I am having problems with my ear pieces being pick up by bluetooth.  Do you have to BUY a special earpiece for the iphone 5?

I have two ear pieces, one practically new, I used with the iphone 4 I had.  The iphone 5 is not discovering the earpieces, and I have no hands free capability.  Do I have to buy a special earpiece for the 5 or is there a patch or something coming out?
SGBH

You do not need a special headset for your iPhone. Did you pair the headset with the new iPhone? You may have to read the instructions for the headset to see if you have to put it in "discovery" mode before it will show up on the iPhone's Bluetooth settings page.

Similar Messages

  • I'm having problems with my email account. I receive emails when I'm in a wifi zone.  But if the wifi is turned off and i'm not in a zone I don't receive my emails through the cellular network.  Only when I power off the phone and turn it back on, do I re

    I'm having problems with my email account. I receive emails when I'm in a wifi zone.  But if the wifi is turned off and i'm not in a zone I don't receive my emails through the cellular network.  Only when I power off the phone and turn it back on, do I receive the emails through the cellualr network (again with the wifi off)

    In your email settings on the phone check to make sure it is set to receive emails on cellular network.  It's a feature you can turn off so your phone isn't constantly updating emails on the cell network, but if you are usually in a place with wifi and aren't concerned about going over your data allowance, you can turn it back on. 

  • TS3899 I HAVE IPAD AIR HAVING PROBLEMS WITH EMAIL DELETING AFTER A SHORT TIME WITHOUT COMMAND CAN YOU HELP

    Q. I have an IPAD air having problems with my email deleting after a short while without command.

    I've had issues like this before.
    I ended up having to call my provide to reset the connection, which worked for a while, then quit. i then took it into my provider for a new sim card and had the connection re-established again. I haven't had issues since.
    hopefully for you resetting the connection with your provider will do the trick and a new SIM card wont be nessesary.

  • I am having problems with my Mac Book Pro, as it has started running very slowly.  Please find a copy of the etrecheck report - can anyone help.

    I am having trouble with my Mac Book Pro which I bought in August 2012.  It has suddenly started running very slowly every time I try to poen something.  I have completed an etrecheck report - can anyone help?
    Thank you
    Hardware Information:
              MacBook Pro (13-inch, Mid 2012)
              MacBook Pro - model: MacBookPro9,2
              1 2.5 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics 4000 - VRAM: 384 MB
    System Software:
              Mac OS X 10.7.5 (11G63b) - Uptime: 0 days 0:21:48
    Disk Information:
              TOSHIBA MK5065GSXF disk0 : (500.11 GB)
                        disk0s1 (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 499.25 GB (410.81 GB free)
              HL-DT-ST DVDRW  GS31N 
    USB Information:
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
    FireWire Information:
    Thunderbolt Information:
              Apple, Inc. MacBook Pro
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist Support
              [loaded] com.microsoft.office.licensing.helper.plist Support
              [running] com.MyBusinessWorks.backup.plist Support
    Launch Agents:
              [running] com.MyBusinessWorks.status.plist Support
    User Launch Agents:
              [loaded] com.adobe.ARM.[...].plist Support
              [loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
    User Login Items:
              iTunesHelper
              Dropbox
              AdobeResourceSynchronizer
    Internet Plug-ins:
              Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
              FlashPlayer-10.6: Version: 12.0.0.44 - SDK 10.6 Support
              QuickTime Plugin: Version: 7.7.1
              AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
              Flash Player: Version: 12.0.0.44 - SDK 10.6 Outdated! Update
              AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 Support
              JavaAppletPlugin: Version: 14.1.0 - SDK 10.7 Mismatch! Oracle recommends Java 7 Update 55
    Safari Extensions:
              Slick Savings: Version: 1.0
              Searchme: Version: 1.3
              Amazon Shopping Assistant: Version: 1.1
              Ebay Shopping Assistant: Version: 1.1
              AllMyTube: Version: 5.0.0.1
    Audio Plug-ins:
              iSightAudio: Version: 7.7.1 - SDK 10.7
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.3 - SDK 10.7
    User Internet Plug-ins:
              CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
    3rd Party Preference Panes:
              Flash Player  Support
              Flip4Mac WMV  Support
              MyBusinessWorks  Support
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   3%          WindowServer
                   2%          MyBusinessWorksBackup
                   1%          PluginProcess
                   1%          mdworker
                   0%          Microsoft PowerPoint
    Top Processes by Memory:
              197 MB          Safari
              152 MB          WebProcess
              131 MB          Finder
              131 MB          mds
              94 MB          MyBusinessWorksBackup
    Virtual Memory Information:
              1.67 GB          Free RAM
              1.34 GB          Active RAM
              343 MB          Inactive RAM
              670 MB          Wired RAM
              327 MB          Page-ins
              0 B          Page-outs

    It may be running slow because your backup program, MyBusinessWork, is running: running] com.MyBusinessWorks.backup.plist.

  • Having problem with svchost.exe/ntdll.dll errors causing GPSVC (Group Policy Client) to crash preventing users from logging into the server.

    Recently (within the past 2 weeks) I have noticed a few of our servers will have problems with the svchost.exe application causing the GPSVC (Group Policy Client) to crash. The only fix at that point is to reboot the server since the GPSVC service is tied
    to svchost.exe and therefore is protected from being manually restarted.
    I noticed the following errors when this occurs:
    Log Name:      Application
    Source:        Application Error
    Date:          7/23/2013 4:35:26 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Server1.xxx.xxx.net
    Description:
    Faulting application name: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
    Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
    Exception code: 0xc0000024
    Fault offset: 0x00000000000cd7d8
    Faulting process id: 0x46c
    Faulting application start time: 0x01ce877f9476ac07
    Faulting application path: C:\Windows\system32\svchost.exe
    Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
    Report Id: d252d26d-f372-11e2-8ad4-005056ac00e8
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-07-23T08:35:26.000000000Z" />
        <EventRecordID>158950</EventRecordID>
        <Channel>Application</Channel>
        <Computer>AAW19XM2.agency.nwie.net</Computer>
        <Security />
      </System>
      <EventData>
        <Data>svchost.exe</Data>
        <Data>6.1.7600.16385</Data>
        <Data>4a5bc3c1</Data>
        <Data>ntdll.dll</Data>
        <Data>6.1.7601.17725</Data>
        <Data>4ec4aa8e</Data>
        <Data>c0000024</Data>
        <Data>00000000000cd7d8</Data>
        <Data>46c</Data>
        <Data>01ce877f9476ac07</Data>
        <Data>C:\Windows\system32\svchost.exe</Data>
        <Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
        <Data>d252d26d-f372-11e2-8ad4-005056ac00e8</Data>
      </EventData>
    </Event>
    All of our servers are running Server 2008 R2 Enterprise where we use Citrix to deliver desktop sessions to our users, but some are virtual and some are physical. This seemingly impacts our virtual machines more, and our VMs are hosted through VMWare, however,
    about 5 months ago a similar error fired on a non-virtual machine:
    Log Name:      Application
    Source:        Application Error
    Date:          2/27/2013 6:57:58 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      AAW29033
    Description:
    Faulting application name: svchost.exe_gpsvc, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
    Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
    Exception code: 0xc0000024
    Fault offset: 0x00000000000cd7d8
    Faulting process id: 0x6c0
    Faulting application start time: 0x01ce14e1af313fd9
    Faulting application path: C:\Windows\system32\svchost.exe
    Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
    Report Id: ed3d01c4-80d4-11e2-9128-b499baa9e5e8
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-02-27T11:57:58.000000000Z" />
        <EventRecordID>286291</EventRecordID>
        <Channel>Application</Channel>
        <Computer>AAW29033</Computer>
        <Security />
      </System>
      <EventData>
        <Data>svchost.exe_gpsvc</Data>
        <Data>6.1.7600.16385</Data>
        <Data>4a5bc3c1</Data>
        <Data>ntdll.dll</Data>
        <Data>6.1.7601.17725</Data>
        <Data>4ec4aa8e</Data>
        <Data>c0000024</Data>
        <Data>00000000000cd7d8</Data>
        <Data>6c0</Data>
        <Data>01ce14e1af313fd9</Data>
        <Data>C:\Windows\system32\svchost.exe</Data>
        <Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
        <Data>ed3d01c4-80d4-11e2-9128-b499baa9e5e8</Data>
      </EventData>
    </Event>
    I've searched and cannot seem to find any information as to what may be causing this, or even really where to start. Would someone be able to help me identify what might be causing this event, specific with the Exception code: 0xc0000024, which causes
    the Group Policy Client service to stop?

    You still out there looking at things? If so I have an update. The issue hasn't stopped, even though it did seemingly die down for awhile, however, it is now back with a vengeance.
    I am able to force it to happen by killing the svchost process that is hosting GPSVC. If I run gpupdate /force, then logout/login it does get GPSVC running again. Furthermore, if I simply start svchost again via the Task Manager GPSVC starts running again.
    When I access the server remotely with KVM it acts just like it does as if I'm logging into it via Citrix/RDP which for Admin IDs gives an error saying "Failed to connect to a windows service. Windows could not connect to the Group Policy Client service...",
    however, normal user accounts just get a message when logging into the server "The Group Policy Client Service Failed the Logon. Access is denied."
    I haven't opened a case with Microsoft yet, but we about ready to because of the increase in these errors.
    If you have any further suggestions that would be great, otherwise I'll provide an update once I get word back from Microsoft.
    **EDIT -- apparently I mistook the the server's SCM's actions as my own. I was able to successfully crash the GPSVC service by killing the hosting svchost process, however, after I crashed it and let it sit crashed for awhile when I attempted
    to restart either by starting a svchost task, or running gpupdate /force it failed. Either that, or there is a timing issue where if we don't restart the svchost process, or run gpupdate /force quickly enough it won't be able to recover without a reboot.

  • I am having problem with my phne not being able to pick up any wi - fi service ?

    Does anyone have a similar problem with their Motorola phone ?

    Do you mean after a phone update? Do you mean just at home? Does it happen everywhere?  Do you have wifi turned on? If its on and your not connecting just clear out the connections (forget) then reset up the connections and see if that helps.  Did you get a Jelly Bean update? Many people have had wifi connections issues because your router is either outdated and not supported with the new os, or it needs a firmware update.  Post back with more information.

  • I was having problems with my Adobe Flash plugin crashing occasionally during my game playing on Facebook. After researching it on the Firefox Help site, I upgraded. It now takes forever to load, if at all, and loses the connection. What gives?

    The game eventually loads but now takes forever. If I switch to a different section of the game, it also is slow. It wasn't before I upgraded to the "new, improved" version. I was better off with the old Adobe plugin and putting up with the occasional crashing.

    The game eventually loads but now takes forever. If I switch to a different section of the game, it also is slow. It wasn't before I upgraded to the "new, improved" version. I was better off with the old Adobe plugin and putting up with the occasional crashing.

  • Anyone having problems with adobe reader. not being able to view email attachments?

    I have been recieving emails now for the last 9 days & I have not been able to view attachments  for some reason?

    Please provide some details.

  • I have been having problems with my iPod touch and my WRT...

    I have been having problems with my iPod touch and my WRT54G router. I am so frustrated right now because after following the various steps mentioned in one of these threads, following Earthlink's prompts, and speaking with Apple, my iPod touch will still not work. It is connected to the internet but will not download the pages. It is quite frustrating. I have changed from WPA to WEP, I switched the 4th Generated key to the 1st. I've disabled this, enabled that. I've done just about everything. I updated the firmware. I made the switch from a partial bridge to a full bridge. Still nothing seems to work. Does anyone have any other suggestions? The one thing I have not done is enter the Apple code into the iPod which searches for website...-- I cannot access the internet with my iPod so this web address does not work. If anyone has been successful, will you please give me step by step instructions? Yesterday I was on the phone with Linksys for about an hour. Before that with Apple for about an hour and before that with Earthlink. How it is that I can walk into a Bread Co. or Apple Store and immediately connect to the internet with my iPod but I can't in my own house?? Everyone seems to think it is someone else's problem so I've gone around and around. Not one of the Linksys support personnel suggested I look here on this community forum. I had to pay the $9 fee to have advanced Linksys help but still my iPod does not work and when I called back, the man I spoke with seemed to think the case was closed because my PC, Laptop, and iPod are connected to the internet -- the iPod just won't download the webpages or get mail. My iPod's IP address begins with 192. I would appreciate any help on this matter
    Message Edited by AlliW on 10-02-2008 02:06 PM

    I had the same issues with my iPod touch & iPhone. It's a known issue with the touch & Linksys G routers. Go into settings on the touch & do the following.
    1. Settings - wifi - linksys
    2. Erase your DNS settings & input same numbers as in router
    Settings.
    3. Http proxy should be
    in off position.
    4. Close out & open safari you should now have a wireless
    connection.

  • Are you having problems with Windows XP Pro and Airport Utility Updates?

    I was having problems with my wireless laptop setting up my Bonjour Printer. I checked to make sure I had downloaded the latest updates to Airport Utility and Bonjour. Check. After doing this I noticed I couldn't see my Airport Extreme through the Airport Utility. After much frustration and bringing my entire network crashing down around me, I got help from a knowledgeable guy from Cox Cable in San Diego. He helped me get my trusty iMac Power PC online. It saw my Airport Extreme but no answers were forthcoming in any forums about my XP issues. Here is what finally solved my problem. I uninstalled all Airport Utility and Bonjour Programs. I then went back to Airport Utility 5.3.1 for Windows. It installs Bonjour Printer services with this download. Everything is working perfectly again. I have my Canon Pixma MP500 connected to the USB port on my AEBS and Bonjour walked right through the setup process. I suggest that if this works for you, turn off all Airport Utility and AEBS firmware updates until you see that whatever issue Apple created with these updates gets fixed.

    Well... it worked! :D
    I'm pretty sure the extra 512 memory stick was the problem, that would explain why it was being inconsistent with its type of failures before. I'm going to reinstall it later and run memtest86 and try and see if i can get it to work at all somehow without causing problems, cuz 1.5 was already low enough...
    DryHeat, yeah it was with SP2 but I got it installed now so no worries
    Thanks a lot!

  • Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

    canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
    i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
    i set the printer to correct icc profile
    print out comes out same with glazed colors and missing tones/colors
    however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
    i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
    can  you please assist and thanks

    I've a Pro9000 and also use Colormunki successfully.
    When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
    Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

  • Having problems with itunes downloading continous mixes

    I am having problems since christmas update downloading continous mixes on albums. They eventually do download after a while,I get them from the cloud but they do not download when I purchase them. Previously everything was ok. What the story morning glory?

    having problems with iTunes Match?
    Yes, many people are.  If you are one of them, check out the forum devoted to iTunes Match.

  • Having problem with extra DDR2 for P45 Neo2

    Having problem with adding more DDR2 to my P45 Neo2. I currently have 2x hyperx 2gb ram installed, but I would like to take it up to 8gb. I had purchased another set, installed and pc wouldn't load. I installed these into another pc and they worked fine. What am I missing? I have tried googling but cannot find the solution to my question.According to MSI it will take DDR2 800/1066/1200. It does not mention what module name it takes eg pc 5300, which I'm quite sure are the ones installed. I have just updated the bios to the most recent should this help?

    Guessing you have all RAM related settings as "auto"?
    Does the PC work with your new set only?
    You may need to set the RAM timings&voltage manually in BIOS to common factors
    that are valid for both your new and old RAM kits.
    These settings you will do with your old kit in place, save in BIOS, exit and power down.
    Insert the new kit in addition, see if it POSTS. May take a few tests to succeed.
    CPU-Z program can help to figure some of the parameters.

  • I'm having problems with Twitter loading up a completely blank page and no longer displaying content and with Bloomberg not playing videos

    I'm having problems with Twitter not loading up content and showing me a blank page. I've tried to empty the browser cache but it doesn't seem to work.
    I also have issues with Bloomberg not playing videos

    Try clearing cookies and cache:
    [[How to clear the cache]]
    [[Deleting cookies]]
    Otherwise use firefox in [[Safe Mode]];
    Also try [[Troubleshooting extensions and themes]]

  • HT204085 I AM HAVING PROBLEMS WITH MY PASSWORD FOR MY ICLOUD

    I am having problems with my password to sign into Itune and ICLOUD account I have a ticket  Number is 609987250 do I need two different password for the  accounts I mintion

    I have done this and keeps saying the same thing. I have even tried setting my account through Microsoft exchange but no luck

Maybe you are looking for

  • HT5661 how do i change the phone number for a iphone

    I gave my iphone 4 to my husband and I now have a galaxy 4. Some of my iphone friends can not text me...what is th problem?

  • Airport Express now refuses to join my WDS

    My B/G Airport Express (Firmware 6.3) connected well to my N Airport Extreme in a WDS for 6 months. Then the Express failed to link in to the WDS. Resetting the Express and configuring using the latest Airport Utility failed. You progress through all

  • I am loading a video into Photoshop CC but getting no audio track

    When I load an mov or mp4 file into my photoshop CC installation. I get no audio track showing up. When I add the video as a wmv file, an audio track shows up, but the video pixels go to transparent as soon as I click the Play button (and I can hear

  • Can't boot from a USB

    Hi guys, Fist my laptop is a Toshiba satellite P870 and I've been trying for weeks but I can't boot from a USB, I mean, I've been used programs like: power ISO, ultra ISO, Linux live USB creator and nothing! But if I try to doing it in other notebook

  • Does anyone has multiple choice test about oop?

    Hi all. Do you have multiple choice test or questions require to give the result or find the errors in a code about oop in java? If you do, please shaze me! Thanks!!!!!!!!!