I am having trouble copying and pasting.

Once I have sent a copied item it reappears when I am wanting to select a new copied item. I am mailing on hotmail. Also, it does not always paste/ appear at the other end.

Unless you want the whole screen, why not use the Snipping tool? It's great!
Anyway, regarding the clipboard problem try Edit > Purge> Clipboard before you capture what you want.

Similar Messages

  • Having Trouble Copy and Pasteing Local Variable in LabVIEW 2010

    I am Having Trouble Copy and Pasteing Local Variable in LabVIEW 2010 in s subVI.
    I have a VI that has a Local Variable called "Node Addr". I can select it OK, and it appears to Copy OK, But when I go to paste it, nothing appears. It doesn't matter if I use Cntrl-C Cntrl-V or the Copy and Paste from the Edit menu, I get the same results. I tried many times and got the same results. I made sure that I had click a paste location. I can insert the Local Variable if I use the Data Communication panel.
    On one of the Paste, I got an error in the error list that said that a Local Variable was not connected to anything. When I clicked on the error, it took me to an insible item in the lower right corner of the block diagram that had nothing but a select box around it. I couldn't select the invisible item, but I could delete it.
    Why does the copy and paste of this local variable not work?
    Why does the paste cause the insertion of an invisible item?

    dbaechtel wrote:
     My VI is fairly complicated. In several places in the VI, I am either reading or writing to this variable which is an numeric Indicator on the Front Panel. Using local variables seems to be the best way to handle this situation rather that using wiring all over the VI. Since the VI is mainly a State Machine and there are only 2 Writes to the local variable, I am not afraid of race conditions in this case.  NO!! While you may think that using Locals is your solution to wiring, it is not!  The fact that you are writing and reading, most likely from several places, will most definitely contribute to a race condition.  Depending on your implemetation, you should ALWAYS use wires.  The wires are the variable.  If you are using a loop (While, For), then using shift registers are appropriate means for routing values so that they are used by other sections of the code, later.  One thing you must respect with LabVIEW is the dataflow.  That's where Locals often fail.
    I am not copying the Local Variable from one VI to another.
    I am not copying the Local Variable from one VI to another.
    The Data Communication panel is one of the panels that shows up in the Functions pop up list when editing the Block Diagram. It is the panel that includes the Local Variable function.
    I don't know if the invisible item that was inserted in my block diagram was hidden or not. All I know is that the Errors List said that it was a Local Variable and that it was not connected to anything. I couldn't select it to get more information. All I could do was delete it.
    You did not address my questions about why the Copy and Paste does not work properly for my Local Variable.  Maybe it's a sign from the Software Gods not to use them LOL!..
    So if I understand correctly, you are trying to copy & paste the Local Variable from within the same VI.  How large is your block diagram?  Did you try right-click on the variable and select "Find > Local Variables"?  If it's a block diagram larger than 1 single screen (which it shouldn't), then it is possible that the Local is hiding beyond the screen.  You should find it as I described earlier.
    See my comments in red above.

  • 5.0.2 I'm having trouble copying and pasting blocks of 10+ clips so that...

    I have 10+ overlapping clips which, when I try to copy and paste to reuse later in the movie don't paste in the same order or even in the same general spot in the movie. Basically, I have to first go searching for the pasted pieces and then try to put them together all over again. It seems like there must be an easier way.
    This is for a music video and i'm working ONLY with audio (all video has been deleted), which, as i said is very much overlapping.

    Your only choice at this point is to use a machine running 10.3.9 at the latest.
    Even the you will need to resort the audio.
    W1

  • Having problems copying and pasting

    Just upgraded to 10.9.3 - having trouble copying and pasting. Hard to highlight text.

    Thank you for responding. I am copying content officially from travel destination out hotel websites and pasting descriptive copy into Word 2007 to write a Press release. If in a, Press release there are links I need to research to make sure they are correct, copying and pasting the url from word to firefox doesn't work. I have to copy and paste into wordpad and then copy to word. huge pain. thanks for the help

  • I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found

    I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found this?

    You need to give a lot more information about the media specifications and the project properties you're using in the different projects.

  • It's currently taking me ages to send multiple emails as I'm having to copy and paste the email each time. Does anyone know if there is a way that I can send the same email several times but that can be addressed (Dear....) to different people?

    It's currently taking me ages to send multiple emails as I'm having to copy and paste the email each time. Does anyone know if there is a way that I can send the same email several times but that can be addressed (Dear....) to different people?

    Oh at least just duplicate the same email several times so all I will be maunally inserting each time will be the address/name??? Please help!!!

  • How do you email contents of favorites folder without having to copy and paste each item in the folder individually?

    how do you email contents of favorites folder without having to copy and paste each item in the folder individually?

    Zip (compress) the folder before you send it.

  • Looking for an app that I can save what I highlight when I am reading an article without having to copy and paste

    Looking for an app that I can save what I highlight when I am reading an article without having to copy and paste

    I looked at Bento and at first glance I think it would do everything I want it to do, then I saw a review or something from a customer that indicated the information in Bento could not be exported (say to send out a mailing).  I may want a program that can do that as well, is there one out there? If not it does look like Bento will work.  When you save a picture to a customer in Bento can you open it up full size?

  • Having problems copying and pasting in Photoshop CS5

    Hi,
    I'm running Photoshop CS5 on my laptop (Win 7) and desktop (Win 8).
    When I have three documents open and open a New one, I can't get the others to copy and paste by keys or menus...not even by dragging to the new document.
    Same thing happens in both version of Windows. The images are all jpgs, RGB, 8 bit.
    Also, sometimes when I create a New doc, one of the other images suddenly disappear.
    Any ideas what's going on here?
    Thanks in advance for any advice you can offer.
    Biff

    You probably simply crash your graphics acceleration by exhausting all resources. Turn off openGL in the prefs and/or update your graphics driver.
    Mylenium

  • Trouble Copying and pasting a movie clip from another flash scene

    Hello,
    I have been trying to copy a movie clip from the library of one flash and paste it into the library of another.  But when I do this, it always gives me, "One or more library items already exist in the document.
    I have tried finding and renaming those items, renaming the existing movie clip, and even changing it into a graphic instead.  Still it always replaces these certain movie clips in my main flash file.
    I even tried the following:
    Creating a new movie clip in the new file.  Then going into the movie clip of the other file I wish to copy over, and trying to copy its frames and put it into the new movie clip i created in the main file.  Even then, it says I'm replacing library items!
    Can someone help me?
    Thanks

    The easiest way to be sure you are renaming everything is to probably to copy the movieclip into a new empty file's library and then rename each symbol in there.  Unless I am missing something, when you do that, each isolatable symbol inside that movieclip will appear as a separate symbol in the library, making it easier to be sure you have renamed them all.

  • Why am I having trouble cutting and pasting shape animation keyframes?

    Thank you for taking a look at my little problem...
    I am creating a shape animation - a simple box that "dances". I create eight keyframes with control point changes. After the eighth keyframe I want to begin with the first again, by cutting an pasting the keyframes I've already created. When I try to paste one or more keyframes after the eighth keyframe, the pasted keyframe(s) produce unintended results. Point one seems to reset to 0,0 - and the others do not reflect the pasted keyframe either.
    Is there something I am missing about cutting and pasting keyframes in the shape animation parameter?
    Thanks

    Thanks Zoom - This will probably be the solution for me. Unfortunately there is some underlying problem going on. I can't get the "repeat" option by clicking and holding on the keyframe, but I can get it in the right column of the keyframe editor. But when I select repeat it doesn't change anything. I even selected "generate keyframes" - nothing. However, the program did slow down as though I had done something, and the "undo repeat" option was available in the edit menu. So the program thinks it did something. I'll keep poking around...

  • The send link is not working. I get taken to my Outlook inbox where a message is displayed 'navigation to the webpage is cancelled'. Any ideas on how to fix this? It's driving me mad having to copy and paste the link rather than clicking on 'send to'!

    I am using Outlook 2010 and I have set this as default. Furthermore, this does not seem to be recognised by Windows XP as it is not listed in IE8 options, programs drop down list. Very strange. Had no problems previously with Outlook Express.

    I am using Outlook 2010 and I have set this as default. Furthermore, this does not seem to be recognised by Windows XP as it is not listed in IE8 options, programs drop down list. Very strange. Had no problems previously with Outlook Express.

  • Copy and paste tracks precisely

    I'm trying to create a drum beat with my drum set about say, 2 minutes long, and I want to be able to copy and paste so that it is about 10 minutes long or more. Reason being so that I can improvise and play along to the beat for as long as I want. I don't want to have to play the beat by hand for 10 minutes to get a clip that long.
    Problem is I'm having trouble copying and pasting clips so that everything stays in time. I've been able to do this sort of thing with final cut in the past just by copy and pasting clips, and I'm wondering if this would be possible in garageband? Thanks.

    ericward6547 wrote:
    I'm having trouble copying and pasting clips so that everything stays in time.
    every measure needs to start and end EXACTLY on a measure marker
    that said, you're doing this the hard way.
    grab the top right corner of the region and drag right as long as you wish
    or better yet, just turn on the cycle region button and stretch the yellow bar to encompass your segment, it will play forever.

  • COPY AND PASTE FREEZE TRACKS

    Hey all, i usually make 8 or 16 bar loops before i copy and paste------->> out to create a song. i use alot of native instruments on some tracks. i can freeze those tracks for the 8 or 16 bar length, which i like to do because its a shorter time that freezing a track thats 60 bars long. so my question is how can i freeze 8 or 16 bars worth of music then copy and paste out the tracks for say 60 bars or so?

    ericward6547 wrote:
    I'm having trouble copying and pasting clips so that everything stays in time.
    every measure needs to start and end EXACTLY on a measure marker
    that said, you're doing this the hard way.
    grab the top right corner of the region and drag right as long as you wish
    or better yet, just turn on the cycle region button and stretch the yellow bar to encompass your segment, it will play forever.

  • I cannot copy and paste details from my bank statement into a word document, without the formatting changing.I have a message in my Error console which reads: server does not support RFC 5746, see CVE-2009-3555

    Since transferring data from my desktop to my laptop, i am now having problems copying and pasting details from my bank website in to a word document, the formatting is all over the place. This didnt happen before, when i pasted the details in to the word document the formatting was exactly the same as on the webpage. If I use internet explorer, I dont have this problem, so, I can only assume it has something to do with Firefox. I have checked the "Error console" and I am receiving this message: server does not support RFC 5746, see CVE-2009-3555.

    Maybe:<br />
    Dafizilla Table2Clipboard: https://addons.mozilla.org/firefox/addon/1852

Maybe you are looking for

  • Where did the recent history dropdown go??

    The very convenient recent history drop-down, you know next to the forward/back arrows upper left, is nowhere to be found in the newer Firefox versions. Can I get it back? Can I go back to 3.5 and use it??

  • MB_MIGO_BADI. Post document. Posting date?

    Hi Guys, I need your help. I'm using MB_MIGO_BADI, method post_document to change posting date in header. After user changed the posting date I need to check some conditions and if they are fulfilled I want to change this posting date with sending th

  • Is there a forum for Eclipse here or "out there"?

    Hi, I use Eclipse for development, but don't know how to debug and compile with "-target 1.1" and "-bootclasspath ...\jdk1.1.8\lib\classes.zip" as javac options. I like Eclipse so the question is not if I can do this easily in Forte, but more if some

  • Elements 10 did not install properly but blocked my computer - need help, please!

    I've purchased an Elements 10 software, the requirements are met with my computer (My computer has 4G RAM), yet, after I had installed it and clicked on the icon for the first time, it blocked my computer (it became VERY slow for everything, like hal

  • Can't seem to print custom size paper

    I'm trying to print addresses on a 4 Bar envelope (3 5/8 x 5 1/8) on an OfficeJet Pro 8000 wireless, from a Mac.  I read all the posts here and nothing seems to work for me.  I keep getting errors like: Paper Size Error: The paper size selected in th