I am having trouble rendering cropped clips.

I am getting a "Out of Memory" error. I have the same clip overlayed on top of another, and have the top clip cropped. The bottom clip is at a lower opacity. When I try to render that section, it gives me a "Out of Memory" error. Both clips are the same - a RAW photo that is RGB at 8 bit.

You need to go to your settings and up the amount of ram used by FCP for stills.
Go to Final Cuts System Settings then in the Memory and Cache Tab bring up the Still Cache to something closer to 50%.That should be it.
Pi

Similar Messages

  • I am having trouble rendering a video in After Effects CS6

    I am having trouble rendering a video in After Effects CS6. My video is only 12 seconds long. I am using the "Ray-Trace" feature". Whenever I try to render this video I get this error message.
    Also, the text turns into a giant black boxy blob whenever I turn off the Ray-Trace effect.
    Somebody please help

    That's a question for the Adobe forums.

  • Having trouble with audio clips in FCP

    I have a project which involves using a number of short audio .wav clips stacked up with a video clip - lots of sounds to go with a SPFX-heavy project.
    Problem is - I can hear a 'popping' noise at the start of the .wav clips. In some short portions of the project this is really annoying because you can hear 2-3 pops in rapid succession as one wav file comes in after another.
    I've brought the files into Soundtrack Pro and there is no popping sound to clean up in the individual audio files.
    It anyone else having a problem like this? Is it unavoidable?

    Yes, it is a common problem with digital audio files. I believe it is known as DV Offset, or some such. You can search for POP and find many discussions here and on other FCP forums. We see the topic weekly at least. The most common solution is to place a 1 or 2 frame fade at the beginning of the clip.
    This is not necessarily a problem with FCP, it's digital audio, that's just kinda how it is.
    bogiesan

  • I am having trouble sorting out clips.

    I cannot seem to isolate a clip.  I downloaded an old movie from a vhs format.  Now, the entire movie is surrounded by the "yellow" line and I cannot seem to isolate a clip.  There is an entire section in the middle of the movie which I would like to remove, but cannot isolate it.  What am I doing wrong?  I tried to follow the instructions in Help, but it's not "helping".

    Hello lorrainefrombluffton,
    I hope you are enjoying editing with iMovie. I have located an article that may help you with editing clips:
    iMovie (2013): Trim, split, and move clips
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Trouble Rendering

    I'm using Premiere Pro CS3...and I'm having trouble rendering.  I keep getting a 'Error Compiling Movie' message.  I was wondering if it might be related to disk space but I have more than enough free space to carry the finished movie once it's rendered and I think more than enough to handle the rendering process unless it needs way more slack than I realize. 
    Any thoughts, anybody?
    Thanks

    The error message itself doesn't have any number or anything specific attached to it, it a pretty generic message that literally just says 'error compiling movie,' it also seems to occur pretty early on in the render, it's not like the render is nearly finished and then it craps out.  The movie I'm attempting to render is roughly 20 minutes long and I'm trying to render it as a quicktime movie with mpeg-4 compression.  The footage is also animated if that makes a difference.
    My computer has 164gigs of free diskspace and is running windowsXP(didn't like vista, haven't gotten around to 7 yet).  I should also say that this isn't my first rodeo...I'm an animator and use premiere a lot to edit my work.  I don't claim to be an expert but I've always been able to make it work for my purposes and have rendered out tons of movies...including several much bigger than the one I'm working on here, on the same computer.  I don't recall ever encountered this problem before...I think maybe once I had some sort of similar problem but I was able to resolve it by creating a new project and importing the original project to the timeline...so in that instance it seemed like it was most likely a glitch of some kind...which I was hoping was the case with this one but that same solution hasn't worked this go around.

  • I am having trouble dragging a video clip from iPhoto to iMovie.

    I am having trouble dragging a dropping a video clip from IPhoto to IMovie.  Has anyone done this?  Is this even possible?

    I had this problem too, and I don't think it is possible; I'm pretty sure the only videos you can put on iMovie are ones you record with the built in camera on the computer, or a video camera.

  • Having trouble importing a movie clip in iM9

    I am having trouble getting a video clip I made into iMovie 9.
    I recorded this video clip on my Android cellphone.   When I uploaded it into my computer, it came up on my desktop with the tag .mp4.  I found that I could not select it for importing into iMovie, and suspected that iMovie doesn't like the .mp4 tag.  So I opened up QuickTime and converted the clip into a movie with the .mov tag.  The new converted movie's thumnail correctly showed up on my desktop. 
    I then opened up iMovie and opened up my project, complete with the Event Library open.  I did File>Import>Movies and choose my clip.   I got the normal visual and aural indications of a successful import, but the clip did not show up in my project.  In fact it did not show up anywhere in iMovie.  
    I'm wondering what I need to to do find this clip or at least do something else so that I can put it into my project.   Thanks!

    More info:  I pulled up Finder>Movies>iMovie Events>My Project>iMovie Cache> and my clip was there in fine fettle. 
    But I still can't find a way to get it to appear in my project's Event Library, which is what it should do, once I've imported it.  (I believe.)

  • Having trouble figuring out how to save the original photo after I've cropped it - i.e. I want to create a headshot of my husband from a photo of the two of us, but I also want to keep the original. Seems very basic, but can't seem to figure it out. Any h

    Having trouble figuring out how to save the original photo after I've cropped it - i.e. I want to create a headshot of my husband from a photo of the two of us, but I also want to keep the original. Seems very basic, but can't seem to figure it out. Any help would be great!

    Use File >> Save As
    Choose a different file name so as not to overwrite the original and don't save any changes when closing the original.

  • I am having trouble getting sound on video clips I have imported into Premiere Elements 10.

    I am having trouble getting sound when importing video clips into Premiere Elements 10.  Is someone able to offer me a solution as I have no idea what I have done to cause this to happen. 
    The clip has sound when opened with windows media player.
    Thank you

    Hi Steve,
    After reading everybody’s responses I am feeling a little out of my depth.  Being new to this I am having difficulty in understanding a lot of the information given to me and also in the information you require from me.  It appears that one thing I should never do is mix film from two different cameras.  I would really like to fix this one particular clip though as it holds an interview that was taken when leaving Coober Pedy and something that I don’t want to lose.
    I have today done some research on the camera that took the offending video clip.   It was a Samsung S85 and according to the Samsung website it uses MJPEG video format.
    Here are the specifications as per the Samsung website.
    Camera Type
    Ultra-Compact Point-and-shoot Digital Camera
    Image Quality
    Image Sensor
    1/2.5" 8.3 Megapixel CCD
    Effective Resolution
    8.2 million pixels
    Color Depth
    24-Bit RGB
    Color Modes
    Normal, B/W, Sepia, Negative, Red, Green, Blue, Custom Color
    Image File Formats
    JPEG (Super Fine, Fine, Normal)
    Recorded Resolution
    8M (3264 x 2448)
    7M (3264 x 2176) - 3:2
    6M (3264 x 1824) - Wide
    5M (2592 x 1944)
    3M (2048 x 1536)
    1M (1024 x 768)
    Video Recording
    AVI Motion JPEG with Audio
    640 x 480 @ 30 or 15 fps
    320 x 240 @ 30 or 15 fps
    Clip length limited only by available memory
    5x optical zoom available during video record
    Audio Recording
    WAV format (monaural)
    I downloaded and installed Media Info and Morgan Multimedia MJPEG Codec V3.99.108 today.  Do I have to register it to get it to operate?  I read the documentation file that came with it hoping to find a clue as what I should do but I could not comprehend the information it contained.
    Thank you and other members who have responded to my plea for all the help you have given me.
    Judy

  • Warp stabilizer crops clip off screen - help!

    Adobe Premiere Pro CC - most current update.
    When I apply the Warp Stabilizer effect, it crops/moves the clip almost completely off screen in the preview window. It also remains this way when I export.
    I am uploading dslr footage with these properties:
    File Path: /Users/Braedin/Desktop/Banff trip/Friday/MVI_9850.MOV
    Type: MPEG Movie
    File Size: 52.5 MB
    Image Size: 1280 x 720
    Frame Rate: 59.94
    Source Audio Format: 48000 Hz - 16 bit - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Total Duration: 00:00:10:03
    Pixel Aspect Ratio: 1.0
    I then slow down footage to 40% to a 24fps look (orginally 60fps)
    I then "Nest" the footage to be able to apply the Warp Stabilizer effect.
    This is what it looks like without applying warp stabilizer:
    This is what is looks like after applying warp stabilizer and rendering the clip:
    These are the properties of the "Nested" clip with Warp Stabilizer:
    Nested Sequence 03
    1280 x 720
    00;00;04;22, 59.94 fps
    48000 Hz - Stereo
    Finally, here are my current Sequence Settings in which I am having the issue:
    Any help would be greatly appreciated as I suspect its an issue with sequence setting.
    Thanks,
    Braedin

    If you have a Retina Macbook Pro you can download the latest NVIDIA drivers from their website, which will enable you to use CUDA GPU acceleration in Premiere Pro, which fixed the problem for me, and is faster to render etc than Software Only.
    More info at this link, which also contains a link to the NVIDIA drivers:
    Enabling CUDA for Premiere Pro and After Effects in the MacBook Pro Retina

  • Having trouble importing select pictures from a cd to my iphoto library

    I am having trouble importing (and viewing) my vacation photos from a cd to my iphoto library. Some of the photos I can view in finder, but when i click on the rest, I get a message that says "Item xxxx.jpg is used by mac os x and cannot be opened". When I tried to import the photos to my library... the ones I could view imported no problem, the ones I couldn't view will not import and I get a message saying "unreadable files: the following files could not be imported (they may be an unrecognized file type or the files may not contain valid data)". I am just sick that I cannot find these photos!!! =( especially since I had them on iphoto before I cleaned out my computer (so I've had them in my library before). Any ideas? I am in desperate need of help! =(
    P.S. When I try to move the pictures to my desktop, I get a notice that says, "you may need to enter the name and pasword for the administrator on this computer to change the item named xxxx.jpg"... when I click continue, another message pops up and says, "the item xxx.jpg contains one or more busy items that cannot be changed"

    Welcome to the Apple Discussions. What do you have set in the System/CDs and DVDs preferences to do when a disk is inserted? If the option is not set to the Finder do so and see if that will make any difference.
    Otherwise boot into Safe Mode and see if you can copy the files from the CD to a folder on the Desktop. Boot back into your normal account and see if you can import. Or import while still in the Safe Mode.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    MBP 2.16Ghz; G5 Dual Core 2GHz, 2G RAM ea, 250G HD; G4 Dual 1Ghz, 1.5G RAM;   Mac OS X (10.4.10)   22" LCD, 710G FW HDs, Canon: SD700IS/i850/LIDE 50, Epson R200, 30G iPod, 2G Nano

  • White space/stripes in between cropped clips

    Hi there,
    I have shot a video of an rotating object in a photo studio (see example below) on which the cardboard sides are visible.
    My goal is to stretch the background on both sides of the rotating object to get rid of the cardboard and create an infinite studio.
    So;
    - I created 2 copies of the original footage
    - I cropped the first copy from the left side of the object to the left screen
    - I cropped the second copy from the right side of the object to the right side of the screen
    - I scaled both copies in width to the point where the cardboard disappeared out of the screen
    - Finally I created a little overlap of both copies with the original so there was no gap between the left and right side
    - Voila, I created a infinite studio
    Here is the problem; reviewing the file in Adobe Premiere everything looks perfect. But the rendered file shows two white stripes in the middle of the screen (on the edges of the cropped clips).
    I have no idea how to fix this.
    Can you help me?
    Smile, Tom

    Thank you for your replies! I am not very experienced when it comes to Adobe Premiere Pro, but thanks to your help I solved the problem!
    @Richard M Knight
    I am completely new to using linear wipe and masks. But due to the tutorials I found (which where based on transitions between clips) I am a bit wiser now.
    Thank you. I have also looked at the waveform monitor, and though I think I've seen the "spikes" you where talking about, I have to admit that it looked like complete abracadabra to me!
    @Ann Bens
    Thank you, your solution makes sense. But the footage I've shot has a flicker in it which makes the background color change from grey to wh
    What I did:
    I kept all the layers and used Featered Crop from Creative Impatience to feather the overlaping parts of the layers. The rendered file had no stripes and looked perfect!
    Again, thank you all for taking the time to help me!
    Smile, Tom

  • This happens when I rendered a clip and switched to QT player (leaving AE running).  After closing Q

    Hi
    There are a few issues with the latest update of After Effects CC (I upated yesterday).
    One which I never had before is the following error message:
    After Effects error: Error (4) reading frame from file "Volume/MAC_DATA/sterne/Test.mov". ( 86 ::2 )
    Of course I tried different drives, copied the file etc.
    This happens when I rendered a clip and switched to QT player (leaving AE running).
    After closing QT player I have the error in AE.
    Anybody experiancing similiar problems?
    Regards,
    Uli

    Hi Todd
    The problem is back!
    Today I have been working for about 8 hours on stabilization using mocha AE.
    The problem came back when I wanted to render a layer. The same error message as described above.
    On the ohter hand when I am switiching to mocha AE I am loosing my AJA preview in AE.
    The preview was set up correctly in "preview-settings" and was working perfectly fine.
    When I switch back to AE I see in the settings that "computer only" is the only available choice. Nothing else anymore.
    Restarting AE gives all "preview-settings" back.
    I already worked a lot like this with AE CS6 and never had these kinds of trouble.
    About loosing connections. E.g. the first time I started AE CC there was no audio at all. Even the meteres did not show anything.
    In the audio hardware settings I had to swicht to anything and back to "system". Only then the sound was available.
    Everytime you delete the AE preferences you have to do that again.
    And now after I restarted AE it wom't even read my files anymore:
    After Effects error: File"593_0128.mov" cannot be opened, it may be in an unsupported format (86 ::1).
    The movie is a DNxHD 185x from Avid and opened without any problems before.
    It looks to me similar to the other problem I have.
    Regards,
    Uli

  • How do I cancel the distance between the numbers? I'm having trouble copy phone numbers from the phone book and send it via SMS This problem I've found in the Arabic language, numbers appear in reverse Please help System 6.0.1

    How do I cancel the distance between the numbers?
    I'm having trouble copy phone numbers from the phone book and send it via SMS
    This problem I've found in the Arabic language, numbers appear in reverse
    Please help
    System 6.0.1

    MPEG-4 should not be used in FCP unless it is converted first or optimized in the application.
    Trash your preferences. Trash your project render files. Switch off background rendering. Do not re-render. Export your projects.
    Ignore the last frame and first frame indicators.

  • I'm having trouble installing adobe flash player on my Kindle HD

    Hi my name is Derek in I'm having trouble installing adobe flash player for Kindle HD could you please help me.

    Dj5263 wrote:
    Hi my name is Derek in I'm having trouble installing adobe flash player for Kindle HD could you please help me.
    You'll continue to have trouble, because...
    There is no more Flash Player for Android and there won't be another. Android is no longer compatible with Flash Player. Playing Flash content is very processor consumptive and it drains your battery, also shortening the life of it. Android (Google) recommends using either "Dolphin" or "Puffin" as your browser if you need to view Flash content with a mobile device running Android. They're both free in the GooglePlay store.
    These browsers use "server side" rendering to reduce the load on your device.

Maybe you are looking for