I am having Problems with using my adobe digital Reader ,it gives me the error E_ADEPT_IO Activation

i am having Problems with using my adobe digital Reader ,it gives me the error E_ADEPT_IO Activation,what can i do to activate

This is the Adobe Reader forum. If you are talking about Digital Editions, the right forum is here:
http://forums.adobe.com/community/adobe_digital_editions

Similar Messages

I am having problem with using the Basic brush definition

I am having problem with using the Basic brush definition. When I try to click on it will not allow me to use it and will automatically use the 5 pt. oval brush definition. The only way I can use the basic brush is after I have already drawn something and then I have to click on the stroke and then press basic. This is incredibly annoying and if anyone could help I would greatly appreciate it. (I have Adobe CS6)

for whatever reason, the basic 'brush' you see in the brushes palette effectively means removing any brush from a path. to draw with the brush tool you need a brush defined. in your case the last one selected being the 5 pt oval one.

I am having problem with using my Basic brush definition

I am having problem with using the Basic brush definition. When I try to click on it will not allow me to use it and will automatically use the 5 pt. oval brush definition. The only way I can use the basic brush is after I have already drawn something and then I have to click on the stroke and then press basic. This is incredibly annoying and if anyone could help I would greatly appreciate it. (I have Adobe CS6)

Basic is not a brush, only a starting point for you to make a brush. Load the real brush you want before beginning to draw.

Having problems with using shift alt command when using the square tool

having problems with using shift alt command when using the square tool

Marco,
If no good reason, such as the one suggested by Silkrooster, is present, you may try the list, hoping for one of the easy ones at the top.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

I'm having problems with quizzes in Adobe Presenter 10

I'm having problems with quizzes in Adobe Presenter 10, upon publishing, the text just disappears and the buttons look weird, also the text on submit buttons doesn't show?

I created a dummy test project with one slide and two quiz questions. I uploaded to a Connect 9 server for AICC testing.
Publishing as SCORM, running in IE8 gets the following results:
Publishing as SWF gets me the following errors:
          Webpage error details
          User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC LM 8; InfoPath.3)
          Timestamp: Mon, 11 May 2015 20:53:59 UTC
          Message: Expected identifier, string or number
          Line: 101
          Char: 5
          Code: 0
          URI:<REDACTED>/data/html/presenter.libs.js
After I close this error, my LMS just churns trying to load SCORM.htm.
Publishing as Both gets me the following errors:
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC LM 8; InfoPath.3)
Timestamp: Mon, 11 May 2015 21:07:30 UTC
Message: Expected identifier, string or number
Line: 1
Char: 467
Code: 0
URI: <REDACTED>/data/html/Project.js
          Webpage error details
          User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC LM 8; InfoPath.3)
          Timestamp: Mon, 11 May 2015 20:53:59 UTC
          Message: Expected identifier, string or number
          Line: 101
          Char: 5
          Code: 0
          URI:<REDACTED>/data/html/presenter.libs.js
After this error I get an object expected error on the "loadPrContent()" function in the SCORM_utilities.js.
After that it's just a blank page.
Publishing AICC to a Connect 9 server, publish as BOTH, Accessing in IE8 gets the following results:
               Webpage error details
               User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC LM 8; InfoPath.3)
               Timestamp: Tue, 12 May 2015 19:19:45 UTC
               Message: Expected identifier, string or number
               Line: 1
               Char: 394
               Code: 0
               URI:<redacted>/output/data/html/Project.js
               Webpage error details
               User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC LM 8; InfoPath.3)
               Timestamp: Tue, 12 May 2015 19:21:49 UTC
               Message: Expected identifier, string or number
               Line: 101
               Char: 5
               Code: 0
               URI: <redacted>/output/data/html/presenter.libs.js
               Webpage error details
               User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC LM 8; InfoPath.3)
               Timestamp: Tue, 12 May 2015 19:23:00 UTC
               Message: Syntax error
               Line: 1
               Char: 1
               Code: 0
               URI: <redacted>/output/data/resources/ha/wr_/OpenAjaxManagedHub-all.js
After closing the final error message, I get a blank screen.

Is anyone else having problems with syncing photos on ipad - seems to be fragmenting the events

Is anyone else having problems with syncing photos on ipad - seems to be fragmenting the events

Here's the problems I'm having with iPad 2 and iOS 5.1:
Okay ... so, because I had less than a 1 Gig left (as reported by iTunes) on my 64Gig iPad, and the majority of the space was being used by "Photos" ... I decided to not keep my PC photos directory in sync with my iPad (Windows 7). So, in iTunes, I unchecked the option to sync computer photos to the iPad. I got the standard popup warning message that my iPad would not contain those albums after the next sync. I clicked OK and proceeded to sync expecting to have lots of space freed up.
But weird things happened after syncing.
(1) I still have all my photos on my iPad .... nothing disappeared at all. (And performed multiple syncs to try to force the change ... still nothing has been removed from my iPad.)
(2) Somehow, I gained 20 Gigs of free space, as reported by both iTunes and my iPad as well.
Anyone know what's going on here?
I do have iMovie and another movie making app, Avid. Both of these contain projects that refer to photos in albums that were supposed to be removed after the sync ... but I can't imagine that would keep them there. Anyone have any ideas?
I also installed the iPad app, iPhoto. I noticed that it build a directory listing and continuously want to update that listing from time to time.
Would any of these things cause the iTunes photo sync changes to be ignored? And, how did I get free space to report back with an additional 19Gig or so, when there's no change at all.
Unsure what's going on ...

Having problem with my iphone camera,doesnt work when i click the camera app,but it does work when i double click when my phone is off.

having problem with my iphone camera,doesnt work when i click the camera app,but when i double click when my phone is locked it works.

The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

TS1702 Having problems with Security questions to be able to download from the iTunes store

Having problems with Security questions to be able to download from the iTunes store

Security questions
Read this note for information on how to reset the security questions http://support.apple.com/kb/HT5312
This user tip may also help you Security Questions

I want to remove an add on becauase I've been having problems with FIrefox locking up since I installed. How the heck does one remove an add-on. I hate to be stupid but I cannot figure out how to uninstall an add on

I've been having problems with Firefox 4.0 locking up pretty much since I installed it. I did add a few add-ons and all I can think of to do is to remove them. I can't figure out how to get rid of them.

Well, When I click on Add-ons I don't get a list of add-ons. AN Add-ons tab opens which shows lots of other great add-ons but I can't get a list os ones that I've installed and have no option to remove. I'm on version 4.0. Maybe the "remove" as described is for an earlier version?
Nevermind, figured it out. Had to click on "Extensions" on the left side of the page to get the list
Thanks

SOLUTION: Are you having problems with using HDV, FCP X and iDVD?

If you edit HDV (TAPE) in FCP X and want to burn the video in iDVD you will find the following problem . . . iDVD squashes the image as shown in the screenshot below.
Whether you export as ProRes or H.264, iDVD will see it like this as a squashed image.
This is because iDVD does not recognise HDV anamorphic images unless they are in the Apple Intermediate Codec.
There are 2 solutions to this problem:-
1. Create a ProRes 422 Custom Compressor Preset with a frame size of 1920 x 1080.
The only downside to this is that the conversion process in my 2008 iMac takes about 5 times realtime.
2. Create an Apple Intermediate Codec preset for HDV. This encodes on my iMac in around realtime, so it is at least 4 times faster than the ProRes solution.
Unfortunately, if you have Compressor 4 you cannot create Apple Intermediate Codec presets, but Compressor 3.5 will and what is more important, that preset can be installed in Compressor 4.
So you can export your HDV project from FCP X using Compressor Presets in either ProRes or AIC and use the resulting file in iDVD to get a correctly proportioned image like this.
I prefer to use the AIC preset as it is 4 times faster and there is no quality difference on the final DVD.
What do you do if you haven't got Compressor?
Well you can email me for a 12KB copy of the preset as I believe FCP X can use it even though you don't have Compressor.

Ian,
Thanks for the tip!

I am having problems with sign up ps vita I am not receiving the email from Sony for verification.

Ps vita not signing up

I have the same problem with my PS4. On Friday 26th I registered on SEN. I received an acitvation e-mail where I have to verify my e-mailadress. I clicked on the link in the e-mail and I can't reach account.sonyentertainmentnetwork.com because of the server outage.
So, i kept the mail in my mailbox and today as I wanna try it again as I can log into PSN on my PS4 but only to the screen where I have to verify my e-mailadress, i get the message that the link I used is no longer active (+24h).
In the meanwhile i requested to resend the mail app. 40 times, without any success.
Dears, the PSN is working and I wanna try my new PS4. It can't be so hard to resend an activation e-mail, isn't it?
Please, hurry up!!
Thank you!
DYN4M1X_88

Problems with view in Adobe Digital editions

Some equation images (gif/jpeg) view perfectly fine and they are not corrupted. But these math images do not display fine in Adobe Digital Edition, whereas
the same displays fine in MobiReader. Require a permanent solution for this issue soon

I use a Dv500 with Premiere 6.02 to digitize 8mm analog camcorder tapes, and the resulting files are exactly like the original tapes http://www.pacifier.com/~jtsmith/ADOBE.HTM
Digitizing from an analog tape is what is known as "capturing"
If you are only TRANSFERRING from a digital tape camcorder via the firewire connection, your Dv500 is not doing anything at all to the video... it is a simple COPY of the video from tape to computer, since the video file is already in digital format
More details are needed... such as camcorder make and model... and are you really doing a firewire transfer, or are you digitizing from analog?

Having problems with gaming and joy pad controller - We can hear the game through the TV but cannot see picture - Please help!!

We are having issues with gaming and using the Joypad controller. We can hear the game sound come through our TV but there is no picture. Please Help!!

You need to mirror to be able to see the game, which requires an iPad 2 (or later) or iPhone 4S
http://support.apple.com/kb/HT5209?viewlocale=en_US&locale=en_US

Problems with authorizing on Adobe Digital Edition

I can't get Adobe Digital Edition to Authorize on my new computer so that I can download books from Kobo Store to my Sony ereader. Each time I try it comes up with and error message.

<<Topic moved to Digital Edition Forum>>

Adobe digital 1.7 will not activate Error =E_ADEPT_IO ActivationServiceInfo Error%20#2032

I cannot activate adobe digital 1.7 - the error isg is E_ADEPT_IO ActivationServiceInfo Error%20#2032
Can anyone let me know what that is?
Please

I Finally got mine to work. I hadn't changed anything on my computer, but it just started giving me this error and the E_ADEPT_DATABASE error out of the blue. Nothing really worked. I tried redownloading the program, restarting my computer, changing my internet settings to "automatically detect...", yelling, anger, sadness, evil eye.. you get the point. Anywho, after several successful attempts, this is what works for me:
By the way, I run Win 7 and mainly use ff. Unfortunately, FF does not work with this.
Using the search bar in Win 7, type in "Allow". This should pop up the link to "Allow a program through Windows Firewall". Clickety-click.
Click on the button that says "Change settings". (Maybe be fast or slow).
If Adobe Digital Editions is listed, click it (I have home/work checked but not public). If it is not listed - Click on "Allow another program.." (really that what the button says. Find Adobe Digital Editions and click.
Click on OK.
Open the acsm link through Internet Explorer (FF won't work). It should download no problems.
I have tried this with FF and it did not work. I had to go back and "Allow" ade again.
Works in IE if I automatically detect... or not.
Is still annoying because it worked fine before. I want things back the way they used to be!
I know that this is somewhere on the Adobe site but I had a hard time finding it.
I know I talk too much but wanted to explain in detail (yes, I know it's a lot of detail.

I am having Problems with using my adobe digital Reader ,it gives me the error E_ADEPT_IO Activation

Similar Messages

Maybe you are looking for