I am having issues with loading gmail in my safari.when i open gmail in safaari it just shows loading but doesnot open. Neither it shows safari cannot display the files nor dere is any internet problems. I am confused what it is?

cannot browse gmail in safari

If your still having problems, or anyone else......
For future info, your in the wrong forum, your need the MBP area, this is the MacPRO area, no big deal, I can barely keep up with the M & B & P, etc...
Sounds like when it migrated over your old settings it may have gotten corrupted? It has been known to work if you were to just make another "Location" and just re-enter the information again and sometimes that will help. You might take it back to the store and see if it does it on their connection also. The silly person should have tested it first before letting you go.
Hope you got it fixed...

Similar Messages

  • I am having issues with my computer recognizing my phone when attached. I am trying to transfer pictures to my computer but it doesn't even see the phone.

    I am having issues with my computer recognizing my phone when attached. I am trying to transfer pictures to my computer but it doesn't even see the phone.

    skinaked101,
    Look no further help is here! I can understand the importance of being able to keep your pictures safe on your computer.
    Have you tried using different USB ports on your computer, as your fellow community member suggested?
    Visit http://www.verizonwireless.com/support/knowledge-base-97259/ for complete steps to transfer the pictures from your phone to computer.
    JohnB_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Having issues with one page of a website when viewed on the iPad?

    We recently created a 6 page website through Adobe Muse. When we view the published website on our desktop, everything seems to be working fine. However, when we view the website on our iPad, one of the pages (the "about us" page) seems to be "left aligned" while all the other pages seem to be "centered", which is the way we want it. All of our page properties are the same and I have checked for any objects or materials outside the white canvas. We cannot seem to figure out the issue in regarding the website on the iPad. Any thoughts? Thanks much!

    Hi,
    What is the site URL?
    Regards,
    Aish

  • Internet Explorer7 cannot display the Webpage in forms 10.1.2.3

    Hi all,
    I have installed forms 10.1.2.0.2 to my laptop under Windows Vista Home Premium and followed the following steps :
    1- changed virtual memory to (minimum of 2048 and maximum of 4096)
    2- I updated forms 10.1.2.0.2 it to forms 10.1.3 using pathch 3 (patch ID 5983622)
    3- I changed the application server Url in forms builder by choosing Edit, preferences, runtime and click on "Reset to default" button and added ?config=jpi at the end of the line.
    when i run the form I got the message "Internet Explorer cannot display the Webpage"
    when I called the link http://Computer_name:8889/forms/frmservlet?config=jpi
    I got a message asking me to allow downloading java plug-in 1.4.2 ( which I know that it is not certified with Vista), So i refused downloading and updated the formsweb.cfg file as Steve Cosner said in his thread Vista Jinitiator problem
    and added these new lines to the formsweb.cfg file:
    [[jdk15]]
    jpi_classid=clsid:CAFEEFAC-0015-0000-FFFF-ABCDEFFEDCBA
    jpi_codebase=http://java.sun.com/update/1.5.0/jinstall-1_5_0_12-windows-i586.cab#Version=1,5,0,12
    jpi_mimetype=application/x-java-applet;jpi-version=1.5.0_12
    jpi_download_page=http://java.sun.com/javase/downloads/index_jdk5.jsp
    baseHTML=basejpi.htm
    baseHTMLjinitiator=basejpi.htm
    baseHTMLjpi=basejpi.htm
    baseHTMLie=basejpi.htm
    When i run the form I got the same error message "internet Explorer cannot display the Webpage "
    Again I called the link : http://Computer_name:8889/forms/frmservlet?config=jpi
    then I got a message asking to allow loading and installing JRE 1.5.0_12 , and I allowed downloading and installation
    After all of this, the form doesn't run and I get the same message "Internet Explorer cannot display the Webpage "
    Is this a forms related problem or an Internet Explorer problem
    Please help
    Mostafa Abolaynain
    Edited by: Mostafa Abolaynain on Jun 5, 2009 12:06 AM

    jemar98 wrote:
    We have a custom application built alongside Oracle Ebusiness Suite 12.
    Launch a form from the Menu Navigator
    Click in any field in the form
    Focus does not change to the field that was clicked
    Focus can be retained by pressing any keyIs this issue with all custom forms or specific ones?
    Did you use the TEMPLATE.fmb file when building your custom forms?
    Can you find any errors in the JRE Console Window?
    Please obtain the FRD log file and see if you can capture more details about the error -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FRD+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Internet browser cannot display the website

    why some of  the website cannot display by safari on iphone4s?is there any restriction in one country to open a website?
    Message was edited by: samiebaby

    when im browsing in safari for almost 1hour or more, it suddenly stop and  not responding , and it states there that the safari browser cannot display the site. Is theres any problem with my OS? do you know why it happens to my iphone4s.

  • I have a ipad 1. I seem to be having a lot of connectivity issues. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop.

    I seem to be having a lot of connectivity issues my iPad. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop. It seems I have to turn it completely off and restart.
    Anyone had these issues?

    Settings > General > Reset > Reset network settings

  • TS1702 Renewed my subscription with the Sun app, was charged £0.69 but app won't load seem that I am not the only one having issue with this app. How can I claim my money back?

    Renewed my subscription with the Sun app, was charged £0.69 but app won't load seem that I am not the only one having issue with this app. How can I claim my money back?

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Having issues with loading pages with large web articles..

    I'm having issues with pages loading all the way when I read articles off of wikipedia. Mainly from pages that have tons and tons of text, but it doesn't make sense. The browser indicates that the page is loaded all the way, but when I make it half way down the page, everything becomes completely white. Like LITERALLY everything becomes white. This prevents me from reading any further down the page, even though I would force the page to scroll down all the way, that doesn't help one bit.
    Does anyone have a solution or a fix to this? I would like to continue reading my web articles, without being interrupted with these white pages/bugs.
    Post relates to: HP TouchPad (WiFi)

    Try clearing the cache for the web browser. While the browser is open, go up to Web/Preferences and choose "Clear cache".
    Also try rebooting the TouchPad via Device Info/Reset Options/Restart.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • I was having issues with firefox so I upgraded to firefox 4. I am connected to the internet but when I open firefox or even internet explorer it says Unable to connect problem loading page. Nothing will pull up!!! No help link or anything!!?

    I was having issues with firefox so I upgraded to firefox 4. I am connected to the internet but when I open firefox or even internet explorer it says Unable to connect problem loading page. Nothing will pull up!!!

    I don't know if you are still having the issue but if you are have you contacted your ISP? It sounds to me like it's more of a connectivity issue than a browser problem. I've dealt with similar things several times and in both cases it was something with the modem or an ISP setting.
    I'm also wondering if it could be a Wi-Fi issue. Can you log in to your router? (It varies by brand but you would go to a site such as http://192.168.10.1. That is for Trendnet. The information for yours should be in the documentation that came with it.)
    You should be able to get the router log in page to come up even if you can't connect to any websites. (Provided the network is set up correctly.)
    I also would double check your connection settings (if you're connecting over Wi-Fi) or your ethernet connection. (If you're connected directly to the modem and router.)
    Hopefully one of these suggestions will be helpful.

  • I'm having issues with my gmail accounts in Mail since I upgraded to OS X Mavericks. All the mails start downloading again! How do I correct this so that only the new mails in these accounts get downloaded?

    I'm having issues with my gmail accounts in Mail since I upgraded to OS X Mavericks. All the mails start downloading again! How do I correct this so that only the new mails in these accounts get downloaded?

    I'm having issues with my gmail accounts in Mail since I upgraded to OS X Mavericks. All the mails start downloading again! How do I correct this so that only the new mails in these accounts get downloaded?

  • Having issues with PC gaming and my Linksys AC1900 router! (What settings should I be using?)

    Well I recently purchased a linksys AC1900 for a better/faster connection with my internet. Sadly, I have been having issues with online gaming. I am attempting to play a blizzard game (Diablo 3) but its not letting my connect. I did a direct wired connection and it worked just perfect. However, I dont want to play in my garage...lol. Does anyone have any ideas what settings I should be using? It lets me connect to battlenet but when my character loads into the world I get disconnected. I tried opening ports, shutting off uPnP, and various other things. Is the the router or is it me? Someone please help!

    I got confused with your response. If you are still having the same challenge, make sure you have enough speed to play any online game. You may also try to reboot your PC and the router. If the result is the same, check if the firmware is up to date. You may try to manually update it on the Linksys Smart WiFi page. Here's how. Once accomplished, reset, reboot, and reconfigure the router. I hope this helps!

  • Having issues with getting SQL Server Express to start services and run.

    Good afternoon everyone,
    I have been working on a 2012 R2 server getting ready to move databases to new hardware.  I had SQL Server Express 2008 R2 running on this server with no issues.  I was handed another software package that ran SQL Express 2012 and had to for compatibility
    reasons.  I have had multiple versions run on Server 2012 before with no issues.  This time, not so lucky.  When the installer from the updated package put on SQL Express 2012 it completed with errors ( error log posted at the end of post) and
    would not allow me to run software.  I then tried the db that I had installed on 2008 R2 and it also gave the  same error as the 2012 version.  IN basic terms the required services attempted to start and shut back down again.  I have received
    Error 1068 about database handles and error %%945.   I know this db has plenty of space and the permissions were added for the Admin account to access both db's.  I then uninstalled both versions and tried again, with the same errors listed when
    I tried to start the services.     I am thinking that a clean install would fix the issue however I am not certain what files/folders/reg entries need to be deleted or modified.  I have researched all the errors I can find, however I am very
    new with SQL anything so I know I am missing something.   I also do not have an "E:" drive on this server (not sure why it is going there). Input would be very welcome as I am not certain where to go from here. 
    Thanks,
    Matt
    Error Log follows, server and domain names have been blacked out with ****.
    2015-04-15 11:57:55.16 Server      Microsoft SQL Server 2012 (SP1) - 11.0.3128.0 (X64) 
    Dec 28 2012 20:23:12 
    Copyright (c) Microsoft Corporation
    Express Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
    2015-04-15 11:57:55.16 Server      (c) Microsoft Corporation.
    2015-04-15 11:57:55.16 Server      All rights reserved.
    2015-04-15 11:57:55.16 Server      Server process ID is 4104.
    2015-04-15 11:57:55.16 Server      System Manufacturer: 'HP', System Model: 'ProLiant ML350p Gen8'.
    2015-04-15 11:57:55.16 Server      Authentication mode is WINDOWS-ONLY.
    2015-04-15 11:57:55.16 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Log\ERRORLOG'.
    2015-04-15 11:57:55.17 Server      The service account is 'NT AUTHORITY\LOCAL SERVICE'. This is an informational message; no user action is required.
    2015-04-15 11:57:55.17 Server      Registry startup parameters: 
    -d C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\master.mdf
    -e C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Log\ERRORLOG
    -l C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\mastlog.ldf
    2015-04-15 11:57:55.17 Server      Command Line Startup Parameters:
    -s "SQLEXPRESS"
    2015-04-15 11:57:55.48 Server      SQL Server detected 1 sockets with 6 cores per socket and 12 logical processors per socket, 12 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
    no user action is required.
    2015-04-15 11:57:55.48 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
    2015-04-15 11:57:55.48 Server      Detected 8157 MB of RAM. This is an informational message; no user action is required.
    2015-04-15 11:57:55.48 Server      Using conventional memory in the memory manager.
    2015-04-15 11:57:55.68 Server      This instance of SQL Server last reported using a process ID of 7840 at 4/15/2015 11:57:47 AM (local) 4/15/2015 3:57:47 PM (UTC). This is an informational message only; no user action is required.
    2015-04-15 11:57:55.68 Server      Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
    only. No user action is required.
    2015-04-15 11:57:55.69 Server      Using dynamic lock allocation.  Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node.  This is an informational message only.  No user action is required.
    2015-04-15 11:57:55.72 Server      Software Usage Metrics is disabled.
    2015-04-15 11:57:55.73 spid5s      Starting up database 'master'.
    2015-04-15 11:57:55.79 spid5s      20 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
    2015-04-15 11:57:55.79 spid5s      0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
    2015-04-15 11:57:55.80 Server      CLR version v4.0.30319 loaded.
    2015-04-15 11:57:55.86 spid5s      Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.
    2015-04-15 11:57:55.89 Server      Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
    2015-04-15 11:57:55.91 spid5s      SQL Server Audit is starting the audits. This is an informational message. No user action is required.
    2015-04-15 11:57:55.91 spid5s      SQL Server Audit has started the audits. This is an informational message. No user action is required.
    2015-04-15 11:57:55.94 spid5s      SQL Trace ID 1 was started by login "sa".
    2015-04-15 11:57:55.94 spid5s      Server name is '********\SQLEXPRESS'. This is an informational message only. No user action is required.
    2015-04-15 11:57:55.96 spid5s      Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Binn\ftimport.dll'.
    2015-04-15 11:57:55.96 spid5s      Starting up database 'msdb'.
    2015-04-15 11:57:55.96 spid9s      Starting up database 'mssqlsystemresource'.
    2015-04-15 11:57:55.96 spid5s      Error: 17204, Severity: 16, State: 1.
    2015-04-15 11:57:55.96 spid5s      FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBData.mdf for file number 1.  OS error: 3(The system cannot find the path specified.).
    2015-04-15 11:57:55.96 spid5s      Error: 5120, Severity: 16, State: 101.
    2015-04-15 11:57:55.96 spid5s      Unable to open the physical file "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBData.mdf". Operating system error 3: "3(The system cannot find the path specified.)".
    2015-04-15 11:57:55.96 spid5s      Error: 17207, Severity: 16, State: 1.
    2015-04-15 11:57:55.96 spid5s      FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf'.
    Diagnose and correct the operating system error, and retry the operation.
    2015-04-15 11:57:55.96 spid5s      File activation failure. The physical file name "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf" may be incorrect.
    2015-04-15 11:57:55.99 spid9s      The resource database build version is 11.00.3000. This is an informational message only. No user action is required.
    2015-04-15 11:57:56.02 spid12s     A self-generated certificate was successfully loaded for encryption.
    2015-04-15 11:57:56.03 spid12s     Server is listening on [ 'any' <ipv6> 53345].
    2015-04-15 11:57:56.03 spid12s     Server is listening on [ 'any' <ipv4> 53345].
    2015-04-15 11:57:56.03 spid12s     Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SQLEXPRESS ].
    2015-04-15 11:57:56.03 spid12s     Server named pipe provider is ready to accept connection on [ \\.\pipe\MSSQL$SQLEXPRESS\sql\query ].
    2015-04-15 11:57:56.04 spid12s     Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806.
    This is an informational message only. No user action is required.
    2015-04-15 11:57:56.04 Server      SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational
    message. No user action is required.
    2015-04-15 11:57:56.04 Server      The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/********.****.local:SQLEXPRESS ] for the SQL Server service. Windows return code: 0xffffffff, state: 53.
    Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been
    manually registered.
    2015-04-15 11:57:56.04 Server      The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/********.****.local:53345 ] for the SQL Server service. Windows return code: 0xffffffff, state: 53. Failure
    to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually
    registered.
    2015-04-15 11:57:56.09 spid9s      Starting up database 'model'.
    2015-04-15 11:57:56.10 spid9s      Error: 17204, Severity: 16, State: 1.
    2015-04-15 11:57:56.10 spid9s      FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\model.mdf for file number 1.  OS error: 3(The system cannot find the path specified.).
    2015-04-15 11:57:56.10 spid9s      Error: 5120, Severity: 16, State: 101.
    2015-04-15 11:57:56.10 spid9s      Unable to open the physical file "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\model.mdf". Operating system error 3: "3(The system cannot find the path specified.)".
    2015-04-15 11:57:56.10 spid9s      Error: 17207, Severity: 16, State: 1.
    2015-04-15 11:57:56.10 spid9s      FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\modellog.ldf'.
    Diagnose and correct the operating system error, and retry the operation.
    2015-04-15 11:57:56.10 spid9s      File activation failure. The physical file name "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\modellog.ldf" may be incorrect.
    2015-04-15 11:57:56.10 spid9s      Error: 945, Severity: 14, State: 2.
    2015-04-15 11:57:56.10 spid9s      Database 'model' cannot be opened due to inaccessible files or insufficient memory or disk space.  See the SQL Server errorlog for details.
    2015-04-15 11:57:56.10 spid9s      SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
    

    Hi HMLunger,
    Did you install the SQL Server instance successfully? If not, please help to post the summary and detail logs for analysis. By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
    However, if you fail to start SQL Server Express service after successfully installing SQL Server,
    you might have to change the paths of the files by running the following scripts from the command prompt. For more details, please review this similar
    thread.
    NET START MSSQL$SQLEXPRESS /f /T3608
    SQLCMD -S .\SQLEXPRESS
    ALTER DATABASE model MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
    ALTER DATABASE model MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
    go
    exit;
    ALTER DATABASE msdb MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
    ALTER DATABASE msdb MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
    NET STOP MSSQL$SQLEXPRESS
    In addition, you can follow the steps in this KB article to uninstall SQL Server.
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • Having issues with Surface Pro 3 downloading boot image over PXE

    Hi,
    We've recently started to buy the new Surface Pro 3 with the new USB 3.0 Gigabit Ethernet adapter and we have some issues deploying them through SCCM. Basically, with the Pro 2 and Fast Ethernet adapter we have no issue at all, of course the deployment is
    a bit longer than on any other computer, but it is still quite faster than the latest Surface.
    We have the new 8.13.414.2014 driver injected in the Win 8.1 boot image for the USB 3.0 Gigabit adapter and all the drivers assigned to the new Surface in SCCM.
    The problem occurs when we try to load the boot image after choosing PXE, it takes more than an hour to load it when it shouldn't take more than 5 minutes.
    I tried rolling back to the old driver (8.6.128.2013) and use the Fast Ethernet adapter, use the Fast Ethernet adapter with the new driver and use the new adapter with the old driver, but it's still slow in any case, so
    I'm pretty sure it has something to do with the new Surface and not the Ethernet adapter.
    Anyone have an idea what could be the problem here? Anyone having issues with Surface Pro 3 and SCCM 2012?

    I would imagine you have upgraded to R2, have you also applied KB2905002. 
    This hasn't got anything to do with the TFTP loading phase of the boot image.
    Similar thread to this can be found here:
    http://social.technet.microsoft.com/Forums/en-US/a6d80714-dc26-43db-a071-93eaee267122/surface-pro-2-surface-ethernet-adapter-super-slow-pxe?forum=configmanagergeneral
    I already asked in that thread the same question, but how about normal PCs that are connected to the same network segment as the Surface devices, do they boot slow also?

  • Having issues with Flash in Opera

    I have been having issues getting videos to work in my browser. I use Opera and it will not load anything Flash related. It gives me an error telling me to install the latest version of flash despite the fact that i have the latest version. If i load IE it loads videos with no issues. I have tried searching to find an answer to this issue with no succes. Seems like it may be a problem with Opera but i cant find anything related. I run AVG antivirus and the scan is clean. I also ran Malwarebytes which came up clean as well so i dont believe it to be a virus or anything of the sort. Any help would be appreciated.

    Download flash plugin for Opera:
    http://www.adobe.com/go/full_flashplayer_win

  • I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. What can I do?

    I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Maybe you are looking for