I am having problem dialing from my iphoe 5 but I can receive calls and 3G is working
I have an Iphone IOS 8.2 , occasionly like every couple of weeks I am not able to dial from my phone , however I ahve no proble receiving incoming calls and 3G works fine without any interruption. So to temporalrly solve the problem I move the sim card from my Ipone and isnert it in my Ipad activiate 3g on my ipad and do soem brwsing then I move the sim card back to my phone and problem fixed , I can dial again. I woluld like to know what could be causing this problem so I can fix it once and for all
Greetings samuelfrombamako,
Welcome to the Apple Support Communities!
I understand that you have been having a sporadic issue where you cannot make an outgoing call. Removing the SIM card is a good troubleshooting step, although you shouldn’t need to place it in your iPad. There are a couple of other troubleshooting steps I would suggest because this is an ongoing issue such as Reset Network Settings which are outlined in the attached article.
If you can't make or receive calls on your iPhone - Apple Support
Cheers,
Joe
Similar Messages
-
I can't make calls from my iPhone 4. But I can receive calls and browse the Internet on it.
I can't make calls from my iPhone 4 but I can receive calls and browse Internet.
Surprise!!!!!! Phone won't make and accept any calls :)))), mine works the same. Soft failure, did everything for 2 weeks.
-
i have the same problem in my iphone. i can receive call and talk and listen too otherwise no sound at all like ringer tone , on-off click soung , video-music song , game sound.
i have tried to clean the audio jack too but result is the same. Can any body help me please.No external sound or not sound at all - external or when using the earbuds?
Standard troubleshooting steps in order are; power the iPhone off and on, Reset by pressing and holding the Home key and Sleep/Wake or On/Off key simultaneously until you see the Apple logo and then release - ignoring the slide to turn off prompt when doing so, Restore.
i had it once before, restored the iPhone and it was solved, but i don't want to restore my iPhone every day.
Does this happen every day? If not, when was the last time this happened?
If you have sound when using the earbuds, another thing to try is insert the earbuds and start playing a song - making sure the sound can be heard with the earbuds. Without pausing the song, remove the earbuds.
If no sound is available with the speaker and a the troubleshooting steps do not resolve it or one of the steps does resolve it but the same occurs again, time to give AppleCare a call (800) 694-7466 or make an appointment at an Apple Store if there is one nearby. -
Hi I have an iphone4 that i bought from australia under a contract.I got it unlocked from there and now I am in India trying to use the phone but whenever I make a call it shows call failed. I can however receive calls and send/receive texts. ?? Please help
Hi I have an iphone4 that i bought from australia under a contract.I got it unlocked from there and now I am in India trying to use the phone but whenever I make a call it shows call failed. I can however receive calls and send/receive texts. ?? Please help
-
When receiving a call, my phone only vibrates once even if its on silent or not. I have checked all the settings and all appears ok. It works sometimes and doesn't other times. Does anyone know how this can be fixed?
ThanksMaybe your buzzer gets stuck when it vibrates? Try playing it by creating a custom vibration. Does it keep working properly then?
If that works, try setting up another vibration that should be played when someone calls you. -
When I try to call, the call always failed.
From a different phone, call your cellular carrier. They need to get involved.
-
I can't make calls with my iPhone 4 after I unlock it
If the device has not been hacked or jailbroken, try the following:
Settings > General > Reset > Reset Network Settings.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved. -
I can't call to a mobile number since yesterday, but still can receive call from the same number. I am using iphone 4s. Is there any setting error?
you have to make sure that CFWD Bridge Mode under the Line tab of the SPA9000 where the SPA400 is registered is set to ALL...include VMSP Bridge and XFER Bridge Mode as well..power cycle then check if you are still getting one-way audio
| isolate! isolate! isolate! | -
I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. -
I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems
Hi,
Apple's AirPrint only support specific models while using wired or wireless network connection.
Plugging a printer into a USB port of Apple base is not supported for AirPrint:
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
http://support.apple.com/kb/ht4356
There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
http://www.ecamm.com/mac/printopia/ -
My ipod jumps from one screen / app to another on it's own. Sometimes I can't unlock or even shut off. I've tried the reset, I've tried back up, even tried restoring to factory settings and is still having problem. Any ideas of what I can do.
When you still have the problem after restoring to factory defaults/new iPod then you very likely have a hardware problem and an appointment a th Genius Bar of an Apple store is in order.
-
having problems installing itunes on computer so I can sysc with iphone. had to download only then installed itunes. getting error trying to install AppleMobileDevice64.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Mobile Device Support entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or at least maintain the charge over longer periods of time? I have a dc adapter. thanks
You should be able to use the battery if you get a car type charger which recharges mobile devices.
The full size iPads use a 10-12W charger, whereas the mini uses a 5W charger. Many car chargers only supply 5W. But at 5W, the car charger should give you some extra time on your iPad. It would be best to use a 10-12W car charger.
Cheers, Tom -
Can any one please help me I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them. I have tried all restoring options but no use. please help me
The mic on my iPhone4 has just quit also. Similar symptoms to yours in that people I'm talking to hear only static or my voice very faintly. The voice/memo recorder also only really records static.
It happened suddenly and seemed to get better after a day or two but then went completely after another day.
I'm returning it to Vodafone New Zealand shortly but will have to wait 5-10 days for a replacement. There are NO Apple accredited means to speed this procedure up in NZ.
We don't even have a single physical Apple Store where you could walk in and talk to a Genius. -
My iPod Touch (3rd Gen) is having problems with the touch screen being unresponsive, too responsive, freezing and constantly resizing. It varies between not responding when I tap the screen and acting as if I double-tap or tap and hold when I tap. Every so often it freezes for a minute or so and then comes back. The scren is constantly changing sizes too such that I often can't see most of the top status bar or other edges. This makes typing almost impossible, ruins most games and generally makes everything difficult, but otherwise the iPod is working correctly. Powering off, shutting down apps, letting it sit have not worked. This has happened once before months ago, but the issue resolved itself somehow. Is this a common problem? Is there a fix?
Try this for the freezing
http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
Or if they don't work put it into recovery mode
See here
http://www.apple.com/support/ipodtouch/assistant/restore/
Then restore
http://support.apple.com/kb/HT1414
Maybe you are looking for
-
My ipad mini did not have a passcode set. After I installed ios7, it asked me for a passcode, I couldn't get past that request. Naturally, my ipad mini is now disabled. I have read how to restore a disabled ipad, but I'm afraid if I try it I might wi
-
Wrong query is getting generated in WHERE NOT EXISTS with group by clause
Query is getting generated wrongly in where not exists section when i use group by function.Please prvoide me any clue to over come the problem. /* DETECTION_STRATEGY = NOT_EXISTS */ INSERT /*+ APPEND */ INTO STG_ETL.I$_DCMT_TIMEZONE_LOOKUP TZ_O
-
Lightswitch HTML Client - beforeApplyChanges only fires once
Hi, I have a standard Add/Edit screen created by Visual Studio with the standard save button in the top right-hand corner. In my beforeApplyChanges function I have the following code: if (!screen.OrderAllocation.OfflineAdType) { screen.findContentIte
-
Top rows not accessible in Numbers for iOS
i imported a spreadsheet from Excel. It has about 2500 rows. At first it worked correctly but after adding some more rows and making some other changes i can no longer scroll to rows above 628. They appear with a gray background if I drag the spreads
-
New Itunes is not configured well, it looks like. It kept insisting that I should quit Itunes app, whereas it was not open at all. There is no way to escape, so I just force-quit the Installer. Not good.