I am having problems with installing Itunes 10.5 .With the windows installer

I am having problems with installing Itunes 10.5.It's the first time i dowload it,but every time het gives me an error message that a programm that was needed for installing didn't run.
What can i do???

When I attempt the download for Itunes 10.6, I get an immediate response of ""Files shared by these updates" has an invalid signature. The download has been removed."
That's suggesting that the AppleApplicationSupport.msi is getting damaged during the download via Apple Software Update for Windows.
Are you able to get the 10.6  update to go through if you use an iTunesSetup.exe (or iTunes64Setup.exe) installer file from the Apple Website?
http://www.apple.com/itunes/download/

Similar Messages

  • Help with installing itunes 7.1.1 on windows vista please!

    I am trying to install itunes 7.1.1 on my parents new computer. It has windows vista factory installed. I downloaded the installer, clicked on it to install and it stuck to the "preparing installation" message. No errors, no computer freezing. I tought it my be my installer that has a problem so I downloaded it again. Same thing happens? Anyone has a solution to that issue?

    when i open the itunesetup.exe file, nothing happens, not even an error message..... i deleted the file and tried to re download it, but i just got the same download super fast and the same problem... the new file doesn't open at all.... it shows up on the processes segement of the task manager for a second, disappers, and it still won't even get to the first screen of the instalation process.... **** updates.....

  • I cant Update my Ipod classic with Itunes a message says the windows installer service could not be accessed this can occur when running windows in safe mode or the windows installer is not correctly installed.

    I cant update my Ipod classic with Itunes it is related to Windows installer is not done correctly.

    Sounds like you need to repair the Windows Installer Service.
    See http://blogs.msdn.com/b/astebner/archive/2006/07/20/673408.aspx
    tt2

  • HT1926 since update cant install itunes error message: cant connect  windows installer

    received automatic update today and it would not install, advised to delete everything Apple basically and now i cant get itunes to load just get:" windows installer cant connect". tried all the checks with windows sfc/scannow and no faults.so i have lost itunes completely now! Any ideas pls?

    Try:
    http://support.apple.com/kb/TS3074
    If that doesn't work, try:
    Windows XP:
    http://support.apple.com/kb/HT1925
    Windows Vista, 7, & 8:
    http://support.apple.com/kb/HT1923
    Note: In addition to reinstalling the software listed, unistall other programs from Apple after everything listed, including iCloud.

  • Anyone having problems re-installing itunes 9.3 after uninstalling 10.1 version

    I have Windows XP Vista 32, and had problem with Applesyncnotifier not found error msg. The message suggested I uninstall the itunes version I had (10.1) and re-install, which I attempted to do. However, since I have Windows Vista Win32 bit, the 10.1 is not compatible and causes another error msg to pop up. So, I uninstalled 10 and re-installed itunes 9 on my PC. Now, I cannot open my itunes library and get the following error message. HELP!!
    "The file itunes Library.itl" cannot be read because it was created in a newer version of itunes"
    Please if anyone know how to get my Library to open, let me know.
    Thank you.

    DSK2691 wrote:
    I have Windows Vista Win32 bit, the 10.1 is not compatible
    That's a load of bull excrement.
    Instead of trying to use an old version of iTunes, install the current version from http://apple.com/itunes/download.

  • Help with installing Itunes on laptop with Windows Vista

    I have been trying for the last hour to install Itunes on my laptop. Everytime I click on the download button a pop up come up on my conputer saying Internet Explorer has closed and says something about changeing setting in the data execution prevention in the advanced settings of the sytem properties. Can anyone help me. It runs a 32 bit operating system.

    Hi...
    Um, I wouldn't have a clue if it's a USB1 or 2. I may be computer literate... but the technicalities go whoosing over my head. How can I tell?
    Yes, I do think I have probs with my iPod (sure didn't take 3 hours to charge before the folder with the ! with the support link comes up on the screen. But there is the problem that I can't download iTunes from the site without getting a *corrupt installation files. Find a fresh copy and download again.* Lost count of how many times I've done that. I even downloaded the standalone quicktime first.
    Gah! I'm soooo frustrated.
    Will try the iPod updater this morning and hope I successfully choose the 5th Gen iPod.
    thanks heaps
    Jaxster

  • Problem to install itunes and quicktime on the computer

    Hi.
    I had a problem to update itunes, so i did uninstall it.
    But when i shall install it again, quick time started to make problems.
    So i did remove that one too, now i can't install anything of it.
    I was told to delet everything in my temp file, i did, but it didn't help.
    Then i got problems with other things too.
    Does any one have a solution for me, i would be very happy.
    Can this problem also make problems for my cd-writer?
    Because after this, nothing works at it should do anymore.

    You are allowed to have two activated installations, so if you prefer you can keep the original installation intact.  If you prefer not to then the minimum you need to do is deactivate it.
    Downloads:
    CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html
    CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
    CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
    CS5.5 - http://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html
    CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
    Lightroom - all versions
    Windows
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  • Help I am having problems with installing itunes on windows 7 64bit

    I keep installing Itues but for some reason it will not sinc with my Ipad or iphone.  Each time i do get it installed it tells me to delete and start over.
    Help? with installing itunes on to windows 7 64 bit computer that will work with iphone and ipad...
    thanks kevin

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
    tt2

  • Windows 64Bit Itunes Error : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR."

    I have a brand new HP laptop windows 64bit that is having issues installing Itunes 10.6.3. Whenever attempting to install, I get the error message : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR." I thought this was an issue with the new version, and attempted to retrieve/install older versions of Itunes and same issue occurs. I have tried other forums and resolution tips from : https://discussions.apple.com/docs/DOC-3551 and nothing still. It appears that apple installs bonjour and nothing else. I have tried extracting the itunes package and installing the executables seperately, but everytime the error stil arises. I cannot repair the apple software update as it cannot install from the error mentioned above. Looking through the logs, it shows error : 1721, problem with windows installer package.Does anyone have any suggestions on what to try?

    There are so many different error and problems peopl are having.
    This is a link to mine
    https://discussions.apple.com/thread/3467825
    I think it has to be something on Apples end.
    Hopefully they fix it soon. Ive used a few GB redownloading and Im going crazy
    hope this settles you a bit

  • I'm unable to install the newest version of itunes on my pc, the promt says that there is a problem with the windows installer package, but I have downloaded the exe more than once. Is anyone able to help?

    I'm unable to install the newest version of itunes on my pc, the promt says that there is a problem with the windows installer package, but I have downloaded the exe more than once. Is anyone able to help?

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • On every attempt to install Itunes I've recieved the error message, "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package Vendor." What do?

    On every attempt to install Itunes I've recieved the error message, "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package Vendor." What do?

    I know there's a million threads like this, but I thought I'd record my experience.  I, too, was having the original poster's error when I tried to update iTunes on Windows XP.  I think I was stuck on 10. 
    I solved it by un-installing iTunes and every other Apple app.  I discovered that Apple Software Update would not un-install as its MSI file could not be found.  I used the "Windows Install Cleanup" tool from Microsoft to remove Apple Software Update from the list of installed programs.  Google "kb290301" for a Microsoft page that includes a download link for it.  After that, I was able to install a fresh copy of iTunes 10.5.2.
    I'm not sure why this app's folder and MSI were missing from my computer.  I had once used Laplink PC Mover to move everything from my old computer to this one, and perhaps it missed a bit.

  • Problems with Installing iTunes and wireless network connection

    Every time I attempt to install iTunes it completely kicks the internet off and an error comes up that the wireless network adapter to not connect or is not detected. My internet service is connected to a router which I receive wirelessly to my laptop. I do not understand why it is happening and to get the internet to work again I needed to do a system restore. Any ideas why this is happening. Also when iTunes was installed it came up correctly, it would just not connect to the net. I have had a previous version on my old laptop but since purchasing this new laptop I am having such difficulty. On another note, if this problem can be resolved, once iTunes is working is there a way to get the songs from my old computer onto the new? Thanks for the help in advance!

    I just saw your post and I resolved this on mine for my wired connection. I'm willing to bet that the issue is the same for wireless. Here's what I found.
    Issue:
    During the installation, iTunes installs some network components related to mobile device support over ethernet(Apple Mobile Device Ethernet Service - netaapl.inf). At the same time, according the logs, the install process removed OEM18.inf. This almost exactly coincided with the time that I saw the network connection die (preceded it by a few seconds).
    Basically, iTunes appears to be removing a required network component.
    Resolution:
    After installing iTunes and the network connection breaking, remove the network device from Device Manager and allow Windows to reinstall it automatically.
    The following instructions are for Windows 7, but they are close enough to follow for other versions of Windows.
    1. Click the Start button (Jewel in Vista and Win7).
    2. Right-click Computer and click Manage in the menu that appears (type your password or click Yes if prompted).
    3. On the left side of hte Computer Management window, click Device Manager.
    4. Click the arrow (or plus sign) next to Network Adapters to expand that section.
    5. Right-click your network adapter and click Uninstall in the menu that appears.
    6. Click OK.
    7. Reboot.
    Windows should automatically detect and reinstall your network device on boot.

  • Problem with installing iTunes

    So these are my problems with installing iTunes.
    At first it was :
    A required iTunes component is not installed.Please repair or reinstall iTunes (-45019)
    Then it got worse as it would not even open and these would appear:
    The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem.
    and this would appear:
    iTunes was not installed correctly. Please reinstall iTunes.
    Error 7 (Windows error 126)
    I reinstalled maybe about 5 times or more...
    If I thought I solved the above problem, this would appear:
    iTunesHelper.exe is not installed on my computer.
    I seen other people comment that you should unistall and restart the computer and install the setup again, but it does not work..
    And others would say to repair the AAS or iTunes etc..
    And after trying all these it does not work???
    What else works?

    I also tried repairing the Microsoft NET.

  • HT1926 can't install quicktime or itunes on windows 7 get the error message There is a problem with the windows installer package. A program required for this install to complete could not be run

    please help. Can't install quictime player or itunes on windows 7. Get the error message There is a problem with the windows installer package. A program required for this install to complete could not be run. Have followed all the steps suggested and still no luck.

    thank you for trying to help. I do not have apple software update on my computer. I have tried to install several programs so i could install it but every installation will not finish and rolls back and says no changes were made to my computer so i can't install the update. I even tried to force install as administrator but nothing works. Any help would be greatly appreciated. I have windows 7 64 bit.

  • Getting error and cannot download itunes.  says there is a problem with the windows installer package. a program required for the install to be complete could not be run.  any ideas?

    getting an error downloading itunes 64bit for windows 7.  says there is a problem with the windows installer package.  a program required for the install to be complete could not be run.  any ideas?  i uninstalled it last night when it would not open.

    Just in case, let's try a standalone AppleSoftwareUpdate.msi install.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
    Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.)

Maybe you are looking for