I am having trouble getting my ipad to recognize the sat connection have turned off and back on it shows there but does not load safari

I am having trouble getting my ipad to communicate with sat connection I have tried turning off and on re installing the sat connection but still cannot get safari to load

Hello Brenda,
Thank you for the details of the issue you are experiencing with your iPad.  It sounds like you're not able to access the Internet on your iPad.  I found a couple of resources that will help.
If you are having trouble connecting to the Internet using Wi-Fi, I recommend the following article:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
If you are not able to access the Internet when connected to a cellular network, I recommend the following article:
iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
http://support.apple.com/kb/TS4249
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

  • I am trying to boot Ubuntu 12.4 on my iBook G4, but am having trouble getting my iBook to recognize the boot disk in the CD Drive.  Why?

    I am trying to boot Ubuntu 12.4 on my iBook G4, but am having trouble getting my iBook to recognize the boot disk in the CD Drive. 
    I have pressed "C" during boot to force it to boot from the Optical Drive.  It boots normally.
    I have pressed "option" to get the boot menu.  The only option available is my hard disk drive.
    I have pressed "option""command""shift""delete" at the same time during boot to force it to skip booting the hard disk.  I get a blinking smily face/question mark for a while, then it shows the boot menu, at which point the only available option is my hard disk drive. 
    In system preferences in OS X I have looked to change the boot drive, but the only option, again, is the hard disk.
    Can I not boot from the Optical Drive?
    Why?

    Hello,
    From the link I provided it says:
    Nearly all open-source software is available to download from the Ubuntu repositories, but the amount of proprietary software available for PowerPC linux is limited. You will have the same version of Firefox, LibreOffice, etc as other architectures.  
    Notable absentees are: Chrome/Chromium, Adobe Flash (although open-source alternatives are available, see below), Wine (however Qemu can be used, see below), ndiswrapper, proprietary video drivers and Dropbox (but, you can use Ubuntu One).
    I do recall it being very limited when it came do downloading Linux software that supported PPC.
    You wouldn't be any better off than using firefox or safari on Mac OS X 10.4.11.
    If your looking for a faster and more compatible web browser then I would suggest the following, which I've recently found very useful on Mac OS X 10.4
    http://www.floodgap.com/software/tenfourfox/
    Hope this helps.

  • Having trouble getting my bluetooth from iPhone 5 to connect with PolarH7 Heart Sensor.

    Having trouble getting my bluetooth from iPhone 5 to connect with PolarH7 Heart Sensor. when in settings Bluetooth is on but not reading devide ( it satyas at Now Discoverable) .

    bradbev,
    Welcome to the community! Thanks to everyone for the help. I do agree that adding and removing the Yahoo! e-mail account is the best first step to get this resolved. Below I have the steps to remove and re-add the account.
    Remove a Personal Email Account
    Add a Personal Email Account
    Thank you!
    AdamE_VZW
    Follow Us on Twitter @VZWSupport

  • Why am I having trouble importing vCards? I follow the Help Center instructions by dragging and dropping, but some don't sync into the cloud. And why can't I drag multiple vCards? I have over 4,000. Please tell me I don't have to do one at a time?

    Why am I having trouble importing vCards? I follow the Help Center instructions by dragging and dropping, but some don't sync into the cloud. And why can't I drag multiple vCards? I have over 4,000. Please tell me I don't have to do one at a time?

    carolinechx wrote:
    i know the description may be a little bit too confusing
    Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

  • How do I get my ipad to recognize the microphone on my earbuds?

    How do I get my ipad to recognize the microphone on my arbuds?

    Hi,
    You'll need to make sure that both your printer and iPad are connected to the same wifi network (your home wifi). When this is complete, your printer should see your iPad.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Has anyone else had trouble getting your PC to recognize the Ipod

    Has anyone else had trouble getting your PC  to recognize the Ipod

    Try the steps in this Apple support article:
    http://support.apple.com/kb/TS1538
    Regards.

  • TS1367 I was having a problem down loading photos, so I force quite all programs.  Then there was problem launching finder.    Relaunched and turned computer off to reboot.    Now computer starts, but does not boot up  I am stopped at a white blank screen

    I was having a problem down loading photos, so I force quite all programs.  Then there was problem launching finder.    Relaunched and turned computer off to reboot.    Now computer starts, but does not boot up  I am stopped at a white blank screen

    Welcome to Apple Discussions Dathanb
    You have posted in the Feedback About New Discussions forum.
    As you are a first time poster, you seem to have missed the text at the top of this forum that says:
    Please Read This Before Posting Here
    If your question concerns a hardware or software technical issue, please do not post in this forum
    Go to the main Apple Discussions page, select an appropriate product category and follow the links until you reach the correct forum for your post, then click the POST NEW TOPIC link. Because your post doesn't indicate was OS you are using on your iMac, I can't give you a link to the most appropriate forum.
    Basically, though, the version of TechTool on the AppleCare disks is not compatible with newer versions of OS X and/or Macs (I can't remember which). If you don't get a satisfactory response by posting in the appropriate iMac or OS X forum, I suggest you take your iMac to the geniuses at the Apple Store. You can set up an appointment time for the same day online before you leave home.
    Peggy

  • I have Windows 7, and I am being told that it does not support the newest Ai Illustrator, Are there any other alternate routes I can take to get adobe illustrator and photoshop on my computer? Perhaps an earlier version? Thanks! ~

    I have Windows 7, and I am being told that it does not support the newest Ai Illustrator, Are there any other alternate routes I can take to get adobe illustrator and photoshop on my computer? Perhaps an earlier version? Thanks! ~

    houseofrest,
    According to this page, you can use it for CC:
    Adobe Illustrator CC for Mac, Windows, PC - Tech specs
    Or you can buy CS6:
    http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-illustrator.html

  • My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what can I do to start my iPad?

    My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what else can I do to start my iPad?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • Before removing iPhoto (latest update crashed the app), I accidently removed it from my purchased Apps from the App Store. I accept iPhoto when I search for it, but does not put it back in my list. How do I get this back so that I can reinstall iPhoto?

    Before removing iPhoto (latest update crashed the app), I accidently removed it from my purchased Apps from the App Store. I accept iPhoto when I search for it, but does not put it back in my list. How do I get this back so that I can reinstall iPhoto?
    Thank you.

    I found the answer just after posted this.  Thanks to a user named CloudWalker.  Solution is to go in AppStore, View Account under "Store" Menu and unhide any purchases.

  • Has anyone tried to pair the Tzumi bluetooth headphones to their iMac?  My iMac will detect the device, connect to it for about 2 seconds, then shows a status of "not connected".  Multiple attempts get the same result.

    Has anyone tried to pair the Tzumi bluetooth headphones to their iMac?  My iMac will detect the device, connect to it for about 2 seconds, then shows a status of "not connected".  Multiple attempts get the same result.

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • Very big icons on my screen.  Have turned off and on.  Cant get rid off.  Cant downsize screen to enter my pin.  Sems blocked or stalled.  What to do?

    Very big icons on my screen.  Have turned off and on.  Cant get rid off.  Cant downsize screen to enter my pin.  Sems blocked or stalled.  What to do?

    Double tap with THREE fingers to turn zoom off. Then go into Settings>General>Accessibility and turn zoom off for good.

  • HT4623 iPad air won't automatically connect to wi fi unless I turn off and back on again??

    My iPad air will not automatically connect to wi fi unless I turn off and then back on again, any suggestions as to why?

    Hello Juanita289
    Check out the article below to troubleshoot issues with connecting to WI-Fi. You may want to reset the Network Settings by going to Settings > General > Reset  > Reset Network Settings. It will not delete remove any personal data besides and known Wi-Fi networks that you have joined in the past.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Regards,
    -Norm G.

  • Having trouble getting rid of all of the mackeeper ads that I keep on getting Safari via Mozilla Firefox

    I mean after I clicked on ad for mackeeper, by accident.  Its been happening for almost a wk now.  Even after trying to keep fixing it myself.  In which I finally decided to remove Mozilla Firefox altogether because I been getting them on there as well.  In which I went to Opera Web Browser because after all I found it via the app store.  At the same time I'm also having trouble with getting used to Opera again.  Basically, have already tried Opera, but had trouble with it and went back to Mozilla Firefox after that until now.        

    There is no need to download anything to solve this problem.
    You may have installed the "VSearch" trojan. Remove it as follows.
    Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • I am thoroughly feed up with itunes store!!!!  I have changed my password and for the last two days I have been trying to get my ipad to recognize the new password and allow me to make purchases at the store.  I've gone into settings and made the updates.

    Help!!!  Ok, if they don't want me to buy stuff, then ok, I won't waste any more money on their products!!!

    Try closing the App Store app (and iTunes if open) via the iPad's multitasking bar and see if it works when you re-open it : double-click the home button to open the taskbar, and then swipe or drag the App Store app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
    You could also do a soft-reset (i.e. a reboot) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear.
    And try logging out and in via the Featured tab in the App Store app and see if that makes any difference.

Maybe you are looking for