I am having trouble burning discs! HELP!

Ok I was able to burn playlists to discs about a month ago. Now yesterday I was trying to burn a playlist to a disc and i got an unknown error (4000). What do I do so that I can burn playlists to a disc again!
4th generation Windows XP

Unfortunately there doesn't seem to be an easy answer to this error 4000, and "upgrading" to iTunes 4.9 when we are currently at version 6.01.(3) is a retrograde step.
If you go to the Importing and Burning section of the iTunes for Windows forum and type "error 4000" in the search field, you are going to see a lot of posts about this.
Check some of them out, and you may find some useful info.

Similar Messages

Having trouble burning discs, sometimes error 4280 comes up, anyone know?

Having trouble burning discs, sometimes error 4280 comes up, anyone know?
sometimes it will say checking media, then it will do nothing!

Look around for more posts about this. There are TONS. I'm guessing you have upgraded to the newest Itunes. Which apparently makes you CD burning fail! Itunes needs to fix this problem but so far they haven't. I think there are little things that you can do to maybe fix it but I'm not sure so look around for other posts about this same kind of thing, anything along the lines of CD's not burning and error 4280. I wasted 5 CD's trying to get past this error thinking it was my CD's fault.

I am having trouble burning a gapless album that is a mixed compilation. I have selected part of compilation album on the options tab and I did select gap between songs as zero. When I play the cd, it is sticking between songs? Please help!

I am having trouble burning a gapless album that is a mixed compilation. I have selected part of compilation album on the options tab and I did select gap between songs as zero. When I play the cd back after burning, it is sticking between songs? Please help!

sheldz46 wrote:
Thanks Chris but according to Pioneer, is was possible with the itunes in 2010.
It wasn't. (at least as far as setting Part of Gapless album goes. See next para.)
They claim that itunes will work if you select gapless album, part of a compilation
Selecting Gapless album does not make it gapless. (which is likely that now this option is removed - to not confuse people)
The ONLY thing that option did was tell iTunes to NOT crossfade consecutive songs from same gapless album IF you had crossfade enabled.
-> http://support.apple.com/kb/ht1797
Setting the gap to 0 is what made it "seem" gapless.
Perhaps it is not working as it used to.
Try a slower burn speed.
and used itunes to convert them to mp3
Dont know why they suggest this.
Simply use the WAV file. Then there will be no loss (as there is when converted to MP3).

HT1349 having trouble burning cd that i purchased from your store please help ?

having trouble burning cd that i purchased from your store, can you please help?

Go to I tunes store page, look to the far right and click on purchased.

Hello I am having trouble burning cds keep getting error mes. 4450 ? Help!

Hello, I am having trouble burning CDs from itunes keep getting error message 4450? Help

The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I have been having trouble burning a DVD.

I have been having trouble burning a DVD. It goes through all the steps until it gets to the multiplexing "burn" step and then with 3 minutes left the disk pops out. The disk is left empty and an error comes up. I have been able to burn DVD's before, so this is frustrating.

Well - not correct answer as I understands it - This is a very complex question. In my case I'de put a button just touching the TV-Safe area boarder. Moving it a minute inside and the Error disappeared.
BUT - there are so many other things that I collected a long long list on this - read and see if You find help here.
Multiplexing Error
PART One.
Use of strange video/audio material eg .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio = .aiff (as on audio-CDs) (else coverted to this .aff 48KHz)
Chapters !
A. Using strange letters in video project name eg +,/; etc. keep to a-z and 0-9 strange letters in project name eg +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly eg x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutly needed.
eg external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing widescreen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taio Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the uneditited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
*One user more writes*
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous trys, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no mulitplex error
As a final experiment, I moved "bad" chapter mark about 5-10 secs beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplexer Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Yours Bengt W

HT1338 I'm having trouble burning my photos from i photo what should i do

im having trouble burning my photis it tells me there is an errors in the writing

There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.

I am having trouble burning a disk of my project what should I do?

I am having trouble burning a disk of my project what should I do?

Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere Elements and disc burning
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html
Set your DVD output to a folder on your hard drive and then use the FREE Imgburn to write the folder to DVD (send the author a PayPal donation if you like his program)
Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any toolbar add-ons

Having trouble burning images to cd, get error code 0x8002006E - what is it?

Hello all, I am having trouble burning images to a cd, I get error code 0x8002006E - what is it? I have an older MacBook Pro, OSX 10.6.8. Help!

You might also try SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
And you might try deleting the "com.apple.finder.plist" in your Library.
Ciao.

I have an '09 15" mac book pro running os x mavericks and I'm having trouble burning a dvd.

I have an '09 15" mac book pro running os x mavericks and I'm having trouble burning a dvd. In iMovie, I sent my movie to file and then to iDVD to burn a copy. It was saved in Documents. When I went to iDVD, the thumbnail image of the movie to be burned was faded and inoperable. What's going on now?

Did you export the movie out of iMovie as 480p? Next just drag the movie from the Documents folder into the iDVD menu window being careful to avoid any drop zones.
Lastly follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Having trouble opening flash help/f1 in cs6

This is so stupid I can't get any help I need from any one I don't know what I am even doing here. I have tried to contact adobe but all they want you to do is join or become a member of their boards and that is it. I am having trouble opening flash help on cs6 and no one can help me do it. I have join all that adobe wants me to join I have done and paid out all that adobe has requested why can't I get help when I need it with their products?

sound like you try to opne flashMX2004 or flash8 foles in MX.
that wount work. An upgrade would help, or asking your source for
those flas to save then in MX format - which is not possible in
Flash 8 though.

Having trouble with disc space on my 120G mac air. I back up to a separate my passport for mac disc, but my mac is also holding 40G worth of back up when i check what is using space. Why is this?

Having trouble with disc space on my 120G mac air. I back up to a separate " my passport for mac" disc , but my mac is also holding approx 40G of back ups as well when ive checked what is using space. Why is this?
Ive started running iphoto from the separate passport to save space,
and put all my music into the itunes match to save space as well
but it is still saying it is almost full because of the back ups!
I should of bought a bigger mac, but i need to make do at the moment, but it is hard when it constantly has only 10G or less space left.

When you use TimeMachine to back up a Mac notebook the local backups feature is automatically enabled. The local backup is just like a TimeMachine backup but it is done to the internal drive rather than an external. The important thing about local backups is that the feature is smart - as you need more drive space for your own data and applications, TimeMachine automatically culls the local backup to give you that needed space. So yes, it will look like you have very little drive space left and that the backup is 'robbing' you of needed GBs. But it really isn't.

I am having trouble burning CD's and DVD's. Get the following message: error code 0x8002006E. Can any body help ?

I am having problems burning CD's and DVD's all of a sudden.
I get the following message: error code 0x8002006E. I have followed all the intsrucciones
on Helps On Line from opening spece on my start up disc to allow burning thrue to disc repair with disc utility
and the problem still persists. Can anybody help ?
isanunez

Are using the standard OSX Finder or do you have another finder application like Totalfinder?
Long discussion of this error here:-
https://discussions.apple.com/thread/1422026?start=0&tstart=0
There might be something there to help
Jerry

I have a new MacBook and I'm having trouble with the help section. I would like to rearrange the order of my photos with in an Event, how do I do this? I follow the directions but it will not work. Thanks for some tips.

I have a new MacBook Pro and I'm having trouble with some of the Help sections. I want to rearrange the order of my photo's within an Event. I have followed the directions but it will not let me do it, what am I missing? Thanks for any tips.

Are you talking about iPhoto? If you are please post this in the iPhoto forum, thanks!

I'm having problems burning discs,whether it is photos or music i keep getting error messages,i have been using the same brand for years and have faith in them and this problem has only started since I got a new hard drive installed,any thoughts ? thanks

at the moment i have had a disc in for at least 20 mins and it's still 'finishing' sems a bit long for 17 songs . also the fan is on almost all of the time , maybe that has a bearing .. ? I'd appreciate some help here as it is getting increasingly frustrating . alao when i put in the discs that i have used they do not register on the desktop . so i have been wasting lots of discs doing this .
Thank you all .

What brand of media are you using?
What error messages are you getting?
What application/s are you using to burn?
iDVD: Troubleshooting issues with burning discs
http://support.apple.com/kb/HT1583
Mac OS X: "Unknown Error -2147352480" when burning CD-R, CD-RW, or DVD-R media
http://support.apple.com/kb/HT2718

I am having trouble burning discs! HELP!

Similar Messages

Maybe you are looking for