I am having trouble installing a Roland UM-One driver that is supposed to be compatible with this OS (10.7.1).  Any suggestions?

I am having trouble installing a Roland UM-One midi interface driver  that is supposed to be compatible with this OS (10.7.2).  Any suggestions?

Well, let's hope that nothing was jiggled out of place when you were installing the new hard drive. Your optical drive may just be out of alignment or the disc you have is "dirty." Get a lint-free cloth and some rubbing alcohol, then clean the disc as thoroughly as you can starting from the center and working outward in a concentric circlular motion. See if that helps. In particular clean the inner portion well.
If this does not help, then you have a problem. You have opened the computer yourself. That action voids all support from Apple. If you take the computer in for service the store may refuse to service the computer. This is not related to your now expired warranty.

Similar Messages

  • After installing the latest iOS update, my iPhone 4S is no longer compatible with Bose Sound Dock...any suggestions?

    After I installed the latest iOS update, neither mine, nor my wife's iPhone work on our 12 month old Bose Sounddock...any suggestions?

    You can use the stereo input on the Bose.

  • I am having trouble reading some books bought from ITunes and loaded onto my Cocoon ereader which supports  Adobe DRM content.  Any suggestions?

    I am having trouble reading some books bought from ITunes and loaded onto my Cocoon ereader which supports  Adobe DRM content.  Any suggestions?

    matty_234 wrote:
    Will this enable me to plug my iPhone in without any changes or reformatting? ...
    If you follow all the Steps in the Link it should...
    matty_234 wrote:
    .... Also, I guess this will overwrite the purchases already on my mac? ...
    You can redownload them for free...   http://support.apple.com/kb/HT2519
    matty_234 wrote:
    ... One last thing, does this include the iphone backups?...
    Everything that is in iTunes should be there...

  • Having trouble Installing OS on New Hard Drive

    I just tried to Install OS X on my new Seagate Momentus 7200.3 HD with the install disk that came with my new MBP. When I get to the prompt where it asks where you would like to install OSX no drive location is showing up. Can anyone help me?
    Thanks!

    Mesaprs86, Any luck with that drive? I just got the same HD and the new MBP. I also bought an enclosure. I'm completely new to OSX. I have not even turned on the computer yet. Do I install the new drive into the computer and then install the software from the cd? Or do I have to copy the original HD to the new one in an enclosure? I've looked at the videos online, but they all seem to be aimed at people who are replacing a drive that already has been used for awhile. What is the best way to do a completely clean, new install. What did you end up doing Mesaprs86?

  • Having trouble installing and configuring new hard drive

    I bought a larger (320GB) Hitachi hard drive for my T61, to replace the 100GB that came with the computer. I had no touble making the physical installation, but can't boot up and use the new drive. I:
    --used Acronis software (True Image 11 and Disk Director) to partition the new drive. The new partitions are proportionately larger than on the old drive.
    --copied files from my original HD to the new one.
    --tried, unsuccessfully, to boot up from the new drive.
    --tried Thinkvantage software, but it wouldn't (1) recognize any external drives (USB HDD or my backup drive, also an external); (2) let me change the order of my boot devices (I get a synbtax-challenged message: "All items on this menu cannot be modified in user mode...[C]onsult your system supervisor." Well, *I'm* the "system supervisor," and I still can't get the program to let me edit the boot order).
    I have tried to boot the new drive from original OS software (XP Pro), with no success. Same deal with Acronis's emergency book disk. At the moment, I'm letting Thinkvantage reformat and (maybe) reinstall everything that was originally on the factory computer. Whether it'll actually do this on a new and larger hard drive, I guess I'll eventually find out. If it works, I'll then try to restore my real files with Acronis.
    Has anybody else had to deal with this exciting sequence of events?
    --Fred Powledge

    Lets start afresh. First do you want an XP or Vista system on your new hard drive? Do you know if the recovery disks you got with your system are for the operating system you want on the new drive?
    If you bought a Vista machine with XP downgrade Vista will be preinstalled on the system and it gets delivered with XP recovery disks. The opposite can also be true the machine is delivered with XP installed and with Vista recovery disks. Iin both cases if you want to upgrade to a new hard disk on the preinstalled operating system you must first yourself burn recovery disks for the preinstalled system. Start -- All programs -- Thinkvantage -- Create Product Recovery Media, first disk must be CD the last two can be DVDs.
    When you are sure you have the right set of recovery disks XP or Vista, boot from them and let them format the disk. They will automatically install the service partition and use all the remaining space of the new hard drive for the C partition. When I think about it even for Vista on the T61 there will be only two partitions C: and a hidden partition for the RnR service partition. The S and Q partitions only apply to the new T400/500 -- I should not have mentioned them.
    If its the recovery disks that were delivered with the machine that are the right one for the op sys you want on the new hard drive and they dont produce a bootable system -- call Lenovo support and get new ones.
    The details for Acronis I can't help you with -- I used my Windows home server backup when I restored my C: partitions on the new hard drives both on my T500 and my T42. Just be careful you dont mix up which is the old and new C: partition so you dont destroy the C. partition on the old hard disk by mistake. But as long as you don't point Acronis to the old hard disk the worst that can happen is you have to rerun the restore to factory settings on the new drive once more.
    T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

  • Still having problem with this sql select... any suggestions!  tx

    The following code has a result, I need to modify the select somehow which only gives me the rows which are common between all PLSTS.
    Any suggestions?
    Thank you
    SELECT DISTINCT P.PLST, P.MENU, I.PNL, P.ACCESS
    FROM AUTHITEM P, I.MENUITEM
    WHERE P.MENU = I.MENU
    AND P.PNL = I.PNL
    AND P.MENU IN ('MSN, CPP')
    AND P.ACESS >= 8
    AND EXISTS
    (SELECT K.PLST,COUNT (*)
    FROM AUTHITEM K, J.MENUITEM
    WHERE K.MENU = J.MENU
    AND K.PNL = J.PNL
    AND P.MENU = K.MENU
    AND I.PNL = J.PNL
    --AND P.PLST !=K.PLST
    --HAVING COUNT(*)   =2
    GROUP BY P.PLST, PMENU, I.PNL, P.ACCESS)
    This is the result with having count (*) = 2 and plst !=plst comment
    PLST MENU PNL ACCESS
    C001 MSN LNAME 14
    C002 MSN LNAME 14
    B008 MSN LNAME 14
    B005 MSN FNAME 14
    M009 MSN LNAME 14
    C001 MSN GNAME 14
    C002 MSN GNAME 14
    B008 MSN LNAME 14
    C001 MSN FNAME 14
    C002 MSN FNAME 14
    k008 CPP MNAME 14
    If I add having count (*) = 2, I do not get any results
    I need this result
    PLST MENU PNL ACCESS
    C001 MSN LNAME 14
    C002 MSN LNAME 14
    C001 MSN GNAME 14
    C002 MSN GNAME 14
    C001 MSN FNAME 14
    C002 MSN FNAME 14
    Thank you

      > I need this result
      > PLST MENU PNL   ACCESS
      > C001 MSN  LNAME 14
      > C002 MSN  LNAME 14
      > C001 MSN  GNAME 14
      > C002 MSN  GNAME 14
      > C001 MSN  FNAME 14
      > C002 MSN  FNAME 14
    i think based on your original posting what you need on your groupings are the columns MENU, PNL, ACCESS and exclude PLST.
      SELECT DISTINCT P.PLST, P.MENU, I.PNL, P.ACCESS
        FROM AUTHITEM P, I.MENUITEM
       WHERE P.MENU = I.MENU
         AND P.PNL  = I.PNL
         AND P.MENU IN ('MSN, CPP')
         AND P.ACESS >= 8
         AND EXISTS (SELECT 'x'
                       FROM AUTHITEM K, J.MENUITEM
                      WHERE K.MENU = J.MENU
                        AND K.PNL  = J.PNL
                        AND P.MENU = K.MENU
                        AND I.PNL  = J.PNL
                        AND P.PLST !=K.PLST
                     HAVING COUNT(*) = 2
                     GROUP BY PMENU, I.PNL, P.ACCESS)note: untested

  • I am having trouble installing (from disk) CS6 for Mac.  I have a new imac with SO 10.8.4.

    This is a screen shot of the error screen:  I have all other applications closed.  I still have CS4 installed for safety.  Any ideas?

    Have you reset the SMC?
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    While you're at it, resetting the PRAM won't hurt anything and 'might' help is SMC reset didn't work (PRAM does some port control):
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Something else you might try .... you don't say how you're updating to 10.6.8, however, if you're using Software Update, you might try downloading the 10.6.8 combo update, which contains all updates to 10.6. Sometimes, Software Update doesn't work quite right, and installing the combo update fixes that. Download the update from Apple's download site at http://support.apple.com/downloads/ , using Disk Utility repair permissions, apply the combo update, then repair permissions again.

  • I'm having trouble installing Itunes after my hard drive was erased and reinstalled

    I'm able to download the newest version of iTunes, but when it's almost finished, it gives me a message that says I need to exit out of iTunes, even though I'm not in iTunes.  When I click ok, it tells me the download can't continue.

    Refer to these articles:
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    iTunes: Back up your iTunes library by copying to an external hard drive
    http://support.apple.com/kb/HT1751

  • Having trouble installing adobe flash player- keep getting "Certificate Authintication failed", help

    having trouble installing flash player, keep getting "certificate authentication failed", did all the troubleshooting - did "unistall" stil nothing works.  Any suggestions

    What is your operating system & version?
    What is your web browser?
    [topic moved to Flash Player forum]

  • Having trouble installing on fedora 6

    hello all
    i am having trouble installing the oracle xe on fedora 6.
    i keep getting the error about this
    oracleXE: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
    ERROR:
    ORA-12547: TNS:lost contact
    if anyone can help that would be great.
    i tried to install the 32 bit version of libaio and it would not install because it said that a newer version was installed

    oracleXE: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
    i tried to install the 32 bit version of libaio and it would not install because it said that a newer version was installed execute following command from shell:
    uname -iIf the output is "x86_64" then install 64bit version of libaio (libaio-0.3.106-3.2.x86_64.rpm).

  • I am having trouble installing iTunes

    I am having trouble installing iTunes, getting the error stating that apple application support was not found. I have uninstalled and re-installed several time. I followed the directions giving on installation problems in the support area. Help please.

    Report the problem to Apple using Apple Support -- if it is 11.3  there is a problem with podcasts - and last time I checked on=line support page was not found.

  • Having trouble installing Oracale 8i

    I am having trouble installing Oracle 8i on my personal computer. I keep ending up with the same error message that the source path or destination paths are not correct. Can anyone please respond and tell me what the correct path is. Also I don't know if Oracle will work in Windows ME, that might me the problem.
    Thanks
    Jose

    I am having the same problem also with Oracle 8i. This happens to both the Personal Edition and Enterprise edition. I tried adding the parameter Jrew=0x00080000 in the Win.ini and also tried copying the CD to my hard drive. The same problem occurs in all istances. Anyone please help me urgently as I am unable to install the client components.
    Thanks
    Muru

  • I am having trouble installing Adobe Creative Cloud on my windows 7 laptop

    I am having trouble installing Adobe Creative Cloud on my Windows 7 laptop; i keep getting an error message
    this is what I get
    -- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} -----------  ERROR: Error 1316.A network error occurred while attempting to read from the file C:\Windows\Installer\AcroStan.msi  ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Error 1316.A network error occurred while attempting to read from the file C:\Windows\Installer\AcroStan.msi  ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603

    http://helpx.adobe.com/creative-suite/kb/error-1603-fatal-error-occurred-1.html
    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Mylenium

  • I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go.

    I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.

    Hold down the option key and select
     ▹ System Information...
    from the menu bar. In the window that opens, select
    Hardware ▹ USB
    from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown?

  • I am having trouble installing itunes on my computer. The error says, "Service Apple mobile device failed to start. verify that you have sufficient privileges to start system requirements." this is my home PC.

    I am having trouble installing itunes on my computer. The error says, "service apple mobile device failed to start. Verify that you have sufficient privileges to start system requirements." this is my home PC.

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

Maybe you are looking for