I am having problems with cover flow on my i phone when i change to landscape and flick through covers it is very unstabale and jerky and eventually crashes out.

i am having problems with cover flow on my i phone 4s 32gb when i change to landscape and flick through the album covers it becomes very jerky and unstable and eventually crashes out.

A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482

Similar Messages

  • Recently having problem with flickering on monitor (viewsonic vg2436wm).  When coming out of sleep mode.  The screen goes gray, sometime out.  Have to press power button to get screen on.  Problem stops.

    Recently having problem with flickering on monitor (viewsonic vg2436wm).  When coming out of sleep mode.  It will flicker, the screen goes gray, sometime out.  Have to press power button to get screen on.  Problem stops.  Getting more frequent.  After sometime problem stops. My system is a Mac Mini 2010, 2.4 intel core 2 duo, 2 GB, running OSX10.8.5

    See if it's related to this...
    The 2012 macs (and later apparently) not waking normally from sleep after hours being in sleep. (noted here ...
    http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
    "Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
    The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
    A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
    About iMac sleep...
    http://forums.macrumors.com/showthread.php?t=1529750
    Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
    http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

  • I am having trouble with an excel file wanting to save when no changes were made & opening as read only for the 2nd person - but allowing them to save the file.

    1) I am having trouble with an excel file wanting to save when no changes were made.  As soon as you open the file and exit.  It prompts for a save.
    All excel versions are 15.0.4701.1002.
    Using a table.
    the functions CELL, OFFSET, TODAY, INDIRECT, NOW, INFO and RAND are not being used.
    2) Same file.   2nd person is being told they are opening the file as read only - but when they are quitting excel prompts them to save the file. 
    Everything was working fine.  I started having problems with Excel, IT wiped my version out and re-installed office. 
    File is on networked server HP - Windows Server 2012 Essentials.  
    We are all on Windows 8.1 Pro.
    I really hope someone can help - the excel expert had no answer - and passed me along to here.

    I copied the whole file and started deleting worksheets one at a time and testing it by closing it and re-opening it then closing it again – to see if it wanted to save. 
    Once all the pivot tables were deleted – the problem went away. 
    I found that some of the pivot tables had automatic refresh upon open, so this caused the excel to think data had changed. 
    It is fixed now.  By clicking on one cell of the pivot table, analyze, options, data and uncheck the 3<sup>rd</sup> square down to not automatically refresh.  NOT A NETWORK ISSUE.

  • Problem with Cover Flow View

    Not sure if anyone else is having this problem and I think it was from when there were some Vista updates this morning. Firstly my Podcasts wouldn't play but thats now been sorted by a FAQ but the cover flow view is all messed up and I can't seem to sort it. The covers are there and appear for a couple of seconds and then go green/black and white with lines through them. In Album view, the covers are fine but just the cover flow (which is the one I love to use! Anyone got any suggestions or having the same problem?

    Okay. I'm still inclined to check on drivers, because your QuickTime version may have gone up a version with the recent iTunes install. (QuickTime can be sensitive to drivers ... and even though the video drivers are up to date, other driver/whatnot updates on a Dell may also help with video performance.)
    The Inspiron 6400/E1505 32-bit vista page is one that i can't get a link for (i can navigate to the page, but the URL that shows up in my web browser once i've gotten there doesn't work for linking purposes).
    So try heading to the XP page for that model, going up to the top of the page where it says Operating System: Windows XP Change OS, clicking Change OS, and selecting "Windows Vista 32-bit":
    Inspiron 6400/E1505 (XP)
    Once you're at the Windows 32-bit Vista page for that model, check in particular on the following things:
    Check to see if the Chipset - Driver for your Intel Mobile Chipset is up to date.
    Check to see if your Dell Inspiron 6400/E1505 System BIOS is up to date.
    After you've applied any updates (if any are applicable), do you have any better luck with the Cover Flow view?

  • Problem with Cover flow

    often times when I have iTunes open in cover flow view and switch to another window using Exposé cover flow goes all whack (see photo). Has anybody else had this problem? What can I do about it?
    http://img221.imageshack.us/img221/8260/picture1lk8.png

    Hi,
    Your picture appears to be of a Mac desktop. You might want to post your problem on the forum that is meant for mac users. This one is for windows users. I'm surprised by your problem. I have noticed a lot of problems with the way itunes uses video refreshing, but I assumed the problems were because apple didn't want its windows version to work too well. It is the slowest and most frustrating application on my machine, but I assumed it would work pretty well on a mac. Anyways, good luck.

  • Problems with Cover Flow and Artwork.

    Hey,
    this is my first time having iTunes or iPhone/iPod, so I have tons of albums at home. It's no problem to get the music on the phone, but
    1. There is no artwork although all albums are original.
    2. All the songs show up single in CoverFlow. Instead of tapping one album and having the songs appear, they all appear in CoverFlow.
    Any ideas?
    Thanks.

    Righty, I'll start with the weird coverflow. Go into itunes and have a look at the song and album titles for your songs. For each album, is each song's album title and artist title the same? If not, select all of the offending songs, right / shift click, select 'get info' and change the album / artist title. This should work
    Now, whilst you have the 'get info' window open, select 'Artwork', go to amazon and find the album you are looking at. Grab the album cover and drag to your desktop. Now, drag to the image to the artwork window and you should be all set!

  • Problem with Cover-Flow display

    Hello!
    Whenever I play compilations Cover-Flow doesn´t display "Interpret" in the third column but "Album-Interpret" (screenshot 1). However, I set the "Album-Interpret" Tag to the whole compilation´s tite so that Itunes displays all tracks in one Block (screenshot 2).
    The Problem is that now the artist´s name is not displayed i this view.
    Does anybody have an idea how to solve this?
    Screenshot 1
    Screenshot 2

    hey i had this problem too its because sum times the artist have Feat. artist
    For Example:: kanye west Feat. common
    jus move the common to the song name it shud work jus fine

  • Problem with Cover Flow full screen view in 10.6

    I like to use the Cover Flow full screen view in iTunes on my monitor.  Since upgrading to iTunes 10.6 Cover Flow full screen view will revert to Cover Flow standard view between each song. This did not occur with any previous version of iTunes. Is there a setting that will prevent Cover Flow automatically switching back to standard view from full screen view?

    I guess I am the only one experiencing this issue of Cover Flow full screen view collapsing to standard view when a song within an album or playlist changes. This began in 10.6 and has continued in 10.6.1. At least I have not experienced the more serious issues others have with 10.6.

  • Problems with "Cover flow" mode

    I read some posts about wrong order of songs or pictures in cover flow mode, but I think the problem is much more serious:
    I wanted to delete the junk pictures that I downloaded from my iPhone and I decided to do that in the cover flow mode because I thought it was the most convenient view mode.
    I browsed the pictures and when I decided I wanted to delete one I would push Command+Delete. I noticed that the picture I was trying to delete would stay there. I tried again and again and it wouldn't go away. I tried that multiple times on multiple files and eventually I noticed that the finder was actually deleting files, but unfortunately not the highlighted ones. I found multiple pictures in the trash that I didn't want to delete.
    Anybody has the same experience? Any comment? Haven't Apple geniuses noticed that yet?

    Hi, Hack2er.
    Let us know if this article in the Apple Knowledge Base relates to your problem.

  • I downloaded Mozilla 4 and tried to use it then, I had to delete it and go back to 3.6 vs now I am having problems with my MS SQL 2005 why? What was changed to enable Mozilla 4 to sync with MS SQL and how do I get it corrected?

    After, trying Mozilla 4 beta and then having to go back to a previous vs of Mozilla 3.6.11 my MS OLE DB Provider for SQL 2005 Server has this error message '80040E57' I am using Windows 7 which was pre-installed on my new computer. I do not know how to fix it?

    The latest flash player release is 11,0,1,152.
    Can you upgrade to this version and see whether the crash stil exists?
    Go to get.adobe.com/flashplayer to download and install flash player.
    In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
    saranlee wrote:
    My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows  which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

  • Im having problems with Photobucket..sending my customized photos to friends on myspace. They claim it works for them But the albums freeze and i cannot send HELP...

    problem with photobucket..When i get ready to send out comments to myspace from my customized albums..it freezes and im not able to send. They say it works for them and gave me a long line of things to do..I have attempted that..it still doesnt work..Im aggravaded beyond belief..

    THANK YOU SO MUCH stussaar!
    My Mother did what you said for the Spam and my number was in there about 100 times. She deleted all them. Deleted me as a contact and then rebooted, then she text me and I text her back and I went right into the Spam again. I told her to tell TMobile this so then can maybe help and remove my number from Spam on their end.\
    Thanks you so much! you got us 99.999 % the way there!!
    I appreciate your help!!!!  I hope this worked also for your problem!!
    Thanks again!!!
    Mike

  • Problems with Cover Flow

    So I've just got my new iPod Classic and put on all my music, whilst scrolling through the artwork and selecting an artists 'Greatest Hits' album like usual it brings up all the tracks in a list but I noticed it brings up all other songs from other artists with albums titled 'Greatest Hits'.
    I went through and checked on other artists where album titles match and it does the same thing. Does anyone know how to resolve this?
    Any help would be greatly appreciated!

    Until Apple fixes this, the only way I can think of is to rename the albums from "Greatest Hits" to "<Artist's name> Greatest Hits". Wish I had a better solution. You should report this by completing Apple's Feedback Form HERE.

  • Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use  cmd+ r  when restarting. Is this the right way?

    Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r  when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

    Your Mac runs maintenance in the background for you.
    Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
    No idea why that was suggested.
    You may have a third party video player installed that's causing an incompatibility issue.
    Check these folders:
    /Library/Internet Plug-Ins/
    /Library/Input Methods/
    /Library/InputManagers/
    /Library/ScriptingAdditions
    ~/Library/Internet Plug-Ins/
    ~/Library/Input Methods/
    ~/Library/InputManagers/
    ~/Library/ScriptingAdditions
    The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
    To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

  • HT1222 Having problem with  Notes at time will not record dictation on iPhone?

    Having problem with  Notes at time will not record dictation on iPhone?

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    If that doesn't help have your phone examined by an apple technician. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • I am having problem with using the Basic brush definition

    I am having problem with using the Basic brush definition. When I try to click on it will not allow me to use it and will automatically use the 5 pt. oval brush definition. The only way I can use the basic brush is after I have already drawn something and then I have to click on the stroke and then press basic. This is incredibly annoying and if anyone could help I would greatly appreciate it. (I have Adobe CS6)

    for whatever reason, the basic 'brush' you see in the brushes palette effectively means removing any brush from a path. to draw with the brush tool you need a brush defined. in your case the last one selected being the 5 pt oval one.

Maybe you are looking for