I am having wi fi wireless network after down loading ios6

I am having connecting my wireless net work to new purchased I pad 3 after down loading iOS 6

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

MacBook can't see my home wireless network after upgrade to OSX 10.8.5

After upgrading to OSX 10.8.5, my MacBook does not detect any wireless nertworks. My iPad and iPhone work fine, my router has been rebooted, WiFi is turned on, and the ethernet connection is how I am writing this message to you via broadband. There are a half dozen wireless networks in range (according to my iPhone) but the MacBook cannot find the router I am sitting next to. Any ideas on how to correct this issue?

It appears an SMC reset was required:
HT5815 I've just done the 10.8.5 update on my MacBook Pro end of 2008, and WiFi don't work after reboot... Impossible to activate it...
Here is your other post: MacBook can't see my home wireless network after upgrade to OSX 10.8.5
If you reply to it and marked it "solved", perhaps with a link to that post (copy and paste it, or just say you performed the SMC reset) it will help others find a solution. Thanks!

MacBook fails to connect to wireless network after sleep mode

My MacBook fails to reconnect to my wireless network after waking up.
After turning on my MacBook it establishes a decent connection to whatever wireless network I choose (mostly at home). When I close the lid and open it again the network connection is lost and is only reestablished after reboot.
Hopefully someone has a solution as this is very annoying.

Instead of a reboot go to your Wireless Menu icon and select "Turn Airport Off".
Wait a second and "Turn Airport On."
For me this has been a problem for about 2 years. This is much faster than a reboot!
Also see this thread - http://discussions.apple.com/thread.jspa?threadID=2383405&tstart=0
It's the same issue.

HT1595 My apple TV disconnects the wireless network after it logs on

My apple TV disconnects the wireless network after it logs on

Welcome to the Apple community.
Do you actually see a weak signal shown on the Apple TV when it is connected to your network. The problem may not be a weak signal, it may be interference from other networks or electrical devices.

After down loading the latest update the iPad wifi has difficulty connecting even though a good signal is present

After down loading the latest update the iPad wifi has difficulty connecting even though a good signal is present

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

After down loading os 10.7, I can no longer open microsoft word

After down loading os 10.7, I can no longer open microsoft word

No, your old Word files should still be where you left them and can be opened by either a current version of Office:mac or even Apple Pages (more or less). The problem that you are having (we think) is that you are trying to run an older version of Microsoft Office:mac (e.g. Office:mac 2004 or older) and this software was compiled for a PowerPC processor. The last few versions of the Mac OS has allowed PowerPC programs to run on an Mac with an Intel processor through a translation system called Rosetta that converted PowerPC code to Intel code. However, Apple stopped providing that software in 10.7 so any PowerPC applications will no longer run.
Office:mac 2008 and Office:mac 2011 will run on an Intel-based Mac and therefore will run on 10.7.

After down loading raw plug in my CS5 and lightroom4.2 cannot read D800 images

after down loading raw 7.1 plug in in my CS5 and lightroom4.2 cannot read D800 images

ACR6.7 for CS5 should also handle D800 images. You may still get a warning message about needing 7.1 (which implies also having CS6), and the manual defringing tool was added to LR after ACR 6.7 came out, but other things should be the same.
If LR 4.2 isn’t reading your D800 images, then perhaps they are being corrupted. If you are using an obsolete version of Nikon Transfer, that could be one way to corrupt them. You may be able to fix Nikon Transfer corrupted NEFs, with this tool: http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html

Why can I not open raw images in bridge after down loading raw plug-in for my new Canon 70D?

Why can I not open raw images in bridge after down loading raw plug-in for my new Canon 70D dozens of times? I have never had any where near this amout of trouble with all my other Canon digital cameras.
<Removed by Moderator>

http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Mylenium

HT5957 After down loading the (7.0.2)battery is getting flat in no time. Please help me out.

After down loading the &.).@ battery is getting flat no time.

Hello, rohan.kishore.patel.
Thank you for visiting Apple Support Communities.
Battery life can be difficult to troubleshoot as multiple factors contribute to how long a charge can last. Graphic intensive applications, display brightness and data connectivity are just a few of the items that can cause the battery life to decrease rapidly. I would need to know a little more information about your usage patterns to give you and idea on how to maximize battery life. However, here are some tips on how to adjust settings and charge the device that may help.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/ht1476
About Batteries
About iPhone Batteries
If you feel that you need assistance with the battery concern, you can always reach out to us via the link below.
Contact Apple
Cheers,
Jason H

Help...!!!! After down loading the latest software version 5.0 my iPhone went completely dead. I can't switch it on... It's completely dead. What do I do..?

Can someone help please..? After down loading to the latest software verssion 5.0. My iPhone went completely dead. Can't swith on any more. What can I do?

Hi, thank you very much for your reply. No my phone was never been jailbreak-ed. Never been dropped in water or in any wet surface. Dropped on the floor while texting yes, but it was just a one time incident, last year august i can clearly remember, but after that no more (phone still works fine even after.) restored the phone again earlier, but problem still occured. Will try to go to Apple also to ask and have it checked. Just worried because my phone is already out of warranty. Will keep you posted. Again, thanks. If you have any more advice just let me know. It would mean a lot.
Cheers,
N

My ipad4 is isreally slow after down loading the new ios8

my iPad 4 is really slow after down loading the ios8 does any one no why this is?

Hi, Joshchestney.
Thank you for visiting Apple Support Communities.
Here are the best steps to go through when an iOS device is unresponsive.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Jason H.

How do i after down load creative cloud and have it in the tool bar , then click on it ,it brings up a box called creative cloud then just rotates not bringing up any apps ?

how do i after down load creative cloud and have it in the tool bar , then click on it ,it brings up a box called creative cloud then just rotates not bringing up any apps ?

Mac Spinning Wheel https://forums.adobe.com/message/5470608
-Similar in Windows https://forums.adobe.com/message/5853430

I lost my iphone the day after down loading from utune i got the bill but the songs r not at my itune account can u all put them there? I wont be buying any more if this cant be fixed.

I lost my iphone the day after down loading from itune but the songs aren't on my itune account but I did get a bill for the song. I did n't get another iiphone phone but I need my music put back on my account my iTunes account. If I'm paying for them! I want to music!

It's as simple as this:
Open iTunes.
Click iTunes Store on the left side of the screen.
Look on the left side - click Purchased (it has a NEW graphic next to it)
You will see everything you have every purchased from iTunes. You can redownload any of it.
Enjoy. Good luck finding your iPhone. If you get another one make sure to set up Find my iPhone as soon as you get it so you can track it down if you lose it again.

IPhone not connecting to WEP 128 Wireless network after 1.0.2 upgrade

Hello all,
I have the iphone since the last week. I was pretty happy with it until I upgraded the iphone to version 1.0.2.
From that very moment, the WEP Hex/ASCII Key option dissapeared when setting a connection to a wireless network. Mine was working with 1.0.0 and now it does not work.
I am Telecom engineer, and I pretty sure everything is correct. Mi 128 wep key is 13 characters long and (of course) 26 HEX long.
I have tried putting " before and after the ASCII key and also entering a $ sign before the HEX key.
I have also disabled the Auto caps, just in case.
After all this testing and a quick look at google, it seems that there are more people with the same problem.
Could anyone say to me if there is any other way? Or if apple is gonna release a new version with this issue fixed?
I am quite dissapointed.
BTW: I have tried all the stuff of reseting the router and "forget setting", etc.
BTW2: To switch to WPA may be an option in my network by it is no way a solution as the majority of the public AP use WEP....

I am using a Linksys BEFW11S4 and I've tried to make the WEP key work on and off for the last 2 months while tapping into other people's wifi to get by without it.
Previously, when I chose someone else's secured network from the 'available networks' list, it would open a window and ask for password. But if I selected my own secured network it wouldn't and would just say "unable to join XYZ network".
Here is what I did tonight and I'm not sure which step did the trick, but it's worth a try:
1 - On the router, I went into the Password tab and entered a password. Previously I hadn't been using any.
2 - On the iPhone, I clicked on the little arrow next to my network's name. In the following screen entered the DNS address of my router (on Linksys the address is found on the Status tab).
I now have it connected to my network. I disconnected and reconnected again without having to enter the password, so either it's saving the password someplace or it's the DNS address that did the trick. The iPhone MAC Address shows up in the DHCP Active IP Table of the router and the router is still WEP protected.
I hope this wasn't too confusing. If you reply, please tell me how you feel about the $200 price drop today!

Does anyone have trouble connecting to their wireless network, after being logged on for some time? Mountain Lion.

I am having trouble connecting to my wireless network. It works when I startup my computer but, after a while it can't seem to find the wireless network. I have an Airport Extreme and the light is green. The only way to remedy this problem is to restart my computer. Mountain Lion isn't that great after all not to mention it distorts some images when scrolling. I am kindly asking for some advice, I assume a major update will be coming soon.

You don't by chance have a "invisible" or "hidden" network enabled on the router?
Because Mac's won't reconnect automatically now to hidden network only upon reboots, it's sort of like advertising the hidden network if you take the computer elsewhere.
Also hidden networks are no deterrent to hackers, they see all.
Also check your time and date, make sure they accurate first, then save that, then make sure it's updated via Apple time servers in your general location (System Preferences > Time and Date) If your being kicked off, your DCHP lease might be expiring too early.
WiFi, Internet problems, possible solutions
WiFi security issues, at home and WiFi hotspots

I am having wi fi wireless network after down loading ios6

Similar Messages

Maybe you are looking for