I am having trouble setting up up an ePrint account - have email/code but no password

I have an HP 6700 printer and an old Mac that is too old to support the printer.  I am now trying to set up and iPrint account.  I went through the steps on my new printer and got my printer code or email address.  What I don't have is a password for this account.  I tried to create an new account and it asks for the email address and the password.  Since I don't have one I can't go any further.  
I used to have an HP account a few years ago but the email associated with that account was hacked and closed.  
How can I set up a new password and ePrint account?  My code is only going to be valid for another 23 hours and I will probably need to get a new one if I don't figure this out.  
thanks for you help!

Hi
You can go ahead and visit the link given below and follow the steps given it to retrive the password and eprintercenter email id.
http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02940150&cc=us&dlc=en&lc=en&product=5058338&tmp​...
Regards
Aneesh
I Represent HP
You can say THANKS by clicking the KUDOS STAR. If  my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!...

Similar Messages

  • I'm having trouble sinning in to my eprint account. I get two things when I try to sign in.

    1. photo smart eStn C510a
    2. windows vista 32-bit
    3. JavaScript:void(0)  and   Ajax Submit Failed erro = 403, fobidden
    4. N0
    5. I'm getting the folowing messages:
               1. JavaScript Failed: void (0)
               2. Ajax submit failed  Erro:403, Fobidden
               3. This happens when I try to sing in to my account
    6 My email is [email protected]

    Hi there, try signing into the account using a different browser i.e. if you use IE try Mozilla FF or Google Chrome. This has worked for other users who've experienced this issue.
    Hope this help but post back if you're still having trouble. Good luck.
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • I am having trouble setting up my time capsule...it connects but does not read my ethernet internet connection...linksys works fine...help please.

    Can anyone assist?  I thought it would be a very easy setup...jd

    Tim@Merced wrote:
    I have the same issue.  I spent 45 min on the phone with cable company internet tech, he could not figure it out.  He was able to see the TC receive an IP address, but I was not able to access the internet, even though I had a green light on TC and my wireless network was working.  I thinks it is an Apple issue. I removed my new TC, reconnected my Netgear wireless and eveything is back to normal.
    I hope Apple or someone has an answer.
    Same response to you.. test by ethernet if you haven't already.. and your arrangement is not too difficult.
    I am guessing you got into the TC to set it up? How?
    If the computer does not receive the correct gateway and dns address you will be able to get access to the TC but not the internet. Check the network settings. Compare what you get when connected via the Netgear which is working with the TC which is not working.
    You might be able to get around it by manually setting IP address.
    Please make sure you have cable modem plugged into WAN port.. Apple's label is not exactly clear.  but the WAN port is slightly separate from the others. And has a different symbol.
    I also bet you have Lion on the computer.

  • I'm having trouble setting up my Google Apps for Education email address in the mail app

    I have tried several times and different ways to add my .edu email account to the iOs system through the mail app on both my mac and my iphone. It is run through Google apps for education, so it uses gmail as a platform but is addressed as my school's title. On a few occasions it wouldn't accept it to add, on others it connected but wouldn't access the email account once it was added.

    The approaches available may differ depending upon which operating system you have.  I am running OS 10.8.4 and on my computer, the following works:
    Go to System Preferences and select Mail, Contacts, & Calendars.
    From the right, choose Gmail; this should open an dialogue box, where you should enter:
    Your name (as you wish it to appear)
    Email address (should include the @whatever.edu, where whatever is the appropriate university extension--it should be .edu, not gmail.com)
    The password on the account.
    Choose the applications you want to sync with your computer and click Add Account. You will probably get an error about Mail Server Discovery, but click Continue anyway.
    Launch your Mail application and it should have you setup your account. Choose/enter the following:
    Account type: IMAP
    Title Description: (put whatever you want the account titled, it's up to you)
    Incoming Mail Server: type in imap.gmail.com
    User Name: put your full email username, including the @whatever.edu
    Password: put your email password again
    Configure the outgoing mail server with:
    Description: whatever you want it called
    Outgoing Mail server: type in smtp.gmail.com
    Check the option Use Authentication
    Username: type your full username, including the @whatever.edu
    Enter your password and click Continue and then Create.
    That should be it.

  • Is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

    is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

    Install this to get X11 functionality back in 10.8
    http://xquartz.macosforge.org/landing/
    Worked great for me and others.
    Jerry

  • Having trouble setting up my website. It's probably a silly mistake.

    So I've registered a domain and hosting plan with A Simple Orange which had a pretty good deal since I had a coupon for 20% off. I've tried using Joomla to manage my website, but I couldn't get the hang of it. So I'm trying out iWeb 09' now and just having trouble setting it up. I've gone to me.com and added my website and added the CNAME correctly I hope. Here is a picture. http://imgur.com/XI8Lw.png
    Next I opened iWeb and setup MobileMe in the preferences panel. I've tried publishing the information from iWeb to my website, but my home page doesn't change. You can see here at RyanSchefer.com that it's just plan

    No. Your CNAME setting is not correct. The CNAME and web.me.com are correct with web.me.com being your host. However, your domain name is incorrect - don't understand why you have put mobileme before it? You just enter either your domain name on its own so domain.com or you need to set up two separate CNAME entries, one being for www, CNAME, web.me.com and then one being @, CNAME, web.me.com. The @ stands for your domain name and the www is your sub domain.
    Try altering this and it should work okay.

  • Having trouble setting up email accounts in the mail app?

    Hi Apple community,
         I am having trouble setting up my email accounts with the osX mail application. I have two accounts, an outlook and my college email through google. When I try to add the outlook account the prompt says that it cannot connect to the server and when I try my college mail i get the following prompt.
    "Trying to log in to the Exchange server “autodiscover-s.outlook.com” failed. Make sure the email address and password you entered are correct, then click Continue."
    Please note that my college account is run by gmail and ends in murraystate.edu
    Thanks, Will.

    Hey will,
    okay for your college email. Heres what you do.
    Try adding your email and wait for the message to come up
    Trying to log in to the Exchange server “autodiscover-s.outlook.com” failed. Make sure the email address and password you entered are correct, then click Continue."
    Once it does, you will notice 2 extra boxes One says username and the other password. You will notice that the username will not have @murraystate.edu
    Add this and continue and this should now be added as an email account and should be able to receive emails as normal.
    For your outlook emails, I would recommend using the following article to set it up. It is fairly straightforward.
    http://howto.cnet.com/8301-11310_39-57602775-285/how-to-set-up-mac-mail-to-use-i map-for-outlook.com/
    Hope that helps.

  • Having trouble setting up FaceTime.   keep giving me Apple ID password

    having trouble setting up FaceTime.  trouble at verifying use I'd.  I have my email setup with different password since I have tw setup email.   my Apple ID has different password.   same email name.

    Hello sangjaimepark,
    Thank you for the details of the issue you are experiencing with activating FaceTime.  I recommend reviewing the article below for FaceTime activation issues.  When trying to activate FaceTime, you will need to use the email address you use for your Apple ID and your Apple ID password and not your email password:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Having trouble setting up network

    Hi guys,
    I just recently moved to a new house and am having trouble setting up the network with my airport extreme. There is a cable modem that is networked to the house so that every room has an outlet.
    I connected the airport to one of the outlets with my macbook and when I create network, I cannot connect to the internet wirelessly even though the macbook detects a network when I set it up with bridge mode. But hard wired through the router I can surf the web as I am doing right now.
    When I hit share an IP address, the internet does not work at all. It seems to work fine with my old netgear router, but would prefer using the airport.
    I've also reset the airport as well with still no luck. Any help would be appreciated. Thanks

    Have you tried powering down the modem for 5 min and then turning on with the ethernet connected to the WAN port of airport extreme?

  • Having trouble setting up e-mail on new iPhone 4s. I would like to sync with my outlook mail, contacts

    I am having trouble setting up my email and syncing my outlook calendar wiht my new iphone 4s.

    How do you connect to the internet?
    Most of the time, the problem lies here. You can try a couple of things. First, try only 3G or carrier data. Then, try only wifi. If that still doesn't work, your only other option is to try a different hotspot.
    I had the same problem before when I updated to iOS 4.3. I thought it was the update at first. I usually have the carrier data turned off because my plan doesn't have an unlimited provision for it. I forgot that I also switched ISPs from DSL to a visibility unit package - meaning I had to setup my laptop so that I could get wifi from it. I realized this when I visited a friends house that I knew I could connect properly before.
    My problem was with my laptop. It seems that Little Snitch blocks the ports being used for mail and push notifications. I haven't figured it out exactly since I still can't get email when I'm using my laptop connection. But, it works fine when I'm using ONLY 3G or both/wifi only if connected to a different hotspot.
    Hope that helps.

  • Having trouble setting up a linksys WRT54GS router with v...

    Having trouble setting up a linksys WRT54GS router with verizon DSL using a westell 6100F modem. the modem works fine by its self  but the router will not connect  to the internet when installed like the cd tells you to.
    online help and phone help has been less than helpful,  anyone have any Ideas?

    Ok I found " Installing the liksys wireless router with a westell 6100 modem" in the verizon troubleshooting guides. printed the instructions so I would'nt forget. step 1 open your web browser and enter http://192.168.1.1 in the address field.  PROBLEM it comes up with a login screen that I don't know how to sign into. tried the obvious stuff. cannot get past the login screen. I knew this sounded to easy to be true. anyone have any ideas? 

  • MSI X58 Pro - I'm having trouble setting up my first Raid 0 Array

    Hey guys!  I have an i7 920, X58 Pro, 3x2GB DDR3, Radeon 5850, 640GB WD Black (Windows 7 64 bit + applications) and 1TB Samsung F3 (backup) system and I'm having trouble setting up a raid 0 array.  I recently decided to purchase two additional 1TB Samsung F3 harddrives in order to create a raid 0 array, while still keeping my original two harddrives separate.  I installed the new harddrives today, installed the JMicron drivers that were on the drivers disk that came with my motherboard, went into the bios, and changed it from IDE to RAID.  I then went into the raid bios, selected the two new harddrives and selected raid 0, saved everything and tried to load Windows and Windows refuses to boot up.  I got an option to try fixing Windows but that didn't end up fixing anything.  Finally, I was forced to go back into the bios and switch it from RAID back to IDE just to get Windows to boot up again.  Does anyone know what I need to do in order to get this raid 0 to work?  Thanks a lot in advance for your help!

    Perhaps create a software RAID? You can do it in Windows through Control Panel --> Administrative Tools --> Computer Management --> Disk Management.
    A quick guide: http://www.softwaresecretweapons.com/jspwiki/windows-7-software-raid-disk-partition-and-volume-context-menus

  • I just got a new ipad 2 but I having trouble setting it up, can someone help me. thank yoy

    I just got a new ipad 2 but I'm having trouble setting it up, can someone help me?

    Please read Chapter 2.
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • I'm having trouble setting up my new 5s. it won't connect to phone service and my old phone is still getting all my messages

    i'm having trouble setting up my new 5s. it won't connect to phone service and my old phone is still getting all my messages

    According to http://en.wikipedia.org/wiki/IPhone_5
    the iPhone5 has 1GB of RAM, and internal storage of 16, 32, or 64GB.
    It does not use SD cards.
    Fake iphones are really Android phones using the skin of iOS6.
    Click on the App Store icon. If it takes you to Apple's App Store, then it's a real iPhone.
    But if you are directed to Google Play, then I'm afraid you've gotten a copy.

  • HT201250 I am having trouble setting up my time capsule.  the amber light is flashing.  i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function.  I just want the Time Capsule to ba

    I am having trouble setting up my time capsule.  the amber light is flashing.  i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function.  I just want the Time Capsule to back up.

    Simple.. bridge the TC.. in the apple utility in the NAT and DHCP area.
    Plug it into the FIOS router.. you can turn off wireless in the TC if you want.. or use it.. it can work faster if you are nearby and can select 5ghz.. but up to you.

Maybe you are looking for

  • Field  and Table name for purchaser

    I want to know the field and table name for purchaser id and purchaser name. Plz help me.

  • Applying Boris Title Crawl

    Hello, I'm having a heck of a time getting the scrolling title/credits, that I finally figured out to do in Boris, but am missing a step that's not putting it into the timeline. To start, I clicked on the title icon in the lower right-hand side of th

  • How to get application module instance from java bundle?

    Hi! I would like to build an application that would get all translations from a database table. So I created application module for translations that contains a view object which is selecting translations for specific language from a database table.

  • Discoverer 11g Workbook Fails With Single row subquery returns more than 1

    All - We are using discoverer-11g workbook using EBS 12.1.3 integration We are seeing below error message only for few users on all workbooks in discoverer. ORA-01427 Single row subquery returns more than one row EBS Version : 12.1.3 Discoverer Versi

  • Photoshop CS 3 error message?

    I tried googling this error message and came up empty.  Anyone seen it? (first one).  Thought Id ask about the others as well. thank you in advance! - Adobe Photoshop CS3[613]    failed to send request 0: -1 - [0x0-0x3d03d].com.adobe.Photoshop[613]