I am having trouble connecting to internet with my iphone 5,  Are there any issues with with iphone 5 that would cause this problem?

I am having trouble connecting to internet with my iphone 5,  Are there any issues with with iphone 5 that would cause this problem?

Perhaps something in Apple's support article on troubleshooting problems with WiFi connections will help:
http://support.apple.com/kb/TS1398
Regards.

Similar Messages

  • HT5244 Are there any signs i should look for that would indicate my system is infected with the new java virus?

    Just to keep an eye out.

    WZZZ wrote:
    I ran it just to see, even though I know I'm clean. I agree with T. Reed's comment that it may not be for the novice user who doesn't know what belongs where.
    Which is why they should just press "enter" when in doubt.
    I know this isn't your full time job, but perhaps you might want to write another alternate script
    Apple says it is going to write one.
    Another thing. When it was busy scanning Applications -- I know it says "this may take some time," I gave up and hit skip after giving it a very long time to finish.
    Thanks. Don't mean to be ungratefu for your good work on this.
    There is no way to tell how long that will take. If I had to edit that script, I would just remove that part. I was following advice that was not accurate in the ensuing blog frenzy. That was costly. I didn't have much time, so should I have gone ahead and scan system areas or done a better job with LaunchAgents? I made the wrong choice.
    I always welcome suggestions. Unfortunately, comments on User Tips seem to be locked down pretty tight.
    It is a moot point now that Apple is going to write a script. When that happens, I will take down that script. Until then, I'm just reminding people to press "enter" when in doubt.

  • HT3887 Having trouble connecting blutooth on my laptop. Devices are paired but it says "not connected". I've gone thru System Pref. with no luck. Can anyone give me step by step help to reconnect BLUETOOTH? plz, ty

    Having trouble connecting blutooth on my laptop. Devices are paired but it says "not connected". I've gone thru System Pref. with no luck. Can anyone give me step by step help to reconnect BLUETOOTH? plz, ty

    Hi:
    There are no dumb questions...answers, yes, but not questions.   Sometime I use acronyms and forget that I should explain things a bit more. 
    Resetting those two things sometimes helps and cannot hurt.
    SMC=system management controller:
    http://support.apple.com/kb/HT3964
    PRAM=parameter random-access memory:
    http://support.apple.com/kb/PH4405
    If that does not help, delete the phone from your computer (system preferences>Bluetooth), restart, and then add it back in:
    http://support.apple.com/kb/PH3660
    Barry
    P.S.  If everything fails and you are near an Apple store, make an appointment with a "genius" and take the devices in for them to assist.

  • We recently switched ISPs. To connect to the new ISP our Airport Extreme has to be in bridge mode. Now our Nintendo Wii won't connect to the Airport. Is it an issue with bridge mode that is causing this?

    We recently switched ISPs. To connect to the new ISP our Airport Extreme has to be in bridge mode. Now our Nintendo Wii won't connect to the Airport. Is it an issue with bridge mode that is causing this? We're running two Macs wirelessly with no problems.  And the Wii did connect before the switch.

    Hello and thanks for the reply.  I gave this a try, turned off Airport on one of the computers and tried the Wii again.  Still no connection.  I should say that we're also running an old G4 (wired) off the Airport as well, with no problems.  I've tried many things to make the Wii to work, including power cycling the Airport, turning off the security settings in the Airport, resetting the Airport to it's default and redoing the network, resetting the network setting on the Wii (several times), moved the Airport closer to the Wii, all with no luck.  The Wii "sees" the Airport but won't connect to it.  I'm at a loss for anything else to try, so any help is appreciated.

  • Hi. I have an ipod 7th Gen. Whenever i rate a song from ipod, when i connect my ipod to my pc i see that  another different song is rated on itunes. Can you help me with it? or what causes this problem?

    Hi. I have an ipod 7th Gen. Whenever i rate a song from ipod, when i connect my ipod to my pc i see that  another different song is rated on itunes. Can you help me with it? or what causes this problem?

    Hi Becki ..
    You need to "authorize" the Mac.
    Launch iTunes on the Mac then from the iTunes menu bar top of your screen click Store > Authorize This Computer.
    Now, using the same Apple ID as you used to purchased iTunes media originally, you should be able to sync all your content.
    More details here >  iOS: Syncing with iTunes

  • Are there any other templates available besides those that come with numbers?

    Are there any other templates available besides those that come with Numbers?

    Hi David,
    If you have Numbers '09 there is a Checking Register template that might suit.
    Numbers can open Excel templates and documents. Do a web search for checking register spreadsheet.
    Regards,
    Ian.

  • Are there any issues with using OS X Mavericks and Premiere CC?

    Are there any issues with using OS X Mavericks and Premiere CC?

    Official statement: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
    Peter Garaway
    Adobe
    Premiere Pro

  • Is Adobe Connect part of Adobe Creative Cloud? Are there any best practices ideas from people who use Connect and Creative Cloud?

    Is Adobe Connect part of Adobe Creative Cloud? Are there any best practices ideas from people who use Connect and Creative Cloud?
    I have an Adobe Connect account and I'm are also in the early stages of developing a webinar. I am looking for any tips and advice from anyone who uses both of these services.

    As the £27, was an introductory offer. Upon the completion of one year, the price will change to the normal creative cloud cost which is at £46.88. However if you have the previous versions of the creative suites like CS 3, 4, 5, 5.5 or the CS 6. You can avail the offer at £27.34 per month incl. VAT. However this Requires annual commitment; billed monthly.

  • I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD.  Are there any apple protocols or other settings that need to be enabled on WCS?  No firewall involved.

    I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD.  Are there any apple protocols or other settings that need to be enabled on WCS?  There is no firewall inbetween the two connections, as this is all on our internal network. 
    Both devices can connect to the network, but when they try to talk to each other they can't make the connection.
    Thanks.

    If anyone ever comes across this and has the same issue, here's what I did to fix it:
    My Linksys router has a Network Mode setting, and I had to change it from "Mixed" to "Wireless-G only".  (I would've used N but one of the NICs in my house is too old to support it.)  Anyway, after making this change, Facetime works fine on the phone.  Hope this helps someone else!

  • Are there any issues with Maverick and Canon Pro10 printers

    Are there any issues with Canon Pro10 printers, Dymo 450 LaserWriter and Epson SX400 with the new Maverick?

    Try searching these forums and "Googleing" those devices on the web.....
    Barry

  • Are there any issues with changing IP address of an ACS v5.3 system after initial setup?

    I am migrating from ACS v4.2.1 to v5.3.  I want the final v5.3 system to assume the IP address of the original 4.2 machine so I don't have to change any configs on the network devices.
    Are there any issues with changing the v5.3 system IP address AFTER the initial setup?

    I tried it without a problem. I changed the ip address of the WLC many times.
    You have to make sure though that:
    1-) You change the switchport accordingly to the appropriate vlan if the new ip belongs to a subnet of a different vlan.
    2-) Make sure that all AAA clients configured to use the new IP address of the ACS servers.
    Here is the procedure how to change the ip of the interface (as per cisco doc):
    http://goo.gl/0BYqVT
    I changed also by normal ip address command and it works. but of course the server must be standalone before doing that step (i.e. no secondary ACSs registered to it and it is not registered to other ACSs in a distributoin).
    HTH
    Amjad

  • Are there any issues with itunes where as certain windows looks like a PC in safe mode?

    are there any issues with itunes where as certain windows looks like a PC in safe mode?

    Check your trash. I had some old uninstalled files in there. Deleted and restated itunes. seems to work.

  • Virus??? computer having trouble connecting to internet

    Last week, my son's school computer got a virus, and sent me about 50 copies of the same email message. Since then, things have not been working properly on my macbook. Safari is telling me it can't connect to the internet, even though the network diagnostic tool tells me there is no problem. Mail is having trouble connecting too, and my idisk is suddenly inaccessible. I wanted to restore to a previously saved backup of my personal settings that I have been saving to my idisk but backup said it couldn't connect to the idisk. Backup also gave me a scary message when I had no choice but to abort the "restore".
    I've seen lots of messages here claiming that there are no mac viruses, but if that is the case, what could be going on here? I already rebooted several times, and repaired permissions on the hard drive. any other suggestions???

    Hey, Mort, thanks. I did find clamxav last night on the web and left it running this morning (I'm at work now.) So we'll see what it has or has not found when I get home later. It didn't allow me to just run the software on my whole hard drive, though, I had to choose folders. I chose the system and library. Do you have any other ideas about where the virus (if it is a virus) could be living?
    I'm not sure if my system has been updated. I run "software update" once a week so perhaps it has already happened. I'll check tonight.

  • Trouble Connecting To Internet With Built-In Internet

    Hello everyone!
    My iBook G4 is all of a sudden having trouble connecting to my Sprint DSL through the built-in Ethernet connection; in the Network preferences, there's a red light next to the Built-in Ethernet that warns: "The cable for built-in Ethernet is connected, but your computer does not have an IP address and cannot connect to the Internet."
    When I open the tab for the Ethernet preferences, there's no IP address listed. I try to refresh the DHCP lease, nothing happens. There's an IPv6 address, but that doesn't seem to do anything for me. Restarting the computer and the modem don't help -- and Sprint is stumped and doesn't know what to do. Is there anything I can do to fix this?

    Thanks for the response -- I've tried restarting the Mac and the router multiple times; it doesn't help. Sometimes if the computer is shut down then turned back on (but not restarted), the Ethernet will be able to connect to the internet, until the computer goes to sleep.
    Then, when it wakes up from sleep, the Ethernet's broken again. And for the past two days, no amount of shutting down and restarting is working. It's some kind of software glitch, but I just don't know how to fix it.

  • Having trouble connecting iPod Touch with iTunes 8.2

    I have a first generation iPod Touch 16GB, before the recent 8.2 iTunes update (or it may have been 8.0, I tend to ignore those annoying 'please update now messages')my iTunes worked properly, and the Touch would sync whenever I connected it.
    Now when I connect the iPod to my computer it no longer shows up in iTunes, the computer (running Windows Vista Basic) recognizes the iPod is there, and the iPod charges properly. iTunes itself however is oblivious.
    I've tried completely reinstalling iTunes like the support page suggests, but the problem persists, it is getting quite annoying now since I cannot get the new 3.0 OS update or put new music on.
    Can anybody help?

    I have the same problem, but mine won't even take a charge from the computer, or my docks. I have to plug it into a wall wart usb charger and then it works fine. Can't get my computer to recognize/sync it since the "upgrade" to 8.2. The only responses worth a crap on this topic say to just be patient because it is now a known bug they are working on. IMO I wish Apple would stop acting like MS and stop releasing stuff that hasn't been properly beta tested. This glitch has occurred for thousands of users, and any basic cross platform testing process should have revealed this problem in the first 5 minutes. Yet ANOTHER embarrassing POS from the "new" Apple.

Maybe you are looking for

  • Max Hard Drive size for Ultra 10s

    Hi, I'm kinda new to sun and I have a ultra 10s with a 9 Gig factory installed HD. I was wondering what the maximum sized IDE hard drive that can be installed. I would like to mirror the system as well. I've seen another post about this but the max s

  • New Audio Issues with Apple TV

    As of last week my Apple TV has not been able to play audio on a consistant basis. I have it connected to a Samsung TV which is connected to Sony Soundbar Station. The Apple TV audio plays for 2 seconds but then switches to the Cable Audio. I have ha

  • How to use iMovie plugins?

    I have recently started working with iMovie, and would like to use a special effects plugin to add "magic effects". I followed instructions to add the plugin i downloaded to the Plugin folder for iMovie, but how do i edit with the effects? I have a M

  • After 10.5.7 HDMI connected 24" Monitors only allow 1080p

    After 10.5.7 update my 24" LG L246WH monitors which are connected with HDMI / DVI-D cables to the NVIDIA 8800 GT only allow 1080p and the monitor list doesn't show the 1920x1200 resolution anymore. Now I have to use the DSub connection with VGA cable

  • Generating picture on Applet after fetching it from Database

    Hello, I want to display the picture of employee in my JApplet. The data base which I am using is SQL Server 2000.I will be storing it under image data type in data base. How will I retrive the picture of employee when Employee I.D is selected. Any c