I am having problems with the charging port of my iPhone, it is not bring recognised on my laptop and directly to an electrical socket. Please what should I do?
I am having problems with the charging port of my iPhone, it is not bring recognised on my laptop and directly to an electrical socket. Please what should I do?
Check that the LCI in the dock connector of the iPhone hasn't been set off as shown in the article below:
http://support.apple.com/kb/ht3302
Try a reset aswel:
- hold the home button and sleep/wake button down for atleast 12 seconds
- release both buttons as soon as you see the apple logo appear
Similar Messages
-
Is anyone else having problems with the Canon Online Store?
In the last month or so, I've had one problem after another with the Canon Online Store; from being unable to delete items from the shopping cart; to not being able to add "in stock" items; disappearing Wish Lists; and just now, I tried to add one lens cap to the 6 or 7 items I already had in the Shopping Cart, and they disappeared.
I've called, more than once, and I've written, also more than once, to Canon Support about this, but they ignore what I tell them, and tell me there are no problems with the Online Store. They don't even seem to report to anyone that anyone has complained, because each time is "the first time", even though I've called (more than once) and written (more than once) to them about continuing Online Stores problems.
Is anyone else having problems with the Canon Online Store?
Why does Canon not care to track reported problems with the storefront part of their web-site?
I'm not trying to insult Canon, it's just that I've been a Canon customer for less than 3 months, and the're only batting .333, so far. Canon Support was very quick to respond about a concern I had that a 50mm f/1.4 I had just purchased was authentic or not. In trying to register that lens, I looked up on the Canon web site where to find the serial number. Since my new lens did not have any numbers there, I was concerned I had been sold a fake. But, then Canon Support sent me link to a different online document that showed a few different places where it might be, and there it was.
Is Canon like that with other problems, as well? Or is their "batting" average better than my very limited experience?
I just love my Rebel T5i, and my Canon lenses (from "the Kit brothers of the Cropped Frame coral": EF-S 18-55mm f/3.5-5.6 IS STM, and EF-S 70-300mm f/4-5.6 IS USM; to the "Truly Nifty Fifty", the 50mm f/1.4 USM, [the f/1.8 is just a "thrifty fifty"], and finally, the "Super-Macro" MP-E 65mm f/2.8 1x-5x Macro)!
Regards and Thanks,
Calen
As an old friend used to always say,
"Keep Looking Up!"
CalenHi Danny. Thanks for replying.
I only use my desktop PC to access Canon's web site, and I've been using Mozilla Firefox for years. And, yes, it is the latest version. Since Canon REFUSES to support the use of Firefox on it's web site, WHAT BROWSER DOES CANON SUPPORT? WHEN did Canon STOP SUPPORTING Firefox?
I've been told that there are 2 pending orders in my account. Yet, I NEVER placed those orders! WHY CAN'T CANON SEE THAT THIS IS A PROBLEM???
Instead of off-target suggestions, and pasted boilerplate REFUSALS TO EVEN LOOK at this issue, I would prefer it if Canon went "old school", and FIXED THE PROBLEM, in the first place! But, maybe that's a bit too grown up of an answer for you!
"Award-winning" support??? And, just exactly WHAT AWARD did Canon "support" WIN for CONSISTANTLY IGNORING REPORTED PROBLEMS??? The OSTRICH?
Please pull your head out, and FIX this problem, OR YOU ARE THE PROBLEM!!!
Thank you for your "prompt" attention to this matter!
Calen
As an old friend used to always say,
"Keep Looking Up!"
Calen -
I anyone having problems with the Sleep/Wake Button?? it doesn't do anything
I anyone having problems with the Sleep/Wake Button??
It doesn't do anythingif you press it and it does nothing, it may be broken. did you drop it?
try pressing and holding the top power button and round home button on the front for 6-8 seconds and you should see an apple appear.. if you do see the apple, the power button worked. -
Anyone having problems with the on/off switch
anyone having problems with the on/off switch. It sometimes does not work, I occasionally have to pull the plug out and replug then hit the button and it goes on?
Out of the 100+ millions of iPhone, I'm sure there are many people that have that same problem. If you do, you have a 1 year warranty... take it in before it runs out.
-
Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?
I have had the same problem but I seem to be getting somewhere to fixing it!!! My battery was going down at 20% an an hour now its 10% with constant use and 5 in standby !!! So improvement all round
First I did a restore then I drained the battery i started to charge it and when it came on I turned the phone off completely and let it charge to 100% I then left it for a couple of hours on charge at 100. I saw no improvement after 1st drain so I repeated the drain battery and charge steps again with the phone turned off when charging and have seen a very big improvement. I am going to do it again tonight and hopefully problem solved!!!!
The next issue is iMessage as that's playing up and wifi drop out
Good luck -
Hi there,
I writing this because I'm having some really big problems with my USB ports.
A few days ago I plugged in an USB-Hub that was quite cheap. Suddenly a window popped up saying that a USB device was deactivated because it "needed" to much power. Since this happening, two of those windows keep popping up everytime I boot the MacBook. I called Apple and got some help: I had to delete some .plist files and clear some caches. The man who helped was able to find the error and deactivate the notification, he also told me to make a PRAM- and a SMC-reset. The man said that it's just a software problem and that I have to reinstall the system if we don't find a solution. So, one day later I reinstalled the system (Lion) and not only didn't it help, the two notification windows were popping up again...everytime I booted the Mac. So I decided to formate the whole hard drive and install Snow Leopard -> still the problem with the USB ports. After that I installed Lion -> still the problem with the USB ports. I even tried to extract the .kext files that are important for the USB functionality from an earlier Combo Update, but it didn't help either. The point is, that the Mac doesn't recognize my external hard drive or any of my iDevices. Sometimes it recognizes USB sticks, but only after 20 seconds. The data transfer on both USB ports is also very slow. If I'm lucky and Mac recognizes one of my USB sticks, it takes like an hour for 1GB to be transfered on the USB stick or from the USB sticks to the Mac.
I really don't know what to do and need help, especially because my backup data is on my external hard drive which I can't access because of this problem.
I really hope that someone can help me, I'm very thankful for every answer that could help me!
PS: Sorry for my bad English, I hope that everyone understands what I mean, please tell me if you don't get what I'm trying to explain in the text above.
Sincerely,
iLoud
[UPDATE] I downloaded "USB Prober" and copied the Output file, maybe it helps:
Timestamp Lvl Message
0.698 [3] AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7316), outstandingIO(0), _interruptReadPending(false) - rearming read
0.698 [3] AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
0.735 [3] AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
0.735 [3] AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
0.735 [3] AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
0.739 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
0.739 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
0.761 [3] AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7320), outstandingIO(0), _interruptReadPending(false) - rearming read
0.761 [3] AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
0.798 [3] AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
0.798 [3] AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
0.798 [3] AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
0.801 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
0.801 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
0.823 [3] AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7324), outstandingIO(0), _interruptReadPending(false) - rearming read
0.823 [3] AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
0.860 [3] AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
0.860 [3] AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
0.860 [3] AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
0.863 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
0.863 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
0.885 [3] AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7328), outstandingIO(0), _interruptReadPending(false) - rearming read
0.885 [3] AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
0.922 [3] AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
0.922 [3] AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
0.922 [3] AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
0.926 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
0.926 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
0.947 [3] AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7332), outstandingIO(0), _interruptReadPending(false) - rearming read
0.947 [3] AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
0.984 [3] AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
0.984 [3] AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
0.984 [3] AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
0.987 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
0.987 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
1.009 [3] AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7336), outstandingIO(0), _interruptReadPending(false) - rearming read
1.009 [3] AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
1.045 [3] AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
1.045 [3] AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
1.045 [3] AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
1.049 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
1.049 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
1.071 [3] AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7340), outstandingIO(0), _interruptReadPending(false) - rearming readOh, sorry, I meant "I'm writing this...".
-
HT5047 Having problem with the iOS7 verifying update what should I do?
Having problem with the iOS7 verifying update what should I do?
Several other users have reported this same problem. Unplug the charger and then replug. It should resume to 100%.
Cheers, Tom -
My ipod touch is having problems with the headphone jack when I rotate a little song stops
my ipod touch is having problems with the headphone jack when I rotate a little song stops
Hey Silverdemon, sounds like a short, most likely in the headphones. Try a different set of headphones with this iPod or try the headphones with a different device. If the problem stops with your iPod or it moves to another device, then replace the headphones. If within 1 year of date of purchase Apple will replace the headphones for free if problem is a defect, not abuse. If the problem continues with a different set of headphones, check the port for damage and foreign debris. If you note debris, attempt to remove it, if damage noted contact Apple and set up an appointment to have it evaluated. if nothing appears wrong, try plugging / unplugging to jack about 12 times maybe corrosion on the contacts if so that should clean it. Next thing to try reset your iPod. After that try restore from backup. Last resort, restore to new. Just make sure you make a full backup to your computer before you restore so no data is lost. If nothing works, contact Apple and set up an appointment to have your iPod evaluated. Good luck, Cheers.
-
Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.
This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck
-
I had an dual display image / setup working twice for a few seconds, but then it cut out. I think there may be a problem with the thunderbolt port.
As far as I can tell you have only listed that you have a DVI monitor connected to the Mini Displayport socket (i.e. the Thunderbolt socket) via presumably the Apple Mini Displayport to DVI adapter and a DVI to DVI cable.
You don't appear to have listed what the second monitor is and how it is connected (even though not working). As such I cannot tell what may be wrong. -
I am having problems with the new itunes set up ........
when i plug in my iphone or ipod touch it shows in the top right hand corner of itunes
BUT when i click on the shown iphone/ipod the icon its no longer there, i was useing this fine yesterday and it was showing yesterday what is on this ipod and would allow me to add/remove music, but now this option is no longer availlable - i have added a couple of albums to my itunes i can listen to the music from the laptop but cannot sync the ipods to trancefer these albums to the handheld devices -
i have been trying to sort this all day with no luck not sure if there is a problems with itunes or is it something i am doing ????
HELP !!!!!!!!!!!!BOB we need you urgently
Perhaps Bob will see this thread, he is the professor in these cases.
You do not use a WEP password but wpa/wpa2 on router and equipment.
All equipment connects to WiFi, but for your iPad.
Even with all other equipment WiFi off, you cannot connect your iPad.
Your iPad connects to other WiFi nets correctly.
All resets etc done on iPad and Router.
Still I am not sure it is your router for sure, frustrating...
I want to test 2 other things:
1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect. -
I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help
Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac -
I'm having problems with excessive email usage on my iphone 4/ios 7. Just noticed that it (settings/usage) was using 900+ mb. I deleted all my mail, deleted the mail account, turned the phone off and back on, downloaded any remaining mail on the server to Outlook on my computer, and it still says it's using 661 mb. My ipad uses a fraction of that.
Background: I recently (December) bought an ipad and set up icloud for contacts and calendar, but NOT mail. My email provider is Verizon. I use computer, iphone, and ipad to check my email; eventually I download it from the server using Outlook on the computer and then delete any remaining emails from the phone and ipad. I can't find info on this problem anywhere.Howdy there COUGAR444,
It sounds like your iPad all of a sudden seems to be restarting out of no where. If you haven't called AppleCare yet, I would start with quitting either the app that seems to be causing the issue, or all the apps if a single doesn't seem to be the culprit.
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
If the issue persists, backup your device to iTunes, then restore it as new and verify that it works.
How to erase your iOS device and then set it up as a new device or restore it from backups
If it does, then restore your backup to either verify it still works and the software just needed reinstalled, or isolate the issue to the backup file itself.
Thank you for using Apple Support Communities.
Regards,
Sterling -
My iPod Touch (3rd Gen) is having problems with the touch screen being unresponsive, too responsive, freezing and constantly resizing. It varies between not responding when I tap the screen and acting as if I double-tap or tap and hold when I tap. Every so often it freezes for a minute or so and then comes back. The scren is constantly changing sizes too such that I often can't see most of the top status bar or other edges. This makes typing almost impossible, ruins most games and generally makes everything difficult, but otherwise the iPod is working correctly. Powering off, shutting down apps, letting it sit have not worked. This has happened once before months ago, but the issue resolved itself somehow. Is this a common problem? Is there a fix?
Try this for the freezing
http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
Or if they don't work put it into recovery mode
See here
http://www.apple.com/support/ipodtouch/assistant/restore/
Then restore
http://support.apple.com/kb/HT1414 -
hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.
Try reinstalling Combo Update.
http://support.apple.com/kb/DL1676
Best.
Maybe you are looking for
-
well my old iphone broke ish so when i conected it to itunes everyphoto i had when on my computer as a folder so when i got my new iphone i sync it to the computer but now every time i take a photo it goes into two seperate folders on my old folder a
-
Hi everyone, I was wondering if someone could give me a hand with the following. I am planning to create a simple search engine to search for products for a computer parts retailer. The list of products is stored in an XML repository , and all querie
-
I have tried to download a movie via iTunes. Every time the download nears the end, it stops and restarts from the beginning. This has happened 5 times. How can I clear the download or solve this?
-
Hi , I addEnviornment details to Context object as soon as user logons to the application . The user is validated against Weblogic Integration Server and then context is made and store in Session. I pass this context object to make a lookup on a sess
-
Remove Personal Domain from MMe
I have added a Personal Domain to a MMe account. However, the domain transfer process is going to take a few more days, because of the grace period built into the process. As soon as I added the personal domain name in MMe (I have not clicked the "Do