I am having problems with saving frames in compressor 4.0 from final cut pro x?

i get the following error message:
The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
thanks

hi Russ,
i was trying to export a sequence of frames into compressor.
since then i applied an update to FCP 10.0 and it is now working.
thanks.
Wasim.

Similar Messages

  • Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

    Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

    As far as I know, motion templates can only be used with DVD Studio Pro. FCP X only lets you add a background image to the DVD menu.

  • Problem with program hanging randomly on certain commands from win 7 pro client to SB Server

    Having a problem with program hanging randomly on certain commands from Win-7 Pro Client to SB Server Both 64-Bit
    Five other slower XP-Pro 32 Bit systems though they are older and slower systems do not seem to hang as readily if at all.
    It has been very frustrating as the Client-System, SB-Server and Program should work w/o any hitches, but this seems to work fine @ times and then hang randomly.
    Would appreciate any and all suggestions in assisting.... JimBAgde-MSS  

    You can try this, as I have had similar problems with another MS Access .MDB file and slow access before. This fixed my problem for me. On the slow computer, make sure the program is set to see the .mdb file via UNC path, not a mapped drive letter. ex.
    USE:  \\yourserver\shared\dental\file.mdb
    DO NOT: S:\\shared\dental\file.mdb
    hope this helps

  • I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

    I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

    SSign in to the App Store using the Apple ID that was used to purchase the software.

  • Can you upgrade from Final Cut Pro 3 to Final Cut Pro Sudio 2 with upgrade?

    Does anyone know if you can upgrade from Final Cut Pro 3 to Final Cut Pro Sudio 2 with $699 upgrade?
    I purchased Final Cut Pro 2 years back and then purchased the Final Cut Pro 3 upgrade. I have not used it in years, but now I want to upgrade to Final Cut Studio 2. Is this possible by just purchasing the upgrade?

    Apple's web page has the requirements:
    http://store.apple.com/AppleStore/WebObjects/BizCustom?qprm=78313&productLearnMo re=MA886Z/A
    The $699.00 upgrade version requires a valid serial number from a commercial version of Final Cut Studio, Production Suite, or Final Cut Pro 1, 2, 3, 4, or 5. Academic and not-for-resale versions are not eligible for this upgrade.

  • Is anyone having problems with the new Xerox printer driver update from Apple? My 8700S is no longer working with QuarkXPress.

    I allowed a System Update that included a Xerox Printer update. I am running a MacPro 10.6.8 with Quark 8.5.1 and a Xerox ColorQube 8700S.  EVERY was working perfectly before the "update" but afterwards anything sent to the printer from Quark would stall the printer.  I went to the Xerox website and downloaded their Printer Driver and tried again.  Now I could print from  Quark but I can NOT get to the printer window to change the type of paper, etc.  So, the problem still persists.
    Should I try going into Time Machine and trying to find the Xerox Print Driver in the Library folder?
    Should I upgrade the whole system software?  (I wouldn't mind doing that AFTER I get this magazine off to the commerical printer)
    Should I upgrade to Quark 9?
    Any help here would be apprciated.
    Thanks  - Rob

    As a general rule of thumb, I never install updates until I read its info and I am having problems with my current software.  I hide the updates until I need them.  Usually this happens when I update or upgrade my os.  I don't fix what ain't broken is my golden rule.
    It is possible that you need to update or upgrade Quark in order for your newer printer driver to work.  First I would try the following....
    Disconnect all peripherals from your computer.
    Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
    If your printer does not work afterwards, update or upgrade Quark.  If that does not work, contact the printer manufacturer.

  • I am still having problems with my music videos freezing (all purchased from iTunes) since the update.  Have restarted, rebooted etc. and it is worse than before.  Help!  Spent a lot of money on these and they won't play properly.

    I am still having problems with my music videos freezing (all purchased on iTunes) since the update.  The first day of the update, no problems...played 6 hours of music videos and no freezing.  Today...every single video froze!!! So frustrating!  I rebooted, restarted, powered down and no help.   I would appreciate any suggestions.  Thanks.

    I don't know how to do this without using a mouse point.
    This may help, http://www.computerhope.com/issues/ch000542.htm
    As for question #2, you call tell how iTunes is sorting songs by the up or down arrow next to a header name.
    Even the original order that the songs were entered or date added or last played can be sorted.
    Much easier with a mouse or touch pad.

  • Sync problem w/ DVD from Final Cut Pro X

    My project is a 2-hour play.  I improved the audio in ProTools then dragged it back into FCP.  I was able to get the improved audio to sync perfectly with the video (both are 48K), then mute the original audio.  I checked the whole 2-hour play for sync.  I burned a DVD, played it on my DVD player, and the audio gets ahead of the video around the 30 minute mark and keeps drifting.  Several DVD burns yield the same problem.  Any advice?

    Thanks Russ.  OK, I am now rendering again via Compressor 4, this time I have 2 files in one tab - 1) a MPEG-2 and 2) an AC3 file.  Seems to make sense.
    To burn the DVD immediately after, I added a 'Job Action' to 'Create DVD' after the render, and the dialog confuses me.  No problems with the 'Job Action' tab, but the "A/V Attributes" tab indicates the follwing:
    Type:  Final Cut Pro.app  (shouldn't this be a reference to the rendered file/s?)
    Video - showing the same dimensions of my FCPx Project file (NTSC  ..640 x 480)  instead of the MPEG-2 (Pal ...720 x 576).
    Audio - Properties show Linear PCM... 6 channels, etc... not the AC3 file.
    My question is, how do I create a DVD from the newly rendered files output from Compressor - is the Job Action the way to do it, and if so, how do I get it to reference the new files?
    Thanks,
    Geoff

  • Where do I find the frame rate of my project in Final Cut Pro?

    Shot in 24p. Can't find out where to look in Final Cut Pro to confirm that my project is still in 24p.

    To elaborate a little on what MtD's post, uUnlike Avid, There is no frame rate associated with an fcp project.  Sequences and Clips all have frame rates associated with them.  And be aware that 24p is actually 23.976 fps.  It is sometimes listed as 23.98 fps (just to make you crazy or crazier as the case may be).

  • Export to Blu-ray from Final Cut Pro 7 with LG BE12LU30 External Blu-ray

    Hi all
    I've got an iMac with Snow Leopard and I'm editing HD video in Final Cut Pro 7. I've created AVCHD discs on DVD to play in my Blu-ray player but now I want to create Blu-rays that will play in a regular Blu-ray player.
    Has anyone got any experience of using the LG BE12LU30 External Blu-ray Re-Writer with FCP 7? I've checked other posts and it seems one user has had success with an earlier LG Model.
    Basically if I connect this drive and use the Final Cut Blu-ray export option in share, will I be able to burn a playable Blu-ray?
    Any help would be much appreciated!

    Hi I have one of those drives too .. I use FCP to edit export the movie using 'current settings' and then import that movie Compressor .. alternative I also have Toast with the Blu-Ray plugin .. it gives a nice menu template and works well. http://www.roxio.com/enu/products/toast/plugin/overview.html

  • Exporting sequence from Final Cut Pro 7, some clips are pixellated and bad quality, does this have anything to do with the fact that I changed those clips speed?

    Hello,
    Bit of a beginner using Final Cut Pro 7
    Am currently trying to export a sequence using quicktime conversion.  Sequence has various filters and effects over it and when I export it some of the clips are pixellated and appear to have not exported correctly.  From what I can gather the affected clips have either been slowed down or made faster.  I am wondering whether this is the reason they have not exported correctly
    Any help would be appreciated
    Cheers

    More information needed.
    Codec of material?
    Sequence settings? (codec)
    fwiw - do not use quicktime conversion. Use Export Quicktime with Current Settings enabled then do any format conversions in Compressor.
    x

  • Is anyone else having problems with saving PDFs to disk?

    Recently, I have not been able to download and save PDF files on my iMac. Every time I download a file it is blank. The problem started several weeks ago and I thought at the time that the file was somehow protected. However, I successfully did a download and save to my old iMac G4 without a problem and opened it in Acrobat Professional 7, copied the file over to my Intel iMac with OSX 10.8.2 and opened the file successfully in Acrobat 10.
    Here are Acrobat specs
    Architecture: i386
    Build: 10.1.5.33
    AGM: 4.21.25
    CoolType: 5.8.121
    JP2K: 2.0.0.26663
    ADM: 10.01x33
    The same problem exists on my MacBookPro running identical software and OS as my Intel iMac.
    I faithfully upgrade my Mac OS software with each new release and do the same with my Adobe Suite software. The problem has to reside with the OSX 10.8.2 since things work normally on my old iMac G4.
    Does anyone know of a fix for this? I'm not going through the uninstall and reinstall process without exproring all avenues first.
    Dan

    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't work...
    To find out if it's system wide or user specific, try this...
    Open System Preferences>Users & Groups, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
    Does it work in the new account?

  • Still having problem with closing frame---Help me

    How can I make frame closing by clicking with mouse on button 'x' in upper right corner of window?
    When I put this in constructor
    setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
    I get error message:
    --------------------Configuration: j2sdk <Default>--------------------
    C:\javafile\Javabyexample\Projekat\Konverzija.java:17: cannot resolve symbol
    symbol : method setDefaultCloseOperation (int)
    location: class Konverzija
              setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
    Help me

    if you just want to close the frame use setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE)

  • HT1766 Having problems with my Iphone - my contacts have "disappeared" from my phone.  They are saved in I-Cloud.  Can I restore just the contacts to my phone?

    I have an I-phone 4S.  I have backed up my phone to I Cloud.  My contacts continue to completely disappear from my phone.  They are backed up on I-Cloud (I have checked that they are there, through my computer. 
    How can I restore my contacts to my phone from I Cloud?
    Thank you!

    If you've restored your phone as NEW and the problems persists, then you have a hardware failure.  You'll need to bring your phone into Apple for evaluation and probable replacement.

  • HT2204 I have 3 iphones and all use the same apple ID,how do I change this so each phone has its own id,do i restore the phones to factory settings first??as im having problems with contacts being added to and deleted from each phone.

    I have 3 Iphone 4S and all have the same apple ID which is causing problems as far as contacts are concerned,when i sync 1 of the phones to my comp the contacts appear on all the phones.How do i create a new ID for each of the phones do I have to reset the phones to factory settings first,any help would be appreciated.:)

    Hello marie196,
    Thanks for the question, and welcome to Apple Support Communities.
    You do not necessarily need to restore the device to factory settings, but rather sign out of the four services that utilize your Apple ID: iCloud, iMessage, FaceTime, and iTunes & App Stores. Once signed out, you can sign in with a new Apple ID. For more information, see the following article:
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    Additional Information: You may encounter an error regarding a 90-day limit. For information on this, see the following article:
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/HT4627
    Thanks,
    Matt M.

Maybe you are looking for