I am having trouble with lightroom and photoshop being too slow.

Currently I am using LR 5.6 64bit andCS5 64 bit. Is the programs are running too slow because I am using 64 bit? If so, how do I get the other versions. I just started having this problem with the new upgrades.
Please if anyone knows what to do please answer right away. I have jobs that I need to get out.

Thank you both for replying. My processor is 3.2 Ghz. Ram 8gig 64 bit operating. Size of files are 29.6m
available Ram is set to 7170 range in MB i have set to 5019. I have the sync set to sync everything.
When I am importing into lightroom a new scan card, Raw, Canon D 5 Mark II raw. my Lightroom changes to DNG. It can take several minutes to edit. LR will spin quite a while when I try to look at a file in library or develop module after the files have been imported to lightroom. I have my preferences set to hold for 30 days so it should not take so long for files to refocus when I close lightroom and then reopen later. When I bring photo into photoshop, it sometimes it will not open if I have another file open in Photoshop. It takes 30 seconds for a file to open in photoshop from Lightroom.When I zoom in on a photo in LR it takes up to 30 seconds to focus.

Similar Messages

  • Laptop monitor choice for photo editing with lightroom and photoshop

    Hi,
    i'm going to buy a laptop, mostly for photo editing with lightroom and photoshop use.
    I'm in trouble with the display choice.
    One laptop has LG LP156WF4 or AUO B156HAN01 display, that should be very similar matte ips display with 55%-60% coverage of AdobeRGB. You can find a review in the "Display" section of these link : http://www.notebookcheck.net/Review-Clevo-W650SJ-Schenker-M504-Barebones-Notebook.114329.0 .html
    The other laptop hasAU Optronics B156HW01 V.4 Matte 95%, that is a TN matte display with  95% coverage of AdobeRGB. You can find a review in these link (the display should be the green bar): http://www.anandtech.com/show/4649/mythlogic-pollux-1400-clevos-w150hr-tested/6
    My question is: which one is better for photo editing with photoshop and lightroom?
    Someone says that ips is better because of the fidelity of color reproduction, view angles and contrast.
    Someone, on the other side, says that the TN 95% is better because of the gamut%.
    Can you help me?
    Thanks,
    Marco Grechi

    Macbook pro is out of budget
    Hp assistance said that in italy they don't sell laptop with dreamcolor (i'll call again tomorrow to be sure ) but i think that it would be out of budget (max 2000 euro).
    They said that the best solution for me is the zbook 15 g2 (2300 euro), but they DON'T know brand and model of the display and if i can have SSD + HD inside the zbook 15 g2.
    The laptop with the lg panel costs 1500 euro. the question is; "i know that the lg display is not the best, but is it almost sufficient for my use?". In this way i may save 500/800 to buy a separated display later.
    I have read that dell xps 15 and dell precision m3800 have great display, but they are glossy and very reflective. Is it a big handicap?
    Do you know the 3k 15,6" display Panasonic VVX16T020G00 ? It should be a 8-bit display with 72%NTSC gamut ( http://www.panelook.com/VVX16T020G00_Panasonic_15.5_LCM_parameter_22014.html )
    Do you sugget me a 3k display for photo editing?
    Thanks

  • Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.

    Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.

    Hi FuzzyDunlopIsMe,
    Welcome to the Support Communities!
    It's possible that resetting your password multiple times has triggered this security.  Click on the link below for assistance with your Apple ID Account:
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Here is some additional information regarding your Apple ID:
    Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
    http://support.apple.com/kb/ts2446
    Frequently asked questions about Apple ID
    http://support.apple.com/kb/HT5622
    Click on My Apple ID to access and edit your account.
    Cheers,
    - Judy

  • Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

    Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

    Not having the problem, don't personally know anyone who is.

  • My Question is: I have a Lightroom 5 software buyed single on my MAC. If now I buy a CC Pack with Lightroom and Photoshop...what happened? How I can install AGAIN a other version of lightroom 5 ?! and this is necessary because the version included in pack

    My Question is: I have a Lightroom 5 software buyed single on my MAC. If now I buy a CC Pack with Lightroom and Photoshop...what happened? How I can install AGAIN a other version of lightroom 5 ?! and this is necessary because the version included in pack has a mobile function that my actual version don't has.  Thanks to help.
    Can live two version equal of lightroom on same MAC ?
    mmm .... I Doubt...
    Suggestion.. ?

    My Question is: I have a Lightroom 5 software buyed single on my MAC. If now I buy a CC Pack with Lightroom and Photoshop...what happened? How I can install AGAIN a other version of lightroom 5 ?! and this is necessary because the version included in pack has a mobile function that my actual version don't has.  Thanks to help.
    Can live two version equal of lightroom on same MAC ?
    mmm .... I Doubt...
    Suggestion.. ?

  • I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-

    Hi, everyone.
    I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-
    after running get-OWAVirtualDirectory or test-OWAConnectivity i'm getting a message that says "OWA it's Orphan, No Metadata information can be found."
    I only have the OWA users impacted.- anywhere users, and ActiveSync are working well.-
    Thanks,
    Fabian Alberto Campo
    MCT-MCSA 2012-MCITP365-MCTS
    Fabián A. Campo H. Consultor tecnico @ IXO Ltda. MCT MCP MCTS MCSA HP-APS Cra. 67 No. 167 – 61 of 303 Bogotá, Colombia

    Hi Fabian,
    Is there any error code when user access their mailbox on OWA. Please confirm if there is no results returned in EMS when you run Get-OWAVirtualDirectory cmdlet. Also check whether there is any Event Logs related to OWA in Exchange.
    In IIS manager, make sure the OWA virtual directory is listed in the Default Web Site. In EMC, we can navigate to Server Configuration > Client Access, select server and turn to Outlook Web App tab. Then we can click Reset Virtual Directory in the right
    Actions pane to reset OWA virtual directory.
    Additionally, please restart IIS service by running iisreset /noforce from a Command Prompt window.
    Regards,
    Winnie Liang
    TechNet Community Support

  • I have an iPhone and just goy I pad but no computer I'm trying to synch them together but having trouble with iCloud and I can't seem to subscribe for iTunes match from either devise

    I have an iPhone and just goy I pad but no computer I'm trying to synch them together but having trouble with iCloud and I can't seem to subscribe for iTunes match from either devise

    You first have to subscribe to iTunes Match through iTunes on your computer and have your music library in iTunes uploaded/matched before you can enable it on your iOS devices (see http://www.apple.com/itunes/itunes-match/).  Without a computer you won't be able to use iTunes Match.

  • Having trouble with itunes and windows 8

    anyone else having trouble with windows 8 and itunes?  My computer doesn't seem to recognize my shuffle.

    A simple search would have answered such a silly question.

  • Anyone having trouble with Splashtop and Maverick?

    Splash top will not run since installing Maverick.  I have uninstalled and reinstalled, but still no go.  Anyone else?

    I've been having trouble with this since I upgraded to iOS 7.0.2! Logged on tonight to see where I could log the problem with apple to get to fix in the next update! Seen on Facebook that others having same issue.
    I've also had a problem that when I put phone in to airplane mode it isn't reconnecting to the network afterwards!

  • Having trouble with flash and linking to Sliding panels - PLEASE help

    Having trouble with Sliding panels and flash. Otherwise everything works fine but when I'm trying to implement the link
    <a href="#" onclick="sp1.showPanel('panel1'); return false;">Panel1</a>
    to a flash button I get confused. I have tried following
    on (press) {
    getURL("javascript:sp1.showPanel('panel1');");
    and it did not work. What would you suggest? I am desperate. Please help me! Any suggestions are highly appreciated!!!!

    Thanks for your answer!
    I have tried both sp1.ShowPanel('panel1'); and window.sp1.ShowPanel('panel1'); they both give blank window with [object]
    I have found a solution that works in other browsers, but not in IE. Well basicly it works, but after a few clicks IE freezes.
    on (press) {
    getURL("javascript:sp1.showPanel('panel1'); void(0);");
    Would you happen to have a solution other than that? I believe that the void(0); causes the IE to freeze.

  • Having trouble with Dreamweaver and fireworks willing to pay for support

    I'm new to the forum and i was hoping to get some help with
    dreamweaver and fireworks.
    I built a site on my own using dreamweaver 3 years ago but
    have forgotten almost everything. I am planning on building a new
    web site and have been messing with dreamweaver for over a week
    trying to figure it out, with little success. I bought a web
    building package years ago that included fireworks, dreamweaver,
    freehand and maybe more, but i lost my books on dreamweaver and
    fireworks somehow.
    Anyways, I was trying to learn dreamweaver 3 and fireworks
    and was having a lot of trouble with it. The dreamweaver bible
    assumes you know how to make a navigation bar using fireworks and
    that simply isnt the case for me. So I need help with that.
    Also, i have been having trouble with my template. This is
    how you save your basic page correct? For some reason it doesnt
    save the whole page for me. I figured out the editable regions
    part, I think, but since i didnt know how to make a navigation bar
    I made my own links out of text, and this part isnt saving with the
    template.
    I have a lot more questions but i think ive taken enough of
    your time. I am willing to pay someone to help me build this site,
    i cant afford a lot but i think my questions are pretty basic.
    Thanks

    There is a recent thread on the FW forum that may interest
    you - it's called
    "Firworks and HTML". The advice there applies in your case,
    too.
    One problem with your use of DW3 is this -
    the browser world has changed quite a bit in the almost 10
    years since DW3
    was released. Some (many?) of the behaviors in DW3 simply
    won't work any
    more because of these (significant) changes. Are you
    absolutely locked into
    using DW3?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "jfmalewitz" <[email protected]> wrote in
    message
    news:[email protected]...
    > I'm new to the forum and i was hoping to get some help
    with dreamweaver
    > and
    > fireworks.
    > I built a site on my own using dreamweaver 3 years ago
    but have forgotten
    > almost everything. I am planning on building a new web
    site and have been
    > messing with dreamweaver for over a week trying to
    figure it out, with
    > little
    > success. I bought a web building package years ago that
    included
    > fireworks,
    > dreamweaver, freehand and maybe more, but i lost my
    books on dreamweaver
    > and
    > fireworks somehow.
    > Anyways, I was trying to learn dreamweaver 3 and
    fireworks and was having
    > a
    > lot of trouble with it. The dreamweaver bible assumes
    you know how to make
    > a
    > navigation bar using fireworks and that simply isnt the
    case for me. So I
    > need
    > help with that.
    > Also, i have been having trouble with my template. This
    is how you save
    > your
    > basic page correct? For some reason it doesnt save the
    whole page for me.
    > I
    > figured out the editable regions part, I think, but
    since i didnt know how
    > to
    > make a navigation bar I made my own links out of text,
    and this part isnt
    > saving with the template.
    > I have a lot more questions but i think ive taken enough
    of your time. I
    > am
    > willing to pay someone to help me build this site, i
    cant afford a lot but
    > i
    > think my questions are pretty basic.
    > Thanks
    >

  • TO ALL THOSE HAVING TROUBLE WITH ICHAT AND AIM ON MACBOOKS

    I've had a lot of trouble with AIM and iChat on my new Macbook, but I believe I've figured out the answers to all the problems I and others have encountered.
    Firstly, for those who's AIM continually crashes and displays the message "The application AIM unexpectedly shut down," my answer to your problem is too many sent messages. Watch the bar in the bottom left of your chat window, when it reaches red, your application will probably shut down.
    Secondly, for those experiencing difficulties with iChat, it's most likely a problem with communitcation between your wireless router and your computer. Try these steps:
    1. From the Apple menu, choose System Preferences.
    2. From the View, choose Sharing.
    3. Click the Firewall tab.
    4. Click New.
    5. From the Port Name pop-up menu, choose Other.
    If you have a Macbook, you'll probably have a TCP Port Number Bar and a UDP Port Number Bar. Try these steps:
    1. In the TCP Port Number(s) Bar, type: 5190, 5298
    2. In the UDP Port Number(s) Bar, type: 1024-5219, 5221, 5223-65535
    3. In the Description Bar, type: iChat AV
    4. Click OK
    5. Click Start above the window with your firewall settings, and make sure the box next to iChat AV is checked
    6. Relaunch iChat
    Good Luck! I hope this solves some of the problems that people have been encountering.

    Rob
    My Linksys is the WAG54G, which might be different from your WRT54G. Currently, UPnP is disabled and the Router ports are a bit of a mystery, because they're forwarded to an IP address that's outside of the current DHCP Address Range! Once I got it working, I was reluctant to change it even though it looked anomalous.
    The Firewall is on, with the iChat ports open that I listed in the previous post.
    My two regular buddies are my sons, who both use Trillian Pro on a Windows machine. Works pretty well despite occasional freezes or garbled sound.
    Hope you get sorted soon.
    Dave

  • I am having trouble with safari and most apps shutting down when I'm in the middle of stuff what do I need to do to resolve this?

    I am havering trouble with safari and apps shutting down on me all the time what can I do to resolve this problem. Thanks :-)

    Make sure you have enough free space on your iPad. With iOS 7 it is recommended that you have 15-20% of the storage space on the device free.  For a 16 GB device that is 2.4-3.2 GB free. For a 32 GB device that is 4.8-6.4 GB free. For a 64 GB device that is 9.6-12.8 GB free.
    Also try a reset. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • 32 Bit HDR Problem With Lightroom and Photoshop CS6

    Hello all:
    In following Julieanne's Adobe TV topic here ->  http://tv.adobe.com/watch/the-complete-picture-with-julieanne-kost/quick-tip-creating-32bi t-hdr-images-in-lr-41/ a problem arises when trying to save from Photoshop CS 6. According to Julieanne you hit ctrl-s so that PS saves the HDR image and then it should show up in Lightroom. What I have found is that hitting crtrl-s saves it as a PSD file which does automatically show up in Lightroom, however Lightroom but  can't read it. If I do a save-as, and select TIFF as the extension Lightroom will not automatically see the TIFF file. I have to synchronize the folder in order to have Lightroom import it.
    Why would Lightroom automatically see a PSD file (that is of no use) and not see the TIFF file?
    Is there a setting in PS that will change the preferences to save as a TIFF instead of a PSD file?
    Using Lightroom 4.2 and Photoshop CS6.
    Thanks,
    Terry

    Go to LR's preferences > External Editing tab and change the top pop-up to TIFF and you should be all set.

  • Having trouble with pse7 and opening jpg files

    I have been using pse7 for quite some time and today I have started having trouble.  It is as if the program is "not responding" for a time.  So here is what is going on . . . I can open a file or group of files (jpg images) and then when I ctrl+o to open something new I can't see what is in the folders . . . and eventually it won't even let me open anything.  I will ctrl+o and the little blue circle will move, but then go back to the arrow without going to my folders.  I'm not sure if this is making any sense, but it is REALLY frustrating me!!!  I have restarted my computer several times today and it is not helping.  Last week I did update the driver for my printer and now I'm not able to print anything from PSE . . . I don't know if this is part of the problem.  I was getting the "not enough memory (RAM)" message last week as well.  I don't know if all of this is together, but it is driving me crazy!!!  I am in the process of downloading the pse9 trial and I'm hoping that this will help.
    I am working with windows7.
    thank you!!!

    You might have opened several images of large sizes.
    You can go to Edit menu > Preferences > Performance
    Move the slider to the right to increase the memory allocated to PSE
    Also, increase the Cache level.
    Restart PSE Editor
    The problem also can be, that you have several programs running on your system. You might want to close unwanted programs while working on several images in PSE. This also reduces the available memory for PSE to work on.
    Hope this solves your problem

Maybe you are looking for