I am having trouble with CSS. Displays right in DW but not in web browser

Hello,
I am having difficultiy getting my webpage to look the way it does in Dreamweaver in a browers (All 5 of them). My problems are with:
- Title Heading Content
- Sidebar
I have two lines in my heading with the name of the organization. I made two rules. Header H1 and a sub header. For some reason while previewing them in a browser there is a gap between the two words. But in DW there is not. I do not want the gaps. How can I fix it?
In a browser the side bar does not come all the way down. There is a small gap between it and the footer. Like the other problem this does not appear in DW only in the browers.
Any help would be appreciated! I am still learning CSS.
I believe these are the only two files you need to look at.
Thanks for the help!

Also how can you see if your ISP offers the free web server space?
Contact your internet service provider (ISP). Often this is your telephone or cable broadband provider too. If not, there are many free or very low cost remote server hosts around. Do a Google search.
I did do the validator and it told me I was fine. I did not do a CSS one though.
Good. So we know it's not an HTML error. Get the FF Web Developer Toolbar. It permits you to edit CSS in your browser to see how changes effect the layout plus a lot of other cool stuff.
Sorry I'm still new to all of this.
Don't fret, Tim. We all started in the same place. You'll catch on soon enough.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

Similar Messages

Having trouble with ibook display

Just got my 15yo son a free ibook from a friend. It seemed to have the logic board problem that these systems are prone to. It would boot up to a blank screen, get lines in it etc.. and seemed to work fine with a little pressure applied.
So he has been researching this problem, and yesterday followed instructions to take off the back and use a shim, then put the back on again. This seemed to work, or well, at least it boots up every time now.
However, it goes to a screen with a folder that flashes between a question mark and a face.
It seemed to work fine before the fix. We actually didn't use it much, thinking it might not be good for it. But you could use it just fine once you got it going.
I don't have the admin password, or the start up disc. But saw that I could buy one on ebay.
Is there a way we can fix this, or is it no good? I got the ibook so my kids could learn to use a mac. We have been thinking of switching all our household computers to mac from pc, but wanted to try it out first before investing all that money.

For the costs of troubleshooting and repairing
an older computer, and getting an OS X disc
set for it (should be included with a previously
owned computer) you could consider looking
into refurbished or repaired ones with a limited
guarantee and return policy. Some of these do
not include the boot/install discs either, though.
A computer needing work is worth significantly
less than one with a good bill of health; and
all older models with few exception are not
very expensive. In fact, repaired ones are a
fairly good deal compared to the retail cost.
One of several places online to check, to see
what a fixed one can cost (varies with options)
is http://www.wegenermedia.com/ and there are
some models worth avoiding. A good experience
with Mac OS X - especially if compared against
any other system - should be based on newer
hardware and relatively recent OS X versions.
A desktop computer can cost less than portables,
when new this is really noticable; in the Certified
Apple Store refurbished pages, you can see that
a recent model Intel-based iMac with like-new
hardware, recent OS X version, and warranty, is
a fairly good deal. A new MacBook (white) model
from the online Apple Store, is also a great deal.
Older used hardware has various limitations.
Computers over 4 years old start needing a
few repairs or replacement parts; and they
may not be adequate for a beginner to learn
the best of any operating system. And OS X
does shine quite nicely; beyond the look of it.
Some resellers of new Apple computers may
have new/old stock of recent but not the latest
models, and at less than original retail. Be care-
ful to not go just by the price numbers; see if
the latest computer at Apple Store online is of
higher specs for the same price. I see resellers
with older inventory, asking full new prices, too.
(Not all, but some do this in other retail environs.)
The iBook G3 you have is a problematic series
and by now, even the better ones would be in
a need for repair or replacement parts. A few
out there in the world of honest refurbished old
computers may be fine, if not too costly. The
better iBook is the G4 1.33GHz 12" or G4 1.42
GHz 14". And PowerBook G4s are often durable.
You can get a lot of computer value in a desktop
when looking at a new computer; the iMac Intel
models are superior and would be a fine start.
The least expensive MacBook (online store) new
is also a good value in computing at under $1k.
Good luck & happy computing!

Having trouble with Target Display (27"iMac2011)

I'm new here and hope that someone can help me.
I just bought a new MacBookPro(December 2014) 15" with Yosemite. It has a thunderbolt port and I'm trying to connect it to my iMac27" (2011) which also has a thunderbolt port. But after hooking both up with the thunderbolt cable (from Apple) and pressing Command+F2 (from my iMac27 keyboard), nothing is happening. I'm running Snow Leopard (10.6.8.) on the iMac27". Could that be the issue? I tried different things but still not getting it to connect. Please help. Thanks in advance.

Hello Wilmocat,
Target Display Mode only requires 10.6.1 or later, so it looks like you're well within specification. Depending on your settings, you may need to use the keyboard combination Command + Fn + F2 rather than Command + F2.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
Target Display Mode: Frequently Asked Questions (FAQ)
http://support.apple.com/en-us/HT3924
Cheers,
Allen

Anyone having trouble with webpages displaying only squares with capital As in them?

On some websites, such as my banking site, all that Safari displays are squares with A's n them. All the text is replaced with these squares. see the screen shot below. I am assuming/hoping I am missing some plugin or extension. Any suggestions?

You're welcome.
ASC search ... there's room for improvement

Having trouble with macbookpro display settings

Using 'best for built-in display' setting on older 15" Macbook Pro, and also have tried using all the scaled options as well... the problem is that now I have to scroll left/right/up/down to see all my desktop icons/menus/dock icons and the screen 'jumps' to show the remainder of the display window when I touch the mouse to any of the sides... I have tried using different settings in the view options window e.g., icon size, grid settings, etc.
Previously this was just fine until I had to restore some files from Time Machine... I even tried to restore the Display Preferences from a date that I knew was ok, all to no avail...
This is on a Macbook Pro 3,1 using OS 10.8.3... any thoughts?

Hi lssphx,
Resetting your computer's PRAM can resolve issues like this:
OS X Mountain Lion: Reset your computer’s PRAM
http://support.apple.com/kb/ph11243
All the best,
Jeremy

Having trouble with CSS Properties panel

copying all from a button (example). Many properties such as gradient don't always seem to be shown in the properties and therefor not carried across to the external (DW) page? What am I doing wrong? No problem modifying CSS but shouldn't it be there?
In fact if I don't put in a border to the button only the dimensions seem to be there?

The .tif file format isn't generally recommended for web use; it's intended more for print. Historically, some browsers haven't supported the format, if I recall correctly, though many of them may do so now. (Just checked Firefox and Safari, and both seem to display the format just fine.)
It could be that Dreamweaver doesn't recognize the .tif format. (I'm a little lazy to test this theory at the moment, but it seems quite likely.) Here's one rather old thread on this topic: http://forums.adobe.com/thread/26977
Incidentally, this is straying from the topic of your original post and would have been better posted as a new discussion.

Hi i am having trouble with adobe photoshop elements 10 it will not let me singh in

Hi all
I hope some one can help me i was on the phone with Adobe for a 1/2 hr and in the end they wanted money to fix a problem they had and no its my problem
I try to singh on to my acc and it comes up not avalable try again later then i try to add people to my address book so i can sent them pictures and it ask me to singh in and then it freezes my whole computa can some one help i dont have the money to pay adobe i have been out of work for 7 years i am 60 and it does not look like work will come again for me the way things are well take care and have a good day and God Bless.
Rich

when I click on my Photoshop at the beginning the welcome comes up and I do not Singh I click organize there are only two thing you can click on one organize and edit.
That is the welcome screen. You don't want to use it because it will always try to contact photoshop.com.
You are using windows, I'm guessing? Then you want to go into the program files. If you have a 64 bit version of windows it will be program files(x86) instead. Go to C:\Program Files\Adobe\Elements 10 Organizer to find the organizer .exe file (it will be called application instead of .exe in windows 7 or 8). The editor will be in C:\Program Files\Adobe\Photoshop Elements 10.

I have been through all the steps given in help to enable cookies but the site i am trying to log into still says i have to have a cookie enabled browser....i am only having trouble with this one site and it is not blocked

each time i try to log in as a member to this site i get the message that i have to have a cookie enable browser. all other sites seem to be working fine. cookies are enable, have been cleared and i have nothing blocked at all

Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Having trouble with my filters in the filter gallery not all working on the image.

Bas relief filter is not adjusting all the layers. It is applying the filter to a white screen. The underlying image does not show through. I did this successfully yesterday - can't figure out what went wrong.
The image is in RGB color, 8 bit, and I've tried to do this in both TIFF and PSD formats.
I have been creating images by opening the image and then immediately going into the bas relief filter and applying the filter. This time, when i do that, the preview image in the filter panel goes completely white. I can see very, very faintly that there is the design in there, as though the design is hidden well behind a thick layer of white. I adjust the sliders, and it doesn't help.
To make matters worse, it's doing this for a few of the filters! Some of them work just fine, and some don't!
Where I used to be able to go through the entire filter gallery and see how every filter would love on an image, now many of them just show a white screen when I try to apply them, so I know that it's not only the bas relief filter.
I have a job to turn out - so I need to figure out what I've done wrong!
Thank you very much in advance for your help!

OK - that is the problem! I can't thank you enough!!!
Another question - I have the other file that is exactly what I want to
duplicate. Is there a way that I can go into the other file and see the
color settings for foreground and background that existed prior to the
change and duplicate them?
I was working on several different files that look quite similar, as I was
adjusting the color to have lighter varations. They all started out the
same, though.
It looks like the File>Info shows the process of changes, and I would love
to know what the settings were before the changes- what the settings were
when I opened the file.
Again, I can't thank you enough!

I am having trouble with Imovie I finished my project but when i try to play it it says "source clip is missing" Help!

it says "source clip is missing" Help!

Hi
Did You move or alter any folder named
• iMovie Event's - or
• iMovie Project's
on DeskTop/Finder - if so - You must not do that - try to put all back
Did You in iMove trash any Event's - then don't - try to get them back by looking in trash-basket on DESKTOP. Move them out and back into iMovie Event's.
This problem might be due to the idea that there is a copy/movie in the Project - it's not !
You are using a NON-Destructive Video Editing program (all behaves in this way) and that means that PROJECT's are only a small text document pointing to What material You want to use, Where it is located e.g. in iMovie Event's - and how it's meant to be played.
If You move or delete any of the raw material - the Project will point to an empty space = Can Not be played.
WILDLY GUESSING - PLEASE no Offence ! (I've been here and done this - so I guess in this way)
Yours Bengt W

I am having trouble with the preview of songs on itunes it will not play the 1:30 preview

I am having trouble with the preview of songs,I am not getting the full 1:30 preview of the music

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
ipconfig /flushdns
Hit "ENTER" key
Restart your computer.
Now try your preview music again.

Having Trouble With E-mails That Involve Animation

This is too weird. When I receive an e-mail that has animation in it it comes through freeze framed in Mail. It does not matter if it is in my .Mac account or Verizon account. Just for the heck of it I forwarded it to myself using the Verizon account and opened it in Safari. I also did the same thing with my .mac account. I opened it on the web. Bingo, I had animation. I am also having trouble with WMV's. Why can I not get any animation in Mail? Is there something I am doing wrong? any way to correct this?

OK, from the sound of your post, you have a limited knowledge about email. Let me see if I can help. I would guess that you have a Windows machine that you have used in the past. Your email address must be a "pop" address. That means that your internet service provider has a server where your mail is sent. This is different than a web mail address, that is accessed remotely with a web browser, such as Internet Explorer, Firefox, or Safari. You must then be using an email program, such as Outlook Express, to go get the email onto your local machine. Any email program can do this. Open up the accounts tab in Outlook Express, and write down the settings. There will be one for the incoming server, and one for the outgoing server. Now, on your Mac, you can use the email program provided, such as Mac Mail, and put the settings in there. You can now send and receive to your Mac using your supplied email address. You can use another program such as Thunderbird to do this if you want. You don't have to use Mac Mail.
Getting your old email off of the Windows computer is a bit harder, so hopefully you don't need to do that. But if you do, I can direct you on how to do that also.

I am having trouble with my adobe reader

I am having trouble with my adobe reader. I am not able to access my report I am supposed to be working on that is time sensitive. I have had tech support for 2 days trying to trouble shoot. They have done all they can do and told me to call Adobe. I cannot find an number anywhere.

Look on the "Contacts" page.
But you may get quicker help if you describe your problem (with all the details) here.

Is anyone having trouble with email via iCloud?

Is anyone having trouble with email via iCloud? I'm not getting it on any of my devices, iPhone, Mac ... even the iCloud website.

yes! just loaded mountain lion yesterday beacuse my mail server was acting up and i thought it would help. now its worse, apple mail is giving me error messages, cant connect to server. i can get emails but can not send out. everytime i open the program it takes a VERY long time to load. thanks apple, great job!

I am having trouble with the initial connection. I have isolated the problem to the cable/ connection. My new hdmi cable has a resolution up to 1080p...does the resolution matter?is this the right hdmi cable for the apple tv?

I am having trouble with the initial connection of the apple tv. I have isolated the problem to the cable/connection. My new hdmi cable has a resolution up to 1080p...does the resolution matter?is this the right hdmi cable for the apple tv?

There are only two types of HDMI cables (standard and high speed - listen to all 1.2, 1.3 etc etc nonsense they will try to tell in the store) both types will work with the Apple TV.
The cable may be faulty though, have you got another to try, what exactly is happening.

I am having trouble with CSS. Displays right in DW but not in web browser

Similar Messages

Maybe you are looking for