I am having trouble with my i pad it freezes it turns off by itself and the screen turns blue?
I am having trouble with my i pad it freezes and it turns off by itselfI and screen turns blue?
Start by rebooting the iPad by holding both the power and home buttons until the apple logo appears and it restart, ignoring the red slider if that appears. See if that helps.
Similar Messages
-
I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this? I have shut down my phone, but still no luck!
iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.
-
i'm having trouble with installing a 8g kit in my late 2009 mac mini. when the parts are installed all i get is a beeping sound, is there any way to get around this?
What is the source & link to this 8 GB kit please?
Can you count the beeps or flashes?
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
http://support.apple.com/kb/HT1547 -
I'm having trouble with my clone tool. When I am cloning it appears OK (the image within the brush circles is the correct colours) however once the cloning is done, it processes leaving me with a darkened blur. Any help with what's going on would be appreciated.
Which tool in Camera Raw, exactly? The Spot Removal Tool? Adjustment Brush?
-
I having trouble with my i phone 4 ...when i make a call the other person cant hear me
im having trouble with my i phone 4 ...when i make a call the other person can not hear me
Kayla, check the grill that covers the microphone (bottom left next to charging port) and make certain there isn't any dirt, makeup, spilled soda clogging the grill causing it to fail. My sister had a similar issue with her earphone and while I was in the process of replacing it for the third time I decided to check the grill under a very bright light and it was totally clogged up causing her not to be able to hear her phone calls. Use a Q-Tip dipped in hot water and gently wipe the grill. Just barely moisten it, no need to go crazy with the water. Might as well clean the earphone and speaker on the bottom right too. Anyhow, that could be what your issue is and if so it's a really simple fix. If that doesn't help just replace the microphone. It'd cost maybe $5 and ten minutes of your time to do. Good luck, John
-
I can't move downloads onto my desktop nor can I move folders around desktop. Have been having trouble with iPhoto also. "Terminal" has shown up on my dock for the first time. I tried repairing using disk utilities.Please Help!
I have the same issue-was there ever a solution that worked? Thanks.
-
My computer continually asks me to enter my password for Keychain access. This problem is continuos and I am having trouble with eliminating it.
I have changed my password through Security and my Accounts numerous times to no avail.
Is there anything I can do other than Resetting the entire computer and re installing all of the software, apps, etc.etc.Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences... ▹ First Aid
There are four checkboxes in the window that opens. Check all of them. if they're not already checked. Close the window.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.
If you use iCloud Keychain, open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device. -
Greetings, I'm having trouble with my iMouse continually disconnecting from my MacBook Pro in Mavericks. The batteries are solid. I just eliminated the bluetooth for my headphone. I have used the mac to cast on my TV. I use bluetooth. ANy ideas?
Hi clemenbw,
Welcome to the Apple Support Communities!
In your situation, I would recommend reading over the attached article to help you troubleshoot your Magic Mouse Bluetooth connectivity issues.
Troubleshooting wireless mouse and keyboard issues
Have a great day,
Joe -
im having trouble with my i mac it freezes up an some times wont start normally it will jus display a gray and white fuzzy screen (any Help Out there)
Hello there, DJ ROb E Rob.
The following Knowledge Base article offers up some great recommendations for troubleshooting the gray screen at startup:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
since i updated my iphone 4 to ios 6, i ve noticed that the wifi connection turns off each time when the screen is locked. I need to be connected with wifi all the time so as to stay updated with all my emails. is there anyway for this problem.
(PS: i know we could use 3G but i want to use wifi instead)I am having a really wierd issue as well that is probally related. I dont see 95% of the album artwork associated with my music. Also, it seems as if this has gotten worse since I started using that match feature
-
I'm having trouble downloading Aps on my iPad . I have several that have frozen during downloading and I can't delete them. I've tried resetting my iPad, airplane mode and going through iTunes and Aps store, nothing has helped. Any ideas?
I'm having a similar problem, but different circumstances. Someone gave me their iPod nano to load with tunes. I, myself, don't own an iPod, and the flimsy booklet that came with this device is pointless -- no real info. Anyway, once it was charged, I chose tunes from my library to upload to the iPod, but the entire library began to load (not just the checked selections). I made several attempts to resolve this, including an attempt to restore the iPod to its original settings. Unfortunately, now the computer and iTunes will not recognize this iPod (when iTunes is open and iPod is connected, iPod does not appear in source list, and desktop only reads the device as "iPod", as opposed to what it was originally reading it as) and I can't even get back to the part of iTunes that asks me if I want to restore the iPod. Do I have to bring this to an Apple store, or is there anyone out there who can tell me how to resolve this? I tried the "5 R's" recommended by Apple, but they don't seem to work.
mich solo -
I have been using my iPhone 4s a lot mainly for email and to text my friends. I have also noticed that my iphone seems to have recently begun freezing up. It's done this a number of times, and ive only noticed it happen after i updated the software to 5.1 version. Has anybody else been having this problem? I have takin good care of my iphone, and I care to know why my 300 dollar phone is currently being out done by any 20 dollar walgreens phone that I have had in the past.
I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot! -
I am having trouble with my i pad 2.
I did the ios update and skipped signing in to my icloud. it was not excepting my password. and the i forgot my password was not working. i kept getting told network failure. now my i tunes store and my face time r not working. how do i fix this problem
Maybe you could try and sign into icloud now from settings->icloud and see if that helps...But im not 100% sure, though.
regards,
RohanZ -
Download trouble today Got the message for new updates for Lightroom and Photoshop CC. Download fails, under learn more ,, corupt files Fist time this hapened in a year Whats the remedy?
There's a number of potential problems here, and they may not necessarily be at your end.
First of all, it should be clear that CMYK is not so much a generic "image mode" as it is a description of specific press conditions. If you produce final CMYK, you must have the right profile. Don't use Image > Mode, use Convert to Profile.
Given that, I would question anyone who doesn't accept Adobe RGB photographs for a magazine article, because it implies a process that isn't properly color managed and generally not up to date. A standard workflow today would use InDesign, where images are normally placed in their original RGB space whatever that is. Then the conversion to final output CMYK is done as the last step, when producing a press-ready PDF from InDesign.
It helps tremendously if you know that final CMYK, because then you can proof to that so your file survives the CMYK conversion with the least possible damage (we're talking gamut clipping here; not general color shifts). But it's not absolutely required, which is why this workflow is relaitively safe.
Third, CMYK jpeg is in itself risky, because many jpeg decoders (in some software) don't have proper CMYK support. The result can be weird colors. This could well be the problem here, because it sounds as if your client uses a non-standard workflow.
So what to do? I would send two files. One sRGB as reference, which is guaranteed to come through correctly. Then find a way to send TIFF for the CMYK version if they insist, or ask them to try opening it in different software. Of course you should have a calibrated and profiled display, but I agree that's probably not the immediate problem here. There's no particular reason a CMYK file should come back with twisted colors if it's opened and processed in properly color managed software. -
Below that there is more, it says," The certificate for this website is invalid. You might be connecting to a website that is pretending to be (Whatever the name of the site is) which could put your confidential info at risk. Would you like to connect to the website anyway?" and it give the options of show certificate, cancel, and continue. But the thing i dont understand is that it does this for basically EVERY page i visit. even facebook. and when i click "continue" it alows me to go to the page but limits what i can do and only shows certain things. i'm very frusterated with it. Help Me!
This issue was resolved! I didnt think about restoring my computer to factory settings but I did and now my computer works like brand new. basically, just back up your files and do the following:
http://www.youtube.com/watch?v=yPmT5Xbb8p0
Maybe you are looking for
-
MSI KT3 Ultra-ARU + All In Wonder Problem
I've got a odd problem that is related to putting my machine into Standby. If I do so the night before, then wake the system up in the morning I see issues that point to memory corruption or driver failure or a conflict with the VIA chipset. Outloo
-
Flash running for one user not another
I recently upgraded to Windows Explorer 7. I am running Windows XP and I have the computer set up for two users, me and my wife. After installing Explorer 7 my wife's account can no longer run flash content even though I can from my account. I have d
-
Is it possible to upgrade a white Macbook (2007) to a unibody macbook, either the white or the aluminum? Is this something Apple offers?
-
To empty alv field declared as WERT
Hi, I have a field in alv which holds values declared as WERT. In one case the field need to be empty. To do this I used CLEAR statement. But when I did like that, the field showed 0. How can I empty the field as it shows nothing? Any help will be a
-
How to disable forward button for particular workitem in SAP Enterprise portal 7.4
HI Experts, We have recently upgraded our enterprise portal to 7.4 version. We have a requirement to disable the forward option for a particular shopping cart workitem coming from SRM system. I searched the help document and other threads and found t