I am Having trouble exporting from a small USB drive to external hard drive

Hello I have several small usb removable drives, which in would like to put onto an external hard drive. When I try to do this it will not let me do it. The external hard drive comes up in the hard drive of the computer and the small USB comes up in removable drives. I have tried everything I can think of, but it still will not move them from the small removable drive to the external. I have been trying to save them is this where I am going wrong, should I be copying them instead.
any help greatly appreciated

These forums are for addressing matters to do with Adobe software products. You should find a site with a forum that talks about how to work with your computer.

Similar Messages

Having trouble getting Time Machine to back up my external hard drive. Any suggestions?

I'm running Mountain Lion on my iMac and I've been using Time Machine to back it up to my Time Capsule. Recently, the iMac's hard drive filled up, so I moved my iTunes library to a new Airport Time Capsule. But I can't seem to get Time Machine to include the new Airport Time Capsule in its back up.
The only suggestion I can find is to make sure it's not excluded in the Time Machine options, and I can see that nothing is excluded. However, when I go into Time Machine, the Airport Time Capsule is greyed out in the Finder window.
Anyone have any ideas? Thanks in advance, I'm a little nervous about having my iTunes library hanging out there without a back up...

Linc Davis wrote:
You can't back up the internal drive of the Time Capsule with Time Machine. It will only back up locally attached storage devices, not network devices. There's no way around it. You may be able to back up the TC with third-party software such as "Carbon Copy Cloner," but it will be very slow. The internal drive of the TC is only suitable for use as a backup device. It's not suited for storing original data.
yeah well you can use the external hard drive as a data extension to the time capsule internal hard drive. like a RAID in effect...

I am having trouble exporting from LR4. After I have developed the photo in LR and export the image, then when I open it in Photoshop, it does not retain any of the developing I just did in LR.

When I export my image and open in Photoshop CS5, none of the developing I have just done in LR4
is in the file. It is basically exporting a raw image with no developing.

Exporting is the wrong procedure.
In Lightroom, right-click on the photo and select Edit In

I am having trouble exporting closed captions from premiere cc 2014.

I am having trouble exporting closed captions from premiere cc 2014. I see them in the program monitor but after i export and try to playback in either quicktime or VLC i get to embedded captions. I eve tried the side car file and embedded with compressor and still nothing. Any help would be appreciated.
I only used compressor because i switched from final cut to adobe. easy fellas!

I have latest QT version, do i need to go back to 7? I have tried VLC also, i usually use that to check CC in mpeg files. I am exporting a QT H.264 for just testing purposes, I need a prores HQ, also this is SD so my sequences are set to 720x486.

I am having trouble exporting .raw files to an external storage device. Even though I export "original" they end up as jpeg files. Any idea what I am doing wrong?

I am having trouble exporting .raw files from my Mac Book Air to an external storage device. Even though I am exporting as "original" they are being exported as jpegs. Anyone have an idea what I am doing wrong?

Using the "original" setting is the correct way to do it. Select on of the photos and use the File ➙ Reveal in Finder ➙ Original menu option. That will take you to the file inside the library via the Finder. Confirm that what you see if the raw file.
If it is then try the following: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

I am having trouble printing from my computer. The printer keeps giving me an error message.

I have an hp officejet 6500A printer, i am having trouble printing from my computer which is an hp windows 7 64-bit to my computer. I keep recieving an error message on the printer stating that the paper size or type does not match. What do I need to do to get my computer to print to my printer?

Hi - A couple of things to try. First, in whatever app you're in, go into File, Print and Printer Properties and set the paper size appropriately. After that, go into Page Setup in whatever app you're in and set the appropriate size in there as well. In many cases, this problem is caused by different sizes being set within the printer driver and the app. If that doesn't work, go back into Printer Properties and try choosing a different paper type (Plain Paper). I've also had that resolve the problem before.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

TS1814 we bought an ipod touch and are having trouble switching from old ipod to the new one

we bought an ipod touch and are having trouble switching from old ipod to the new one

OK.
If you have a question, then explain your issue and ask it.

I am having trouble exporting my responses, how do I save all responses as an Excel table?

When I click on the Save as Excel button, and then click OK to export all cells to Excel, it gets stuck "Converting..." and does not process.

I'm also having trouble exporting my responses. I get a message that says:
I was able to copy everything and make my own excel sheet, but would still like to know what I can do.. And it's not only for this one form, I get the same response for all my forms.

I'm having trouble texting from my IPAD. Sometimes it looks like its searching and other times I get a red exclamation point.

I'm having trouble texting from my IPAD 2. Most of the time it looks like its searching or I get a red exclamation point.
I was only able to send 2 texts. Help!

iPads cant send regular texts - only through iMessage meaning that the other device will need to have iMessage too.
If you can't send a text that means the other person does not have iMessage and iMessage is only installed on iOS devices or OSX Lion

I dropped my iphone in the snow and now I am having trouble hearing from it. I heard that sitting it in rice helps. True?

I dropped my iphone in the snow and now I am having trouble hearing from it. I heard that sitting it in rice helps. True?

but if it is already fried that wont let and your going to need to get it replaced

How do you export your iphoto library from a mac air to an external hard drive to free up space on the mac air

how do you export your iphoto library from a mac air to an external hard drive to free up space on the mac air

Go to Pictures folder and copy the library to the external drive. Then, open iPhoto holding Option key and select the library in your external disk. Finally, delete the library on Pictures

Having trouble installing Arch Linux to USB key

Hello,
I have read the wiki article, but it doesn't answer my question. I am having trouble installing Arch to a USB key (8GB Sandisk Cruzer). I installled GRUB correctly, it booted, but the flash drive was write-protected. In the fstab file, I have the defaults and noatime flags in there. I have never experienced an error like this, and I don't know how to fix it. I have tried to reboot into the Arch CD and mounted the USB, but it just stalls and displays no output. Obviously, if I boot into my USB (you can still boot into it), and do "nano /etc/fstab", it says that I cannot write. In case you were wondering, I am using the root user. Thank you for all your help!
EDIT: I have Syslinux, the kernel parameters is RW. If I run mount -o remount,rw /dev/sda1, it tells me something like:
ata3.00: status: {DRDY ERR}
ata3.00: error: {IDNF}
end_request: I/O error, dev sda, sector 21
Buffer I/o error on device sda1, logical block 0
EXT4-fs error (device sda1): ext4_remount:4665: Abort forced by user
I did NOT hit CTRL+C.
Last edited by aqua123 (2013-09-07 02:01:30)

I'm a nub, and I think I'll piggy back of aqua's post. Perhaps we have the same problem
I have an Asus UX31A with Xubuntu (with grub) currently installed. I created the bootable USB as per the Arch Wiki UEFI bootable usb page. I can boot into the main prompt where you can choose "Arch Linux Iso", "shell v1", "shell v2" and "Default prompt."
Choosing the first option (to get to the the command prompt and begin installing) makes the screen flash once, then just hangs black. Before the flash I think I see three text lines in the upper left corner, but they flash so fast I can't read them.
Choosing either of the shell options presents the error:
"Error loading \EFI\shellx64_v1.efi: Unsupported" (replace "v1" with "v2" for the other option)
Any thoughts?

I am unable to copy files from my macbook pro to my external hard disk.

I am unable to copy files from my macbook pro to my external hard disk. I tried to copy a movie 800mb in size to my EDD and it shows the loading box and it says zero kb loaded out of 800mb and sometimes it loads a a few kb of the file, then after a while it ejects my hard disk and gives a message saying you should have ejected it properly. and it sometimes gives this message
"The Finder can’t complete the operation because some data in “....” can’t be read or written.
(Error code -36)".
This happens with a range of files if they are more than a few mb in size, so I am pretty sure its not the file problem. It also occurs sometimes when i try to copy from my EDD to my mac.
I have tried everything. I formatted my EDD to MS-DOS (FAT) format because i need to use it with mac and windows. I tried resetting The SMC and the PRAM and NVRAM. I tried verify and disk repair on disk utility. But the same thing happens over again and it is really frustrating. The problem doesnt happen with my PC.
My EDD is an Apollo 320GB hard drive from Imation.
Also are there any particular EDD brands that may not have this issue with MACs and can be used on mac and PC?
Thanks in advance!

Hey guys,
So this is follow up from my debarkle with the EDD. I found out my problem with copying files from Mac to EDD and vice versa was a result of a not so good EDD ( i had an apollo hard drive from imation) that was not very compatible with macs. So i did my research and found out that the best hard drives were Western Digital and Seagate. I bought the newest western digital EDD 1TB and formated it to FAT32 and guess what...no problems so far. The only problem is that FAT32 format doesn't copy files larger than about 4 gigs so i couldnt copy a movie from my brothers computer onto my EDD that was 1080p. You could probably resolve that by partitioning a small part of your hard drive in ExFAT? but yeah, hopefully that helped guys.
Aaisha

I was trying to move my photos from the iPhoto library to an external hard drive. I now have a desktop display of thousands of cascading photos. How do I remove them from my desktop screen?

I was trying to move my photos from the iPhoto library to an external hard drive. I now have a desktop display of thousands of cascading photos. How do I remove them from my desktop screen?

Strangely enough we can not see you so it really helps if you share with use exactly what you have, exactly what you did and details about the problem
what version of iPhoto and of the OS? What exact steps did you do? where are you seeing these "thousands of cascading photos" now and using what software and what exactly did you want to accomplish
The correct way to move your iphoto library to an external drive is to verify the drive is formatted Mac OS extended (journal) and then drag the iphotl library intact as a single entity to is
The correct way to move some or all of your photos is to select them in iphoto and export 9file menu ==> export -- https://discussions.apple.com/docs/DOC-4921 ) to the external drive
LN

I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac

I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?

Mixing files with data is not always great idea.
See info here.
Q3 http://pondini.org/TM/Time_Capsule.html
Why not just connect the PC directly to the TC by ethernet and copy the files over?
It is hugely faster and much less mucking around.
In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
There is more info here.
http://support.apple.com/kb/HT1331

I am Having trouble exporting from a small USB drive to external hard drive

Similar Messages

Maybe you are looking for