I am having issue with my portal the first time I login....
When I try to login into my portal in the morning, I get a timeout issue. I have been told that the database is going into a "Wait" mode and somewhat goes into hibernation until it is called on again. When it gets called on again (me logging in the morning) it times out. 10 minutes later, it come up and runs fine.
Has anyone experienced a similar occurrence?
Oracle Support is absolutely no help. I am at a point where if I can't get this resolved, I am going to try Microsoft SharePoint.
Describe the issue.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
I saw one post where a user said dust got in the small mic hole. Used a vacuum cleaner to remove and audio restored. Try it.
Cheers, Tom
Similar Messages
-
Is anyone else having issues with "skipping" while the songs are playing?! It is very aggravating to us... and we've had it going on for several months now. Any ideas at all how to fix it?
So, don't use youtube.
http://www.the-top-tens.com/lists/best-alternatives-youtube.asp
http://www.youtubealternative.com/ -
I am having issues with connecting to the store...the page just hangs and when I run Diagnostics it states that a secure connection could not be established.
I have contacted apple via email and tried all the steps they have recommended and it is still not working.
I have tried disabling my McAfee and that does not work either.
Anyone that the phone number to apple express so I don't have to keep waiting for them to email within 48 hours?
Thanks.With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
Is anyone else having issues with airplay after the Lion update?
Is anyone else having issues with airplay after the Lion update? It sees the libaray but won't connect...
I'm having the same issue. So far all lion has done for me is make all my microsoft office documents un-readable until I upgrade (about $150) and lose my home share capabilities...can anyone assist with this?
-
I synced my 3G iphone with itunes for the first time, and lost everything on my phone. how do i get it back?
You don't.
You synced your iPhone with iTunes for the first time after how long?
And this didn't happen by syncing only. This means you transferred the backup for another iPhone or you restored the iPhone with iTunes. It is not possible for everything to be lost by syncing alone. All iTunes content on your iPhone can be lost but not any photos in the Camera Roll and the same for contacts unless you synced contacts with an empty address book application on your computer. -
I have archived my contacts on my computer and can reinstall only those, but I can't figure out how to wipe all of his contacts off my iphone.
You don't.
You synced your iPhone with iTunes for the first time after how long?
And this didn't happen by syncing only. This means you transferred the backup for another iPhone or you restored the iPhone with iTunes. It is not possible for everything to be lost by syncing alone. All iTunes content on your iPhone can be lost but not any photos in the Camera Roll and the same for contacts unless you synced contacts with an empty address book application on your computer. -
Servlet failed with ServletException occurs the first time I try to access a jsp
Can any one tell why this exception occurs the first time I try to
access a jsp. After the first time it doesn't occur. This happens only
on solaris platform.
Thanks,
Shankar.
Fri Jul 28 15:02:51 PDT 2000:<I> <ListenThread> Adding address:
192.168.0.36/192.168.0.36 to licensed client list
Fri Jul 28 15:02:51 PDT 2000:<I> <ServletContext-General> file: init
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> *.jsp: init
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> *.jsp: param
verbose initialized to: true
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> *.jsp: param
packagePrefix initialized to: jsp_servlet
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> *.jsp: param
compileCommand initialized to: /usr/bin/javac
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> *.jsp: param
srcCompiler initialized to weblogic.jspc
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> *.jsp: param
superclass initialized to null
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> *.jsp: param
workingDir initialized to: /space/shankar/weblogic/myserver/classfiles
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> *.jsp: param
pageCheckSeconds initialized to: 1
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> *.jsp:
initialization complete
Fri Jul 28 15:02:55 PDT 2000:<E> <ServletContext-General> Servlet failed
with ServletException
[AddToMap: pattern=/login.jsp class=jsp_servlet.login]
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at
javax.servlet.ServletException.<init>(ServletException.java:88)
at
weblogic.servlet.jsp.AddToMapException.<init>(AddToMapException.java:14)
at weblogic.servlet.JSPServlet.service(JSPServlet.java:118)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(Compiled Code)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(Compiled
Code)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(Compiled
Code)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(Compiled
Code)
at weblogic.socket.MuxableSocketHTTP.invokeServlet(Compiled
Code)
at weblogic.socket.MuxableSocketHTTP.execute(Compiled Code)
at weblogic.kernel.ExecuteThread.run(Compiled Code)
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> servletimages:
init
Try a different brand of discs. Try restarting your computer.
-
Sync my iphone calendar with MobileMe for the first time without deleting?
I never used iCal, I only us the calendar on my iphone to remember appointments. Now I just got MobileMe and I want my iphone calendar to sync with mobileme (obviously for the first time). But when I turn on MobileMe calendar sync on my iPhone, I get the message that if I save that setting, all my events will be deleted from my phone!
How can I start using MobileMe on my phone without losing all my events/appointments??
And what's the logic behind this behavior? I don't get it.childlost,
This is the expected behavior. When MobileMe Push is enabled on the iPhone, it replaces the existing information with what it finds on me.com.
I'd recommend following this guide for the initial setup: http://www.apple.com/mobileme/setup/iphone/mac.html
Hope this helps,
Raleigh -
After syncing with icloud for the first time, all my contacts disappeared
Recently for the first time I signed up for Icloud and tried to sync contacts with it, but after this procedure all my contacts disappeared from my iphone, i treid searching online for the solution but couldnt get back my contacts, when I logged in to icloud.com, even contacts list was empty. Any help regarding this will be appreciated.
I have had a similar problem, except all of my text messages are gone too! My contacts have slowly started to come back, but it appears that my most recently added contacts are gone, and my messages are also gone still.
-
Audio source chanes on its own to speaker or iphone. This happens both in my car and my jawbone headset. Anyone else experiencing this?
The problem is that you're using an uncertified lightning to 30-pin connector (the blue cable). If you purchase the 30-pin to lightning cable (either online, at an Apple store or an authorized dealer) it should work fine.
I have a 2011 Tuscon and tried the lightning to USB cable that came with the phone - no dice. Talked to my local Hyundai dealer and they don't have an eta on the Hyundai lightning cables (I'm sure it's in the works).
Lightning to 30-Pin Adapter (0.2M)
Part Number: MD824ZM/A
http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=48
$29 in the US store, $45 in Canada (yes, even though our dollar has been par for years) -
Is anyone else having issues with texting after the iOS8, with a iPhone 4s?
The messages app on my iPhone is not responding. I click on the message button and i get a white screen for 30 seconds and then goes back to the home screen.
Hello, cliffiapp4.
Thank you for visiting Apple Support Communities.
Here are the steps that I would recommend going through when experiencing this issue.
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding
http://support.apple.com/kb/TS3281
Cheers,
Jason H. -
Having issue with AppBuilder Launching the Android Simulator
When Trying to Launch to a Android Simulator, I can see the 2 DOS boxes appear and then disappear.
Not sure what is going on, as you can see AppBuilder states that it launched the Simulator.
So how is the Best way to Trouble shoot this.
Thank you for any Ideas.
I also noticed this in the app build container Console "Provider config was Empty"?
II wonder what I missed?Thank you for your reply I have gone through everything and able to start the AVD Manager
But the same results Does this Dos box give any clues to what I missed?
How is the best way to trouble shoot this???
Thank you -
Is anyone having issues with playback from the story line?
Just wondering if it's my hardware or maybe graphics card. FCP X 10.0.8 seems to not like to play back quick edits. Could it be the pro res files need an SSD drive to playback smoothly when edited clips are just a few frames long?
Mac Pro 2x2.8 quad core, 16 gig ram and ATI Radeon HD 5770. Shold the drives be in a raid?What you describe is definitely not normal.
FWIW, I find FCPX to be more responsive than legacy versions in nearly every area – except certain kinds of audio editing.
Skimming should be instantaneous in moving though a clip – as fast as you can move your mouse from left to right or the reverse. It's not like scrubbing where you click and drag; you just move the mouse.
JKL navigation as well as spacebar to start should be at least as fast as FCP7.
You didn't mention where your events and projects are stored. IMO, the ideal setup is for events and projects to be on a drive other than your start-uo. (More importantly, it's also the recommendation of instructors like Larry Jordan and Tom Wolsky.) You probably know that the start-up drive should probably have a minimum of 15% free.
If you've checked Activity Monitor and have run a speed test and saw good throughput, two other things you could consider are running OnyX to do kind of a general housecleaning… cleaning caches, fixing premissions, verifying preferences. And creating a new user account and testing FCP responsiveness from that account.
Good luck.
Russ -
Is anyone else having issues with suri on the 5s when the phone is locked?
I have mine disabled, but it still is opening suri when I'm tyring to utilize the finger print scanner. What can I do to fix this?
Where do you have yours disabled?
Do you have Settings>General>Passcode & Fingerprint and under Allow Access When Locked, Siri set to OFF?
If you have the above set to off, this is going to sound silly, but use a different finger and Siri will not activate when in locked mode. I think this might be a bug. -
What am I doing wrong. I am trying to connect to my home network??
ALSO: My iPhone can connect to other WiFi networks just fine, but not this one.
Maybe you are looking for
-
Mac Mini (Mid 2011) AirPlay to Apple TV
Hi, everyone. First, thanks for reading my post. My question is about the Mac Mini and the new AirPlay feature that comes with OS X Mountain Lion. I've got a Mac Mini that I use as my media center. It has all of my movies, music, photos, etc. I use m
-
G5, 2.7 using OSX10.4.11: I want to clone the hard drive. Instead of housing the new hard drive (during the cloning process) in an external case, could I simply install the new hard drive into an idle G5 that has no hard drive in it thus using the id
-
Multiline Check in Receiver Determination
Hi All, Can anyone explain me the exact functionality of the multiline checkbox in receiver determination. Lets say I have the following input message <node1> <value>21</value> </node1> <node1> <value>22</value> </node1> <node1>
-
R/3 Field name for "Number of Pipes" and "Length of Pipe" for SD Billing
Dear Gurus, I require the R3 tables and fields for "Number of pipes" and "length". These Fields are used in Billing Document Data: Items (As of 2.0B) (ZS2LIS_13_VDITM) for BI report. Your Help is greatly appritiated.
-
Sound issue after )X10.5.6 update
after updating to 5.5 i get one loud pop/crack sound when starting or wakeing my mac up from sleep. I am useing it with harman/kardon sound stick speakers Anyone had simler issues or no how to resolve this? Thank you Michael