I am having problems adding files to my external hard drive. Can anyone help me?

I can't add files to my external hard drive from my computer. I keep getting a message saying that the hard drive can't be modified. I've added files to it before, I'm not sure why it's not working now. I looked at the hard drive information and it says that it is set to read only. Does anyone know how to change that or what I should do? Thanks.

Odd, it seems. In the Finder "Get Info" display, you are seeing something like this?
Click the "Details" triangle and then the little padlock, and you should be able to change the permissions. Click the lock when you are done and close the Info window.

Similar Messages

Problems copying files from an external hard drive to MacBook (error code 36)

A little while ago I backed up some files on my iMac to an external hard drive (formatted in the Mac format). These were primarily office documents (PDF files, Microsoft Office) and some photos. The documents had orignally been copied to my iMac from a PC (via USB), whilst the photos were imported directly to the iMac. Having brought a MacBook Pro recently, I've been attempting to copy the data over. Unfortunately, I keep getting error code 36 when it attempts to copy the files over. I've tried skipping some of the files it gets stuck on, but it keeps finding more. This also happens when I am just trying to copy over a folder of photos. Another unusual thing that I noticed is that when I try to copy a folder containing just under 300 files, when it attempts to copy it says it is trying to write 1,500+ files... which I don't quite understand.
I've run the disk utility tool to check the hard drive, but it says it's fine. Prior to copying the data over to the external hard drive in the first place, it had been freshly formatted. Unfortunately, since this was the backup disk, I kinda need to save these files!
Does anyone know of any solutions out there that could help?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Click the Clear Display icon in the toolbar. Try the action again. Post any messages that appear in the Console window – the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Having problems making a Professional QualityDVD... Can anyone help? Thanks

Ok, I have a Standard DV 3:2 NTSC (16x9 Anamorphic) movie that I want to put on DVD for display on TV.
I started by dropping the entire 16x9 Anamorphic movie on to a regular 3:2 timeline being that I want that letterbox look.
Next I Exported from Final Cut using Quicktime Conversion 720x480 - 4:3 - No Preserve. Everything was fine at that point.
Next, I tried to burn the movie in DVD Studio Pro, but it did not except the .mov format, so I went to iDVD and burned it at Pro Quality - Standard 4:3.
This is where the problems began. The movie was horrible blurry & interlaced when any camera movement took place.
How can I export my movie from final cut pro so that the 3:2 Anamorphic can be viewed with the letter box look, and I can use DVD Studio Pro, and have it not be interlaced like it was in iDVD?
In general, how do the Pros export theres movies for DVD, so that they look great?
Thanks
PS... I am using the most recent versions of all the above softwares

Thanks for the tutorials... I read through them, and now I have figured out what has been driving me crazy for 6 months now...
Big Question? Is it possible to export a 16x9 Anamorphic movie with larger letterbox on top and bottom of picture without cropping the image? I want more than the letterbox that is there after the regular export. I also want to use DVD Studio Pro, and not iDVD, but everything out of Quicktime Compression does not work with DVD Studio Pro.
With more letterboxingit looks more cinematic, and I actually achieved this look once, only with horrible interlacing on camera movement. I achieved this look, by dropping my 3:2 16x9 Anamorphic DV Movie onto a 4:3 timeline and exporting it with quicktime conversion 720x480 - 4:3 without using preserve letterbox. I had to burn the DVD after doing this with iDVD, because DVD Studio Pro did not support the file. The look was exactly what I was looking for, but the video had horrible interlacing on camera movement.
So in general, there only one way to export 16x9 Anamorphic movies to display on a TV? The letterboxing is not much, and its looks super videoish to me. With more letterboxing, it looks great on the TV.
Please let me know what my options are, or if I should just go with the larger picture, and small letterboxing on top and bottom that is achieved by just dropping the 16:9 Anamorphic movie onto a 3:2 timeline and exporting. What do most indie filmmakers exporting DV movies onto DVD for festivals do?
Your help is very appreciated, as this has been driving me crazy for a long time.
Frankie
PS... What is it that Quicktime Conversion did that made it more letterboxed? Was it distorting the image at all? It did not look that way. It looked like the letterboxing on a lot of professional DVD's that shot on film.
Message was edited by: Frankiejmovies
Message was edited by: Frankiejmovies

Bought a MBA and am trying to keep iTunes files on an external hard drive. Having problems.

Hi, I bought a MBA 13" and want to keep my iTunes files on an external hard drive to save space.However, I keep running into problems. I can't get the iTunes Media folder to stay on the folder in my external hard drive. Whenever I unplug it, regardless if iTunes is open or not, it changes back to the media file on the MBA. I tried renaming the media folder and deleting it, but the computer just makes another if I do that and then ends up deleting my whole library, forcing me to load it all back from my hard drive. Can anyone help me out on this? Thanks.

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

Hi, since i put some mp4 video or DVD files on my external hard drives final cut prox won't recognize my hard drives, i move all the video files and the problem still exist. somebody have the solution

Hi, since i put some mp4 video or DVD files on my external hard drives final cut prox won't recognize my hard drives, i move all the video files and the problem still exist. somebody have the solution

Did the back and forth between PC and Mac file systems screw up my files somehow?
Yes. Unfortunately the move has almost certainly caused the loss of the resource data that would have been (invisibly) attached to those files.
By adding a specific .mov extension after the fact you will have helped the Mac correctly identify the file type / asscoiations but also significantly you will have physically changed the filename eg from "clip" to "clip.mov". This means that when you come to reconnect the media in FCP , then FCP will be looking for files that no longer exist at the given path eg when specifically looking for our example clip called "clip" of course it won't find it.
Try this as a test... first remove the ".mov" extension from one or more of the clips, select those clips and press Cmd-Opt-I to open an Info window for the selection. You'll see an "Open with:" popup and in that popup you should choose QuickTime Player (if its a Unix Executable then it will initially list Terminal as the appropriate app, you have to choose Other... then in the open dialog choose Enable > All Applications and then navigate to and select the Quicktime Player app as the appropriate app). After you've done that restart FCP and see if you can now reconnect to those clips.

I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files. The external hard drive is a Western Digital "My Book Live" 2 TB. How do I solve problem?

I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files. The external hard drive is a Western Digital "My Book Live" 2 TB. How do I solve problem?

I also had problem accessing my WD MyBookLive after upgrading to Maverick.
To resolve the problem, I used Connect To Server (Cmd K) to specify the IP address.
Then I enter a user id and password I created in the MyBookLive.
You can also verify that you have admin access to the MyBookLive using Safari or Chrome.
Just enter the MyBookLive IP address as the URL.

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?

I created a new itunes, but when i add the music i added it from my external hard drive by accident, so when i disconnect it and wish to play music without having it connected, obviously it asks me to located my songs, i dont want to locate each song help

i created a new itunes, but when i add the music i added it from my external hard drive by accident, so when i disconnect it and wish to play music without having it connected, obviously it asks me to located my songs, i dont want to locate each song and i dont want to have to add all my music again, is there anyway of changing the location to a new folder all at once? for example, if it is my computer/harddrive/music/.... can i change it to mydocuments/musis/...
and having the exact same music folder so all the further directions are accurate?
thanks
please i need help

pass the music on your external hard drive to the computer then drag the to Itunes

I'm living in Iran and I have an ip address for VPN but I'm having problem in setting it up any one knows can anyone tell me what to do? It works perfectly on my laptop

I'm living in Iran and I have an ip address for VPN but I'm having problem in setting it up any one knows can anyone tell me what to do? It works perfectly on my laptop

Try here:
iTunes Store: My credit card's security code or zip code does not match my bank's records
Then try contacting iTunes
Apple - Support - iTunes - Contact Us

I get error 8062 when trying to copy files from one external hard drive to another. It starts out copying files, but after 10 minutes or so it stops and I get the error 8062. The hard drive tech support says the problem is in my Macbook Air.

I cannot copy my doc and photos and videos from one external hard drive to a second external hard drive -- both plugged in to my MacBook Air -- I get Error 8062 and the copying (which seemed to be going on for 10 minutes) stops and nothing gets copied.
As any Macbook Air owner knows, there is SO LITTLE storage capacity on the computer that you have to back up big files onto an external hard drive to avoid getting the other annoying error that says you have no more memory/storage capacity/whatever the proper term is, and you cannot use the computer.
Backstory: Before this error cropped up, I had backed up lots of files to an external drive and then removed them from my computer. But then the external hard drive got corrupted and I could not access my entire photo library. Had to pay $850 to Kroll Ontrack to recover those files. I have now bought 2 new external 1 Terrabyte hard drives as protection against another such disaster. BUT I cannot copy the files from the first hard drive where all my reovered files now sit, to another backup hard drive.
Feeling vulnerable. Please help.
SusaninNY

From the menu bar, select
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Safe Mode and test.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

I need to do a clean install of maverick on my 2010 mbp what disk do i use and how do i move certain files from an external hard drive

I want to do a clean install of maverick on my 2010 mbp. I need to know what disk to use and also how i take certain files off my external hard drive and put on my computer. When I was having problems with my airport they did a clean install and they pulled files of my time machine.   however they forgot to put the partition back in for a windows side. Originally I had Parellels on my computer. After my external hard drive got corrupted i called apple and they fixed the problem but didn't have me set up the time machine except for the external hard drive. Now my only back up is from the external not from the laptop.    I am not sure how to do any of this. I am not computer savvy...PLEASE I NEED HELP>

First, you need to make a backup of your MBP onto your external drive. I suggest you start by cloning your MBP drive to the external drive:
Clone Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
This clone is fully bootable and also contains a clone of your Recovery HD.
Second, you need to do a clean install of OS X onto your MBP as follows:
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
This should accomplish your goals. You will have a clean install of OS X on your MBP and a bootable clone of your old system and all your files on the external drive.

Importing .mxf Files from an external hard drive...

Any advice or tips would be greatly appreciated. My problem comes close to others discussed, but I haven't been able to find a duplicate post. And I apologize for the length; I just want to give you as much info. as possible (I also put details in my signature) to help you help me.
I shot a short film using Panasonic's HVX200 camera, filming in HD 720p/24p, and downloaded each P2 card through a PC laptop into a LaCie Brick external hard drive. I was originally planning on editing the footage with Adobe Premiere Pro 2.0, but became frustrated with how much trouble it was having handling the .mxf files. Assured by Apple salespeople that FCP 5 would have no problem importing the footage from an external hard drive, I purchased the computer described in my signature.
Now I know that FCP/Apple only supports importing footage from the P2 card directly, and not from an external hard drive. A representative from ProMax.com was able to help me out, however. First, he had me copy the footage files onto my Mac internal drive from the external hard drive. Then, he had me select IMPORT -> PANASONIC P2. Then, I was to highlight the CONTENTS folder and import away. And it worked... sort of.
There are two major problems: 1) During this transfer, not all of the footage is making it across. I import it, and then get the much-talked about "one or more P2 clips failed to import; probable incomplete or corrupt clips" warning. After checking the original video folder on the internal hard drive and comparing it to the number of clips FCP imported, I learned that I had lost around 20 clips/video files at one point. Other shooting day transfers worked completely smoothly with all of the files imported (we split up the footage by shooting day, without touching or changing the CONTENTS folders). So, some transfers work and some don't. And 2) When I try to import the files from our 4th day of shooting, I get a "Selected path does not contain a P2 volume." Nothing is imported.
So, that's my situation, and I'm getting very desperate. I know that I'm not doing things in the Apple-supported way, but I'm really hoping there's still someway to successfully get the files from the external hard drive into FCP completely. It seems to work some of the time.
Final notes: When importing, I make sure to import the entire CONTENTS folder. There is never a LASTCLIP.TXT file listed under it in the window, but some of the days of footage have transferred perfectly, so I'm hoping that's not a dealbreaker. If it is, isn't there some way to rebuild a lastclip.txt file? I don't even know if that's the issue. And one last note: In most of my folders, the "CLIP" folder has a number of files in it. In the 4th day's footage that I can't import at all, I noticed that the CLIP folder is empty. And on the days where FCP isn't importing all the files (like I mentioned above), there isn't a CLIP file for every single VIDEO file. Could this be the main problem? Along this line, is there a way to somehow put the footage on the external hard drive back through a p2 card and then into the Mac?
Okay, I'll stop typing. Thank you so, so much for any help.
Tom
PowerMac G5 (Dual 2.3 GHz) Mac OS X (10.4.6) Quicktime 7.1.1 - Final Cut Pro 5.1 - Aforementioned External Hard Drive: LaCie Brick (FAT 32 based)
PowerMac G5 Mac OS X (10.4.6)

The problem didn't turn out to be as complicated as I had thought. The process I described above ended up working fine, and I'll explain how. And this is a cool workaround, because the AppleCare helpers told me that they didn't think it would work (FCP P2 import is only supported straight from the P2 card/viewer or the camera).
I hooked up my external hard drive to the Power Mac G5, and copied the files and folders onto my internal scratch disk. Then, I opened FCP and chose IMPORT -> Panasonic P2. I chose the "CONTENTS" folder for each day's filming, and imported them in, no problems. There was no visible "lastclip.txt" file shown (under the "CONTENTS" folder or anywhere else), but this didn't seem to cause any problems.
The reason that not all of the footage was bring imported (the aforementioned "one or more P2 clips failed..." warning) was because we were missing clip files (in the CLIP folder) corresponding to certain video files (in the VIDEO folder). Luckily, we had just forgotten to transfer all of them from the original external hard drive, and once we transfered them completely, FCP could read all the video files. FCP needs a clip file for every video file in order to make it work (that's why our aforementioned "Day 4" could not be read; we hadn't copied all of the clip files over with the video files).
Even after we did this, we STILL were getting the "one or more P2 clips..." warning for our Day 5. After taking a look at all the folders, we figured out that there were still more files in the VIDEO folder than in the CLIP folder, even after we transferred them all over. Finally, we figured out what had happened. For some reason, some of the audio files for some of the clips had been included in the VIDEO folder for our Day 5. There is no way we did this accidentally; somehow, the HVX200 placed some of the audio files into both the VIDEO and AUDIO folders. And FCP was trying to read those as video files, and therefore couldn't find the corresponding clips in the CLIP folder. After making sure that those audio files were also in the AUDIO folder, we simply deleted them from the VIDEO folder and stopped getting the "failed to import" warning.
Final thing to share: If we had actually been unable to find the corresponding clip files in our original external hard drive, we had also found a potential solution (that we didn't end up needing to try). You can record from FCP back onto the P2 card, in the hopes that the clip files would be regenerated when you re-import it into FCP. I received a PDF file about this process, and I'm not sure how to put it up on the page here. If interested in this described process (which, again, I can't fully vouch for), feel free to email me at [email protected] and I can forward it to you.
Hope this helps.
PowerMac G5 Mac OS X (10.4.6)
PowerMac G5 Mac OS X (10.4.6)

How do I import wav files from an external hard drive into itunes converting to aac?

I have 270 gig of wav files on an external hard drive. I am having trouble finding a way to import these into itunes while converting to aac

Note that .wav files do not carry a tag. If you import files of the form ..\<Artist>\<Album>\## <Name> into iTunes it will fill in the name property as the filename ## <Name> and all other fields will be blank. Assuming there is useful data in the path to capture, use Edit > Preferences > Avanced and disable the Keep... and Copy... options before adding the tracks to iTunes. You can then use the script TagFromFilename to fill in the blanks. Once this information is there you can convert the files to their new format and the converted files will inherit the track details.
You might want to consider initially converting to Apple Lossless which could halve the physical size of the collection with no loss of quality, and permanently embed the tag details. You can then choose to make a downsampled collection while retaining the full quality lossless copies and completely discarding the .wav originals.
tt2

How can I transfer files off an external hard drive formatted for windows?

I just bought my first mac (yay!) and am trying to transfer my files off of my old pc. The problem is that I stored all my personal files on an external hard drive, which is of course formatted for windows. My mac will open it, but it is "read only." I tried plugging it back into my pc and using the Migration Assistant to transfer my files over, but it was not detected (rest of the pc was).
However, the second time I tried plugging it in to my pc, it told me it would need to be formatted first. Obviously my mac has changed something on it, and now all my personal files are on a hard drive that is unusable by either my old pc or my new mac!
Any suggestions would be appreciated! Heads up though, I am not especially computer literate, and my pc needs to stay intact as the husband needs it and some of the programs on it for school. Also, I have a second external hard drive that is brand new with nothing on it, if that will come in handy.
Thanks!

Format the extra HDD to EXFAT as previously indicated. There are two ways that can use to transferr the data.
1. Connect both drives to the PC and the copy the files to the newly formatted (EXFAT) drive from the HDD with the data . Then connect the EXFAT drive to the MBP and transfer the data to same.
2. Connect both drives to the MBP and open DISK UTILITY>RESTORE. Drag the drive with the data on it to the 'Source' field. Drag the EXFAT drive to the 'Destination' field. Click on the 'Restore' butt is on. After the transfer has been completed, close DISK UTILITY and place the data on the MBP where you want it.
Ciao.

I am a long time iTunes user but a new MacBook owner! :) I keep the majority of my music files on an external hard drive. I'm trying to view all those files on my MacBook through iTunes. With windows you would go to : File/Add To Library, and iTunes w

I am a long time iTunes user but a new MacBook owner! I keep the majority of my music files on an external hard drive. I'm trying to view all those files on my MacBook through iTunes. With windows you would go to : File/Add To Library, and iTunes would add all your selected files to your music library BUT WOULD NOT COPY THEM TO YOUR HARD DRIVE. In other words, if the external hard drive was connected, you could listen, drag/drop, and edit the files. When I tried the same thing with my new MacBook... it actually started coping the files to my MacBook harddrive. I don't want that, it's millions and millions of mp3's that I don't want to keep on my computer, only my external hard drive. Can anyone help? I'm sure it's something easy, I'm just so new to the Mac world. Being an iPhone owner for many many years I'm picking up things fast, but this is getting the best of me! Help !

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

I am having problems adding files to my external hard drive. Can anyone help me?

Similar Messages

Maybe you are looking for