I am in Africa with a slow modem for internet. I tried to downlad Firefox 4 and was confronted with a video about how to use it which will suck up all my modem credit. So now I don't have Firefox 4. How can I get it without having the download video?
On a Lenovo laptop, completed the download and restart and got the video which proceeds very slowly because this is Africa! I have learned never to watch videos here because it blows all my modem credit in a short time. Now I don't seem to have Firefox 4 on the computer, but the previous version is there, though unpinned from the TAskBar.
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )
Similar Messages
-
I had to replace my hard drive and load Snow Leopard, but iPhoto is not there. How can I get iPhoto without having to pay for it.
The iLife that came with your MacBook is on the #2 gray disk that came with the MacBook.
The App Store version of iLife ‘11 programs will only work with 10.7 or 10.8. You can get the iLife ’11 DVD which will run on 10.6 on eBay or Amazon.com fairly cheap.
http://www.ebay.com/sch/i.html?_odkw=apple+ilife+11&LH_Auction=1&LH_BIN=1&_sop=1 2&_osacat=0&_from=R40&_trkparms=72%253A1234%257C66%253A2%257C65%253A12%257C39%25 3A1&LH_PrefLoc=1&_sc=1&_trksid=p2045573.m570.l2632.R2&_nkw=apple+ilife+11&_sacat =18793
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?s=so ftware&ie=UTF8&qid=1376932206&sr=1-1&keywords=ilife+%2711 -
I don't have IMAQ vision, where can I get some super basic easy VI's for IMAQ?
Hello,
I don't have IMAQ vision, where can I get some super basic easy VI's to get images from my IMAQ PCI-1424 board, without Vision?? is there some kind of tutorial that will help me get started from the ground up in designing VI's? Also I am trying to run the HL Snap in picture control.vi and I keep getting an error that says:
-1074397150 occured at IMAQ snap.vi
Possible reasons,
NI-IMAQ (Hex 0xBFF6022) wait timed out; aquisition not complete.
Why am I getting this??? it is driving me nuts, I don't know how to get a image on my computer from the IMAQ board. I can get one in MAX. Also in MAX I try to change the camera driver to Kodak because that is the boar
d that I have KLI-2113, but when I try to change anything under properties like the window size and then apply it, it says error removing old camera. why does that do that? Some of the other drivers sort of work and let me change the settings. I don't know if they work right though. I can get atleast some response to light from the CCD chip.
Anyways, thanks,
BrianBrian;
There is an example on how to display images in LabVIEW without having the full IMAQ application.
You can always convert the images to bitmaps (flattening) and display them in a picture indicator. If you are going to do some image processing within LabVIEW, this may be the way to go.
About the error you are getting, hopefully the above example will help you in resolving the issue. If the problem persist, it will be more beneficial if you can post the code. Also, you may get better answers if you post your question in the Vision forum.
Regards;
Enrique
www.vartortech.com -
Is there a way I can remove an iphone from my icloud account without having the device in my possesion?
Go to Settings > iCloud, and sign out of the Apple ID there, then sign in with a different Apple ID.
-
I was asked to download the latest version of Firefox. I did so and when I went to install it, I got the error message that implied I didn't have authorization to run some of the features. The upgrade stopped and now Firefox will not run because it says it is locked. I am running Firefox on the PC side of my MAC to ask for the fix. (I'm running Parallels.) I have one of the original Intel MAC laptops. Please give me the link to an older version so I can restore Firefox.
If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
updated to newest firefox..now alert box pops up saying can't find chrome toolbar..which I don't have apparently firefox has worked with this toolbar for a long time I update regularly why do I get this alert now and how can I get rid of this annoying alert thank you
can't find file at chrome://bbrs_002.tb/content/toolbar.html
-
Their directions send to Google chrome bar that I don't have.If you can call me and talk me through this, my phone is xxx xxx-xxxx. Thanks
What are your current cookie settings?
To see all History and Cookie settings, choose:
*Tools > Options > Privacy > Firefox will: "Use custom settings for history"
*https://support.mozilla.org/kb/Options+window+-+Privacy+panel
There are also extensions that can block cookies and other files (data), so you can check that as well.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
im only looking to do it with single images maybe a caption , but wothout having to have teh area where the dots/nubers / sliders go
if i just drop an image son it doesnt seem to offer trhe fullscreen option
any ideas?
arbyiBooks images don't zoom or respond to pinch any way I would expect. They will expand a bit, but snap back to size when released. Even worse, you can't make a picture a link.
I have heard that you can make an empty text box, lay in on a picture, and then link that, but I haven't tried it. Even if, I don't know if you could link it to an object in the book file. I think we're out of luck for now on this. -
How
Contact the iTunes store support people at expresslane.apple.com (it will be via email), provide them with the date of purchase, the transaction # (from your purchase history), and they will likely regrant the download. You could also try accessing the purchases tab on your device, and try the download again.
-
Help, please!! I recently upgraded to a new Iphone 4S from a 3..I could not upgrade the software so plugged it into my pc and connected to Itunes. It asked me if I wanted to use it as a new phone or restore to my phone, (not being very computer literate, I of course chose restore) So now I have a phone that only has info for contacts from October!! I lost all new contacts, messages, etc. Is there a way to get back those contacts, etc? Thanks!
restore your contacts and calendar info from the program you sync with
-
My iPod Touch didn't come with a Itunes store app, just a downloads app that doesn't connect to the itunes store. So, when the site says to connect and follow the instructions, I can't because I've got no store application. How do I get the store application, or how do I download iOS if there's no dowload link at the online iTunes store?
What model iPod do you have? If it is a 1G iPod then you can only update to iOS 3.1.3 via this link:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
Identifying iPod models
If you iPod has less that iOS 2.0 then there is no App Store app. One can also hide the App Store app via Restrictions (Settings>General>Restrictions. -
Can I back up my iPhone 4S to my ipad 3 (64 gb)? I do not have a computer running Mountain Lion. Our desktop still runs Tiger, so I purchased the 3rd generation iPad with 64 gb thinking it had had plenty of room to backup my iPhone photos. I used a camera connection kit and transferred about 1100 old photos from my camera roll on my iPhone to my ipad. I then deleted pictures from my iPhone and now my camera roll has only 357 photos. However, in the Settings, under "About" it says I have 2147 photos. Why? I only have a total of 216 photos in all my albums. However, now I don't have enough space in iCloud to backup either device. Why not? Any help, any advice, appreciated please! I spent a long time on the phone with Apple today and they couldn't solve the problem.
rabidrabbit wrote:
Can I back up my iPhone 4S to my ipad 3 (64 gb)?
no
rabidrabbit wrote:
However, now I don't have enough space in iCloud to backup either device. Why not?
iCloud only give so much space for free storage, then if you exceed the limit of 5gb you have to pay for additional storage. -
Help, Re Installed Elements 11 and now I don't have Orgainzer
Help, I've had to re install Elements 11 and now I don't have Orgainzer. How do i get this back? When I click on it from the editor nothing opens and there is no App for it like I had previously. I'm on a Mac
Try this. Uninstall, download from http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html and install from the downloaded file using the serial number from your retail version.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
I have gotten a giftcard for iTunes and I want to spend it but before I had a credit card giftcard and I spent it all and now I don't have a credit card and I just want to use thee iTunes one how do I delete the card on my iPhone
Hello Clancbelle,
It sounds like you have a credit card saved to your Apple ID payment information and you would like it to be removed from the account and set the payment method to None. You should be able to do this with the following article:
iTunes Store: Changing your payment information
http://support.apple.com/kb/ht1918
Changing your payment information using an iOS device
Tap Settings on the Home screen.
Tap iTunes & App Stores.
Tap your Apple ID. (If you aren't signed in, enter your Apple ID and password and tap Sign In.)
Tap View Apple ID.
Enter your Apple ID password.
In the Edit section, tap Payment Information.
Update the information that you want to change.
Tap the Done button when you're finished.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
I had iLife pre-installed on my aluminium Macbook 2009 with OSX Leopard on it. My hard drive broke but got most of the info off it and just installed snow Leopard on to a new drive and then downloaded and installed Mountain Lion over it. Now I don't have iLife anymore. How do I get it back?
Welcome to Apple Support Communities
Mac OS X doesn't come with iLife applications, so you have to install them manually after installing Mac OS X.
Insert the Applications disc or Mac OS X Install Disc 2 DVD and install iLfe applications. Then, open > Software Update, and install the latest update. If you want, you can purchase iMovie, GarageBand and iPhoto in the App Store, so you will get the most recent version
Maybe you are looking for
-
Macbook Pro connection to Sony Bravia LCD Color TV
I have a macbook pro and I'm trying to connect it a Sony Bravia LCD Color Television. The macbook detects the sony tv and brings up a dialogue box about it. However, on the tv it says no signal. Anyone have any suggestions as to why this is happening
-
SRM 7.0 catalog call, method launch_catalog
Hi, can anyone tell me, how to call a catalog in web dynpro for Abap? I want to call al catalog similar to SRM 7.0. In SRM 7.0 the class /SAPSRM/CL_CH_WD_NAVI_SERV and the method LAUNCH_CATALOG is used to call a catalog. Does anyone have an example h
-
How do i change my itunes library from one computer to another
how do i change my itunes primary computer to a new computer and still use both of them
-
Am using CS5 and would like to have "just" the interior of the table to have a specific background color. Currently - using the code below - I receive the following result with white appearing outside the table perimeter. Would also like to be able
-
Oracle RAC new feature for interconnect configuration HAIP vs BONDING
Hi All: I would like to get some opinion about using Oracle HAIP (High Avalibilty IP) for configuring the RAC interconnect vs using network interface bonding. This seems to be a new feature for Oracle GI from 11.2.0.2 and later. Have anyone had any e