: updating iTunes Match, individually trying to add to iCloud, restarting iTunes…any help would be appreciated.

There are two ways to "fix" it:
1. Ignore it. Really - it's not hurting anything. You can just turn off the column that shows whether it's matched or uploaded, and you won't see it anymore.
2. If these are songs that you purchased from iTunes, you can delete your current track (make sure you check the option to delete from the cloud too, and obviously make sure you have a backup copy just in case something goes wrong) then go to the iTunes store, into the "purchased" section, and redownload the purchase. The newly downloaded version will then match. (But do not try to jump between AppleIDs - you'll end up locked out for 90 days).
For songs that you did not buy from Apple, the only option is to ignore it. Matching is imprecise, Apple can only compare against what's currently in their store and that may have been re-digitized or reprocessed in some subtle way that means it's no longer the exact same edition of the song that you have - even though to your ears and eyes they are identical.

Strange problem with forms. browser does not send syn

We are having a strange problem and I hope someone can help (im
stumped).
setup
I have a webserver (iplanet 4.1 sp8) running in secure mode. It has a
weblogic nsapi plugin and forwards EVERYTHING over to an app server.
The app server runs weblogic 4.5 sp10 and hosts both servlets and
static html for an application we are developing.
customers load a long form and are given the ability to upload several
files, but upon pressing the submit button on the form (they must do
each file individually) we get an error message that the page cannot
be displayed.
upon investigation, I look at a tcp trace and find that when the
submit button is pressed, the browser sends an ack packet to the
netscape server and it responds (correctly IMO) with a rst flag.
Why doesn't the browser start communication with a syn/syn-ack/ack
sequence? The form appears to have been completely loaded.
To aggravate matters more, this problem does not always occur and
clearing the browser's cache seems to aggravate it.
I would appreciate ANY help that could be offered.
sorry for the long post,
-Chris
Chris Regenye
Supervisor Systems Services
PR Newswire
[email protected]

In article <[email protected]>,
Chris Regenye <[email protected]> wrote:
Barry Margolin <[email protected]> wrote in message
news:<vzdh7.8$5%1.649@burlma1-snr2>...
In article <[email protected]>,
Chris Regenye <[email protected]> wrote:
We are having a strange problem and I hope someone can help (im
stumped).
setup
I have a webserver (iplanet 4.1 sp8) running in secure mode. It has a
weblogic nsapi plugin and forwards EVERYTHING over to an app server.
The app server runs weblogic 4.5 sp10 and hosts both servlets and
static html for an application we are developing.
customers load a long form and are given the ability to upload several
files, but upon pressing the submit button on the form (they must do
each file individually) we get an error message that the page cannot
be displayed.
upon investigation, I look at a tcp trace and find that when the
submit button is pressed, the browser sends an ack packet to the
netscape server and it responds (correctly IMO) with a rst flag.
Why doesn't the browser start communication with a syn/syn-ack/ack
sequence? The form appears to have been completely loaded.It may be trying to reuse a persistent connection, as recommended in
HTTP/1.1.Great, but the server obviously doesn't believe this is the case. Any
idea how to correct this situation? also... as I mentioned this
problem is intermittant(sp?). When it does not occur, tcp
communications are normal.It sounds like the bug is in the browser. When it gets the RST, it should
realize that the old connection has been dropped (even if a server
implements persistent connections, like it should, it's allowed to close
idle connections after a timeout or if it's running out of resources).
When that happens it should automatically retry on a new connection.
This might explain why the problem is intermittent. The browser is happy
when the connection has remained open, but it doesn't handle the occasional
cases where the server has closed the connection unexpectedly.
Barry Margolin, [email protected]
Genuity, Woburn, MA
*** DON'T SEND TECHNICAL QUESTIONS DIRECTLY TO ME, post them to newsgroups.
Please DON'T copy followups to me -- I'll assume it wasn't posted to the group.

Strange problem with HD

I'm having a strange problem with my titanium 15" Powerbook G4 (I believe it's 867Mhz). When I start it up, I get a flashing question mark/folder, and I can't boot into safe mode or make it start up past that question mark.
Here's the really weird part-- the hard drive is completely fine. I booted it in target mode, was able to access all files on it, transfer files to and from it, and when I ran disk utility, everything was fine.
I heard disk utility doesn't catch everything, so I ran fsck 3 or 4 times with both the -f and -r options (to rebuild the file catalog), and it came up with 0 errors.
I think it's just not recognizing the hard drive as the boot volume, but when I press option on startup to select it, it doesn't pop up in the list-- so there's no way to select it.
Any suggestions?
Thanks!
Tim

I reinstalled Leopard on it using the target disk method (because the DVD drive is broken on the computer). It installed fine, and I can see all system files on it, but I can't boot off of it-- same problem. Thanks for the suggestion... any others?
Tim

10.4.10 update and very strange problem with Mac Mini

Dear All,
I have just updated my Mac Mini Intel and I am having a strange problem.
My Mac Mini has problems booting up. Sometimes I get through the login screen as normal but my wallpaper shows and there are no desktop icons, no dock, no top of screen finder menu bar. Some other times I get stuck in the progress bar of the booting up.
I tried to run utilities from install disk and there were no problems detected.
The VERY STRANGE thing is that several times now as I put my fingertip onto the power button laying it on the button but not pressing it yet (because I would like to shut down the system), the system kicks in and becomes unfrozen!!!
Someone in the 123macmini.com forum says that this problem is related to the airport receiver which is near the power button.
What do you think about it???
MacBook and MacMini Mac OS X (10.4.10)

ok, I have found a kind of fix for the problem, although may run a hardware test to check something!.
I unplugged all USB and Firewire devices, I turned off Bluetooth and Airport, reinstalled the 10.4.10 combo update, when it restarted the starting mac osx screen took barely a second or 2 to load (my comment above is becuase from when I first got it on Sunday I noticed it was slow to boot up, also noticed that the screen resoulution I have set does not kick in until I log on, although this may be becuase this mac mini is an intel one). The computer booted up very quickly and I tuend on bluetooth and airport with no issues and plugged all the usb and fireware devices back in. I again turned the airport off and restarted and again it booted up very quickly logged on and swithced the airport back on. I decided to reboot with the sirport on and it got stuck at the end of the os x starting up screen, I waited a few mins switched it off and on again and it booted up fine although slower. I dont mind turning the airport off when I power down as the mac usually stays on anyway. I assume Apple will release a fix for this as a lot of people seem to have the problem so think I will stay put with this for the time being. It was taking a several goes to get to the login screen before but usually got there every few boots.

Strange problems on Macbook Pro over past year...

I'm about to do an erase and install after having numerous strange problems on my mid 2009 17" Macbook Pro (Leopard) over the past year, some of which I have opened threads for on these forums.
They are listed bellow to see if anyone wants to give their final two cents as to what is causing them. They may or might not be related.
1) I recently found the "Unknown" user classifications at second from top in the user priveleges for the main Macintosh HD folder and "Local Work" – which is my main folder for work.
http://discussions.apple.com/thread.jspa?threadID=2741617&tstart=0
2) Last Summer I had some very strange login problems which were well documented in this very long winding thread here:
http://discussions.apple.com/thread.jspa?threadID=2485199&tstart=0
3) Can't access iTunes store due to this error code -54. Thread opened here:
http://discussions.apple.com/thread.jspa?threadID=2653733&tstart=0
4) Some proceses I've seen in the activity monitor that are possibly a little sketchy are as follows:
- "netsessionmac1" ... Akamai playing about?
- "TaskManagerDaemo" ... with "Root" user, ... sounds a bit vague and possible malware according to google?
5) In Skype I get constant warnings of other computers trying to connect from Little Snitch and Virus Barrier. I get so many of them one after they other pausing skype that I can only use Skype with Little Snitch off. I can only use it late at night also as there seems to be more attempts being blocked in virus barrier during the day that I can't even get past the login:
Some examples in screen grabs:
http://oi56.tinypic.com/xkwwtf.jpg
http://oi55.tinypic.com/2v2w941.jpg
And other examples of the hundreds of different IP addresses I've had asking to access computer on some obscure 4 digit port:
http://whatismyipaddress.com/ip/86.178.52.58
http://whatismyipaddress.com/ip/94.168.76.16
http://whatismyipaddress.com/ip/94.171.116.123
http://whatismyipaddress.com/ip/92.235.196.125
http://whatismyipaddress.com/ip/92.239.25.70
http://whatismyipaddress.com/ip/192.168.0.1
http://whatismyipaddress.com/ip/92.235.208.101
http://whatismyipaddress.com/ip/92.236.252.132
http://whatismyipaddress.com/ip/85.15.190.49
... etc
6) I have to constantly open and close Mail after it hangs on sending. Says there is a connection problem on port 110 or whatever, but words fine as soon as I open again. This problem happens particularly when I want to send from my 2nd or 3rd POP or IMAP other than my normal one.
7) Slow Safari/Firefox and internet.
8) I got this strange warning about my IP changing recently when downloading a file:
http://oi53.tinypic.com/2z4b77o.jpg
9) My internet cuts out for large periods of time while the other PC desktop in my house works perfectly fine.
Well, any last suggestions much appreciated. Many thanks.
Message was edited by: Scottishengineer

I suppose your expanding battery problem could have caused some or all of these problems, but most of them sound like software issues.
If I were you I'd try a few things:
1. boot from your snow leopard install disk and repair your startup disk with disk utility.
2. repeat the repairs until no repairs are reported (the toilet paper principle).
3. repair permissions again.
4. if the problems persist, trash the preferences files for the misbehaving apps.
5. if the problems persist, delete the misbehaving apps and reinstall them.
6. it the shutoffs persist, try a PMU reset.
7. a PRAM reset would probably be a good idea too.
8. if none of that works, archive and reinstall.
there is a freeware utility called applejack that will also do most of this.
Details on all of these will be readily available with a google search.

Strange Problem in dynamically list population with record group

Hello Room,
I am dynamically populating a single list with 2 record groups. I am having a strange problem. All the code are written in 2 seperate buttons. The code of every button is given below.
Button 1 code:-
DECLARE
rg_reports RECORDGROUP;
rg_name VARCHAR2(40) := 'REPORTS';
vTemp NUMBER;
BEGIN
-- Pls make sure Group doesn't already exist
rg_reports := FIND_GROUP(rg_name);
-- If it doesn't exist then create it and add ur query to it
IF Id_Null (rg_reports) THEN
rg_reports:=CREATE_GROUP_FROM_QUERY(rg_name , 'SELECT companyname,to_char(co) from companymaster order by companyname');
end if;
--Populate the Record Group
vTemp:=POPULATE_GROUP(rg_reports);
POPULATE_LIST('REPORTS.EXAMPLELIST', rg_name);
Delete_Group( rg_reports );
END;
Button 2 Code:-
DECLARE
rg_reports RECORDGROUP;
rg_name VARCHAR2(40) := 'REPORTS';
vTemp NUMBER;
BEGIN
-- Pls make sure Group doesn't already exist
rg_reports := FIND_GROUP(rg_name);
-- If it doesn't exist then create it and add ur query to it
IF Id_Null (rg_reports) THEN
rg_reports:=CREATE_GROUP_FROM_QUERY(rg_name , 'SELECT accountname,to_char(co) from accountmaster order by accountname');
end if;
--Populate the Record Group
vTemp:=POPULATE_GROUP(rg_reports);
POPULATE_LIST('REPORTS.EXAMPLELIST', rg_name);
Delete_Group( rg_reports );
END;
The code is same here only the sql is different in these 2 buttons. Now the problem point.
when i press button 1, I get the list populated ok. when i try to click on the list item and keep the button pressed the list gets scrolled properly.
when i press button 2 after that i get account names well populated in the same list item as well, but this time, when i keep the button pressed the list does not scroll below as in button 1. It does not even allow to select different item from the list of button 2 code.
I tried to clear cache, cookies, exit browser everything and try to run the button 2 first, but still the problem in button 2 code.
Following are my system details.
windows 7 professional edition.
Oracle database 11g on windows 7
Oracle forms 10g patchset 10.1.2.0.2 on windows 7
Browser Netscape Navigator with oracle jinitiator 1.3.1.22
But this form is run by a client side html file where oracle forms 10g is not installed on windows xp. html file is just referring server url to run the module. The file is run on Netscape navigator browser with oracle jinitiator 1.3.1.22
My question is that is this a bug ? if button 1 gets the list item scrolled, why is the problem with button 2 even though i press it first. Here I am deleting the record group also. after the code is over. Initially I thought this may be the character length problem so I took the maximum character length for that list item as given by the 2 columns in database.
Why is the list scrolling not happening in button 2 but in button 1 with same codes on both ?
Anybody please help me.

The problem is the second query. I would guess that the TO_CHAR(co) is not unique for each account, but is the same for the accounts. And as the second item in the select-list is the listitems values, all your listitem-entries have the same value. therefore, of you select any entry, the list will always go the the first entry again.
Adjust your query.

Strange Problems With Display and Permissions Since 10.5.1 update.

Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
Here is a screen shot of the line and dock problem.
Here is a screen shot of my "About This Mac.
If anyone could lend some light on this issue, I would greatly appreciate it.
Thanks
Jeff

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

I am having a strange problem starting up

Similar Messages

Maybe you are looking for