I am having some serious problems...

iTunes deleted all the music on my iPod nano 7 when I was trying to put some video on it and now I'm trying to put the music back on, but iTunes won't let me...?

Sorry to hear about the issue you are facing.
There is an updated print driver for your product which was released:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=3883...
Check if this newer print driver helps.
To answer your other query about selecting a different size media vs inputting different size, the printer actually does not allow it to protect it from overspray on the carriage.
I work for HP.

Similar Messages

NEED HELP HAVING SOME SERIOUS PROBLEMS WITH X-FI PLATI

My sound card is only about 2-3 weeks old and was running fine uptill about a few days ago then it started having some problems the first was it wouldn't play audio in windows media player movie or music, it worked fine using other programs to play movies or music. Another problem I'm gettin is that the volume will be much lower than it should and this doesn't matter what program I use this does go away sometimes although I still dont know what causes it. I'm also getting intermittent sound problems in BF2 like not hearing sound when I switch to rear view which didn't happen before. I've tried trouble shooting it myself but to no avail. I tried installing it on my other hard dri've which is clean but even though I did a full installation it won't even recognize the card and says there is a prolem with the drivers. I can't understand why my sound card won't work on my second hard dri've and why I am having problems with it on my first. If anyone could help me with this problem it would be greatly appreciated. By the way I have a DFI LanParty NF4 Sli-DR, AMD Atholon 64 3000+, XFX 6800GS PCI-Express 256MB, 2GB OCZ Gold Dual Channel DDR 400,Ultra 500watt PSU, Logitech Z-5500 5. Speakers. My first hard dri've is a Western Digital Caviar SE6 SATA 2 and my second hard dri've is a Hitachi Deskstar T7K250 SATA 2, they are both 250GB and are seperate they aren't connected to my motherboard or even on at the same time.Message Edited by RogueChaos on 05-3-2006 05:05 PM

No help, but i agree with skullcracker!!! Return it ASAP!! You will thank us for this vital information!!!Message Edited by HaZe303 on 05-4-2006 06:29 AM

My iPhone is having some serious problems. I would like to have some feedback on how I should fix these problems. My newly bought iPhone 5 has being shutting down on me at various times unexpectedly for no reason also my battery has begun to decrease

My iphone5 has been glitching. Shutting down randomly and only working on certain chargers. Also the battery dies fast. Decreasing rapidly within hours. Even when barely in use and with no apps open. I need help! Please give me feedback! Thanks you

Some iPhone 5's had defective batteries. See if yours was one of them: iPhone 5 Battery Replacement Program - Apple Support

My Client is having a serious problem with the Contact Form Widget

My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
When I look at 'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed? If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field. My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
Can anyone help me figure this out? I really don't want to disappoint my first client.

Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form. You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan. This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents". Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues. On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get. You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later.

I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look

I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look normal when I first open them in photoshop. I will edit, save, and then realize once i've sent it to myself to test the color is WAY off. This only happens in photoshop. I've read some forums and have tried different things, but it seems to be making it worse. PLEASE HELP! Even viewing the saved image on the mac's pic viewer is way off once i've edited in photoshop. I am having to adjust all my colors by emailing myself to test. Its just getting ridiculous.

Check the color space in camera raw, the options are in the link at the bottom of the dialog box. Then when saving make sure you save it to the srgb color space when sending to others. Not all programs understand color space and or will default to srgb. That won't necessarily mean it will be accurate, but it will put it in the ballpark. Using save for web will use the srgb color space.

I am having some serious issues with firefox, i can't print anything because it is stuck on fax and I can't use any of the drop down menus on any site

I am having some serious issues with firefox to the point of choosing another search engine. I can't print anything because it is stuck on fax and won't let me change it to my printer when i do try to select my printer it jumps right back to fax. The drop down menus do not work on any of the sites I go to. For example when purchasing clothes and you have to choose a size from a drop down menu I can't do it when I click on the drop down menu it doesn't work at all. I don't have a virus I ran my virus protector and no viruses are present. I don't have any suspicious issues going on with my computer so there has to be something in Firefox that is causing my issues. I tried internet explorer and I don't have any issues there. I hope you can help me because I love Firefox and would really like to continue to use it.

Lots of issues there, main one getting fcpx going again, try deleting the preferences using the utility deveoped by these guys.
http://www.digitalrebellion.com
Try deleting your render files and re-rendering the project.
Start with these and let us know how you go.
Tony

My computer has some serious problems, my iphoto only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos has a large delta with a question mark. also I can't back up

my computer has some serious problems, my iphoto only shows only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos had a large delta with a question mark. also I can't back up the library file because its not there. I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place. I also lost my Idvd file, only have broken chain showing.

Details please
What version of iPhoto and of the OS?
i tried to rebuild my files from folders that had the pics in them.
Exactly what did you do and how did you do it? this ay be the cause of your issue but without details we can n=ony guess
my iphoto only shows only shows thumb size pics when I try to open them,
where do you see htis? In the iPhoto window? what does "try to pen them" exactly mean?
originally all the photos had a large delta with a question mark.
Ok - this usually has a simple solution - do you still have a copy of the library that has this problem?
also I can't back up the library file because its not there.
This makes no sense at all - all of your previous statements indicate that you do have an iPhoto library but have some problems with it
By default your iPHoto library is located in your Pictures folder and is named iPhtoo library - if tha tis not the case the you have moved or renamed it and only you know what you did until you tell us the details
I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place.
Again unless you actually share what and how you are doing thing but continue to simply state abstract problems it is no possible to assist you - details on using Time Machine are here -- http://support.apple.com/kb/HT1427?viewlocale=en_US&locale=en_US -- and -- http://pondini.org/TM/FAQ.html ---
I also lost my Idvd file, only have broken chain showing.
This would be better addressed in the iDVD forum - but again unlesss yu share detailed information no one can assist
LN

Some serious problems with Mountain Lion

Hi everyone,
I upgraded my mid 2010 15" MBP to Mountain Lion 2 days ago, and I have some serious problems with my machine now.
- Wifi problem: like many members 's machines, mine has problem to connect to the wifi after sleep or restarting, I had to wait 10 to 15 minutes for it to connected to my home network. Anh I tried to remove all of my settings in System Preferences/Network and added new connection. And now it cant connect to wifi anymore. I'm writing this article while sitting on the floor with my Ethernet cable plugged in my MBP. I connected to internet through a DSL modem and a Airport Extreme as a bridge and Access Point. I also tried to set up all of my network device but my MBP can't connect to the wifi still.
- Keyboard problem with Pages: I was very happy with the new iCloud syncing for Pages documents but after 5 minutes, I met a big problem with Mountain Lion. Whenever I type in Pages with Vietnames Keyboard( Mac OS X built in or from another developer: http://www.trankynam.com/gotv/ ), Pages stops working immediately. I can still drag the Pages's window around but can't type or do any editing. After that I have to force quit pages. It is really stupid that I'm writing a book in Pages and now I have to stop my working till apple fixes this ridiculous bug. I tried German Keyboard as well and Pages worked flawlessly. Do you hate Vietnamese, Apple?
- Messages problem: Since upgrading to Mountain Lion I couln't send or receive any messages. It worked perfectly in Messages beta.
Does anyone have the same problems like me? Any solution such as how to reinstall Messages(I googled but found nothing)
Apple, please test your software more before release it. I feel like I have no computer at the moment because I can't work, can't surfing the web wirelessly and can't communicate with my friends.

HI,
- Messages problem: Since upgrading to Mountain Lion I couldn't send or receive any messages. It worked perfectly in Messages beta.
Does anyone have the same problems like me? Any solution such as how to reinstall Messages(I googled but found nothing)
What Messages to what type of Buddies or Contacts ?
This
I found out that the problem with my wifi was my MBP received automatically a ridiculous IP such as 169.254.170.0 instead of 192.168.1.4 as it should be.
WIll be part of the Issue as will be DNS issues.
mDNSresponder crashed with Handsoff! v1.5.3. After upgrading Handsoff! to v2.0.2, it works again.
In this case mDNSresponder also being stopped will stop DNS working.
I would guess if you have resolved these that you can Chat to people again.
4:33 PM Friday; July 27, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

MY IPAD 3 HAVE SOME SERIOUS PROBLEMS

Hello Everyone
I have a 16gb ipad 3 and it got problems , since i updated it to the new version i had some serious problems ,
My ipad will not turn on when it plug in to the charger that on the wall or my ipod dock that i normally charge it on , it come up with the battery signal when it on charge and in the battery signal theres red lines through it and it goes to the apple logo after that it turns off and starts it again , ive reboted it , ive downloaded itunes agian to restart it that way but it wont come up on it at all . it starting to **** me off .. it has run off the 9o days or so period .. my last report that is to ring them to see if they can help . My ipad has a lock on it too and it has never done this before .......
Thanks Everyone
From Australia xx

Hello Krystal,
I would be concerned too if my iPad was not charging. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below (these steps refer to an iPhone, but the steps also are relevant for an iPad):
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Once you get your iPad running again, follow the steps in the article below if you do not recall your passcode:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Thank you for using Apple Support Communities.
Best,
Sheila M.

Having Some Real Problems with SSI

Please forgive me if my questions seem inexperienced. I am
just learning how to incorporate server side includes into a new
site I'm working on and am having some real problems getting things
to work properly...
I have been reading everything I can find on SSI's, and have
finally got everything to work properly on my local system,
however, now, I'm having issues after uploading the files to my
server (IX Web Hosting).
According to this document (“How to incorporate
Server-Side Includes into an HTML page “) from the Adobe
Knowledgebase, step number 4 says to…
Text
“Highlight all the text displayed in black and delete it.
The HTML inspector should contain only the information in red. It
is especially important NOT to have <html>, <head>
or<body> tags in the SSI, because this will cause the HTML on
the page to become invalid once the SSI is inserted.”
Text
Well, I tried that, but the code just looks exactly as it
does in the code viewing pane. No RED characters anywhere! So I
just deleted all the <html>, <head>, and <body>
tags and saved the file.
Now, when I insert the SSI into a new html file (which I
saved as .shtml because that’s what my web hosting provider
requires) everything looks great on my local system, but when I
upload the files to my server and try to test the page with the SSI
inserted into it, I get the following error message:
HTTP/1.1 404 Object Not Found Server: Microsoft-IIS/5.0 Date:
Sat, 05 May 2007 19:42:48 GMT X-Powered-By: ASP.NET Connection:
close Content-Type: text/html
404 Object Not Found
Both files are located in the same directory (maybe
that’s a problem?)
My question is simple, exactly what should I absolutely NOT
delete out of the source SSI file? Is there some part of it other
than the content I want to reference that needs to stay in there?
Also, both my server side include file and the html file that
references it are saved with the .shtml extension. Is this wrong?
Or does the ssi file need to be saved with an.ssi extension?
Again, sorry for the amateurish questions, but we all have to
learn sometime right?
Any help would be greatly appreciated!
Thanks,
~Greg

Here's an shtml skeleton page -
<html>
<head>
<title></title>
</head>
<body>

</body>
</html>
and here's 'foo.html' -
<p>Hello world</p>
Does that help?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Myrrhlin225" <[email protected]> wrote in
message
news:[email protected]...
> Please forgive me if my questions seem inexperienced. I
am just learning
> how
> to incorporate server side includes into a new site I'm
working on and am
> having some real problems getting things to work
properly...
>
> I have been reading everything I can find on SSI's, and
have finally got
> everything to work properly on my local system, however,
now, I'm having
> issues
> after uploading the files to my server (IX Web Hosting).
>
> According to this document (?How to incorporate
Server-Side Includes into
> an
> HTML page ?) from the Adobe Knowledgebase, step number 4
says to?
>
>
Text
?Highlight all the text displayed in black and delete it.
> The
> HTML inspector should contain only the information in
red. It is
> especially
> important NOT to have <html>, <head>
or<body> tags in the SSI, because
> this
> will cause the HTML on the page to become invalid once
the SSI is
> inserted.?
Text
>
> Well, I tried that, but the code just looks exactly as
it does in the code
> viewing pane. No RED characters anywhere! So I just
deleted all the
> <html>,
> <head>, and <body> tags and saved the file.
>
> Now, when I insert the SSI into a new html file (which I
saved as .shtml
> because that?s what my web hosting provider requires)
everything looks
> great on
> my local system, but when I upload the files to my
server and try to test
> the
> page with the SSI inserted into it, I get the following
error message:
>
> HTTP/1.1 404 Object Not Found Server: Microsoft-IIS/5.0
Date: Sat, 05 May
> 2007
> 19:42:48 GMT X-Powered-By: ASP.NET Connection: close
Content-Type:
> text/html
> 404 Object Not Found
>
> Both files are located in the same directory (maybe
that?s a problem?)
>
> My question is simple, exactly what should I absolutely
NOT delete out of
> the
> source SSI file? Is there some part of it other than the
content I want to
> reference that needs to stay in there?
>
> Also, both my server side include file and the html file
that references
> it
> are saved with the .shtml extension. Is this wrong? Or
does the ssi file
> need
> to be saved with an.ssi extension?
>
> Again, sorry for the amateurish questions, but we all
have to learn
> sometime
> right?
>
> Any help would be greatly appreciated!
> Thanks,
>
> ~Greg
>
>

Does Lion support MS Office for Mac 2011? The RoaringApps compatibility list shows Office 2011 having some unspecified problems with Lion.

Does Lion support MS Office for Mac 2011? The RoaringApps compatibility list shows Office 2011 having some unspecified problems with Lion. Any confirmation yest showing compatibility with Office 2011?

I'm running MS Office 2011 on Lion and it runs just fine. No "Full Screen", but it runs just fine. There may have been an update to install (I know there was an iWork one anyway), but even before I installed any updates Office '11 worked just fine.

Dragon Writer MS-8348B having some bad problems.

I actually don't have the 8348B, I have a Verbatim but it's the same rebaged drive(BenQ 4816p) and I'm having alot of problems, mostly the same problems that other people are having. The drive initially would recognize some cheap media at 40x MAX but when I tried to write at that speed the drive makes a loud buzzing noise(like really fast clicking), and when it was done writing I look at the media and only see sporatic written dat on it, it's skipping all over the place. When I tried to write at a slower speed(16x) it either writes really slowly (slowing down to 1x or 2x) or it just burns coasters. I have the A.UZ driver, should I expect this to happen continuously or is it just my media that's bad?

I had the exact same thing, I returned it back to the store I bought it from and I'm supposed to get a new one in three weeks.
P.S. Has this drive done it since you bought it or did this just start recently?

Having some serious software probl

Ok, So I have a Creative Labs Zen MicroPhoto and i'm have some serious software problems. I plug in the mp3 player and the computer reconizes it but when it goes to install the software, a pop up comes up and says that the computer has had a problem installing the software. I don't know what to do, I've went through every possible way i know and I work with computers. Could someone please help me!?-John

Michael Black wrote:
What is on? Push mail? If using fetch, automatically (how frequently) or manually? What about notifications? Do you have wireless on and is it set to "ask to join"? Bluetooth on? What about app settings, like a news reader that is auto-updating or anything like that (eg. NYTimes app can be set to autoupdate)?
All I can think of to check off the top of my head.
All good valid items....but we are talking 8min of usage over a 2 hour period draining 36% of his battery. Seems to indicate some other issue.

Alright, some serious problems (WRT54GS)

Alright, here's my problem. I've tried searching many places and haven't really been able to get an answer to help me. I hope someone here can change my luck. Ok, so, I got this WRT54GS just a few days ago. Here's my problem. I tried to install it using the CD that came with the router, to no avail. With everything the way it is now, I can connect to the internet. The problem is that during the CD installation, I can't get past the step where I have to detect the router.
Everythings connected properly, but it won't work. After searching for a bit, I found out that you could also install it without the CD using the web based utility. Unfortunately, when I tried to access 192.168.1.1 I get a, "Error loading page" rather than a password prompt. The main thing I want to use this for is Wifi for my Wii and DS, as well as something for my laptop to connect to. All 3 can find the router when I do a search for access point, all 3 can connect to the router. None of them can get on the internet from that point onwards though.
I'm using an ambit cable modem router with cable internet. My OS is Windows XP SP2. I don't know if either of these helps, but I figured it might be useful.
I've tried resetting several times, unfortunately to no avail. I'd like it if someone can help me out.
I'm not a complete idiot, so if you need a screenshot of anything, and I can follow directions pretty well, so anything to help is appreciated.
Message Edited by Ruoivas on 04-05-2008 08:49 PM

I guess I'm not alone, I've got the same thing going with the same router, but DSL modem. I also remembered from previous router to not use the CD but the web-based configuration technique. Incidentally, did you maybe follow some directions that had you save to 192.168.2.1 instead of the default 192.168.1.1 (which my DSL modem is using).... Hope someone can give us all a magic bullet - there are other threads with the same general problem, and I gotta tell you it sucks having to work from home on a 49.2 dial up session...I have no clue as to why I can't plug the DSL line directly into the laptop and get a better connection. Sorry, no help to you other than commiseration....

Having some skype problems

i am like having skepe saying on the top bar not responing at times but i find nothing about it in the event viewer. Also I am not sure if my friends messages are showing up for me or if mine are for them. it was doing fine a few weeks ago but now it seems like its having problems. i am not sure if they are send the messages or if there is a problem going on.
It seems IE and adobe flash is for it is up to date .
Attachments:
DxDiag.zip ‏15 KB

Try to reset all Skype settings.
Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old.
Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder.
Restart Skype.
N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

I am having some serious problems...

Similar Messages

Maybe you are looking for