I am in Bolivia and cant seem to call the uk or spain on my phone
I have tried the usual codes for both the uk and spain 0044 +44 etc but i cant get through. Even ringing 150 wont work, please help
Did you enable roaming before you left? You may still be able to via your online a/c.
Similar Messages
-
HELLO EVERYONE! I have a canon xl1 and cant seem to import the video to FCPX. HELP IS APPRECIATED!
HELLO EVERYONE! I have a canon xl1 and cant seem to import the video to FCPX. HELP IS APPRECIATED!
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 3 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.20f4
Serial Number (system): W88034J5X86
Hardware UUID: 00000000-0000-1000-8000-001EC2068236 -
I cant seem to download the latset version of itunes onto my laptop computer. I keep getting this error HRESULT: 0x8007054F. Dont know what that means. Please HELP!!!!!!!!!!!!!!
Hi tKalra - I got the same error and finally managed to install itunes successfully. Below is what happened with me.
I have Windows7 64 bit. I downloaded itunes 10.6.3 for windows64bit and started the installation wizard by opening the downloaded file. At one stage I got the same error you have mentioned above. I started googling to find a solution and thats how I found your post. Anyway I went through lot of other posts that suggested lot of different things but I just wanted to try my own thing first.
So what I did is to go through with the wizard by clicking ok on the error. I then got an error about apple mobile device service not running. I ignored and went ahead with the installation. Installation finished but the itunes wont start giving the service not running error. I tried to manually start the service but it gave a privilege error.
I then went to control panel and uninstalled itunes, apple mobile device thing and bonjour..basically what ever was from apple. Then I also went to start -> run -> regedit and checked for any registry keys for apple under local user and local computer. Deleted if found. Restarted and then just right clicked on the itunes setup file that was downloaded and ran it as administrator. That did it for me. So I am guessing it was privilege thing but not sure. Hope this helps. -
I cant seem to open some photos on Iphoto. I downloaded like 3 months ago from my phone into the iphoto. I could access ALL of my photos back then but when I try and access them now I cant seem to open the file. When i open iphoto and open the folder thats on it, i can see ALL the photos that are there but when I click on different ones some appear in the larger screen but A LOT of them dont appear. Iphoto seems to have erased the file or I dont know.
Also I tried clicking on the photo that doesnt appear and making it "Reveal it on finder" - "original file" and it says 'The operation can’t be completed because the item can’t be found.".
I really want those photos because they involve a really special family vacation, please help me find those photosA LOT of them dont appear.
What do you see in the window when you click on those? A blank, black window? An exclamation mark? What? -
how do i reset my mac completely? I have parental controls and cant seem to get to time machine cause i bought the computer with parental controls on it and they did not have the password. How do i completely reset my macbook pro?
If you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps on this page will give you a reset link on your account : http://support.apple.com/kb/HT6170
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps on this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5620
Or, if it's available in your country, you could change to 2-step verification : http://support.apple.com/kb/HT5570 -
I cant seem to disable the Subtitles. I have tried on the iPad Settings and on the ATV settings, NOTHING!!
If they are actually rendered in the video then you can't turn them off. They are part of the image. That is controlle by the copyright holder. You can only turn them off if they are done as captions.
-
my iphone 4 keeps going into guided acess mode were i cant touch anything. i have for gotten my password and i cant seem to press the home button to go home. it tells me to put a password in but i have no clue. please HELPPPP!!!!!! im getting worried i have no clue whats going on. help and advice would be highly appriciated.
Just reset your phone:
Press the Sleep/Wake button & Home button at the same time, keep pressing until you see the Apple logo, then release.
This should let you use the phone normally, no restore needed. -
How do i download ios 5? I try and try but cant seem to find the download button. Sorry, i feel dumb.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
A first gen iPad should get updated to iOS 5.1.1, and an iPad 2 (and 3) to iOS 6 (iOS 6 will remove the built-in YouTube app and the Maps app will change) -
I have given my old iphone to my daughter however cant seem to disconnect the two phones. I use icloud. What do i do to stop her using my email address, no for facetime, sharing info, contacts and photos????
To wipe phone
Turn off imessage in settings/messages
Turn off Facetime in settings/Facetime
Delete icloud account in settings/icloud
Erase all data and settings in settings/general/reset
Delete the phone from your profile in https://supportprofile.apple.com if you registered your phone there -
I cant seem to find the authorise my computer in the itunes store, can anyone help?
I cant seem to find the authorise my computer button in the itues store, can anyone help?
It's in the Store drop-down menu - in iTunes 11 on a PC press Alt-S and the Store menu should appear e.g. from a Mac :
-
Cant seem to find the right forum, but I forget my security reset email info!
Cant seem to find the right forum, but I forget my security reset email info! I want to download apps and music to my macbook, I cant because I forgot my security question's answers(6+ years ago) Also the security reset email they have is one that I have never seen before! I cant buy anything... on my new mac. IM STUCK!
Then you are SoL until Apple's SNAFU is over, which could take another month for all God knows...
-
I am trying to sync my music library to my new iPhone 5C and cannot seem to get the music to sync. It is in the library but isn't going over to my phone.
I must be doing something wrong during the sync (something checked when it should not bet, etc) Need some help. Thanks!!Manually manage music is NOT checked. I backed up all my phone information from my old 3GS phone to my computer, then connected my new phone to sync. Everything else seems ok but music won't transfer. It is set to automatically sync when connected.
-
Have downloaded a song (Skyfall) and cant find it in the Artists or Album view.
Have downloaded a song (Skyfall) from the iTunes store and cant find it in the iTunes11 Artists or Album view. I find it when I search and can play it. I have tried adding the file manually to my library. Still no show. The song also doesn't show in my smart playlist - 'recently added'. Any help greatly appreciated.
Actual its not Photoshop menu (File > Edit > Presets > Preset Manager > Load)
It is menu Edit>Presets>Preset Manager... That should open the Preset manager dialog. You then need to use the pull-down menu and select tools. Then Click on Load. That should Open a Load file selection dialog. Where you should be able to select a *.TPL file and click Load. -
pro15-inch with a lion at the bottom of the system, my computer is not always closedmachine, has been a black and white, seems to read the disks that thing has beenturning away, how do ah (do not want to reload) to help solve it
What are you talking about?
-
Hello&Help, Ive just swapped to firefox from Windows explorer, When i download music from (soundcloud) i cant seem to save the files in to my music documents, it goes striaght to windows player, Is there any way i could change the setttings?? Cheers
Hey Miramo, Ive got it sorted now. :-)
Thanks for all ya help.
Maybe you are looking for
-
Device timed out. What does that mean?
I got this error message.. What does this mean?
-
Photo Booth 2 - audio working sporadically
I've used audio to create 1 minutes videos with the background effect and sound. All of a sudden today, the audio stopped working when I add the background. However, sometimes the audio works if I make a short video (under 25 seconds). When I go over
-
Bionic. post-ICS update. front facing camera pixelated/artifacts
Hello, After I updated to ICS, the front facing camera began showing weird pixelation/lines. this did not happen before the update. I reset my phone to factory settings and the camera till showed the following lines. any ideas? Verizon, please help
-
Hi Experts, I have configured the ATP rule for Planned Orders. So I only want to check the component stock and Production Orders when running ATP check for the Parent Material. In OPJJ, I only selected the following options. Include Safety Stock : Ti
-
■To restore the default ruler origin in JavaScript?
Is it possible to restore the default ruler origin by JS? In the UI I just double-click the upper-left corner where the rulers intersect. Thanks franK