I am having the B200 error which is a major problem. I have followed the directions without luck.

B200 error. What must I do to fix the problem? I have removed the ink and printer head and unplugged for 10 min. The MP620B still fails to work.

Hi CW63,
If you have already tried reseating the print head without success, the printer would require service. I recommend using the Contact Us link to get in touch with our support staff who can provide available service options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

When trying to do a recover and update an old iPod touch, "unknown error" occurs and nothing happens. I have followed all the trouble shooting suggestions but nothing works. Ideas?

When trying to do a recover and update an old iPod touch, "unknown error" occurs and nothing happens. I have followed all the trouble shooting suggestions but nothing works. Ideas?

Hi msclaude,
Welcome to the Support Communities! I'm not sure from your post what steps you have tried, but it sounds like you may need to use recovery mode to address the issue with your unresponsive iPod touch.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT201263
If you can't update or restore your iPhone, iPad, or iPod touch
You can put your iOS device into recovery mode, then restore it using iTunes.
Use recovery mode
You might need to use recovery mode to restore your device in these cases:
iTunes doesn't recognize your device or says it's in recovery mode.
You see the Apple logo onscreen for several minutes with no progress bar.
You see the Connect to iTunes screen.
Learn what to do if you see the progress bar onscreen for several minutes.
To put your device into recovery mode, follow these steps:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes.
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
When you see this screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
Use iTunes to restore your device. Restoring in recovery mode will erase your device. If you previously synced with iTunes or iCloud, you might be able to restore from your backup.Get more help
Learn what to do if you don't see your device in iTunes for OS X, or in iTunes for Windows.
If you put your device into recovery mode by mistake, restart it. Or you can wait 15 minutes and your device will exit recovery mode by itself.
I hope this information helps ....
- Judy

AirPort Extreme extends my network and has worked well for three months. Now it can no longer extend the network and flashes Amber. I have restored to factory settings moved it closer to time capsule and rebooted the system without luck

i have a blinking Amber on my extreme now and it cannot extend the network. It was working fine and nothing has changed. I have restored to factory settings moved it to another room and rebooted the system without luck. Any suggestions

What OS are you running?
Please give me a screenshot of the current AE setup..
I strongly recommend if you have issues.. take control of all the variables. Apple routers have too much auto..
Here is a list that I use for setups when using Yosemite.. but it relates to any OS.
You will need to factory reset again to get going.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite or whatever you are using.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 for basestation.
Use AE24ghz and AE5ghz for wireless on each band, with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for router but if the AE is bridged you can have trouble.. Try using the static IP method or control it via the main router dhcp reservations.
4. Check your share name on the computer/s is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Set up the extend to the Express using 2.4ghz and then see how good or bad the connection is.. this is better in the old v5 utility but if you hover your mouse over where it shows connection an extra chunk of info comes up.
I have specifically used 5ghz to make the extend.. because by testing it works better.. but do not be fooled.. this good connection is poor.. the RSSI.. which is difference signal .. at -79dbm is down the bottom of the stable.. and it drops out on a daily basis.. you want to see that signal around -60dbm at min.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.

HT4113 I have followed all directions about restarting my ipod after it has locked, but they have not worked. What can I do to fix the Ipod?

I have followed all directions from the website to unlock my ipod when it states Ipod is disabled, but they have not worked. Is there anything else I can do to unlock the Ipod?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

My screen freezes after a few seconds on my iphone 5c and the display fades slightly so you can see faint lines in the background. I'm not sure whether this is easily fixable or a major problem. Have reset the device, but this has worked. Any ideas?

My screen freezes after a few seconds on my iphone 5c and the display fades slightly so you can see faint lines in the background. I'm not sure whether this is easily fixable or a major problem. Have reset the device, but this has worked. Any ideas?

To make sure that this is not software related, set it up as new device, explained in this article:
How to erase your iOS device and then set it up as a new device or restore it from backups

Firefox unable to connect after brand new first time installation, IE can load fine, I have followed all directions for firefox can not connect but other programs can, and it did not solve the problem

I have downloaded Firefox for the First time, Firefox can not connect to any website (Unable to COnnect), but IE can. I have followed all the directions on the page for firefox can not load when other programs can (Firefox connection settings,IPv6,DNS Prefetching, firewall settings)
== This happened ==
Every time Firefox opened
== I downloaded it for the 1st time ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MSN Optimized;US)

http://support.mozilla.com/en-US/kb/Firewalls
http://support.mozilla.com/en-US/kb/Cannot+connect+after+upgrading+Firefox
http://support.mozilla.com/en-US/kb/Error+loading+web+sites
http://kb.mozillazine.org/Error_loading_websites

Error 4310 STILL a major problem, why? What is the fix? This is YEARS old problem.. Fix it Apple

Do a site search for 4310, page after page after page of the problem and no real fix that I was able to find. Not only with Window 8 or 8.1 but with earlier versions as well, multiple brands of PC's and burners.. I have Asus G75VW, latest updates for 64 bit Windows 8.1 (same problem when running 8.0), just did a reinstall of windows, newest version of itunes, able to burn CD's using Nero, imageburn, Media Player, Roxio; BUT NOT FROM ITUNES..

You can change this if you don't mind peeking under the covers into Firefox's about:config preferences editor.
(1) In a new tab, type or paste about:config in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste newtab and pause while the list is filtered
(3) Double-click the browser.newtab.url preference and enter the desired value:
(i) Page thumbnails (default)
browser.newtab.url = about:newtab
(ii) Blank tab
browser.newtab.url = about:blank
(iii) Built-in Firefox home page
browser.newtab.url = about:home
(iv) Any other page
browser.newtab.url = full URL to the page
Press Ctrl+t to open a new tab and verify that it worked. Fixed?

I am having trouble with iTunes (possible Quartz Composer Visualizer problem) but have no idea how to fix it.

I tried to use my iTunes but the icon didn't show up and instead I get a folder. The folder is titled TunesApp and in it is another folder called Contents. Contents contains: _CodeSignature, Frameworks, Info.plist, MacOS, PkgInfo, Resources, and version.plist. In the folder MacOS is my iTunes and I can use it, but I get this message:
Last login: Sun Feb 24 13:13:15 on ttys000
unknown705681bcc901:~ kathrynbarber$ /TunesApp/Contents/MacOS/iTunes ; exit;
2013-02-24 13:13:20.988 The plugin 'Quartz Composer Visualizer' failed to load because it has the wrong CPU architecture for this version of iTunes. (3585)
Version from driver for Certificates 1
I can only use my iTunes as long as I keep the message open. When I close the message it tells me: "Closing this window will terminate the running processes: login, bash, iTunes." I have no idea what is going on with it as it was working not too long ago. I do not think I updated it recently but I could be wrong. Any help would be much appreciated.
Thank you!

Sounds like your computer is having additional issues. I suggest taking it to your nearest Apple Store.

HT201272 After my upgrade to ios6 I lost all my purchased books. I have tried to retrieve without luck. I have followed ever tip including the one above. I do not have a purchased books line. I need help. I should have never upgraded.

I cannot locate my purchased books after upgrade. I have tried every forum response with no luck. I go to itunes and the want me to pay for the books again.
Any help would be appreciated.

The ibooks were bought via the same account as you are currently logged in with and they were bought whilst you were in the same country ? And they don't show on either the Purchased tab in the iBooks app nor the Purchased link on your computer's iTunes, and they aren't in the Books part of your library ? You could also check to see if they are hidden : hiding and unhiding .

I have a B200 error message on my Canon MP560. I tried taking out the ink cartriges etc. to no avail

I have a B200 error message on my Canon MP560. I followed the posting that said to take the ink cartriges out, lift the grey bar and remove the printer board. I did that, replaced it after a few minutes, replaced the cartriges, turned the printer off and unplugged it. After waiting well over 10 minutes, I plugged it back in and when it was turned it on, the same message came up.
Now what?
Thanks,
Jimmoclips

I'm glad I was able to help. I kind of wish mine hadn't worked because I ended up being one of the "lucky" individuals where my phone didn't restore from the backup and I lost all of my contacts, calendar appts, notes, etc. It took me an extra 2 hrs last night to rebuild the next month worth of appts and try to rebuild my contact list from my yahoo contacts. Oh well. I will be getting an android at my next upgrade. I'm tired of all of the BS that comes with owning an iPhone.

Canon MX870 B200 error, how to use scan only?

I have Canon MX870 which I only use it for scan. When I'm turning the printer on at the booting process it give me B200 error and STOP to work completely.I have to open and close cartridge door couple times at the startup to can skip the B200 error and be able to use the scanner.I know the problem is related to cartridge or printhead or something about printing. I only use this machine for scanning and i don't need to print at all. How I can disable or disconnect the printing component on this machine to be able to use just the scanner?
or at least disable the printer diagnostic at the start up?

Hi g6381646, We do not have instructions for disabling the printer diagnostic at startup or disconnecting the printing component of the printer; the printer will require servicing to resolve the error. Please call or email us using one of the methods on the Contact Us page to obtain your servicing options.

I get a assertion error when trying to up load adobe lightroom have followed the instruction on the adobe site to fix the problem

i get a assertion error when trying to up load ,lightroom have follow the instructions on the adobe site and it still does not work
and ideas on how to fix the problem
tk
bigguy1965

Hi,
Can you Please provide Configuration of your XP, Win7 Machine [How to post a screenshot in the forum]?
To check if Windows 7 Service Pack is already installed, follow the below steps:
Click the Start button , right-click Computer, and then click Properties.
The basic information about your computer page will open.
To check if Windows XP Service Pack is already installed, follow the below steps:
Click the Start button , right-click Computer, and then click Properties.
Click System and Service Pack Information will be listed
Please also attach log [Where do I find the Flash Player installation log on Windows?], [How to share a document] and Share the Current Version of Flash Player goto - [https://helpx.adobe.com/flash-player.html] and click on Check Now button, using about method can you place the screenshot.
Meanwhile you can also try cleaning Application Temporary Data and Try again. [c:/users/username/appdata/local/temp folder - Microsoft Community], Due to some reason the Installer file is getting corrupted which might be blocking Flash Player Installation. After cleanup try using the offline Installer [Installation problems | Flash Player | Windows]
Thanks
Piyush

It's possbile to upgraded from win2003 x64 sp2 which installed SCOM 2007 R2 into windows 2008 R2 directly?

current OS: windows 2003 R2 x64 SP2
current SCOM version: SCOM 2007 R2
current database version: SQL Server 2005
it's possbile to upgraded from win2003 which installed SCOM 2007 R2 into windows 2008 R2 directly without reconfiguartion SCOM?

Hi,
And as far as I know, in-place operating system upgrade could work, but there is no document about this. Please take backup before doing upgrade.
If you want to in place upgrade the OS, we can simply move SCOM databases to new servers and rebuild management servers one at a time. the downtime for SCOM would be very minimum if the management group has the capacity for agents to report to failover
management servers while the primary MS is getting rebuilt. You do not have to perform in place upgrade on the OS to keep SCOM.
Based on your need, I would like to suggest you add a Windows 2008 R2 as additional management server for your management group. And if possible, please also upgrade your SQL 2005 to SQL 2008.
Here is a thread for your reference:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/4713e303-76a7-4954-9494-55565757d65e/scom-server-os-and-sql-upgrade-from-2003-to-2008-r2
Regards, Yan Li
Dear Yan, Since rebuild/config SCOM Server is very complicated so it's better that I can just upgraded OS into windows 2008 R2 without do anything else.

How to find out Which LineItem is having the wrong data

Hi All,
This is Idoc--File scenario
Iam sending the Idoc from R/3 and it may have several Line items and related data.
If One line item data is wrong also the Idoc will be errored Out in MONI,for this i used UDF in mapping to through the Exceptions. So i have to goto WE05 in R/3 and i have to check each and every line item for wrong data and then i will repost it.
the thing is how can i find out the Particular line item is caused for this Error.
REgards

Hi Sarvesh,
No, in MONI it will not take us to the correct Lineitem which is having the wrong data.
That is only the problem here.
Any Views.........
Regards

Can i get help on how I can successfully install the new google voice video chat software. I keep having an install error. My google voice phone always worked until a week ago when suddenly google would not let me call out from any browser

Can i get help on how I can successfully install the new google voice video chat software. I keep having an install error. My google voice phone always worked until a week ago when suddenly google would not let me call out from any browser until I installed their new google voice and video chat (made by vidyo) software. I was told by genius bar to install Yosemite, which I did. But that did not solve the problem. I removed macKeeper, as well, since a techie friend told me that could be the cause. Nothing so far has worked. When the problem first happened, it seemed to only happen in Chrome. Google voice calling out worked fine in safari, for about a day or so. Now I cannot call out from any browser. I can, however receive calls, and make calls within the video hangout.
I can be contacted directly if questions at gary at couplewise dot followed by the usual extensin

You can only suspend service for 3 months at a time (with or without payment) and only twice a year.

I am having the B200 error which is a major problem. I have followed the directions without luck.

Similar Messages

Maybe you are looking for