I am having problems with an older ipod running 1.1.2 firmware trying to use earbuds with volume controls made for ipod. any suggestions?

I am problems with an older Ipod classic running 1.1.2pc using earbuds with Ipod inline remote. The earbuds work fine with my new Ipod but not the older one. Any suggestions?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Similar Messages

I am trying to open iBook on my iPhone 5s with iOS 8.2, iBook closes. I have tried restarting iBook, and the phone, but it still happens, any suggestions?

I am trying to open iBook on my iPhone 5s with iOS 8.2, when it opens I have a white screen for a few minutes, then iBook closes. I have tried restarting iBook, and the phone, but it still happens, any suggestions?

do a reset: hold the power and home buttons simultaneously until the Apple logo appears.

HT1351 Having problems downloading Podcasts to Nano. I had the Nano checked at the Genius Bar- OK. Reinstalled iTunes. Any suggestions?

Having problems downloading Podcasts to my Nano. I re-installed iTunes but that didn't help. I am not very computer literate. Can anyone help?

Nevermind, I finally figured it out. There was a different screen on iTunes.

Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. scree

Not sure that I have selected the correct forum. Hope my questions are clearly stated.
Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices). It does not show Mail or Safari menus. System preferences' display "gathered" the Samsung and chose its resolution. I did not find a way to select the Samsung as my display.
In addition to having old hardware, we have Verizon FIOS providing internet and TV access. Is there any way to make this work for us? We would like to stream video (Netflix) and view shows from the Web. Do we need Apple TV to do this? Or is it not possible with our old iMac? My husband thinks that our Airport could be a factor.
Thank you

Lately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
There are, actually, many alternatives to choose from than just from a Mac.
You need to have or invest in a WiFi capable router for all of these examples.
Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
If you have a older Mac, like I have noticed many users do, then you have other options.
If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time, you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV.

I have had to put my ipod touch in Recovery Mode and tried to sync it with itunes but it wont restore itself. What can I do?

I have had to put my ipod touch in Recovery Mode and tried to sync it with itunes but it wont restore itself. What can I do?

http://support.apple.com/kb/TS3694#error3194
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

I'm having problems loading web pages on a vmware workstation 6.05 guest OS using Firefox 3.5.9. I can ping external websites fine from the guest. No proxy. Any ideas?

I'm having problems loading web pages on a vmware workstation 6.05 guest OS using Firefox 3.5.9. Also tried the latest 3.6 version. I can ping external websites fine from the guest. No proxy. Any ideas?
== This happened ==
Every time Firefox opened
== I installed a guest OS

I'm using the same swear words as you. There are several threads about this problem - no answers.
I have a LaserJet 8100N and 8150DN, get the 79.01FE error on the 8150 from print outs from Safari, Firefox, and Preview, for only some sites/documents. CNN.com has become my test site, seems I can crash the printer 90% of the time with their home page at any given time in the day.
A summary of what I have tried:
- Upgraded the firmware to the latest for both the JetDirect card and the printer.
- Swapped the JetDirect cards between the 8100 and 8150.
- Swapped ram on the 8150 board.
- Disconnected external trays, bins, and removed extra RAM and hard drives from the 8150.
- Tried setting the JetDirect link and matching switch port link to 100FD, 10HD, 10FD, 100HD, as suggested by a poster.
- Tried having client's print to the printer through a XServer Print Server.
- Can consistently create the error from multiple systems running 10.3.9, 10.4.5, and 10.4.6 (didn't have an install base of 10.4 before 10.4.5).
Someone in the 'know' (which means they're likely not), said 10.4.7 will likely fix this. Being Apple has not even addressed that the problem exists (that I could find), I doubt the magic fix is a release away.
Apple's software is triggering something that Windows systems appears not to be, so one could say it's an Apple problem; but ulimately it's HP's software/hardware that is at fault in that it is allowing their system to crash from input alone.
G4/G5 XServes

Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????

Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????

Requirements for iPhone 5:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later
The highest version of iTunes you can install is 10.6.3 which will not sync with the iPhone 5.
Roger Wilmut1 wrote:
It's always a good idea to check the requirements before purchasing.
The person I spoke with at 1-800-MY-APPLE gave me totally different info...she said the iPhone 5 would in fact sync with the older version of iTunes and that I could restore from my previous iPhone 4 backup and also bring in my music that way. Hmmm....
I'm inclined to go by the published specs, but now I have to jump thru a bunch of hoops I wasn't expecting to.

I have a 4 GB Ipod Nano from 2006 I am trying to use again. I leet the anti-virus on my old PC with the iTunes lapse and I think I managed to attract a virus. If I plug my iPod Nano into this old PC, can it also become infested with a virus?

I have a 4GB iPod Nano from 2006 I am trying to use again. I let the anti-virus softwarer lapse on my old PC, the one with my iTunes library on it. Can my iTunes library become affected with this virus?
I have tried to fully charge the iPod but the message screen only displays ""Use iTunes to restore"
Do I need to re-download iTunes and start over?

Hello Mike,
No, you shouldn't need to worry about your iTunes library being infected with a virus. As to the restore message on your Nano, have you tried restoring it via iTunes yet?
B-rock

I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions

I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions?

Oh no! Lets ensure that you are connected. Have you tried to reset the Network Extender? Are other devices able to connect to the Extender? Is your Internet service up and running?
Share details so that we can help!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport

I was having problems downloading the trial version of photoshop... pe advice I used the adobe cc cl

i was having problems downloading the trial version of photo shop.. per advice I used the adobe cc tool... if finally downloaded and installed but now says there was a patch error... HHHHHEEEELLLPPPP!

Virtual One what error exactly are you receiving?

My July 2009 iMac with OSX Mavericks "iMac is not supported" when I tried to perform bluetooth with my iPhone 5. What is the problem. thanks

My July 2009 iMac with OSX Mavericks "iMac is not supported" when I tried to perform bluetooth with my iPhone 5. What is the problem. thanks

Bluetooth is only supported for tethering.
Barry

I'm having trouble communicating with a transducer (Keyence LS-3100 laser scan micrometer) via the serial port. It works in Hyperterminal. Any suggestions?

Its not a simple baud-rate or parity error. If I issue the command to send data (X1) in hyperterminal I start to get data. If I then switch to Labview I still get data. However if I try to issue the send-data command via Labview I get nothing (i.e. I can read from the device, but not write to it).
I am on a Windows 98 (version 2) PC, running Labview 5.1.1

Try adding a carraige return to the end of your command.
"djb" wrote in message news:[email protected]..
> I'm having trouble communicating with a transducer (Keyence LS-3100
> laser scan micrometer) via the serial port. It works in
> Hyperterminal. Any suggestions?
>
> Its not a simple baud-rate or parity error. If I issue the command to
> send data (X1) in hyperterminal I start to get data. If I then switch
> to Labview I still get data. However if I try to issue the send-data
> command via Labview I get nothing (i.e. I can read from the device,
> but not write to it).
> I am on a Windows 98 (version 2) PC, running Labview 5.1.1

Low resolution albumart when connected to 'made for Ipod' ICE-systems.

I've recently installed a new stereo in my car. It is 'made for Ipod', and should therefore work great with my new Ipod Touch (3G) 32GB. And it does, in all ways but one. The albumart, shown on the stereo, looks really poor (with low resolution).
I've spent some time looking for info in this matter on the net. Apparently the same problem occurs with many different brands of ICE-systems (In Car Entertainment). According to posts on other forums this problem came with a recent firmware upgrade (v3.0?), and possibly has something to do with coverflow. Older versions of Ipods apparently shows crisp albumarts on these stereos (can't confirm this, my Ipod is too new).
Since it seems it could be a software related problem, can one expect a fix in future firmware upgrades? Or is this something I/we have to live with (due to limitaitons in the hardware)?

I'm having a similar problem. I can pair my ipod nano with my BT speakers first time and work perfect, but the next time I try to play music through the speakers I MUST do a manual connection beacuse the nano not auto connects with ANY paried devices. I mean, the BT speakers appears as paried, but not connected
I am extremely frustrated too.
Any idea?
Tested with diferent devices with same behaviur.

I am trying to use Words with friends on my iphone 5. How do I get rid of "Connect to itunes to Use Push Notifications

I am trying to use Words with friends on my iphone 5. How do I get rid of "Connect to itunes to Use Push Notifications

Reading some older threads from 2012 and 2011 it appears the problem was present even then. Part of the problem was due to people using multiple or different account id's on the various devices. In my case, I only have one ID and it is the same on all devices yet the iPhone and iPad are still throwing the same error when I try turning on iTunes Match. This is very frustrating . . . any help out there? Thanks.

Error when trying to use LogMiner with Oracle 8.1.6.0.0

Hi everybody,
I'm trying to use LogMiner with Oracle 8.1.6.0.0. When I execute the following code with SQL*Plus, I have an error.
BEGIN
DBMS_LOGMNR.START_LOGMNR
(options =>
dbms_logmnr.dict_from_online_catalog);
END;
The error displayed by SQL*Plus is:
PLS-00302: 'DICT_FROM_ONLINE_CATALOG' must be declared.
Please, how to solve this problem?
Thanks you in advance for your answers.

user639304 wrote:
Hi everybody,
I'm trying to use LogMiner with Oracle 8.1.6.0.0. When I execute the following code with SQL*Plus, I have an error.
BEGIN
DBMS_LOGMNR.START_LOGMNR
(options =>
dbms_logmnr.dict_from_online_catalog);
END;
The error displayed by SQL*Plus is:
PLS-00302: 'DICT_FROM_ONLINE_CATALOG' must be declared.
Please, how to solve this problem?
Thanks you in advance for your answers.Looking at the 8.1.7 doc set (the oldest available on tahiti) I get no hits when searching for 'dict_from_online_catalog'. Searching the 9.2 doc set turns up a reference. Looks like you are trying to use an option that isn't available in your version of Oracle.

I am having problems with an older ipod running 1.1.2 firmware trying to use earbuds with volume controls made for ipod. any suggestions?

Similar Messages

Maybe you are looking for