I am having problem while using ms word with anjal( OS X Lion 10.7.5 (11G63))

i am having problem while using ms word with anjal is not working properly but its working in facebook and other areas.i need and its very important to using tamil fonts for my job.can anyone help me out from this problem.
thanking you
by
moses

Those who are knowledgable in this area (myself not among them) say that Word's support for Asian languages is faulty. The best word processor for that use is "Mellel."

Similar Messages

AUDIO PROBLEM WHILE USING OR ALONG WITH WEBCAM

Hi friends,
SUBJECT : AUDIO PROBLEM WHILE USING OR ALONG WITH WEBCAM
I'm not getting any sound while using web-cam.
I tried recording my voice , and played.. i can see my video but audio
Do we have any settings where i need to cross-check to make sure that everything being turned-on ?
My laptop details:-
HP Pavilion dv6 laptop
Operating system Installed - Windows 7
Can someone help me with this?
Thanks
kiran

Hi,
not sure if coincidence or the same question, but the same question got asked internally. The seeded option is required to get the OJSP filter installed. Here's the internal response
ADF View integration with MDS not configured
In web.xml, you need to have mds-ojsp intg enabled to load jspx base + customizations from MDS. In your web project in Jdev, go to ADFv project properties and select “Seeded customization” property. It would enable mds-jsp engine configuration in web.xml. If you want to use user personalization feature at runtime, you would need to select “User customization” property as well which would enable ADFv change persistence config in web.xml.
Warning: Some of the metadata under ... is packaged as part of both WAR and MAR. This metadata cannot be accessed from WAR using MDS.
For these two packages, you are including the files in both WAR & MAR. This warning conveys that since these base files are being put in MAR, at runtime they would be read from mds repository & not from WAR.
Frank

Having problem while using Stacked Column Chart.

Hi,
my result set is as below
STAGE OPERATION
TOTAL PCS
1 SIDE SEAM
6714
2 BIND BOTTOM
4522
2 SLEEVE ATTACH
6105
3 BIND TOP(E/N)
3781
5 SLEEVE HEM
3277
6 BIND TACK-2
1173
6 TACK-2
1277
6 TACK-4
268
I need to display it on the screen by using stacked column chart. I mean XAxis as "STAGE" YAxis as "TOTAL PCS" and "OPERATION" as series. I used DataBIndCrossTable as
chProd.DataBindCrossTable(dtView, "OPERATION", "STAGE", "TOTAL PCS", "Label=TOTAL PCS");
But, the results in the chart is displaying it in the first STAGE it self. I mean xaxis value 1 has all the yaxis value.
Can anyone please help me to get the results as first image?
I'm anable to attach the related images here.
Thanks in advance.
Regrds,
Rajesh.

Got the answer.
Just added
chProd.AlignDataPointsByAxisLabel();
Regards,
Rajesh

Problem while using cewolf library with jsf jboss.

Hi Guys,
I am trying to use cewolf library to generate graphs in my web application based on jsf. But I am getting the following exception.
I have pointed down that cewolf. jar file is causing the problem.
javax.servlet.ServletException: #{LoginBean.validateUser}: javax.faces.el.EvaluationException: javax.ejb.NoSuchObjectLocalException: Object Not Found ; CausedByException is:
     Receive timed out
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:209)
     org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
root cause
javax.faces.FacesException: #{LoginBean.validateUser}: javax.faces.el.EvaluationException: javax.ejb.NoSuchObjectLocalException: Object Not Found ; CausedByException is:
     Receive timed out
     com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:78)
     javax.faces.component.UICommand.broadcast(UICommand.java:312)
     javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267)
     javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381)
     com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:75)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
     org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
And this login pages does not at all uses the cewolf library.

Hello, Reena
Your process flow seems to be correct in term of getting/freeing memory.
Following error
The problem occurs after executing the procedure for 5000 records and I get the error
ORA-04031: unable to allocate 4176 bytes of shared memory ("shared pool","unknown object","sga
heap","library cache")may be caused by memory leaks in xdk or memory fragmentation(due to get/free memory cycle)
To find out if this is an memory leak issue you could try to monitor V$SGASTAT from one session while running your batch process in another session.
To prevent (or lower its impact) fragmentation issues try to PIN objects, and adjust java_pool_size and shared_pool_reserved_size.
Anyway, counsult your Oracle DBA.
Oracle version 8.1.7.0.0I think, you should apply database patch first of all. The latest one (8.1.7.4.x) could be accured from Metalink.

Error while using MS Word with BI Publisher

Hi All,
I am working on XML publisher while opening the fields in the designed RTF it is saying the error like
"Automation error,Unspecified error".
Please suggest me on this.
Thanks,
Surya

XP:
Just rename the file MSComctlLib.exd in 'C:\Documents and Settings\<YOUR USER NAME>\Application Data\Microsoft\forms' to MSComctlLib.exd.bak.
The file MSComctlLib.exd will be recreated when you start working in BIP add in from word.
win 7:
Back up MSComctlLib.exd
Run command prompt as Admin
For 64-bit operating systems, type the following:
Regsvr32 "C:\Windows\SysWOW64\MSCOMCTL.OCX"
For 32-bit operating systems, type the following:
Regsvr32 "C:\Windows\System32\MSCOMCTL.OCX"
Restart.

Problem while using PrepStmt.executeBach with Weblogic 6.0sp1 and

- I'm getting the same error when I use WLS 6.0 SP1 & thin driver. I'm not
getting this error when I use thin driver without WLS.
- This is definitely a bug in WLS. As a workaround put classes.zip {that
comes with oracle installation} before weblogic.jar in your classpath. This
way, classloader will load the oracle supplied classes & everything will
work smoothly
Manav
"Joseph Weinstein" <[email protected]> wrote in message
news:[email protected]...
>
>
Ruta wrote:
Hi Joe
I tried using a java standlaone program using prep stmts and oracle thin
driver
and it works just fine.
So is this a bug with Weblogic? Finally connection pooling isapplication server's
responsibility, isnt it..
I am inlcined to conclude this coz connection pooling works fine withStatement.executeBatch()
but not with prepStatement.executeBatch()
How do I resolve this now.
Thanks
Ruta
...Does it not release the connectionOk. Now let me see the JDBC code example. I'll see what's up.
Joe
Joseph Weinstein <[email protected]> wrote:
The first thing you should do is to reduce the problem to the simplest
form.
Write a tiny standalone program that just uses the thin driver
directly,
and repeats the code you are trying to run. This will eliminateWebLogic
from the equation and see if it's an Oracle-only bug.
Joe
Ruta wrote:
Hi,
I am trying to do multiple inserts in a table using the
PreparedStatement
of JDBC2.0.
I am using a TxDataSource of Weblogic server with a thin driver
oracle
pool. I
am using the driver classes that come with the weblogic.jar.
The problem is as follows:
I can manage to succesfully do the executeBatch a few
times..Interestingly
it
executes as many no. of times as the Initial capacity(not even maxcapacity) of
my connection pool.
Then it gives me the following error:
java.sql.SQLException: java.sql.SQLException: Missing IN or OUT
parameter
at index::
1
at
weblogic.jdbc.rmi.SerialStatement.executeBatch(SerialStatement.java:394)
atcom.equitable.acs.common.ACSCtrlBean.saveSDECData(ACSCtrlBean.java:147)
atcom.equitable.acs.common.ACSCtrlBeanImpl.saveSDECData(ACSCtrlBeanImpl.java:1
10)
atcom.equitable.acs.common.ACSCtrlBeanEOImpl.saveSDECData(ACSCtrlBeanEOImpl.ja
va:30)
atcom.equitable.acs.common.ACSCtrlBeanEOImpl_WLSkel.invoke(ACSCtrlBeanEOImpl_W
LSkel.java:133)
atweblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
atweblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java
:128)
atweblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
atweblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.
java:118)
atweblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:1
7)
atweblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
This Oracle error has error code 17041.. I could not find more infoon it, even
from the Oracle site.
I conclude that the connections are not getting relesed.
But i ahve written
con.close(); even
con=null; (out of desparation :) )
but still the connection is not released.
I am getting the connection in the saveSDECData method
I need to fix thsi problem ASAP..Any Help/Comments will be
appreciated..
Finally the most interesting part is :
executeBatch works perfectly fine with the Statement object..
so probably the culprit is the PreparedStatement implementation ofOracle..Can
anybody validate this pls
Regards
Ruta--
PS: Folks: BEA WebLogic is expanding rapidly, with both entry andadvanced
positions
for people who want to work with Java, XML, SOAP and E-Commerceinfrastructure
products.
We have jobs at Nashua NH, Liberty Corner NJ, San Francisco and SanJose
CA.
Send resumes to [email protected]
PS: Folks: BEA WebLogic is expanding rapidly, with both entry and advancedpositions
for people who want to work with Java, XML, SOAP and E-Commerceinfrastructure products.
We have jobs at Nashua NH, Liberty Corner NJ, San Francisco and San JoseCA.
Send resumes to [email protected]

Problem while using reply all with non english sen...

My company recently decided to also inlcude the chinese name in the e-mail address.
When the directory is updated, I face some difficulities when replying mail.
There are some e-mail addresses are not recognized properly and resulted in Nokia
Mail for Exchange complaints that some e-mail address are not valid.
It seems the problem is not always true for every Chinese e-mail address.
It sounds to me that it might be a problem of the e-mail adress length or the
e-mail address with Chinese name are interpreted incorrectly.
I hope that Nokia can look into the said issue.
Thanks a lot!

My company recently decided to also inlcude the chinese name in the e-mail address.
When the directory is updated, I face some difficulities when replying mail.
There are some e-mail addresses are not recognized properly and resulted in Nokia
Mail for Exchange complaints that some e-mail address are not valid.
It seems the problem is not always true for every Chinese e-mail address.
It sounds to me that it might be a problem of the e-mail adress length or the
e-mail address with Chinese name are interpreted incorrectly.
I hope that Nokia can look into the said issue.
Thanks a lot!

Problem while using camera connetor and Sony DSC-M1

Dear all
My digital Camera Sony DSC-M1 is able to take pictures and take video into mpeg4 format .
this is the revirew of this camera
http://www.steves-digicams.com/2004_reviews/m1.html
However, I got a problem while using this camera with iPod +Camera connector.
When I plug this camera into camera connector , ipod will transfer all photo from the camera , but do nothing with the video.
I guess that problem is the video file is not inside the "/DCIM" folder
All video file ( *.mp4 ) are all in the folder named " /MP_ROOT/101MNV01/ "
Can anyone help me how to make this sync from camera to ipod automatically both photo and video ?
This problem also bother me while I am using iPhoto to transfer the file when I was home .
pls , help me , thanks a lot

Hi there, I'm having exactly the same problem. Have you found out how to do it?

Having problems converting pdf to word. I'm not able to convert the file, what do I need to do?

having problems converting pdf to word. I'm not able to convert the file, what do I need to do?

Hi prates77,
I'm sorry to hear that you're having trouble converting files. Are you receiving the conversion error regardless of the file that you try to convert? Does the error occur whether you use the web interface, or convert via Reader? And an odd question: how many files do you have stored in your Acrobat.com account? We have seen reports of this error when there are a large number of files stored in the root folder of your Acrobat.com account.
I look forward to hearing back from you.
Best,
Sara

Hello i am rajesh i am having problem while conveting other files into pdf format please help me

i am rajesh i am having problem while converting other files into acrobat format please help me

Hello Rajesh,
I'm sorry to hear you're having trouble. Are you using Acrobat.com to convert your files to PDF? Please let me know where you are having trouble and I will do my best to help you convert your files. For your reference, here is a list of filetypes that can be converted to PDF online with Acrobat.com:
http://kb2.adobe.com/cps/524/cpsid_52456.html#Create%20PDF
Best,
Rebecca

Problem while using h:selectOneMenu tag

Hello All,
I am facing a problem while using the <h:selectOneMenu in my JSP.
My requirement is as below,
I am having a list of manager in the select box.
User will select any of the manager and click a command link to assign the manager.
On click of this command link backerbean method should be invoked.
My problem is,
I am able to display the list box without any problem.
But Once I select any value from the list box the command link is not working.
That is click on the command link is not invoking the backer bean method.
My code look as below,
JSP
<td>
<h:selectOneMenu value="#pc_EmployeeDetailsView.assignedMgrPositionId}" id="assignedMgrPositionId" style="width: 170px">
<f:selectItems value="#{pc_EmployeeDetailsView.managerList}" />
</h:selectOneMenu>
</td><td>�</td>
<td><h:commandLink action="#pc_EmployeeDetailsView.assignManager}" onmousedown="setEditAction('assign');">
<h:outputText value="Assign"></h:outputText>
</h:commandLink></td>Backer Bean
 SelectItem managerSelectItem = new SelectItem("0","Select Manager");
 ArrayList managerSelectItemList = new ArrayList();
 managerSelectItemList.add(managerSelectItem);
 int managerListSize = managerSearchList.size();
 for (int i=0; i<managerListSize; i++) {
 Employee manager = (Employee) managerSearchList.get(i);
 managerSelectItem = new SelectItem(StringUtils.isNotEmpty(manager.getOrgInfo().getPositionNumber())?manager.getOrgInfo().getPositionNumber():"",StringUtils.isNotEmpty(manager.getFullDisplayName())?manager.getFullDisplayName():"");
 managerSelectItemList.add(managerSelectItem);
 setManagerList(managerSelectItemList);Please help me on this.
Thanks In Advance

I have solved this problem by putting the list in portlet session and allowing the get method to get the SelectItem from the session

Problem while using struts 1.3.8

Hi All,
I have some problem while using struts 1.3.8 in my application.
I am using OC4J 10.1.2.0.2, my simple coding is follows:
<%@ page contentType="text/html;charset=utf-8"%>
<%@ taglib uri="/WEB-INF/tlds/struts-tiles.tld" prefix="tiles"%>
<%@ taglib uri="/WEB-INF/tlds/struts-bean.tld" prefix="bean"%>
<%@ taglib uri="/WEB-INF/tlds/struts-html.tld" prefix="html"%>
<%@ taglib uri="/WEB-INF/tlds/struts-logic.tld" prefix="logic"%>
<html:xhtml />
<html:form action="<action page>" method="POST" enctype="multipart/form-data" >

 <label for="Subject" >* Subject:</label>
 <html:text size="40" property="subject" />


 <label for="upload" >Attachment:</label>
 <html:file size="40" property="attachmentFile" />


 <html:submit />
after clicking my the submit button in the server console i m getting
JAAS-OC4J: JAZNFilter.doFilter - unable to find the current servlet
javax.servlet.ServletException: JAAS-OC4J: JAZNFilter.doFilter - unable to find the current servlet
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:222)
at org.apache.struts.tiles.commands.TilesPreProcessor.doForward(TilesPreProcessor.java:260)
at org.apache.struts.tiles.commands.TilesPreProcessor.execute(TilesPreProcessor.java:217)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:462)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at com.ed.ecomm.edcore.web.filters.SecurityFilter.doFilter(SecurityFilter.java:196)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at com.ed.ecomm.edcore.web.filters.MonitoringFilter.doFilter(MonitoringFilter.java:138)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at com.ed.ecomm.edcore.web.filters.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:92)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
further i investigate and i removed the "enctype=multipart/form-data" from the form attribute its working fine..
but without using this attribute struts doesn't support the "upload" i.e, form file... its throwing another exeception..
could you anyone please let me know whether i can change my OC4J server version of anything need to do..
many thanks in advance

I'm having the same exact problem. Any ideas?
Schema sfactory;
Schema schema;
sfactory = SchemaFactory.newInstance(XMLConstants.W3C_XML_SCHEMA_NS_URI);
ErrorHandler eHandler = new MyErrorHandler();
sfactory.setErrorHandler(eHandler);
LSResourceResolver lsrResolver = new MyLSResourceResolver();
sfactory.setResourceResolver(lsrResolver);
schema = sfactory.newSchema(new File(argv[1]));The last line gives me NullPointerException. I know the file (argv[1]) exists and can be read because I can print it with a BufferedReader.

HT1473 Im having problem while transferring songs from PC to Ipod. Ive followed all steps 'File Add to Library' but i cant find songs in my ipod. Ive also synced the ipod and backup as well but still same. what to do?

Im having problem while transferring songs from PC to Ipod. Ive followed all steps 'File<Add to Library' but i cant find songs in my ipod. Ive also synced the ipod and backup as well but still same. what to do?

Try:
iTunes: Finding lost media and downloads
iTunes: How to re-create your iTunes library and playlists
Next try:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Also:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Having problem in using RUN_PRODUCT in oracle apps 11.0.3

I am having problem in using RUN_PRODUCT in oracle apps 11.0.3. Error in oracle apps is
FRM-40733 PL/SQL built-in RUN_PRODUCT failed
What could be the possible cause for this error ?

Hi again;
I found this please also check this:
Price List Migration from 11.0.3 to 11.5.10/R12.
Regard
Helios

Problem while using trigger from line of 6534

I have faced some problems while using triggering with 6534. They are listed below. Please provide solution me.
1. ) i was using pattern input with triggering(buffered) in which i am using the example given in library buffered pattern input-triggered.vi
Now i am using port 0 to take input. From line 0 of port 2 i want to generate a pulse which can trigger the operation & start acquisition. For that i am using write to single line.vi . My DPULL is open so bydefault the line will be at low level & by vi i will make it high which will trigger the operation.
In normal condition if we use write to a single line.vi it will write the given status on that line within a fraction of second and abort execution. But when i am usin
g it for trigger in following manner, it did not work.
First i started the VI buffered pattern input-triggered.vi.I have configured the start trigger with leading edge trigger. I have set the time limit properly.Synchronous operation is set at the front panel of vi.
Now if start the write to a single line.vi to give start trigger, nether it triggered the operation,nor it abort execution of single line write vi.When time out occured in triggered vi, then both vis stopped simultaneously. Why this happened?
2.) Similar problem i faced when i wanted to perform the change detection.vi Port 0 is configured for input.Line 1 to 7 are fixed with some status by connecting them to Vcc or GND. I have connected port 0 line 0 with port 2 line 0. So when i change status of line 0 of port 2 change detection should be occured o port 0. i am changing the status of line 0 of port 2 by write to a single line.vi But here i faced same problem as first that it was not writing to port 0 line 0. And bo
th process stopped when time limit occured in change detection vi.
So what can be the problem? Please help me.

Hi Vishal,
1) You should check to see that when you are writting a static 1 to line 0 you see a pulse high. You should also make sure that you wire this line to the STARTTRIG for group 0.
2) If you solve question 1 you will also have question 2 solved.
It might be helpful to create a program that configures both programs (pattern I/O on port 0 and static I/O on port 2) in the same program and then starts both groups. I would do a little testing to see exactly what signals you do or do not see.
Ron

I am having problem while using ms word with anjal( OS X Lion 10.7.5 (11G63))

Similar Messages

Maybe you are looking for