I am having trouble connecting IPAD1 to wireless any suggestions?

I am having trouble connecting my IPad1 to Belkin Wireless Router. It was working fine until a couple of days ago. I can use my IMAC okay via wireless. I can see my network on the IPad, but message comes up "unable to join the network XXXX". I have read the Apple recent release to fix this problem...still no luck. Can anyone please help?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Similar Messages

I am having trouble connecting to my wireless internet. I keep getting message that my network configuration settings have changed. Ive been advised that i need to change settings to look for dynamic ip address ?

I am having trouble connecting to my wireless internet and am getting the message that my network configuration settings have changed. I have reported it to my provider who advised that they think the Mac is looking for a fixed IP address and they use dynamic addresses. I have had the Mac for months and have not had this problem before. I would appreciate any help please on how to fix this ?

Then I get a separate pop up that says: Secure Connection Failed. aus3.mozilla:443 uses an invalid security certificate.
The certificate is only valid for the following names: securelogin.arubanetworks.com, www.securelogin.arubanetworks.com
(Error code: ssl_error_cert_domain)
This could be a problem with the server's configuration or it could be someone trying to impersonate the server.
If you have connected to this server successfully in the past the error may be temporary and you can try again later.
I have tried many many times!

Having trouble creating a comp card, any suggestions?

Having trouble creating a comp card, any suggestions?

What trouble are you having? We need details, or we can't be of any help.
This question is kind of like calling a mechanic on the phone and saying "I'm having some trouble with my car; any suggestions?"

My computer is having trouble discovering my Bluetooth keyboard, any suggestions?

My I Mac is having trouble discovering my Bluetooth keyboard, any suggestions?

Something here should help http://support.apple.com/kb/TS3048

Hafter wiping it clean. She is having difficulty connecting to wifi. Any suggestions?

I gave my iPad to my daughter when I got the iPad Air. I wiped it clean before sending it to her. She is having difficulty connecting to wifi. Any suggestions?

Hi Nldplane,
If your daughter is having issues with the WiFi connection on her iPad, you may find the following article helpful:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Regards,
- Brenden

MacBook 10.6.7. is having trouble connecting to my wireless network.

Hi all~
I am basically having trouble with my wireless connection. I know I have a functioning connection because my girlfriend is able to connect and surf just fine. However, I try to log on and get the usual error messages. I've tried the network diagnostic and the setup assistant to no avail. They tell me to contact my ISP, but my ISP can't find a problem. Any advice out there? Has my airport gone crazy....is this a hardware issue??

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

3510 all in one having trouble connecting to new wireless network

Ok - just to update, at least the drivers are downloadable now ... I'll see if that resolves my issue.

Hi guys. I just switched to a new modem through my ISP (Rogers) that has a built in router and a much faster connection. (Previously, this 3510 printer was working just fine over my network with a modem and a router that was separate.) My computer is hooked into the internet via a direct cable and everyone else in the household connects via wireless, which has been set up and works well. For some reason though, my 3510 refuses to play nice with the modem and connect to the network. I've tried plugging it in via usb cable, then going into the settings and clicking on the "convert a usb connected printer to wireless" option. I hit "yes, access the computer or router", then next, it finds my wireless network with no trouble and I type in the required password and "next" - it then takes a while to go through it's "setting up printer on network" .... and then after a while, I get a "MAC address filtering may be enabled on your wireless router" error. There IS no MAC filtering. I have "allow all" set on the router. This shouldn't be an issue. Has anyone else had this problem? Is it just a thing with the newer modem/router combos and these older HP printers? I tried to update the driver, but your website doesn't seem to be letting folks do that at the moment (some error you're fixing, it says?). If you have any suggestions on how I could get past this problem, I'd really appreciate it. It's driving me NUTS. Thanks! All the best, -- Jodi

Having trouble connecting to my wireless network

Hi everyone, my iPad gen 3 can not connect to my wireless network. I have to unplug my router, and repower for it to connect. Even going into settings on the iPad, and putting in the password for the wireless connection, the iPad gives me an error message that the password is incorrect. I was thinking of updating to a new router. My current router is about 3 years old. I am also running Network Magic from Cisco. Can anyone give me any ideas for a solution to this problem? As always, thank you for your help.
Regards, Paul

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I'm having trouble updating my apps. Any suggestions?

I'm having trouble updating my apps on my iPhone. Any suggestions?

When I go to updates, there is an arrow > next to the app. When I try to "highlight" the >, nothing happens.

Having trouble connecting Macbook to wireless FIOS

I tried looking online and can't seem to find an answer that will fit my situation. I don't have a Pro. We recently got FIOS installed and have the Actiontech router. I am able to connect other devices and computers to the wireless signal, but can't get my mac to work correctly. It will recognize the router signal and say it is connected, but I can't get it to bring up the internet once it is connected. Any help would be appreciated.

volboy23 wrote:
I went in and changed the password to WPA as that is better and there were several people saying that should help it, of course after I posted this earlier today. It still doesn't seem to want to work. Any thoughts?
yeah, Mac computers like WPA much better. So if your router is set with WPA and your still having an issue. Then it must be something else.
Do you have other Wireless devices that work? If so, then it is something on the computer itself.
If not, then try removing the wireless security (turn the wep/wpa off) and see if you can connect that way. If so, then it has something to do with the security on the wireless.
If still having issues at this point, and you have no other wireless, then I would suspect the router. (try rebooting and resetting the router, always a good idea to try this) Then if still havng an issue, I'd see if I couldnt get Verizon to replace the router.
====================================================================================
Error exists between keyboard and chair.

Having Trouble Connecting to new wireless router...

My family just purchased a wireless router. It is a D-Link. Previous to this, I had always used an ethernet cord to get online as I am right now. The router is all set up and I was using the wireless end of it for awhile with no problem until my dad secured it and added a password. I wrote down this password and have been trying to reaccess the wireless internet and it just keeps telling me that the password is incorrect when I know its not because I'm sitting here looking at it on our dells computer screen.
I didn't know if there was something that I needed to do to my macbook that i havent since I have always used an ethernet cable...but I don't know what that would be since I have been to other individuals houses and linked up to their wireless glitch free. The router came with a cd. I opened this cd on my macbook, and the contents of it weren't even compatable with my mac, other than the manual which was not helpful either.
This router is SUSPOSE to be for Mac users, and it worked before the password was set so I am just at a loss.
Any help would be greatly appreciated.
Message was edited by: jacquienicole11

Hi Jacquie,
First: are you sure you've selected the right security protocol when OS X asks you for the network password? There's a dropdown menu with options such as "WEP, WPA," etc. You'll need to select the right one for your network. If you pick the wrong one and enter the password correctly, you will still get a "bad password" error.
Second: Are you sure your router is not MAC-locked? This has nothing to do with Macintosh computers. a MAC address is something every wireless card in every PC has. It's a unique address that is assigned to your computer. If your router is MAC-locked, that means it's set to ONLY allow certain addresses to connect. You'll need to disable the MAC-lock or enter your MAC-address into the "approved" list in the router's settings page.
Third: The problem is NOT your Mac. As you said, it's worked just fine on other wireless networks. The problem lies absolutely, completely, without question in the router settings. Try the two things above and see if that solves it. If not, come back and we'll keep going.

I'm having trouble connecting to my wireless network/router

I see my network but when I try to connect automatically is gives me a timeout message.

kimdpb wrote:
Wireless is working for all the other devices
Using a Cisco router with Network Magic Interface....it doesn't see the Mac Book but the Mac sees the network.
Can you see the network in the Mac's wireless network list?

TS4268 I am having trouble sending in iMessage. Any suggestions? I had it working just a little bit ago.

I can't seem to send an iMessage. I had it working just a little bit ago, but now it won't work.

Is your wifi connected and working?
Are you trying to message another Apple device?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

HT5313 I am running v10.7.4 and am having trouble installing v10.7.5, any suggestions?

Software update downloads fine, after a while of installing, a message appears stating the update cannot be saved... any ideas?

HI, i had this exact same thing.
I then noticed my date/time was no set so set that to automatic.
I also signed into my itunes and verified the computer.
I tried a download update and it worked! don't know which made the difference, don't care!
I had tried just one update as it takes so long to download them all.
will try the rest now

Having trouble installing creative cloud. Any suggestions?

It keeps giving me an error code 202. Saying that something is wrong with the download files. Not sure what to do. Please help!

Hi Mcope003,
Make sure you're installing to the default location as kglad suggests, delete the contents of the temp directory for your user account, or try installing again from a newly created admin user.
Hope that helps,
- Dave

I am having trouble connecting IPAD1 to wireless any suggestions?

Similar Messages

Maybe you are looking for