I am having trouble exporting from LR4. After I have developed the photo in LR and export the image, then when I open it in Photoshop, it does not retain any of the developing I just did in LR.
When I export my image and open in Photoshop CS5, none of the developing I have just done in LR4
is in the file. It is basically exporting a raw image with no developing.
Exporting is the wrong procedure.
In Lightroom, right-click on the photo and select Edit In
Similar Messages
-
My computer continually asks me to enter my password for Keychain access. This problem is continuos and I am having trouble with eliminating it.
I have changed my password through Security and my Accounts numerous times to no avail.
Is there anything I can do other than Resetting the entire computer and re installing all of the software, apps, etc.etc.Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences... ▹ First Aid
There are four checkboxes in the window that opens. Check all of them. if they're not already checked. Close the window.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.
If you use iCloud Keychain, open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device. -
Getting this error message as of this morning: The version of iOS on “iPad” does not match any of the versions of iOS supported for development with this installation of the iOS SDK. Please restore the device to a version of the OS listed below, or update to the latest version of the iOS SDK. I've downloaded the latest SDK and gone through the usual turn off and turn on again for iPad and computer, removed and reinstalled the iPad from Organizer and have no idea how to make apps build now. I was prompted to update the iphone too but there's no way I'm updating it if this issue can't be resolved.
Okay these are the steps I took to solve the problem - they may not be the right ones for you but they've solved the problem and saved time hunting for some other solution. Firstly I changed my MAC system to Lion with the £20 download, then I deleted the old Xcode and installed the new version that is app based and doesn't support Snow Leopard, then all was well. I can now update my xcode via the app which is quicker and more logical and can update my iPhone rather than chug along avoiding updates as I need to update my existing apps on the app store and upload a new one.
-
After doing a Google search - when I click on a link it does not take me to the correct website. Instead it always take me to some icity webpage. How do I fix this so that Firefox takes me to the correct website that the Google search found?
After doing a Google search - when I click on a link it does not take me to the correct website. Instead it always take me to some icity webpage. How do I fix this so that Firefox takes me to the correct website that the Google search found?
-
my iPad 1 does not make any of the sounds (key clicking, etc) I have directed it to despite having volume turned all the way up...any thoughts?
Check to see if the "silent" switch is turned on. This is either the hardware switch next to the volume control or a software switch on the "recent apps" tray depending on how you have your iPad configured (Settings > General).
Too see the software switch on the "recent apps" tray double-click the Home button and swipe the tray to the right. -
my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description: Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address: 192.168.1.5
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sat Dec 31 13:46:09 2011
Lease Expires: Tue Jan 03 13:46:09 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number: 86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me). -
Output map: Document Type does not match any of the given schemas
On a send port, we have a map that uses a custom xslt. We were hoping to somehow design the map so the output was essentially a generic xs:any schema. But unless we ad a reference from our map assembly to the assembly that holds the actual schema for
the message pertaining to the map out put we get an error:
The Messaging Engine failed while executing the outbound map for the message going to the destination URL "C:\BizTalk\Test\%MessageID%.xml"
with the Message Type http://test#testmessage. Details:"Document type "outputtest#outputtestmessage" does not match any of the given schemas.
Is there a way to avoid having to have the reference?Hi ,
In BizTalk messages are distinct from each other based on the message type . In your case http://test#testmessage (Namespace#RootNode)
Now coming to your case have you verified whether you have a schema type matching the response is deployed with the solution. The easy way is to look into specific BizTalk application schema node .
If not ,What you can do is to create a new schema for output having "TestMessage" as record and any element inside it. After that apply a mass copy
funtiod from source t destination(in your case any type schema created).
Thanks
Abhishek -
My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it from Adobe via internet the first time december 2013?)
Did you download the Basic/Free version?
I also thought the Trial period was as long as you needed!?
What is your Warranty and Return Policy?
You get to use VueScan for as long as you want before you buy it, so we recommend you test it before you buy it to make sure it meets your needs.
All sales are final and there are no refunds.
Isn't this a bit harsh? Naah I actually prefer to solve problems, and if I offer refunds, people give up too easily. If I can't solve your problem after you send a few Problem Reports (see above), I'm happy to give a refund.
http://www.hamrick.com/sup.html#q -
Method 'publishCatalog' does not match any of the valid signatures for mess
When I run my client, I get "Method 'publishCatalog' does not match any of the valid signatures for message-style service methods" I know that it means that my web service method should conform to one of those 4 methods (http://ws.apache.org/axis/java/user-guide.html#ServiceStylesRPCDocumentWrappedAndMessage), and I made it conform, yet I still get that error.
Here's my Service and Client code:
import org.w3c.dom.Element;
import org.apache.axis.client.Service;
import org.apache.axis.client.Call;
import org.apache.axis.message.SOAPBodyElement;
import org.apache.axis.utils.XMLUtils;
import java.io.File;
import java.io.FileInputStream;
import java.net.URL;
import java.util.Vector;
public class CatalogPublisherServiceClient {
public static void main(String[] args) throws Exception{
String endpointURL="http://localhost:8080/axis/services/CatalogPublisherService";
org.apache.axis.client.Service service = new Service();
Call call = (Call)service.createCall();
call.setTargetEndpointAddress(new URL(endpointURL));
SOAPBodyElement[] reqSOAPBodyElements = new SOAPBodyElement[1];
File catalogFile = new File("catalog.xml");
FileInputStream fis = new FileInputStream(catalogFile);
reqSOAPBodyElements[0] = new SOAPBodyElement(XMLUtils.newDocument(fis).getDocumentElement());
SOAPBodyElement[] resSOAPBodyElements = (SOAPBodyElement[]) call.invoke(reqSOAPBodyElements);
SOAPBodyElement resSOAPBodyElement = null;
for(int i=0; i<resSOAPBodyElements.length; i++){
resSOAPBodyElement = (SOAPBodyElement)resSOAPBodyElements;
System.out.println(XMLUtils.ElementToString(resSOAPBodyElement.getAsDOM()));
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.soap.MessageFactory;
import javax.xml.soap.SOAPMessage;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.NodeList;
import org.w3c.dom.Node;
import org.w3c.dom.Text;
import java.util.Vector;
import java.util.Date;
import java.text.SimpleDateFormat;
import org.apache.axis.MessageContext;
import org.apache.axis.utils.XMLUtils;
import org.apache.axis.message.SOAPBodyElement;
public class CatalogPublisherService {
public SOAPBodyElement[] publishCatalog (SOAPBodyElement[] soapBodyElements) throws Exception {
Element soapBody = (Element)soapBodyElements[0];
NodeList productList = soapBody.getElementsByTagName ("PRODUCT");
int productCount = productList.getLength();
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
factory.setNamespaceAware(true);
DocumentBuilder builder = factory.newDocumentBuilder();
Document responseDoc = builder.newDocument();
Element resRoot = responseDoc.createElementNS("http://www.axis03.ws", "CATALOGUPDATE");
resRoot.setPrefix("CU");
Element itemCount = responseDoc.createElement("ITEMCOUNT");
Text itemCountText = responseDoc.createTextNode (String.valueOf(productCount));
Element dateReceived = responseDoc.createElement("DATERECEIVED");
SimpleDateFormat sdf = new SimpleDateFormat("MM/dd/yyyy");
String date = sdf.format(new Date());
Text dateReceivedText = responseDoc.createTextNode(date);
//Append the child elements appropriately
resRoot.appendChild(itemCount);
itemCount.appendChild(itemCountText);
resRoot.appendChild(dateReceived);
dateReceived.appendChild(dateReceivedText);
SOAPMessage message=null;
MessageFactory msgFactory = MessageFactory.newInstance();
message = msgFactory.createMessage();
SOAPBodyElement[] result = new SOAPBodyElement[1];
result[0] = new SOAPBodyElement(resRoot);
return(result);That's a really helpful answer and not smug at all, thanks Carey.
I just downloaded a DVD image from my university's MSDN Academic Alliance program, named "Microsoft
Windows 7 with Service Pack 1 Debug/Checked Build 64-bit (English)", which I wanted to use to install over an existing 32-bit version. I thought the install screen was giving this weird unskippable error described in the OP before I even entered
a key because the 32-bit key I had used on the HDD was somehow interpreted to be used in an upgrade, but no. Even after I wiped the hard drive, this error persisted.
Guess I'll go Google some more on how to install my legit copy of Windows, because this self-serving shit sure isn't helping.
edit: IF YOU GOOGLED THIS AND ARE STILL LOOKING FOR YOUR ANSWER, CHECK HERE:
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404b-9b7f-2065bdb91011 -
how do you manage to install windows 7 when the message on the screen is "The product key entered does not match any of the Windows images available for installation. Enter a different product key. "
That's a really helpful answer and not smug at all, thanks Carey.
I just downloaded a DVD image from my university's MSDN Academic Alliance program, named "Microsoft
Windows 7 with Service Pack 1 Debug/Checked Build 64-bit (English)", which I wanted to use to install over an existing 32-bit version. I thought the install screen was giving this weird unskippable error described in the OP before I even entered
a key because the 32-bit key I had used on the HDD was somehow interpreted to be used in an upgrade, but no. Even after I wiped the hard drive, this error persisted.
Guess I'll go Google some more on how to install my legit copy of Windows, because this self-serving shit sure isn't helping.
edit: IF YOU GOOGLED THIS AND ARE STILL LOOKING FOR YOUR ANSWER, CHECK HERE:
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404b-9b7f-2065bdb91011 -
The document type does not match any of the given schemas
Hi,
I have created an envelope schema.To precisely process inbound envelope documents,in the xml disassembler component i have used the Documentspec and envelopespec properties.
in the properties i have the the schema name,Assemblyname
but i have got the error like The document type does not match any of the given schemas.
I have verified the schemas have deployed properly.
can you help me on this?Hi Sujith,
As pointed out by Johns lot's of thing can cause this. You have to analyze lot of things, but this kind of error indicates that the message type that you are debatching is not deployed. For Example :
If you are debatching on Order than Order schema should be deployed in the admin console.
One more point that you need not to specifiy Documentspec and envelopespec properties until and unless there are multiple schema's of same message type deployed in different assembly. The dissasembler component will automaticaly disassemble the messages
just looking after the body XPATH.
Regards,
Rahul Madaan -
Windows 8 error "product key does not match any of the Windows images available for installation"
Hi Experts
My HP Pavilion laptop came with window 8. I made the USB recovery for windows 8 using hp recovery manager. My windows was corrupted, while I was trying to install windows 7 in dual boot.
I used above USB recovery to restore factory default. But every time it is giving me error "HP Recovery Manager Failed error code = 0xefffff08"
Then I downloaded the OEM ISO mage for windows 8 and tried to do the clean install but now installation process is giving me error "The product key entered does not match any of the Windows images available for installation. Enter a different product key"
Please help me. To whom I have to contact?Hi ghost-rider,
Thank you for your query, I will do my best to assist you.
I understand you tried to do a recovery and you received this error "oxefffff08".
First I would suggest you run a hardware diagnostics. Testing for Hardware Failures (Windows 8)
If no hardware failures are located, you have ruled that possibility out.
Here is a link to Troubleshooting HP System Recovery Problems (Windows 8) that may help.
If you are still having an issue doing a recovery, I suggest contacting HP support and explain the issue you are having with doing a recovery. They may have another option available for you.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region Technical Support Sitemap
The clean install from an OEM image is looking for the product code as it does not match the one that came with the computer, You would need a new code.
I hope this has helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
The document type does not match any of the given schemas. batching
I am aggregating messages(batching) in Orchestation by calling pipeline. I have send pipeline where I have standard assemble component and custom pipeline in encode to assign some values .
When I test it I get following error There was a failure executing the send pipeline: "Zones._870.Pipeline.Send870Pipeline, Zones.870, Version=1.0.0.0, Culture=neutral, PublicKeyToken=51b3a99d8425ff5a" Source: "ZonesAssignGUID" Send
Port: "SendToAX870" URI: "C:\File_Out\Ingram\870\%MessageID%.xml" Reason: The document type "http://schemas.microsoft.com/dynamics/2011/01/documents/Message#Envelope" does not match any of the given schemas.
Can somebody help me how to resolve this issue?Yes this is configured schema as envelope schema. This one is deployed in biztalk . I tried whatever suggest below query and return one record. Not sure but looks like error message misguiding here.
select * from BT_DocumentSpec where msgtype like '%http://schemas.microsoft.com/dynamics/2011/01/documents/Message#Envelope%' -
When working on document in numbers and saving it I then try to open on iPad. It is not syncing what do I have to do after using on Mac to then be able to upload on iPad. I have set cloud up and it works with keynote
Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry. -
On my Mac Pro, early 2008 2 x 2.8GHz Quad Core 10.7.5, replaced 4 x 500ghds with 4 x 3Tb. The Raid card Raid 5ed them OK but can not load time machine back up as it does not see any of the 4 drives, neither does disc utilities, any thoughts?
You don't see drives when using a hardware RAID only the volumes.
WD Green are not suitable for hardware RAID (or software RAID for that matter).
USB2 and TimeMachine are a disaster waiting to happen. I've used SATA (internal) and eSATA (using SATA PCIe cards) trouble-free.
I can't say I begin to understand your use or "choosing the install drive for the backup"
Install what?
You don't load TimeMachine. Maybe seems minor but that is not how to describe the behavior of software.
You read FAQ and How To http://www.apple.com/support/timemachine
Time Machine’s Gory Details:
https://www.apple.com/support/timemachine/
TimeMachine 101
https://support.apple.com/kb/HT1427
Lion Recovry & TimeMachine
http://www.apple.com/support/lion/installrecovery/
http://www.apple.com/support/lion/
How To Restore Your System
http://pondini.org/TM/14.htmlMac OS X v10.7 Lion
Pondini's Blog: Time Machine - Troubleshooting -- B5. Would you like to inherit (or re-use) the backup . . . ?
Maybe you are looking for
-
HT5467 Why is my default camera app not appearing in the location list?
Any photo taken by the native camera app in ios6 (after a restore from ios5.1 to ios6) no longer includes gpsinfo. The default camera never asked for permission, nor is it found in the location data list under privacy settings. Even resetting the pri
-
How to remove the junk files from my Phone E7?
Hi I want to know if there is any junk files cleaner available for Symbian belle E7 phone. I have come to know many junk file cleaner like X-cleaner, mobile cleaner 1.8 available but whenever I want to install those files in E7, it displays that in
-
Currency display issue in the report
Hello Experts, I am facing an issue with the currency type CLP(Chilian Peso). It is noted that the CLP currency doesn't use decimals. In BW reports the values in Local Currency are not OK. For example , the right value is 150.755 CLP in R3 side But
-
What are the chances of this thing actually working?
Hey there, over the next few sentences you'll probably be thinking I'm a hobo or something but whatever. I found an iPhone on the footpath today and it was kinda wet from inside. When I got it home and took it apart to see how much water was inside,
-
Tables & Variables in Transaction
Hi experts, How to find the tables and variables that are used in a standard transaction? As for as i know by going to the particular transaction and by pressing f1 in the particular field. Whether there is any other method? Regards.... Arun.