I am having trouble with input device and Presonus Studiolive mixer.

Trying to integrate a Presonus Studiolive 16.4.2 mixer/interface into Logic Pro 8.
All the tutorials I've found/watched/read illustrate a window under audio preferences and the user switching the input device (or output device) to the Firestudio Mixer or something along those lines. This was a feature updated in Logic 9, and so my audio preferences are a little different. I still have an input device but not output and when I bring down the menu my only two options are "built-in device" and "built-in microphone" and the mixer isn't showing up. I am wondering if it's possible to integrate it this way? Is there perhaps an order to starting them up? Or is it even possible to use it with this version of Logic? Universal control is installed and operating (responding on screen to stimuli on physical mixer); running osx 10.6.8

Yes, just checked the Presonus release notes for Universal Control 1.7.2 (the latest), and it has removed support for Snow Leopard (OSX10.6.8), so that may be a possible source of the problem - might be worth contacting Presonus Tech support to confirm.
You could update your OSX, but I'd be a bit careful there - not sure if Mavericks supports Logic 8.  If not, I believe there are places where you can still get hold of Mountain Lion (which is supported by UC1.7.2) - a quick net search should do the trick.
Also, I've just re-read your post and notice you ask about the start up order.  The Presonus manual says to switch the desk on first, then fire up the computer.  This used to work with me, but I've recently updated to a new Macbook Pro and had to start using a firewire to thunderbolt connector, and I found that I could now only get the Studiolive to show up in Logic if I start the computer first, then fire up the desk then open Logic.  I raised a tech support ticket with Presonus and they were baffled by this, and couldn't see any reason why it should be, but nonetheless, it's the only way it'll work for me, so probably worth giving it a shot.

Similar Messages

  • Having trouble with wav files and sample rates

    Hi ,I am having trouble with wav files and sample rates .I have been sent multiple projects on wav as the main instrumental ; I wish to record in 48.000kHz .Now comes the problem.When I try to change the project to 48k It seems to pitch up the track.I can't have them send the logic/project file as most have outboard synths,different plug ins etc.This particular case the producer has recorded the synth task in 41.000 kHz .My successful outcome would be to be able t create a project file in 48 kHz .And NOT pitch up whne I add the instrumenta wav file .Any help would be gratefully recieved,this is my first post so any mistakes I may have made go easy 

    You'll have to convert the actual synth audio file file that the producer gave you to 48kHz. You can do this in the audio Bin in Logic.

  • I'm having trouble with iTunes synching and accessing the iTunes store.

    I'm having trouble with iTunes synching and accessing the iTunes store.   When synching, the process tops at the back up stage, freezes and I can't close the iTunes window, need to ctrl alt del.   When trying to access the store, the progress bar stops halfway.   I've googled heaps and tried most of the standard answers - unistall, reinstall, etc, now looking for some help please.
    This has only started a few weeks back, after working smoothly for the 2 years of owning the iPhone 3gs.
    Any suggestions will be appreciated, it's getting realy frustrating.
    Cheers for now,
    Marty

    http://support.apple.com/kb/HT1923?viewlocale=en_US
    this worked perfectly for me, with no loss of library! BUT was warned about uninstalling things in the order listed...FYI.

  • Edge Animation having troubles with iOS devices within Muse Site

    Hi All! I've been creating a mobile version of my website www.rinkdesigns.com and have it all complete. I created an animation/navigation bar within Adobe Edge Animate and imported it into Muse. It functions AMAZINGLY on my Nexus 4 (Android) in Chrome but on a buddies iPhone 5 Chrome only loads about 3/4 of the animation/nav bar, in Safari the animation does not load at all and half of the page background does not load either. Please check out the preview site here http://rinkdesignsmobile.businesscatalyst.com/phone
    Has anyone else been having animation/mobile troubles with iOS devices? Any hints as to how you fixed your errors would be extremely helpful! I also posted this question in the Muse forum and haven't gotten a response...
    Thanks,
    John

    Or, how about this:
    Does anyone know how to have Edge Animate objects that utilize "_top" in an open url trigger make the Muse site that they are a part of open a new window/tab with that action (as opposed to having it open the url in the current page, or using "_blank" in the trigger)?

  • I am having trouble with my FaceTime and imessage?

    I Am having trouble with my FaceTime. When I try to FaceTime some one I am getting no ringing and then I get a message saying lost connection try again. It has been like this since yesterday. I also tried to send a iMessage and it did not go. This is all new to me, has anyone had the same problem? Please help. Thank you.

    Turn FaceTime off in Settings>FaceTime>Off. Reboot your iPad. Turn FaceTime on again and see if it will work.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Having trouble with freezing starting and stoping while syncing to i-pod

    Having trouble with itunes freezing while syncing to i-pod

    I have a Macbook with Tiger, and OS x 10.4.  I had to install a new hard drive.
    Run Disk Utility   /Applications/Utilities
    First, go to your Apple menu then click Software Update...
    If no updates are available, check the startup disk using Disk Utility.
    Using Disk Utility to verify or repair disks

  • TS2972 having trouble with ring tone and or ring back tones...i followed all directions and cant access ring tone from my play list.

    having trouble with ringtone and ringback tones ..i followed all directions for home sharing.  does anyone have a real solution???

    Hello sairdoor123
    From what I understand the issue seems to be with the hardware, obviously since the phone was dropped that could cause undesired results.
    If all your data is backed up to a computer then I would recommend doing a hard reset: http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887
    If a hard reset is done then I would caution you with the following choices:  ( Should I have the audio circuit repaired as suggested by one of the repair guys? Or would that be risky?) - I would say this is risky because the person repairing the devise could easily sodder the wrong part of the hardware.
    If you really do think repairing the circuit board is more cost effective then I would recommend researching all your possible repair shops before doing any work. Make sure they have the credentials and experiences.
    Hopefully things work out for you.
    Post relates to: Centro (Sprint)
    Post relates to: Centro (Sprint)

  • Anyone having trouble with this phone and their in car bluetooth?  Calls dropping not recognizing the device.  Had the car bluetooth reset at dealer. They said it is a common problem with the iPhone?

    Bluetooth in car is not recognizing my device and when it does it will only stay connected about 5 minutes.   Blue tooth has been reset at the dealer. They said it is very common with the iPhone? The car is a 2014 Toyota Highlander.  This is very very frustrating as I have a 45 minute commute to work and do not want to have to hold my phone.... Thank you for any help.

    sstaylor2001 wrote:
    I have already done all of that.  It still doesn't work. My husband has the same phone and a 2013 toyota and his is fine. Toyota told me it is the brand new cars and the new apple update.  Need to figure something out.  This phkne is useless now and I've had a iPhone for 5 years
    Wow you would think the newer car is just an updated version of what your husbands has.
    I wonder if your husbands car was updated to the same connect system if his would not connect?
    Does your husbands phone work because he does not have the new iOS from Apple?
    Can he hook to your connect system in the car?

  • HT1689 I am having trouble with my appleid and password. I have changed to a new id and password, however whenever I updat an app it continues to give me my old applid and i  do not have a password for this account because it no longer exists

    I am having trouble   getting my updates on my apps. The email address no longer exists. I have set up a new appleid and password. However my old email address keeps showing up and I do not know the password. Can anyone help me?

    Items are permanantly associated with a single AppleID used at the time of the purchase.
    You will have to contact Apple about the non-working e-mail and forgotten password.  It's kind of like going to the police and saying you know that red car in the corner of the parking lot is yours but you don't have the papers for it and you have lost the key to the door.
    http://www.apple.com/contact/ - many contact options, including web site feedback and legal.
    Apple ID Support - http://www.apple.com/support/appleid/  -> Apple ID FAQ -->
    I no longer have an email address that was also my Apple ID. Can I still use the email address as my Apple ID?
    Apple recommends you change your Apple ID to your current, working email address. This will not create another Apple ID, it will only change it to your working email address. See How to change the name you use for your Apple ID if you'd like more information.

  • Trouble with Multiple devices and Ical

    I have one itunes account that is shared with a myself and my kids ipod. I have created a calendar for each kid and their activities. I was trying to share this calendar only with the specific ipod, which seems to work. the issue is they are still getting reminders for the other calendars not selected on their device. Is there a way to stop this and is there  way to only share the one calendar with them?

    Hello and thanks again. We're getting there.
    If I use AP Utility to set up two different wireless networks, can I name them differently? The reason I ask is the I use two C Crane wifi radios to listen to stations. They need to Log On to a netwrok that has b or g -- not n. For example, to establish a network for the C Crane radios to use, I could call it "Ronald b/g" and for a different wireless network for the Macs to use, I could call it "Ronald n" Does it sound like this would work?
    Now to some separate questions. One AE is set up to "join a network" and iTunes is checked for it to work with iTunes at the home surround sound. Could it join the n network, since the unit is a new one?
    The other AE unit is one that I'd like to "extend my network" to make the signal stronger downstairs. I suppose it would "extend" the n network?
    Finally, the two CCrane radios can log on to the b/g network and hope the signal is strong enough. Is there a device that will make the signal strength of the b/g network stronger? I wouldn't mind purchasing another AE if I could set it up to make the b/g stronger.
    Your information and advice has been very helpful so far.
    Thanks,
    Ron Morris

  • Having trouble with the File and Folder Objects (PSCS3 javascript on Win)

    I'm having trouble successfully creating a new folder on my windows platform, using javascripts in photoshop. In ExtendScript Toolkit 2, set to Adobe Photoshop CS3, I've tried:
    var myFolder = new Folder("/c/Documents and Settings/vcastelo/My Documents");
    myFolder.create();
    and
    var myFolder = new Folder("/c/Documents and Settings/vcastelo/My Documents");
    is this right? what am I doing wrong? It's pretty basic stuff, I know but I can't figure is out... any help would be greatly appreciated.

    [email protected] wrote:
    > oh I see, I just figured it out... the drive designation isn't case sensitive... but i didn't add the name of new folder to the destination path.
    Yep.
    >
    > var myFolder = new Folder("c:/Documents and Settings/vcastelo/My Documents/data");
    > myFolder.create();
    The "/c/Documents and Settings/vcastelo/My Documents/data" form works, too, and
    should be preferred.
    Here's an extreme example as to why this is a good idea:
    I work in an XP/cygwin environment, so I added links to all of my drives in my
    root cygwin folder. As a result, the path /p/Pictures/2008-05-05 is the same on
    the bash command line (and other tools) as it is in PSJS. I carried this over to
    my Mac, as well. I mount P: drive in OSX then setup links so that
    /p/Pictures/2008-05-05 is also the same on the Mac. This has vastly simplified
    my work. The only time I use system-specific pathnames is in a script's UI.
    -X
    for photoshop scripting solutions of all sorts
    contact: [email protected]

  • I am postin a message but no one seems to answer it . Plse I am having trouble with adobe 5 and I wr

    I am hjaving trouble with adobe 5 not compatable with my computer so how do I get rid of it and up grade  to a newer verson, hopfully a free one

    There is no application named Adobe 5, so you might have to provide the correct name for the application.  If it happens to be Creative Suite 5 (CS5) there is a good chance it is compatible with your computer but you might have to install it in a compatibility mode.  If you want to remove it you should first deactivate it. YOu might also do well to use the Creative Suite Cleaner Tool...
    Adobe Creative Suite Cleaner Tool
    helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
    http://www.adobe.com/support/contact/cscleanertool.html
    As far as I know there are no free upgrades, especially if the reason would be lack of compatibility.  It might be true if you were to have purchased one version when the next version was just about to be released, but CS5 is well beyond being considered for that.  Software is not freely upgraded to match newer machines - that's part of life.
    Just in case... if the lack of compatibility is due to your machine not meeting the tech specs of CS5, then it will most likely be true that your machine does not meet the tech specs of anything newer than that.

  • I'm having trouble with my MacBookPro and my Brother MFC 8460N.  I can scan documents from the printer to my Mac Book Pro, anybody else having this problem?  If so, any advice?

    Im having trouble witht my MacBook Pro and my Brother MFC 8460N.  I was at one time able to scan from the printer to my MB Pro, now I can still print but can no longer scan.  Any suggestions?  Thanks.

    Contact Brother.

  • Is anyone using VMware fusion and having trouble with USB devices not being recognised

    I have an Terratec Axon AX50 Guitar to Midi interface. The editor software is not Lion compatible so I have attempted to run that bit in Windows 7 on a virtual machine.
    The problem is that the VM machine will not recognise the USB device, even though when it asks which machine I want to connect to it names the device correctly.
    Any Ideas ?

    Device not recognized by iTune
    http://support.apple.com/kb/TS1591

  • (Cross Post! SORRY!)  Having trouble with Mac Pro and Vista/Boot Camp

    I feel like this board is more populated, so I thought I'd post this here as well. Forgive me.
    Ok, so it took me forever to install Vista. It kept saying my partition wasn't valid even after I'd format it. After restarting like 15 times it finally went through. So, it installed.
    BUT, now I have two issues. When Vista starts, I get this weird jumble of like MS-DOS text talking about partitions, weird numbers, my monitors just flash and kinda go nuts with the text then at the top after like 10 second of text, it says 'booting windows vista' with more ms-dos text. Finally after 30 seconds of that, it shows me that green bar that shows up to load Vista then voila, Vista is up and running. The OS works fine, but no matter what, I go through that jumble of text. Any way to get rid of it? What's wrong with it?
    Also, now that I've installed Vista, I can't get back into OS X. I have a wireless PC keyboard and a wireless bluetooth Apple keyboard, so I don't know what to do. When I go into Vista's Control Panel to select Startup Disk it says it can't load the program. So I'm at a loss. I really wanna get back into OS X!
    Any help would be fantastic!!

    Ok, I fixed the issue by using the wireless PC keyboard. I put the Vista install DVD in the drive and restarted the computer. The computer wouldn't recognize the OS X DVD.
    I remembered that the computer would register the keyboard inputs after restarting from the Vista Install Screen, so I restarted, held down alt on the PC keyboard and it worked!
    Now with the apple keyboard working, I restarted and reset the PRAM which made the computer boot into OS X by default instead of Vista.
    BUT, I still get that weird DOS text every time I load Vista, and now after keeping Vista running for a few hours, it starts kinda glitching over time. It loses connection with the network (I had to physically unplug and plug back in the ethernet cable to get it to recognize the network) and for some reason in order to use my apple keyboard, I have to turn it off and on when I get into Vista. It's annoying.
    Anywho, if anyone can help me with my Vista problems, that'd be grand :P

Maybe you are looking for