I am having problems reestablishing my Time Capsule. I had to get a new internet modem and that seemed to screw up my Time Capsule. The amber light keeps blinking and it's not being picked up when my Macbook scans or when my PC scans for the wireless ne

I can't find my Time Capsule on my networks anymore. It's like it doesn't exist. We got hit by a storm and that might have caused our internet modem from ATT to fry. I replaced the modem today but now my Time Capsule isnt working. It's blinking amber. The PC its connected to through the ATT modem isn't finding it as it scans and its not in utilities. My MacBook isn't finding the time capsule either when it scans. Whenever I hooked up all the wires to the time capsule and the modem, the internet stops working. I've tried resetting the time capsule but it's still blinking. I had all my computer equipment on a power surge protector. A pretty good one. All my other equipment is fine. The ATT modem was old, so I thought it might not have even been the lightening. Nothing else in home was injured by storm. I am freaking out and need help!!! I can't use my MACbook to do my internet work and all my files were backed up on the time capsule.
Another problem. My Time Machine isn't backing up now either. What is up with that?
I would be soooo grateful if someone can help me! Thanks a million!

A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482

Similar Messages

I had to get a new hard drive and some of my pictures show up but when I go to click on them to open them there is a triangle with an exclamation mark.

I had to get a new hard drive and some of my pictures show up but when I go to click on them to open them there is a triangle with an exclamation mark. Did I loose those pictures or is there a problem with iphoto

How about the most likely occurance - something incorrect about how the iPhoto library was transfered
What version of iPhoto '11 (9.4.3 is the latest)?
exactly how was your iPhoto library transfered to your new hard drive
This indicates that there is a problem in the iPhoto database - a possible solution to try is Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library
Why did you get a new hard drive? What kind of backup do you have?
LN

I had to get a new hard drive and now illustrator says i need to reactivate by license - when I go to do it over the phone i get a recording saying my reactivation number is invalid

I had to get a new hard drive, now illustrator says my license is expired and I have to get reactivated. When I used the phone support and entered in all the numbers, a recording comes up saying that my reactivation numbers are invalid. What can I do so I can start working again in illustrator

Where did you purchase illustrator. It sounds like it was from a shady dealer. I would contact Adobe and see what you can do.

Component and Object are not being filled automatically when filling IBase

Hello all,
When filling the Ibase number in a Service Order (Reference Objects), the component and the object ID are not deing filled automatically. But if I fill the component instead of the IBase ID, the Ibase and the object are being filled.
Can anyone help me with this issue, please? I would need the component and the object being filled automatically when entering the Ibase number.
Thank you and Regards.

Hi,
Do you have the component assign to a client?
Best regards,
Rui Mariano

I have a brand new iPad 2 and it is not being "seen" by iTunes for Windows (64 bit Win 7)

I originally had my iTunes library (music, apps, etc) on a MacBook. Used "home sharing" to drag over most of my collection to my new Windows 7 laptop. All apps, music, etc show up fine in iTunes on Windows but when I unpacked my new iPad 2 and plugged the apple cable into the USB port on my Windows laptop and the other end in my iPad 2, no synching occured nor did the iPad 2 show up on the left-hand list on iTunes.
Any idea what might be wrong? I did already try different USB ports. Each time I plug and unplug I get the audible notification from my laptop that the cable is disconnected and/or connected. so it's not a hardware issue.

A Couple of questions..
Is the location shown under preferences/Advanced/General still showing the correct location?
Is the check boxes under this checked or unchecked?

I recently had to get a new iphone 5 and my notes and contacts downloaded from icloud but my apps didn't so they told me to get them from itunes - except that itunes overroad my notes with older ones - how can I get just my notes from icloud?

- My computer does not communicate with icloud

You must have notes synch turned on your iPhone:
Settings>>iCloud>>NOTES on
http://support.apple.com/kb/PH2591
http://support.apple.com/kb/PH12081

I am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully,

i am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully, it just keeps my mac (old 1.6Ghz 2.5 GB sdram G5 still good for most stuff i need) spinning for ever but i can see compression type H.264 selected and the other setting but i can not select any other options as it still thinking but never opens! why is this happening how do i get round it?
my work flow is: 300 images shot on a 5d mark II medium jpegs opened in Light Room cropped to 16:9 then exported and opened in quick time i can save a .mov H264 giving me files sizes of 14 mb for a 16 second time lapse, mp4 9 mb. the only way i can get large files is saving as a self contained movie then i get 300mb files.
i need to save my files 1920 x 1080 photo jpeg codec as i want HD quality.
i am sure there is a simple way round this?
thanks guys!

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left?

What's the error? Longtime site not being picked up by Google

This site has been up for a year and is not being picked up by Google. What is the problem?
Any suggestions much appreciated.
www.elspethcameron.com

+(sorry for my english, it usually is better than that I think/hope)+
Ok... Let's see...
www.elspethcameron.ca is just a forwarding url with cloaking (masking, masking the real url) enabled so it's not dynamic it doesn't change when visiting different pages. It is listed in google
http://www.google.ch/search?hl=en&q=site%3Awww.elspethcameron.ca&btnG=Search&met a=
but there is no content under this url because it is just forwarding visitors to the real website, just like a link would do that.
The real website is, at least partially, on google with its content as you can see here
http://www.google.ch/search?hl=en&q=site%3Aweb.mac.com%2Felspethcameron%2F&btnG= Search&meta=
The other parts of the website are not indexed by google. I think that is because google is not able to crawl the nav bar because it is javascript rendering. You could make a second nav bar by your own and put it on the bottom of the page. Simply add a text field and put normal links in it to the other websites. Google will then follow them next time indexing your page.
In addition to that you should watch the thread I posted before. Note that by making your sitemap you don't use www.elspethcameron.ca but the real url.
Regards,
Cédric

Item in sales order not being picked into picking list

Hi Gurus,
Could you please tell me the possible reasons as why an item in the sales order which has enough stock not being picked into the picking list?
Many Thanks
Choudry

Hi
Delivery creation that is selection date is controlled by the schedule line of the line item in the sales order
Try by changing the schedule lines in sales order in VA02
there you try to change the delivery date to past
It might be possible if you had enough stocks at that time
Regards
Raja

IPhoto won't open due to the not being updated but when I check to upgrade to iPhoto 11 it tells me it is installed. The photos in the library were modified using 9.1.5 and the iPhoto is said to be 7.1.5 (iPhoto 8). Any ideas?

iPhoto won't open due to the not being updated but when I check to upgrade to iPhoto 11 it tells me it is installed. The photos in the library were modified using 9.1.5 and the iPhoto is said to be 7.1.5 (iPhoto 8). Any ideas?

How do you know the library was modified with iPhoto 9 (11)? If you've never had iPhoto 9 on your Mac it could'nt have. It sounds like a damaged library. Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Large files not being picked by FTP adapter

Hello,
In our integration scenario, files from the AS400 (legacy system) are placed at a FTP location from where the XI picks up the file for processing. We have FTP communication channel.
The file has about 8000 records is in binary format. When the file was placed it was not being picked up after the mentioned polling period of 60 secs. After manually inserting about 300 records which makes the file size smaller, the file is picked up bu XI and processed without error. With the 8000 records the file size was 2.5 MB.
Thank you

Please provide a J2EE trace at logging severity "Debug" for the location
"com.sap.aii.adapter.file". Please do the following:
- increase logging severity to "Debug"
- set log levels to ERROR for all components
- ONLY set log level to DEBUG for "com.sap.aii.adapter.file"
- reproduce the problem and gather the defaultTrace.trc immediately
after you reproduce
- remember to reset the logging severity after you have reproduced as
leaving it on "Debug" can cause performance problems in your system.
Also the ftp server logs will be needed in this case.

Agreements Not Being Picked For SFTP Protocol in Oracle 11G

Hi Anuj ,
PFB the Details of the Issue :
Agreements are not being picked for SFTP protocol even though From TP , To TP , Document Type and Revision are picked correctly .
We are running on MLR11 , Version : 11.1.1.4.0 . Also we have set b2b.useCPAid to false in EM Properties so that Agreement is picked based on DocType Name , Revision and Partner Id's .
Also when we used File Protocol its working Fine . The problem exists for SFTP Protocol .
Error Code : B2B-50547
Error Description Machine Info: (gwl09072appg084) Description: Agreement not found for trading partners: FromTP TestEbxml, ToTP BTGS with document type rqRequestServiceRequest-1.0-INBOUND.
Patch Level : 14114625
Regards,
Rohith

Hi Anuj ,
Thanks for the reply .
Yes we are setting the Filename Format explicitly in the LC . As far as we have understood , naming convention FromTP_MSGID.xml
is used to identify the TP and also MSGID is used to avoid duplicates and identification xpath is set to identify the Action .
When we are using %FROM_PARTY%_%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%_%TIMESTAMP%.xml , All parameters are identified as expected and Agreements are also being picked when we are using File Protocol . Only when we are trying with SFTP Prtocol , even though all values are being picked correctly , only agreement is not being picked . Could you please help ?
Regards,
Rohith

In Production Order Old Raw Material Batch No. not being picked (FIFO)

Hi,
We have activated Batch Management for ROH type of Materials with Split Valuation and the Strategy applied is FIFO.
We have generated many such batches and consumed too, but lately out of many ROH mateials, 2 ROH who have Old Batches are not being picked and the Batch which is recently created is being picked at the time of Production Order Release.
We have not done any changes into the Master Data nor the config during this period.
Can anyone help what can be the issue ?
Thanks in advance,
Harris Panchal

Hi,
Actually our requirement is that we want to sort out the Batch as per the Earliest one and consume the earliest first, i.e. FIFO strategy.
For that the MM Consultant has configured the following Charac:
1. Stock Determination: Priority
2. Value Assignment Type
3. Batch Number
Which I am feeling should be changed and to be as per the following:
1. Created On
2. Batch Number
In OMCV, Classification is active with following option:
4 Classification in foreground for new batches only for the following movements: 101, 309, 310, 561
3 Classification always in foreground (all batches) for the following movements: 321, 501
Requesting your valuable inputs,
Thanks and regards,
Harris

TS1363 My new IPod is not being picked up by my computer. What should I do?

My new IPOD is not being picked up by my computer. What should I do?

@vic_suav, thanks for the additional information. Could you please try to see if this does the trick?
Quit iTunes on your PC, switch your iPhone on and make sure it's not locked, before connecting it to your computer. Then wait a minute or two until the "Download Photos" dialogue box pops up. When that happens, launch iTunes and wait a minute or two until iPhone shows up as a connected device.
If the above doesn't work, follow the steps in 'How to restart the Apple Mobile Device Service (AMDS) on Windows' to restart the Apple Mobile Device Service, here: http://support.apple.com/kb/TS1567
Otherwise, please try a different USB port on your PC. Then in your Windows 7, click Start and choose Control Panel. Click "Uninstall a program". Then verify that Apple Mobile Device Support is visible in the list of currently installed programs. If Apple Mobile Device Support is not listed, remove iTunes, QuickTime, Apple Software Update, Apple Application Support, and then reinstall iTunes. For removing and reinstalling iTunes, QuickTime, and other software components for Windows Windows 7, follow these steps: http://support.apple.com/kb/HT1923
if all of the above fail, you can try some of the troubleshooting steps outlined in 'iOS Device not recognized in iTunes for Windows' article: http://support.apple.com/kb/TS1538
Let me know how it goes. Good luck!

Delivery document not being picked while creating shipment document

Dear All,
Issue is regarding creation of shipment document.
As i am creating shipment document in VT01N, am unable to get the delivery doc . ie., delivery document is not picked in shipment creation.
I have created a sales order, picking is completed n saved, PGI not yet been done.
Am unable to create a shipment document due to delivery document not being picked.
i/p's will be of great help.
with regards,
Vijayashree

Dear all,
The issue is solved.
As the Route was not picking in Sales Order so the delivery was not picked in shipment creation.
Route determination setting was not correct.
Regards,
Vijayashree

I am having problems reestablishing my Time Capsule. I had to get a new internet modem and that seemed to screw up my Time Capsule. The amber light keeps blinking and it's not being picked up when my Macbook scans or when my PC scans for the wireless ne

Similar Messages

Maybe you are looking for